engineering catalog catalog.pdfThe first to mold bowling bags from plastic... The first to mold...

Engineering Catalog

Inside are the parts and informationyou need to design the perfect case

for your particular needs.

The tools Benjamin Platt used are now onlyhistoric mementos. He used them as he becamethe first of three generations of Platts to serve busi-ness travelers and intrepid vacationers. 90-someyears have passed since he reached Ellis Island,USA, in 1904, fleeting the Czar’s heavy-handed ser-geants, escaping his involuntary military service toa new life in the New World.

He found it was not a difficult change fromcutting leather for Cossack saddle harnesses toshaping fine cowhides into sturdy suitcases andstylish bags. His new creations were well-suited toendure the rough handling that 1920-era tripsentailed. Rough roads, rougher treatment were thenorm.

If he were to see our plant today, GrandfatherBenjamin might regret that we no longer use hisreliable leather. But he would quickly appreciatethe new materials we use, and understand thattoday’s tough, well-designed cases do just what hisearly leather luggage did... serve, protect, survive.

We’re the company that introduced thefirst combination locks on luggage.

And the first cushioned handles...The first to use our own hardware...The first to mold bowling bags from plastic...The first to mold plastic end shells on catalog cases, a

technology breakthrough at the time...The first to mold a urethane pallet...We’ve evolved through several storefronts near the

tanning plants, through a manufacturing plant near theMcCormick Place Convention Center to today’s presentlocation near Chicago’s Midway Airport, convenient for ourout-of-town customers.

We don’t build them like they used to.We build them better.

The Platt Story Continues:

2

Standard Rib (SR) Parallel Rib (PR) No Rib (NR)

Heavy Duty Cases:

4

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

PartNumber

1210**14111514161116131712B17131813C**181518171913B20122014A**2014B**201622102212A2212B2216A**2216B221824162418**25172820**3222410T

Styles Available

SRPRPRPR

NRPRPR

SROTHERSR NR

PRPR

SR NRPRPRPR

NRNR

SR NRSR

PRPR

SR NRPR

SR NRSROTHER

Size

12” x9 1/2”14 1/4” x 9 1/2”14 1/4” x 13 3/4”16 1/2” x 11 1/4”15 3/4” x 13”17 1/4” x 11 1/4”17 1/2” x 13 1/4”18” x 12 5/8”18 1/4” x 15”18” x 17”18 3/4” x 13”20” x 12”19 1/2 x 13 1/4”19 1/2 x 13 3/4”19 3/4” x 15 3/4”21 3/4” x 9 3/4”20 3/4” x10 3/4”20 3/4” x10 3/4”21 1/4” x15 1/4”21 1/2” x15 1/2”21 5/8” x17 3/4”23 1/2” x15 1/8”23 1/4” x17 1/4”24 1/2” x16 1/2” 27 1/4” x19 1/4”31 1/2” x21 1/2”17 3/4” x14 3/4”

Min. Ht.Lid/base

2”2”2”2”2”2”2”2 1/2”3”2”2”2”2”2”2”2”2 1/2”7”2”2 1/2”2”2”2”2 1/2”2 1/2”2 1/2”3 1/4”

Max Ht.Lid/base

4”4 1/2”4 1/2”4”4 1/2”5”4”4 1/2”7 1/2”5 1/2”4”5”4 1/2”5 1/2”4”5 1/2”5”11”4 1/2”5 1/2”7 1/2”6”5 1/2”5”5 1/2”5 1/2”7” (ONLY)

CornerRadius

7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”

BumpersMolded in:

NONONOYESNOYES YESYES YESNONOYESNOYESYESYESNONONOYESYESNONOYESNONOYES

AvailableWheel & Handle

NONONONONONONONOYESNONONOYESNONONONONOYESNONONOYESNOYESNONO

Shell Molded In:ABS ~ POLY

YES YESYES YESYES YESNO YESYES YESYES YESYES YESYES YESNO YESYES YESYES YESYES YESNO YESYES YESYES YESYES YESYES YESNO YESNO YESYES YESYES YESYES YESNO YESYES YESNO YESNO YESNO YES

For flanged valance, add F after H in valance option (ie: HFM). Flanged valance cases are available withflange only or flange with holes, fixed fasteners, or floating fasteners for panel.

Additional sizes are continually being added. Contact Platt Engineering Department for latest addition(s). *Dimensions ar I.D. andapproximate. Actual size will vary based on material used and trim heights. **See Platt Standard Catalog or Engineering

Department for stock case availability.

