Eltek Flat Pack 2

1

PRODUCTOVERVIEW

14 ELTEK DC POWER SYSTEMS COVER THE ENTIRE RANGE OF APPLICATION AREAS WITHIN THE TELECOMMUNICATIONS IN-DUSTRY. A TYPICAL DC POWER SYSTEM INCLUDES REC TIFIERS, CONTROL AND MONITORING MODULES, AC DISTRIBUTION FOR RECTIFIER INPUT, DC DISTRIBUTION, BATTERIES, AND LOW VOLTAGE DISCONNECT OPTIONS.

Flatpack2 Integrated systems p. 16/ Flatpack2 Cabinetized systems p. 17/ Flatpack2 UL Cabinetized systems p. 18/ Flatpack systems p. 19/ Flatpack UL systems p. 20/ Powerpack systems p. 21

DC POWER SYSTEMS>

SYSTEM MONITORS28>ELTEK OFFERS MONITORING PRODUCTS THAT ARE EASILY INTEGRATED INTO AN EXISTING TELECOMMUNICATIONS NETWORK INFRASTRUCTURE USING PROVEN, STABLE AND SECURE TECHNOLOGIES AND GLOBALLY ACCEPTED COMMU-NICATIONS PROTOCOLS.

Smartpack p. 29/ Smartnode p. 30/ Flatpack MCU p. 30/ WebPower p. 31/ PowerSuite p. 31/ WinPower p. 31

ONE STEP AHEAD WITH POWERFUL TECHNOLOGY

THE RECTIFIER WILL ALWAYS BE THE CORE COMPONENT, THE “HEART” OF A DC POWER SYSTEM. ELTEK THEREFORE DEVOTES MUCH OF ITS R&D EFFORTS TO THE DEVELOPMENT OF NEW STATE-OF-THE-ART DESIGNS, WHICH HAVE THE QUALITY AND THE FUNCTIONALITY EXPECTED IN MODERN TELECOM MUNI-CATION NETWORK.

Flatpack2 p. 23/ Flatpack 1500 family p. 24/ Flatpack2500 p. 25/Slimpack p. 25/ Flatpack DC/DC converter family p. 26/ Powerpack p. 27

22>

RECTIFIERSAND CONVERTERS

At Eltek, we are committed to meeting the power needs of the telecom industry. This catalogue represents an overview of our extensive range of products and solutions designed to match any power requirement. They all refl ect our commitment and our vision “to become the global center of excellence in telecom power.”

40>Global Service Offer p. 40/ Certifi cations Matrix p. 41/ Abbreviations p. 42

SERVICES AND OTHER INFORMATION

36>A GROWING NUMBER OF TELECOM INSTALLATIONS ARE PLACED IN OUTDOOR CABINETS. ELTEK HAS DEVELOPED ITS SERIES OF OUTDOOR CABINETS TO MEET THIS REQUIREMENT. WE HAVE ALSO DEVELOPED VARIOUS SPECIFIC OUTDOOR ENCLOSURES FOR APPLICATIONS SUCH AS DSLAM EQUIP-MENT, FIBER/COAX SPLITTERS, CONNECTION AND DISTRI-BUTION; ALL WITH INTEGRATED POWER.

Standard solutions p. 37/ Regional solutions – Asia Pacifi c p. 38/ Regional solutions – Americas p. 39

OUTDOORSOLUTIONS

>32 REMOTE POWER IS A CONCEPT FOR DISTRIBUTING DC POWER FROM A CENTRAL OFFICE OVER EXISTING TWISTED PAIRS TO REMOTE CABINET LOCATIONS. THE CONCEPT IS PERFECT FOR USE IN BROADBAND APPLICATIONS WITH NEW “HIGH-BANDWIDTH SERVICES.” USING THE EXISTING COPPER IN THE GROUND BETWEEN THE CENTRAL OFFICE PLANT AND REMOTE SITE, POWER CAN BE DELIVERED TO THE xDSL EQUIPMENT (DSLAM), WHICH IS USUALLY LOCATED CLOSER TO THE END USER.

Flatpack RPS Integrated systems p. 34/ Flatpack VA limiter p. 34/ Remote End Converter p. 35/ Flatpack RPS Cabinetized systems p. 35

REMOTE POWER

All specifi cations are subject to change without notice. All images in

this catalogue are for representational purposes only, actual products may differ.

FIXED NETWORK

Eltek’s product portfolio covers applications in the fi xed network all the way from the large Central Offi ce/Exchange plants to small Roadside cabinets. All products bear global approvals and solutions are adapted to local requirements.

