EMC-RPA Replication of LUNs
-
Upload
kaverisonu -
Category
Documents
-
view
229 -
download
0
Transcript of EMC-RPA Replication of LUNs
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 1/12
EMC-RP Replication of LUNs
Login to the EMC Unisphere, login to the storage by selecting the storage either from drop down or from the list.
Go to storage and select LUN
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 2/12
Click on Create > and provide the required Name and Size and select “Thin” for allocating the LUNs as with
Thin provisioning. And click Apply
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 3/12
Similarly create all required LUNs in DR site and Create Journal LUNs in both Production and DR site.
At Production site, we can create Journal LUN for of size 10 GB, but in DR site best practice is to create aJournal of size of 10% of the LUN which we need to replicate.
One from Unisphere: Go to Data Protection > Select Recover Point -> We need to login with local admin toUnisphere to work this
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 4/12
1.1 RecoverPoint Management Application
1.2 Creating the Consistency Group
Select the Consistency Group and > Right click and select the Add group
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 5/12
Create consistency GroupsName # Provide server name (for one server we can have one group, but free to create more as pre requirement)
1ry RPA: Select RPA based on the load balance (Select alternating RPA for each group or best way to balanceload)
Bandwidth Reduction: Medium
Enable dedupe - yes
Protection - Asyn
RPO - select -> System optimized lag
Resource allocation :
Priority : Normal
Bandwidth Limitation : select limited -> select 500 Mbps
Stretch Cluster /VMware SRM -> None
Advance - no change
Make sure allow data transfer if RPA is failed
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 6/12
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 7/12
1.3 Production copy: Configuration for Consistency group
Name# hostname_Prod ( Provide server name _Prod )
Journal comp -> none
Protection :
Enable Recovery port snapshot consolidation:
Do not consolidate for at least 24 hours:
Older than 2days : 5 days
1 weeks to one snapshot -> 0
Select Advance and select Host Os as Windows:
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 8/12
Replica Copies Configuration:
Here we have two options : One for Local copy and Another for Remote Copy . Select Remote copy as we needto replicate
Provide Name and other details similar to the Production copy configuration.
Replication Sets : Select LUNs for replicating
Then click Next and Select DE LUN on which we need to replicate the Data
Journals ( Adding / creating Journals )
If we have already created the Journals , select manually select Journal Volumes ( recommended )
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 9/12
Select the Production site Journal ( generally of 10 GB size, always give LUN name correctly while creating toidentify properly )
Select the DR site Journal ( 10% in size of LUN which we need to replicate)
Click next and see the Summary
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 10/12
Note# if you don‟t want to start the replication immediately , removes the tick mark. And then Apply.
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 11/12
8/12/2019 EMC-RPA Replication of LUNs
http://slidepdf.com/reader/full/emc-rpa-replication-of-luns 12/12
Once done with the Initial copy the Pair status will become “Active” . Then you can s tart using the DR LUNs ( Willallow you to do Image access )