Call 1-800-99 PLATT (997-5288) OR FAX: 1-773-838-2010

Hardware Options:

5

Valance Options-Heavy Duty Heavy DutyValanceExtrusionProfile Drawings:

.375”

.900”

.900”

.363” .363”

.375”

.625”.625”

.900”

.900”

HMT

HBTBlack with black tape, gasket

LBTBronze with black tape, gasket

LOC004Die-cast chromenon-lock

LOC005Die-cast chromekey lockLOC024Black


LOC019Die-cast chromekey-lock

STA001Light Duty

STA002Heavy Duty

LOC035Steeldraw-down forpadlock

LOC023Twist-draw valance-spanning, in recesseddish LARGE

HIN 123Steel nickel-plateslide-apart hinge

HIN07190o StopSpringloadedRiivet-on

LOC011

HIN02Clear anodized aluminumcontinuous hinge

HIN02Black anodized aluminumcontinuous hinge

STU001Steel nickel-plate rivet-on

STU001BSteel blackrivet-on

Other options available, see page 13.

LOC039Twist-draw LOC032

Twist-drawrivet-on withprovision forpadlock

LOC036Twist-draw valance-span-ning, with lock, inrecessed dish LARGE

PLAIN FLANGED

HAN011Die-cast chromeGolf grip

HAN011BDie-cast blackGolf grip

HAN009Stitched Vinyl oversteel core Screw onHAN007 Plain rivet onHAN008 Black rivet on

HAN018Molded polyetheleneRivet onHAN018BBlackHAN00590o StopSpringloaded in

LOC022Twist-drawvalance-spanning inrecesseddishSMALL

STU003Bell StudMetal

HM Mill finish gasket

Additional sizes are continually being added. Contact Platt Engineering Department for latest addition(s). *Dimensions ar I.D. and approximate. Actual size will varybased on material used and trim heights. **See Platt Standard Catalog or Engineering Department for stock case availability.

Call 1-800-99 PLATT (997-5288) OR FAX: 1-773-838-2010

Medium Duty Cases:

6

Standard Rib (SR) Parallel Rib (PR) No Rib (NR) Soft Molded (SM)

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

PartNumber

12081209121012111411151416081611161216131712A1712B17131813A1813C1813D18171913A1913B20122014A**2014B201622102212A2212B2216A**2216B221824162418**25172820

Styles Available

OTHERNR SM

SR NR SMOTHER

PRPR

SR NR SMPR

SR NR SMNR SMNR SMPRPR

SR NR SMSR NROTHERSR NR SMSR NR SM

PRPR

SR NR SMPRPRPRNR SMNR SM

SR NR SMSR

PRPR

SR NR SMPR

SR NR

Size

12” x 7 1/2”12” x 8 1/2”12” x 9 1/2”12 1/4” x 11”14 1/4” x 9 1/2”14 1/4” x 13 3/4”15 3/4” x 7 3/4”16 1/4” x 11”15 3/4” x 11 3/4”15 3/4” x 13”16 1/2” x 11 1/4”17 1/4 x 12 1/2”17 1/2 x 13 1/4”17 1/2” x 12 1/2”18” x 12 5/8”18” x 13”18” x 17”18 3/4” x 12 1/2”19” x 13 1/4”20” x 12”19 1/2” x 13 3/4”19 1/4” x 13 1/2”19 3/4” x 15 3/4”22” x 9 3/4” 20 1/2” x 10 1/2”20 1/2” x 10 1/2”21 1/2” x 15 1/4”21 1/2” x 15 1/2”21 3/8” x 17 3/4”23 1/2” x 15 1/8”23 1/4” x 17 1/4”25” x 16 3/4”27 1/4” x 19 1/4”

Min. Ht.Lid/base

1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”2”1 1/2”1 1/2”1 1/2”2”2”1 1/2”2 1/2”2”2”1 1/2”2”2”2”2”2”2”2 1/2”7”2”2 1/2”2”2”2”2 1/2”2 1/2”

Max Ht.Lid/base

4 3/4”4 3/4”5”4 3/4”5 1/2”5 1/2”4 3/4”5”4 3/4”5 1/2”4 3/4”6”5”4 3/4”5 1/2”4”6 1/2”4 1/4”5”6”5 1/2”6 1/2”6”6 1/2”7”11”5 1/2” 6 1/2”8 1/2”7”6 1/2”6”6 1/2”

CornerRadius

3/4”3/4”7/8”7/8”7/8”7/8”7/16”7/8”1 3/4”7/8”7/16”7/8”7/8”7/16”7/8”7/8”7/8”1 3/4”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”

BumpersMolded in:

NONONONONONOYESYES NONONOYESYESYESYESYESNONONOYESNOYESYESYESNONONOYESYESNONOYESNO


YES NOYES NOYES YESYES NOYES YESYES YESYES NONO YESYES NOYES YESYES NOYES YESYES YESYES NOYES YESOTHERYES YESYES NOYES YESYES YESYES YESYES YESYES YESYES YESYES YESNO YESYES YESYES YESYES YESYES YESYES YESYES YESYES YES

Hardware Options:

7

Valance Options-Medium Duty

MMTMill finish with black tape

MBTBlack anodized with black tape

MBRTBronze anodized with black tape

STA001Light Duty

STA002Heavy Duty


HIN 123Steel nickelplate slide-apart hinge

HIN 123Steel nickelplate slide-apart hinge

LOC011Combo lock black

LOC009 Set Line No Combo


.265”.390”

.265”

1.365”

.875”

LOC017Steel nickel-plate draw-down lock

HIN 011.5StainlessSteel hinge

HAN006Black plastic withcushioned grip,screw-onHAN018MoldedPolyetheleneRivet on



HAN009Stitched Vinyl oversteel core Screw onHAN007Plain rivet onHAN008

HIN011Stanless Steel Continuous Hinge



LOC010 Set Line WithCombo




LOC019Die-cast chromekey-lock

LOC033 LOC034

HAN020 Molded Plastic. (Must be ordered as a set)

Medium DutyValanceExtrusionProfile Drawings:

Light Duty Cases:

8

Standard Rib (SR) Parallel Rib (PR) No Rib (NR) Soft Molded (SM)

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

PartNumber

1007**12081209**121012111411151416081611161216131712A**1712B17131813A**1813C1813D18171913A1913B20122014A2014B201622102212A2216A22182416241825172820

Styles Available

NR SMOTHER

NR SMSR NR SMOTHER

PRPR

SR NRPR

SR NR SMNR SMNR SMPRPR

SR NR SMSROTHERSR NR SMSR NR SM

PRPR

SR NR SMPRPRPRNR SM

SR NR SMPRPR

SR MR SMPR

SR NR

Size

9 1/2” x 6 1/2”12” x 7 1/2”12” x 8 1/2”12” x 9 1/2”12 1/4” x 11”14 1/4” x 9 1/2”14 1/4” x 13 3/4”15 3/4” x 7 3/4”16 1/4” x 11”15 3/4” x 11 3/4”15 3/4” x 13”16 1/2” x 11 1/4”17 1/4 x 12 1/2”17 1/2 x 13 1/4”17 1/2” x 12 1/2”18” x 12 5/8”18” x 13”18” x 17”18 3/4” x 12 1/2”19” x 13 1/4”20” x 12”19 1/2” x 13 3/4”19 1/4” x 13 1/2”20” x 16”22” x 9 3/4” 20 3/4” x 10 3/4”21 3/4” x 15 3/4”21 3/4” x 17 3/4”24” x 15 3/4”24” x 18”25” x 16 3/4”28” x 20”

Min. Ht.Lid/base

1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”2”1 1/2”1 1/2”1 1/2”2”2”1 1/2”2 1/2”2”2”2”2”2”2”2”2”2”2”2”2”2”2”2 1/2”2 1/2”

Max Ht.Lid/base

4”3 3/4”3 3/4”4”3 3/4”4 1/2”4 1/2”3 3/4”4”3 3/4”4 1/2”3 3/4”5”4”3 3/4”4 1/2”3”5 1/2”3 1/4”4”5”4 1/2”5 1/2”5”5 1/2”6”4 1/2” 7 1/2”6”5 1/2”5”5 1/2”

CornerRadius

5/8”3/4”3/4”7/8”7/8”7/8”7/8”7/16”7/8”1 3/4””7/8”7/16”7/8”7/8”7/16”7/8”7/8”7/8”1 3/4”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”

BumpersMolded in:

NONONONONONONOYES YESNONOYESYESYESYESYESYESNONONOYESNOYESYESYESNONOYESNONOYESNO


YES YESYES NOYES NOYES YESYES NOYES YESYES YESYES NONO YESYES NOYES YESNO NOYES YESYES YESYES NOYES YESOTHERYES NOYES NOYES YESYES YESYES NOYES NOYES NOYES YESYES YESYES NOYES NOYES NOYES NOYES NOYES NO

Additional sizes are continually being added. Contact Platt Engineering Department for latest addition(s). *Dimensions ar I.D. and approximate. Actual size will varybased on material used and trim heights. **See Platt Standard Catalog or Engineering Department for stock case availability.