APPLICATIONS

Central Offi ce

localexchange

localexchange

Road side cabinet/small sites

OUTDOOR

INDOOR

Road side cabinet/small sites

Typically >50kW Powerpack and Flatpack2 Cabinetized systems

Typically 30-50kW Flatpack2 Cabinetized systems

Typically < 30kW Flatpack2 Cabinetized, Integrated and Outdoor systems

Core NetworkRNC - Radio Network ControllerRBS - Radio Base Station

RBSNetworkManagement

RBS

RBS

RBS

Typically >50kW Powerpack and Flatpack2 Cabinetized systems

APPLICATIONS

Typically 30-50kW Flatpack2 Cabinetized systems

Typically < 30kW Flatpack2 Cabinetized, Integrated and Outdoor systems

Eltek R&D resources have been focused on developing products that meet requirements of mobile operators for many years. Eltek’s product portfolio now includes a variety of compact and extremely cost -effi cient solutions for mobile networks.

MOBILE NETWORK

RNC

RNC

RNC

6

The Flatpack2 power system embodies Eltek’s vision to be the product leader within the DC Power industry. The combination of cost-effective design, power density and reliability makes it a product that truly stands out in the global market. The versatility of the Flatpack2 rectifi er means that it can be used in a wide variety of 48VDC and 24VDC applications across the globe. Stand out in your market by providing network availability beyond your customers' expec tations with a superior Flatpack2 power system.

FLATPACK2

LEADER OF THE PACK

7

Cost-effective solutions for any applicationThe design of Flatpack2 allows for very compact and cost-effi cient total solutions.

Eltek's standard portfolio includes systems for integration into customer cabinets and a selection of complete systems in a variety of cabinets, indoor as well as outdoor. Total

system power ranges from 2kW to more than 100kW making the Flatpack2 suitable for most applications in any telecom network. Eltek’s standard product range is fl exible and

allows for a great deal of customization. This allows us to meet most custom require-ments fast and cost-effectively. For more information see page 23.

More for lessGet more power in less volume with our state-of-the-art rectifi er design. Having

less volume means more space for your batteries and telecom equipment. The wide diversity of Flatpack2 means you can cover more applications with less

variations, thus reducing your investment, logistics and maintenance costs.

8

For larger power needs the Powerpack rectifi er once again demonstrates Eltek’s technological leadership. The Powerpack is a true three-phase rectifi er, providing unity power factor without having to connect to a neutral conductor. Cost of ownership is optimized through compact and reliable design with high effi ciency. Powerpack rectifi er is available in three different versions, optimized for different input voltages: 480VAC, 380/400VAC and 208/240VAC.

POWER TO PERFORM

POWERPACK

9

Bulk power and distributed power solutionsThe Powerpack rectifi er is an optimum building block for the big Central Offi ce 48VDC power plants, which are typically ranging

from 2000A to 10 000A. In our bulk power solutions, the separate rectifi er and distribution cabinets are connected via an overhead 48VDC bus structure. Whilst in our distributed power solutions,

the rectifi ers, primary distribution and any slave control units are in one cabinet, making it a self-contained power system.

In a bulk power system, an entire 10 000A plant can be control-led by one single Smartpack control module. Using a high speed

CAN-bus with a proprietary protocol for system communication, signal wiring between cabinets is minimized. Load sharing

between rectifi ers is also done via the CAN-bus, independent of the control module.

In a distributed system, several control modules are connected to the same CAN-bus, forming a fl exible and expandable

control system, yet seen as one large control unit from the Windows or Web graphical user interfaces.

For more information see page 27.

10

Smartpack is a scalable control module for Eltek power systems. Its modular design can be optimized against different requirements with minimum impact on cost. The Smartpack offers full functionality required in modern and future DC power systems.

SMART MONITORING

SYSTEM MANAGEMENT

11

The Smartpack controller communicates over a CAN-bus to rectifi ers and other peripherals in the system. This provides full control and monitoring of rectifi ers and other system elements. The

Smartpack module has an advanced system monitoring with multilevel access and a comprehensive battery management. To meet the demand for reduced operating cost, the Smartpack offers various

channels for remote management, such as Web, SNMP, SMS, e-mail and modem. For more information see page 29.

12

Eltek’s Remote Power concept represents a very cost effective way of providing stable DC power to remote sites. The concept is in line with the industry standards by using existing twisted pairs to transfer DC power to remote sites.

Using Remote Power removes the need for new cabling in the ground, annual utility fees and remote site DC power systems with battery backup. The benefi ts of Remote Power are thus numerous ranging from reduced hardware expenses, easy maintenance routines and usually faster roll-outs.

Remote Power is achieved through safe transfer of higher DC voltages (±190VDC) on standard twisted pairs. At the remote site, this voltage is converted back to 48VDC to supply the telecom equipment. For more information see page 32.

