EPC-2-D Spec Sheet - UL 924 Inverters and …€¦ · EPC-2-D automatically bypasses the normal...
2
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707 www.lvscontrols.com Project: Model No.: Comments: APPLICATION FEATURES MOUNTING LED COMPATIBLE U L ® UL924 LISTED C US 5 YEAR WARRANTY In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC-2-D, to convert normal light fixtures into approved emergency lights. The EPC-2-D saves energy and money while ensuring compliance with both life safety and energy codes. During normal operation, the same dimmer, occu- pancy sensor, dimming panel, or lighting control can switch and dim normal and emergency fixtures on and off simultaneously. During a utility power interruption, the EPC-2-D automatically bypasses the normal lighting controls, turning the emergency lights ON at full brightness, regardless of dimmer position. The EPC-2-D is ceiling or wall mounted in a junc- tion box with a single gang plaster ring and is usually located in the area where the emergency fixtures are installed. Unique, Patented Automatic Diagnostic Fire Alarm, Remote Test & 0-10V Dimming Option When the room switch is turned off, the EPC-2-D will run a 2.5 self-test routine, verifying that the emergency power source was available and that the EPC-2-D, ballast, and lamp(s) are all function- ing correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible locations, because the unit does not rely on access to its manual test switch. Utility & Emergency Power Indicator LED’s Slim, aractive flush mount profile allows easy access to manual test switch and LED’s. Isolated 0-10V relay contact ensures full bright- ness during utility power interruption, regardless of dimmer model. EPC-2-D Emergency Power Control For 0-10V & DALI Dimmable Loads 0-10 V Dimmer Compatible
Transcript of EPC-2-D Spec Sheet - UL 924 Inverters and …€¦ · EPC-2-D automatically bypasses the normal...
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.lvscontrols.com
Project:
Model No.:
Comments:
APPLICATION
FEATURES
MOUNTING
LED COMPATIBLE
UL®UL924 LISTEDC US
5YEAR
WARRANTY
In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC-2-D, to convert normal light fixtures into approved emergency lights. The EPC-2-D saves energy and money while ensuring compliance with both life safety and energy codes.
During normal operation, the same dimmer, occu-pancy sensor, dimming panel, or lighting control can switch and dim normal and emergency fixtures on and off simultaneously.
During a utility power interruption, the EPC-2-D automatically bypasses the normal lighting controls, turning the emergency lights ON at full brightness, regardless of dimmer position.
The EPC-2-D is ceiling or wall mounted in a junc-tion box with a single gang plaster ring and is usually located in the area where the emergency fixtures are installed.
Unique, Patented Automatic Diagnostic
Fire Alarm, Remote Test & 0-10V Dimming Option
When the room switch is turned off, the EPC-2-D will run a 2.5 self-test routine, verifying that the emergency power source was available and that the EPC-2-D, ballast, and lamp(s) are all function-ing correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible locations, because the unit does not rely on access to its manual test switch.
Utility & Emergency Power Indicator LED’sSlim, attractive flush mount profile allows easy access to manual test switch and LED’s.
Isolated 0-10V relay contact ensures full bright-ness during utility power interruption, regardless of dimmer model.
EPC-2-DEmergency Power ControlFor 0-10V & DALI Dimmable Loads
0-10 V Dimmer Compatible
Fire Alarm Tie-In/Overridewww.lvscontrols.com/assets/UL924FAI.pdf
Red Fire Alarm Jumper (see
additional resources)
SPECIFICATIONS
SINGLE LINE DRAWING
WIRING DIAGRAM
ORDERING INFORMATION ADDITIONAL RESOURCES
EPC-2-D Installation SheetFAQ SheetAlternative Wiring SheetTerms & Conditions/Warranty Information
20171010_LVUNV2
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.lvscontrols.com
DESIGNATEDEMERGENCY
LIGHTS
REGULAR ROOM LIGHTS
EPC-2-DCONTROL
UL 1008Transfer SwitchOr Equivalent
NormalUtility Power
Emergency Power Source
Neutral Not Shown
EPC-2-DCONTROL
NORMALPANEL
Normal Utility Power
EMERGENCYPANEL
$
EPC-2-D
ZONECONTROLLER
Photo-cell D
EMERGENCY HOT
#3 WHITE
NORMAL PANEL
20A
#2 RED
#1 BLACK
*
Relay Panel, Power Pack, Sensor, or other (optional)*
Normal Light (optional)
EMERGENCY PANEL OR INVERTER
20ANORMAL HOT
NORMAL NEUTRALEMERGENCY NEUTRAL
#4 WHITE/BLUE
#5 YELLOW
#6 BLUE
Emergency Light
Note: Emergency Light is also called N/E Light or Normal/Emergency
Light by many specifiers
VioletViolet
EMPOWER
TEST
UTILITYPOWER
MODEL NO.
SENSING INPUT
LOAD RATING
BALLAST LOAD RATING
INCANDESCENT LOAD
WARRANTY
EPC-2-D
120V - 277V
120V - 277V (20A)
20A (120-277V)
1200W (120V) / 1500W (277V)
5 Year Replacement Warranty
ELECTRICAL
MOUNTING
RATING
SHIPPING WEIGHT / COLOR
TEMPERATURE
FLUSH MOUNTED SIZE
BODY SIZE
4-11/16” Junction Box w/ single gang plaster
UL94-5VA
32ºF - 140ºF (0ºC - 60ºC)
MECHANICAL
12 oz. / White
Single Gang Size
1.7” x 3” x 1.2” (W x H x D body)