Call 1-800-99 PLATT (997-5288) OR FAX: 1-773-838-2010

Valance Options-Light Duty

Hardware Options:

9

Light DutyValanceExtrusionProfile Drawings:

.265”

.390”

.390”

LMMill finish

LMTMill finish with black tape

LBTBlack with black tape



HAN009Stitched Vinyl oversteel core Screw onHAN007 Plain rivet onHAN008 Black rivet on

HAN018Molded polyetheleneRivet onHAN018BBlack

HAN006Black plastic withcushioned grip,




LOC019Die-cast chrome

HIN051Nickelplatestop hinge

LOC016Steel nickel-plate draw-down latch

LOC013Flip-downcombo lock

LOC012Flip-downcombo lock

LOC017Steel nickel-plate draw-down lock

LOC002Steel nickel-plate flip-

STA001Light Duty

STA002Heavy Duty


HIN071Nickelplaterivet-on

LOC011Combo lock black

HIN02




HARDWARE OPTIONS

Guardsman® ATA Cases:

10

PPllaatttt’’ss PPaatteenntteedd GGuuaarrddssmmaann AATTAA RReeuussaabbllee SShhiippppiinngg CCoonnttaaiinneerrssaarree bbuuiilltt ttoo eexxcceeeedd tthhee eexxaaccttiinngg AATTAA sshhiippppiinngg rreeqquuiirreemmeennttss..They have been tested and approved to ATA 300specs.

They’re constructed from an uullttrraa-dduurraabbllee ((yyeettlliigghhtt-wweeiigghhtt)) ppoollyyeetthhyylleennee mmaatteerriiaall with your choice of sixstandard colors. They’re lliinnee bbeenntt ttoo aassssuurree uunniiffoorrmmtthhiicckknneessss aanndd uunnssuurrppaasssseedd ssttrreennggtthh.. By using polyethylene,these cases are uupp ttoo 5500%% lliigghhtteerr than traditional woodtransit cases, and because they are bent instead offormed, all corners and edges are the same thicknessas the rest of the case, thereby eliminating thetraditional weak spots associated with other materials.

Polyethylene can be stored in any environ-ment from -40o to 140o, and is unaffected by

all common industrial solvents. Plus, ourbent aluminum continuous framing systemprovides the ultimate in strength, andattractive appearance. Our valance systemhas a gasket for water/dust resistance.Platt uses completely recessed hardwarewhich further resists damage in transit, andcan be furnished with

combination locks or keylocks in the latches.Cases can be lined

with foam, or have interiorsto meet your require-ments.

Platt’s EngineeringDepartment will assistyou in the design ofyour Guardsman ATAcase.

Available in black, blue, gray, green, yellowand orange. Other colors may be availablewith minimum quantities.

HM Heavy-duty mill finishValance with gasket

LOC011 Combo lock, black

CAST012” WheelSwivel caster

CAST022 1/2” WheelFixed caster

CAST032 1/2” Wheel

HDW007SteelNickelplate,Rivet-on

STU001SteelNickelplateRivet-on

HIN123SteelNickelplateslide-aparthinge

LOC022Twist-drawvalancespanning inrecessed dish SMALL

LOC023Twist-drawvalance-spanning, inrecessed dishLARGE

HAN 00590o Stop Springloadedin recessed dish

HAN 01790o Stop SpringloadedRivet-on

LOC036Twist-drawvalance-spanning, withlock in recesseddish LARGE

THW001Steel TelescopingHandle with 4ballbearingrecessed rubberwheels

STA003Nickelplate,Steel

Company Name: ______________________________________________________________________Address: ____________________________________________________________________________

____________________________________________________________________________________Contact: ____________________________________________________________________________Phone Number: _________________________________ Fax Number: __________________________Request for quote: ______________________________ Order: ________________________________

Quantity:

___________________ Case Selected: ____________________________________________________

T=TrunkD=Deep Removable LidO=Other

with a shallow body

B=Briefcase

Color: Black ____ Gray ____ Blue ____ Yellow ____ Orange ____ Green ____ Other______________Cavity Size or Usable Space Needed (Inside foam lining)L-R ______________ F-B ______________ Lid Depth ______________ Base Depth ______________Hardware:

Latch ______________ QTY _____ Handle ______________ QTY _____Hinge ______________ QTY _____ Lid Stay ______________Combo Lock? Yes _____ No _____ Telescoping Handle & Wheels? Yes _____ No _____Casters _____________ Qty _____ Other ____________________________________________

Name Plate _________________________ Label Plate (5”x8”) ________________________________(Must supply camera-ready artwork to size, and note position on case for logos or nameplates.)Other options ______________________________________________________________________