TURNING YOUR COPPER INTO GOLD

REMOTE POWER

The Remote Power concept utilizes the copper in the ground to transmit power from central sites with battery backup. Utilizing high DC voltage, though still safe, typical DSLAM equipment can be up to 10 kilometers away from the Central Offi ce plant.

CENTRAL OFFICE

REMOTE DSLAM NODE

REMOTE DSLAM NODE

REMOTE DSLAM NODE

REMOTE DSLAM NODE

14

DC POWER SYSTEMS

This section outlines the standard DC power systems offered by Eltek. Our systems cover the entire range of application areas within the telecommunications industry. A typical DC power system includes rectifi ers, control and monitoring modules, AC distribution for rectifi er input, DC distribution, batteries and Low Voltage Disconnect options. All our systems use state-of-art hot plug-in switchmode rectifi ers allowing for easier system upgrades. Multiple rectifi ers operate in parallel to ensure redundant operation.

14

15

FLATPACK2 SYSTEMS

INTEGRATED SOLUTIONSFlatpack2 offers a range of Integrated systems up to 600A. These are compact DC systems with all the functionality of larger systems in extremely dense packages. These can be mounted in any indoor or outdoor solution.

Extremely compact solutions capable of providing up to 32kW are designed for mounting in 19" or ETSI cabinets. A fl exible range of standard solutions is available with short lead times and competi-tive prices.

CABINETIZED SOLUTIONSComplete systems with or without room for batteries are available within a variety of cabinets. These vary in height and depth to suit available space and battery sizes.

We can offer wall mounted cabinets and fl at packed cabinets that can be assembled on site, perfect for those hard to reach locations. Power range of cabinetized solutions is typically up to 32kW systems with batteries and 100kW or more without batteries.

OUTDOOR SOLUTIONSA growing number of telecom installations are in outdoor cabinets. Eltek has a full range of outdoor cabinets with heat management based on fan, heat exchanger or air condi-tioning available in 1.3 and 2m heights. Other outdoor products such as smaller pole mount or wall mount enclosures are also available. Different sizes and cooling methods are available to meet the spectrum of requirements. With the extremely compact rectifi er module, we have created solutions for a high degree of integration with other equipment.

16

DC POWERSYSTEMS

FLATPACK2 INTEGRATED SYSTEMS

The Flatpack2 Integrated system has been specifi cally designed to meet the demand for higher density and more compact power solutions for integration into other equip-ment. It is suitable for applications needing an expandable, easily serviceable and reliable power supply, fi tting within a minimal space.

Flatpack2 Integrated is a range of compact power systems containing a Monitoring and Control Unit (Smartpack), LVDs, battery connections and load distribution. A variety of sizes are available to match free space, output power and functionality. Switchmode technology with resonant topology and high switching frequency is used to minimize volume and weight and to obtain high reliability. The system accepts large variations on the input voltage (85-300VAC) and draws sinusoidal current with a soft start power-up. Flatpack2 Integrated solutions can be used in any mobile or fi xed application from 2kW and up to 32kW, 24 or 48VDC.

KEY FEATURESHighest system power densityIndustry-leading power effi ciency is achieved using resonant topology, which contributes to the rectifi er’s compact design.Heat managementFront-to-back air fl ow with chassis-integrated heat sinks gives the module the most suitable working environment and no limitations in the scalability of the desired system solution.Plug-and-PlayA true plug-and-play connection system: reduces downtime thus improving system availability.Advanced battery managementThe built-in controller provides a very comprehensive battery monitoring which provides necessary alerts and graphic representation of battery status.Temperature compensated chargingBattery lifetime is maximized through temperature controlled charging (optimized for battery manufacturer and model).

OPTIONSBattery symmetry Integrated Web solutions with SNMP19" or ETSI mountingCabling kitsLow Voltage Load DisconnectLow Voltage Battery DisconnectPlug-in distribution positions

Flatpack2 100A UL Integrated power system

Flatpack2 2U Integrated power system

Flatpack2 6U Integrated power system with front cover removed

Flatpack2 6U Integrated power system

17

DC POWERSYSTEMS

FLATPACK2 CABINETIZED SYSTEMS

Flatpack2 Cabinetized solutions have been designed to meet the increasing demand for more compact solutions. With the compact rectifi er module, new standards are set for how much power and battery buildup can be fi tted into a single cabinet. A typical Flatpack2 power system contains Flatpack2 rectifi ers, Smartpack controller, batteries, LVD options, AC and DC distri-butions of appropriate size and confi guration. Flatpack2 Cabinetized solutions can be used in any mobile or fi xed line application from 2kW and up to more than 100kW, 24 or 48VDC.

