0534

B G

BT

1116

©2016 Erentek Ltd.

Emergency Trailer Braking SystemFor Agricultural Trailers with Hydraulic Brakes

Kit Part Number: ETK001

All the items shown in the picture are included in the kit.

Hydraulic hoses are also required and can be ordered to length.

The ETK001 Emergency Trailer Braking System fits any drawbar trailer with hydraulic brakes and is designed to apply the trailer brakes if there if a sudden loss of connection between the tractor and the trailer, in the event of a breakaway for instance.An emergency accumulator containing pressurised hydraulic fluid is fitted to the trailer. Also fitted to the trailer, on the drawbar, is an emergency brake valve. On the back of the tractor is a steel cable, the other end of which is loosely connected to the operating lever on the valve. If the tractor parts company with the trailer this cable is pulled tight, rotating the oper-ating spindle on the valve and allowing pressurised fluid from the emergency accumulator to apply the trailer brakes. The operating lever also functions as a quick-release clip and is pulled clear as tension on the cable increases. The accumulator is then recharged once the braking system is reconnected and the valve is reset to its normal running position.For more information, please contact our technical department on 01522 720065.

Quick-Release Hydraulic Connection, Tractor

Quick-Release Hydraulic Connection, Trailer

Bracket can be welded to trailer drawbar.

Mounting Bracket for Hydraulic Coupling

Mounting Bracket for Emergency Brake Valve

Mounting Bracket for Emergency Accumulator

Emergency Brake Valve

Emergency Accumulator

Operating Lever and Quick-Release Clip

Pressure-Relief Button

Bracket can be welded to trailer drawbar.

Bracket can be welded to trailer drawbar.

®

Tomorrow's Solutions, Today