______________________________________________________________________Foam Lining? Yes _____ No _____

Charcoal Cross-linked Polyethylene 1/2” _____ 1” _____ 1 1/2” _____ 2” _____ Other _____Charcoal Ester Urethane 1/2” _____ 1” _____ 2” _____ 3” _____ Other _____Pink Anti-Static 1/2” _____ 1” _____ 1 1/2” _____ 2” _____ Other _____

Custom Foam? Yes _____ No _____For a quote on custom foam, it will be necessary to provide a foam layout drawing, a list of items to be in

Design a Guardsman® Case:

11

Company Name: ______________________________________________________________________Address: ____________________________________________________________________________

____________________________________________________________________________________Contact: ____________________________________________________________________________Phone Number: _________________________________ Fax Number: __________________________Request for quote: ______________________________ Order: ________________________________Quantity (25 or more): ___________________

Determine whether you want a Light-Duty, Medium Duty, or Heavy-Duty case. Turn to appropriate sectionof the catalog. (For Guardsman ATA Cases, see order information in Guardsman section.) Make selec-tions below from information in this Engineering Catalog.

Part Number: ______________________________ Shell Style: ________________________________

Length: ___________________________________ Width: ____________________________________

Lid Depth: ________________________________ Base Depth: ________________________________

Length

Width

Material: ABS _____ POLY _____ SM (Available LD and MD only) ___________Color: (Black if not specified) ______________________________(Contact Platt Engineering Department for color options and minimums.)Valance Type: ___________________________Hardware:

Latch ______________ QTY _____ Handle ______________ QTY _____Hinge ______________ QTY _____ Lid Stay _____________ QTY _____Combo Lock? Yes _____ No _____

If No, please specify _____________ QTY _____Other Hardware __________________________________________________________________

Silk-screen Logo _______________ Name Plate ________________ Molded-in Logo ______________(Must supply camera-ready artwork to size, and note position on case for logos or nameplates.)Foam: Yes _____ No _____For a quote on custom foam, it will be necessary to provide a foam drawing, a list of items to be in foam(with dimensions and weights) or furnish the items to Platt so we can do design. Your loval Platt sales repwill be able to assist you also. Fax this form to Platt Luggage and we will provide a quote or designassistance.

Design Your Molded Case:

12

LidDepthBaseDepth

Options & Accessories:Shown are just some of the options that Platt can furnish. Please contact our Engineering Department for availability.

13

Platt can die-cut customfoam or mold custom inserts.

Molded in, or silk-screened logos can be furnished on your case.

Platt can furnish custom doors, dividers, or toolpallets for your case.

Shoulder straps, of course, can be furnished on all cases.

We have standard litera-ture pockets which canbe added to your case, orwe can design a custompocket for you.

Platt can furnish a wide variety of colorful customnameplates for you case.

Limited Space prevents us from showing all options available. However, a call to Platt’s Engineering Department at (1-800-997-5288) will help you quicklydetermine whether your special option need can be done, or perhaps we can suggest a viable alternative. If you don’t ask us, you’ll never know if we can buildyour case your way!

Other Case Options:Soft-sewn:Platt Luggage, the company thatstarted life sewing leather harnessand then moved into sewn leatherluggage, still makes sewn cases of all

types today.The design options are almost

unlimited. In addition to Soft-sewn cases, we produce pouches, pockets,padded cases, foam-filled soft cases, plus numerous other workplace styles.

We work primarily with Cordura and coated vinyl, but other materials are available in a wide range ofcolors, depending on your application and your preference.

Blow-Molded:Platt also has a full line of blow-molded cases. These are

manufactured from prime, high-density black polyehtlylene,with double wall construction. Their textured exteriorsresist dents, cracking and scuffing. These shells are unaf-fected by extreme temperatures.

Their hardware featuresmechanical latcheswhich are field-replaceable, and amechanical hinge sys-tem that lasts extremelywell. All cases meet U.S.94B Specifications as an electricalinsulator, and are impervious to chemical attack. Some sizes can be

purchased as stock “make-your-own” cases from our national andinternational network of knowledgeable distributors.

Please contact our Engineering Department, to discuss your application and to customizea blow-molded case to meet your requirements.

4051 W. 51st Street, Chicago, IL 60632-42111-800-99 PLATT (997-5288) FAX: 1-773-838-2010

www.PLATT CASES.com

ENG00-114

engineering catalog catalog.pdfThe first to mold bowling bags from plastic... The first to mold...

Documents

Transcript of engineering catalog catalog.pdfThe first to mold bowling bags from plastic... The first to mold...