KEY FEATURESHighest system power densityIndustry-leading power effi ciency is achieved using resonant topology, which contributes to the rectifi er’s compact design.Heat managementFront-to-back air fl ow with chassis-integrated heat sinks gives the module the most suitable working environment and no limitations in the scalability of the desired system solution.Plug-and-PlayA true plug-and-play connection system: reduces downtime thus improving system availability.Advanced battery managementThe built-in controller provides a very comprehensive battery monitoring which provides necessary alerts and graphic represen tation of battery status.Flexible solutions up to 100kWThe compact design allows for complete solutions up to 100kW within a single cabinet.Confi gurable AC inputFull fl exibility with on site confi gurable AC input.

OPTIONSTemperature compensated chargingBattery symmetry Integrated Web solutions with SNMPCabinetsCabling kitsLow Voltage Load DisconnectLow Voltage Battery DisconnectCustomized DC distribution

AVAILABLE MODELSWidth: 0.6m Height: from 0.8m to 2.2mDepth: 0.4 or 0.6m

Flatpack2 Cabinetized power system

Flatpack2 Cabinetized power systemwith front cover removed

18

DC POWERSYSTEMS

FLATPACK2 UL CABINETIZED SYSTEMS

600A Flatpack2 Integrated power system

The 600A Flatpack2 Cabinetized power system is ideal for applications needing a higher power requirement.

This system is designed for minimal space consumption. It can be provided in an open frame relay rack with four pre-wired battery trays or as an extremely compact system for integration into out-door enclosure or other cabinets.

A high degree of fl exibility makes it easy to meet most customer requirements fast and cost-effi cient. It has a wide application range in both mobile and fi xed networks.

KEY FEATURESCompact system design in <10UUp to 19 rectifi ers(24) Plug-in variable bus distribution positions Optional 3 tier load sheddingSmartpack controllerOptional Smartconnect drawer with RJ45 web interface and form “A” alarm contacts

OPTIONSTemperature compensated charging Battery symmetryIntegrated Web solutions with SNMPOpen frame or Cabinetized, optional Zone 4Cabling kitsLow Voltage Load DisconnectLow Voltage Battery DisconnectCustomized DC distribution

Flatpack2 600A Cabinetized power system

19

DC POWERSYSTEMS

The installed base of Flatpack systems is more than 100 000 systems. These systems are installed on fi ve continents and under different climatic and electrical conditions. A typical Flatpack power system contains Flatpack rectifi ers, Flatpack MCU, batteries, LVD options, AC and DC distributions of appropriate size and confi guration.

The building block philosophy enables Eltek to tailor highly advanced power systems according to customer requirements in short timescale and at low cost. Flatpack systems can be delivered as rack mountable units, or in cabinets of different sizes with optional space for internal batteries.

Flatpack MPSU/PRS/PRSB solutions can be used in any mobile or fi xed application from 1.5kW and up to 60kW, 24, 48 or 60VDC.

KEY FEATURESMonitoring and Control Unit (Flatpack MCU) Low Voltage Load DisconnectLow Voltage Battery DisconnectVariety of DC distributions Up to 40 Flatpack rectifi er modules Systems accepts large variations in the input voltage and draws sinusoidal current with a soft start power-upWeb access/SNMP

FLATPACK SYSTEMS

Flatpack Power Tower

Flatpack PRSB 21kW

Flatpack MPSU 6000 with 1U distribution

Flatpack MPSU 12kW with 3U distribution

Flatpack Wallbox 3000

Flatpack PRSB 9000

20

DC POWERSYSTEMS

FLATPACK UL SYSTEMS

Flatpack DCD200 system

The UL designed systems of the Flatpack product line offer a very wide range of system solution capabilities. The high power density and versatility of the Flatpack rectifi er makes it an ideal building block for these confi gurations.

Systems can vary between the compact Flatpack DCD125 and fully loaded 1200A power plant and can be used in any mobile or fi xed application from 6kW to up to 60kW. Let the Flatpack product line help you implement commonality and diversity in applications throughout your network. The same rectifi ers and distribution devices can be plugged into small POP and repeater sites as well as cell site and small Central Offi ce type demands.

KEY FEATURESFlatpack DCD125Includes all the key components of a DC power system, apart frombatteries. The system includes plug-in battery input protection, 12 GMT fuse distribution positions, optional LVLD and LVBD functions, plug-in main distribution output, and all the power of the Flatpack MCU controller.Flatpack DCD200 Solves application requirements where rear access is not possible. Everything to install, commission, and operate the system is accessible from the front. This system also provides plug-in battery input protection, multiple plug-in distribution positions, optional LVLD and LVBD functions, and all the power of the Flatpack MCU controller.Flatpack 400A System steps into a diverse yet power packed format. Confi gurations typically include 24 plug-in distribution positions, optional LVLD and LVBD functions, and all the power of the Flatpack MCU controller. This system can be scaled back to just a few rectifi er positions while still supporting two-hole lugs, and up to 24 distributions.Flatpack 600, 800, and 1200A These systems can be confi gured to the specifi c application required.

Flatpack DCD125 system

Flatpack 400A system

21

DC POWERSYSTEMS

Eltek’s new range of large three-phase systems is based on the state-of-the-art Powerpack 48VDC/220A three-phase rectifi er module. The rectifi er operates without any neutral conductor connected, and has unity power factor over a wide load range. CAN-bus communication and a modular control system approach increases reliability and drastically simpli-fi es system expansion. Typical applications for these systems are large Central Offi ce power plants, with system rating between 2000A and 10 000A.

In bulk power systems, separate rectifi er cabinets, distribution cabinets and batteries are all connected to a large overhead 48VDC busbar rated for the full system current capacity. Distributed systems are made by paralleling several “self-contained” cabinets, each containing rectifi ers, control unit and load/battery distribution. Current rating per cabinet is typically in the 1200-2000A range. This approach allows for signifi cant cost savings on the 48VDC bus, and in many cases it reduces the initial investment on a system that is intended to grow in size over time.

Powerpack systems can be utilized at large Central Offi ce 48VDC power plants from 2000A to 10 000A. 2000A cabinet with controller can be used as a direct partial replacement for old ferroresonant rectifi ers in existing sites.

The rectifi er is available in three models, each optimized for different input voltages: 208/240 VAC, 380/400VAC and 480VAC. The control system is based on the Smartpack, with different confi gurations and add-on units based on the actual system solution and customer functionality requirements. Cabinets are available with rectifi ers only (bulk power) or with a primary distribution included, both with 2000A capacity.

KEY FEATURESState-of-the-art technologyHigh effi ciency and advanced functionality with state-of-the-art rectifi er technology and digital control.Advanced communicationStandardized Eltek user interface and functionality by using the Smartpack controller. Distributed solutions with one Smartpack in each cabinet, communicating on the internal CAN-bus, thereby signifi cantly reducing the need for signal wiring between cabinets.Remote monitoringWeb/SNMP for remote monitoring.

POWERPACK SYSTEMS

Powerpack 4000A system

Powerpack 2000A system

RECTIFIERS AND CONVERTERS

This section outlines the switchmode power modules offered by Eltek. The rectifi er will always be the core component, the “heart” of a DC power system. Eltek therefore devotes much of its R&D efforts to the development of new state-of-the-art designs, which have the quality and the functionality expected in modern telecommunication networks. Eltek offers single-phase rectifi er modules with output power from 700W to 2500W and three-phase rectifi er modules at 11kW per module. All are hot plug-in units intended for para llel operation in a DC power system. Normally they serve as a combination of power supply and battery charger, but they can also be utilized in applications where batteries are not present, supplying high quality DC power. As a truly global company we seek to fulfi ll the most stringent requirements throughout the world especially with regard to the input voltage range. Most rectifi ers have active power factor correction making the mains distortion minimal.

Switchmode technology with soft switching and high switching frequency is used to minimize volume and weight and to obtain fast output voltage regulation. The modules accepts large variations in the input voltage and draws sinusoidal current with a soft start power-up.

22

23

The Flatpack2 is a rectifi er for stand-alone use or for working in parallel as part of a DC power system controlled and monitored by the Smartpack. With a cost-effi cient design in both the module and the power system, Flatpack2 becomes the ideal building block of a wide range of system solutions. Digital communication over a high-speed CAN bus enhances both functionality and fl exibility. Coupled with the Smartpack monitoring and control module, the Flatpack2 rectifi er can help make your network stand out in your market.

Cost-effi cient design in both module and system, makes the Flatpack2 a viable choice in most applications. With system loads from 2kW to more than 100kW, Flatpack2 can cover the entire power requirements in complete networks thus simplifying logistics and maintenance.

KEY FEATURESHighest effi ciency in minimum spaceIndustry-leading power effi ciency is achieved using resonant topology, which contributes to the rectifi er’s ultra compact design.Digitally controlledDigital primary and secondary control processes provide excellent rectifi er monitoring and regulation characteristics.Heat managementFront-to-back airfl ow with chassis-integrated heat sinks allows the rectifi er to work effi ciently in most working environments.Input protectionVaristors for transient protection, mains fuse in both lines and disconnection from the mains above specifi ed input voltage. Output protectionOvervoltage shutdown, blocking diode, short circuit proof, high temperature protection.

FLATPACK2

Key characteristics

Available models

Flatpack2 2000 24VDC

Flatpack2 2000 48VDC

Input

Operating voltage 85-290 VAC 85-300VAC

Max. current 13.4Arms 12.5Arms

Power factor 0.99 at 50% or more 0.99 at 50% or more

Output

Voltage 26.7VDC 53.5VDC

Power 2kW 2kW

Max. current 84A 41.7A

Hold up time >20ms >20ms

Effi ciency 89% 92%

Flatpack2 rectifi er

24


The Flatpack 700, 1500 and 1800 are rectifi ers for stand-alone use or parallel operation in a power rack system. This product family has proven record with more than 500 000 units installed.

With a wide range of products, this Flatpack family completes our range in the mid-power segment. Switchmode technology with soft switching and high switching frequency is used to minimize volume and weight and to obtain fast output voltage regulation. The module accepts large variations of the input voltage and draws sinusoidal current with a soft start power-up.

The Flatpack is suitable for any mobile or fi xed application with loads from 1.5kW to 60kW.

KEY FEATURESProven technologyMore than 500 000 Flatpack 1500 family rectifi ers have been delivered around world. Flatpack 1500 track record proves its high standard.Compact designThe Flatpack 1500 family fi ts into 0.3m deep cabinets. Cost-effi ciencyWith an already cost-effi cient design at introduction, efforts have constantly been put to reduce cost and maintain a competitive edge. Input protectionSoft start, surge protection (varistors), internal fuses (L&N), automatic disconnect above 310VAC.Output protectionOvervoltage shutdown, blocking diode, short circuit proof, high temperature protection.

FLATPACK 1500 FAMILY

Key characteristics Available models

Flatpack 700 48VDC Flatpack 1500 24VDC Flatpack 1500 48VDC Flatpack 1500 60VDC Flatpack 1800 48VDC

Input

Operating voltage 85-300VAC 85-300VAC 85-300VAC 85-300VAC 85-300VAC

Max. current 7.5Arms at 110VAC and 3.6Arms max. at 230VAC

8.5Arms at 185VAC and 1350W output




Power factor >0.99 at 50% or more >0.99 at 50% or more >0.99 at 50% or more >0.99 at 50% or more >0.99 at 50% or more

Output

Voltage 48VDC 26.8VDC 48VDC 60VDC 48VDC

Power 700W 1350W 1500W 1500W 1800W

Max. current 15A 50A 31.25A 25A 37.5A

Hold up time 20ms 20ms 20ms 20ms 20ms

Effi ciency >90% >88% >90% >91.5% >90%

Flatpack 1500rectifi er

25


FLATPACK 2500/SLIMPACK

The Flatpack 2500 is a battery charger and rectifi er for stand-alone use, or for working in parallel as part of a power rack system. The Flatpack 2500 is the perfect choice for telecom network applications having a high power density.

Extensive research has resulted in an improved effi ciency of 91.5% for the Flatpack 2500 making it the front-runner for wide input voltage range rectifi ers.

The Flatpack 2500 can be used in any mobile or fi xed application from 2.5kW to 50kW or more.

KEY FEATURESCost-effi cient designAbility to accept a wide input voltage range whilst working in tough ambient conditions2500W output power at 230VAC nominal input voltage Total power of 5kW per 1U height in 19" wide cabinets

The Slimpack is a battery charger/rectifi er for stand-alone use based on Flatpack 1500. It is a “small stand-alone DC power system”, a switchmode power supply designed for battery charging and supplying high quality DC power to telecom equipment and similar applications.

The internal controller card contains a mains sense circuit, battery contactor, reverse battery polarity protection and battery current limit circuit and alarm outputs. Modern, yet well-proven technology makes the Slimpack a compact and reliable power supply. In addition, a wide range of features are integrated.

The rectifi er is used for all DC power requirements where a N+1 solution is not required, e.g. powering equipment such as DSL.

KEY FEATURESComplete stand-alone power system1500W output powerLVBD and alarms

Slimpackrectifi er

Flatpack 2500rectifi er

26


The Flatpack DC/DC converters are modular hot plug-in DC/DC con verters prepared for stand-alone use, or for working in parallel as part of a DC/DC rack system.

The converter is specially designed to provide a high quality and highly reliable DC output voltage. Switchmode technology with soft switching and high switching frequency is used to minimize volume and weight, and to obtain fast output voltage regulation. The module has a soft start power-up. When working in parallel, the converters provide active current sharing. An internal blocking diode allows hot plug-in and isolates any faults in the converter output from the DC-bus.

Flatpack DC/DC converters’ application enables dual or multi DC voltage systems with a single battery bank. They may also be integrated into other Eltek DC power systems. In addition, Eltek converters can be used in any mobile or fi xed application or sites with various equipment powered from a single building bank and in Remote Power.

KEY FEATURESInternal protectionSeveral internal protection circuits ensure safe operation, even outside specifi ed limits for normal operation.Failure alarmA module failure alarm is given if the module shuts down due to high/low input voltage, high output voltage (selective), or in case of an internal failure.Active load sharingConverters connected in parallel will actively load share, even without a Monitoring and Control Unit.Module monitoringFront LCDs show power on/off and alarm status in addition to a LED bargraph for output current indication.Input protectionSoft start, internal fuses (L&N), undervolta ge lock out.Output ProtectionOvervoltage shutdown, blocking diode, short circuit proof, high temperature protection.

FLATPACK DC/DC CONVERTER FAMILY

Key characteristics

Available models

Flatpack DC/DC 24/48



Input

Operating voltage 19.8-32VDC 40–60VDC 40–60VDC

Max. current 73A at 19.8VDC input

32A at 40VDC input

34.7A at 40VDC input

Output

Voltage 43-59VDC 24-28VDC 190VDC

Power 1250W 1100W at 27.5VDC 1250W

Max. current 23A 40A 6.6A

Effi ciency 90% 90% > 90%

Flatpack DC/DCconverter

27


The Powerpack is a battery charger and rectifi er for working in parallel as part of a DC power system controlled and monitored by the Smartpack.

The Powerpack rectifi er is designed with patent-pending soft switching solutions, enabling 93% effi ciency. With state-of-the-art digital control solutions it also provides a wide range of functionality and protection features, while at the same time whilst maintaining what has always had a strong focus at Eltek: competitive cost.

Powerpack is optimized for medium and large system sizes. Digital communication over CAN-bus with Smartpack simplifi es system design and improves fl exibility. Bay confi guration of Powerpack systems is possible by adding up to 10 modules in a 23" cabinet.

World communication demands state-of-the-art, cost-effi cient and compact DC power systems. Powerpack has a space saving power density of 650W/liter.

Increasing network speed demand fl exible and expandable DC power systems. Powerpack is your key building block for future needs.

KEY FEATURESHigh effi ciencyRectifi er technology utilizes soft switching and three level boost converter that makes the module effi ciency industry-leading and contributes to the rectifi er's compact size.Local module monitoringDisplay and push buttons gives easy local monitoring of individual rectifi er as an addition to the Smartpack monitoring.Heat managementFront-to-back air fl ow with chassis-integrated heat-sinks and chimney gives the module the best reliable working environment.Plug-and-PlayA real plug-and-play connection system: installation time and cost reducing solution. User friendly handles lock module into the shelf.Input protectionVaristors for transient protection, mains fuse in all lines.Output protectionOvervoltage shutdown (level adjustable), overload and short circuit proof, high temperature protection.

POWERPACK

Key characteristics

Available models

Powerpack 480VAC

Powerpack 208/240VAC

Powerpack 380/400VAC

Input

Operating voltage

Three-phase nominal 430-530VAC



Max. current

16.5Arms maximum at nominal input and full load

38Arms maximum at nominal input and full load

20Arms maximum at nominal input and full load

Power factor>0.99 at 50% load or more at 480VAC

>0.99 at 50% load or more at 208VAC

>0.99 at 50% load or more at 400VAC

Output

Voltage53.5VDC (ad-justable range: 40-58.5VDC)

53.5VDC (ad-justable range: 40-58.5VDC)

53.5VDC (ad-justable range: 40-58.5VDC)

Power 11kW at nominal input

11kW at nominal input

11kW at nominal input

Max. current230A at 48VDC and nominal input

230A at 48VDC and nominal input

230A at 48VDC and nominal input

Hold up time

>20ms; output voltage >44VDC at full load



Effi ciency Typical 92% Typical 93% Typical 92%

Powerpack rectifi er

28

SYSTEM MONITORS

Eltek is committed to achieving and maintaining technological excellence of not only our DC power products, but also our Monitoring and Control solutions. We are able to offer monitoring products that are easily integrated into an existing telecommunications network infrastructure using proven, stable and secure technologies and globally accepted communications protocols. These products provide real-time feedback of critical system parameters and alarm events. This data can be applied toward statistical analysis of preventive maintenance schedules. Increased DC power system reliability is a direct result of this enhanced intelligence. Remote monitoring provides the industry with reduced Total Cost of Ownership for DC power systems, primarily by reducing the need for technicians to travel to remotely located sites. This reduced TCO can easily offset the initial investment in remote monitoring equipment by directly reducing operating and maintenance costs associated with technical support vehicles and staff. Additional savings are realized by reduced system downtime. From low cost embedded digital system monitors to advanced web enabled remote monitors, Eltek provides the monitoring and control solutions for today’s telecommunications DC power needs.

28

29

OPTIONSEthernet Supports a TCP/IP network connection.Supports Web/HTML interface, remote logon by PowerSuite, SNMP protocol (Get, Set, Traps) and e-mail alert via your network e-mail server.RS-232Enables remote monitoring via stand-alone Eltek WebPower unit or remote access via modem. Front or rear mounting option possible.Distributed SmartpackConnect up to eight Smartpack modules in series to extend the key feature list of your monitoring and control system.

Smartpack is a strong but versatile monitoring and control unit used in all Flatpack2 and Powerpack power solutions. This small modular unit allows for local monitoring and control via a three-button touch pad, LCD display or PC connected via USB.

Remote monitoring is possible via the optional RS-232 or Ethernet interfaces, whilst functionality can be expanded with distributed Smartpacks connected together.

KEY FEATURESFront panel LCD and buttons for on-site service without PCUSB or RS-232 interface for PC connection locally or remote monitoring and control via modem, Ethernet, Web or SNMPSix user programmable relay outputs for traditional remote monitoringSix user programmable inputs for monitoring of other equipment on siteBattery monitoring and testing without site attendanceTemperature compensated charging for increased battery lifetime Battery lifetime indicationPassword protected operator access levelsAlarm/event log with time and dateWindows-based PC communication software

SMARTPACK

Smartpack

Smartpack with RS-232 option

30

SMARTPACK WEB/SNMPSave time and money by improving the reaction time of your network monitoring and maintenance personnel.

With the Web/SNMP option, you can connect your network directly to Smartpack, giving you the power to monitor and control all your power systems remotely.

Receive real-time alarm and monitoring messages directly to your Network Management System (NMS). Then, use Web interface or PowerSuite software to diagnose the problem and thus ensure you will send the right person with the right equipment fi rst time.

SYSTEM MONITORS

SMARTPACK/SMARTNODE/FLATPACK MCU

FLATPACK MCUThe Flatpack MCU is the Monitoring and Control Unit used in Eltek Flatpack 700, 1500, 1800 or 2500 power systems.

The unit allows both local and remote monitoring and control of the DC power system via front keypads and LCD or an RS-232 serial interface either via serial cable, modems or SNMP agent.

Flatpack MCU

SMARTNODENot everyone speaks the same language; this is also true for networks. Smartnode with customized software can create protocols to suit any customer network.

With a correctly confi gured Smartnode connected to Smartpack, communication barriers become a thing of the past.

Smartnode can be used while communicating to the system from third party equipment with specifi c RS-232 serial protocol or from the system on customer specifi c RS-485 serial protocol.

Smartpack Web/SNMP rear view

Smartnode

31

WEBPOWER The Eltek WebPower, Web and SNMP adapter, is the perfect interface between the Eltek DC power system and your network.

WebPower includes the highly reliable SNMP Get, Set and Traps for alarm messages combined with easy access over HTML (using any Web-browser). E-mail functionality is also included making the Eltek WebPower suitable for most Network Management Systems (NMS).

It can be utilized in remote or limited access telecommunications sites; locations requiring connectivity to a centralized SNMP NMS and mission-critical power systems requiring real time data access from diverse locations.

SYSTEM MONITORS

WEBPOWER/POWERSUITE/WINPOWER

WINPOWERThe Windows-based program provides full access and control of any Flatpack 700, 1500, 1800 or 2500 system.

WinPower Silver connects to your Flatpack MCU via the serial port and provides easy access to all information such as system voltage levels and battery monitoring.

Password protection prevents accidental changes and since version 5.0, you can create Flatpack MCU confi guration fi le that can be transferred to other Flatpack MCU controllers.

WinPower

POWERSUITEFully featured software program PowerSuite allows you to confi gure and monitor your Eltek Flatpack2 or Powerpack system. Once connected to Smartpack, this Windows-based program is as easy to use as Windows Explorer®.

Password protection prevents accidental changes whilst the multi-layered windows allow you to navigate quickly and easily within the different areas of your system. With PowerSuite, you can even create your own specifi c Smartpack confi guration fi les that can be downloaded or distributed to any Smartpack in your network.

PowerSuite

WebPower

32

REMOTE POWER

Remote Power is a concept for distributing DC power from a Central Offi ce over existing twisted pairs to remote cabinet locations. The concept is perfect for use in broadband applications with new “high-bandwidth services.” Using the existing copper in the ground between the Central Offi ce plant and remote site, power can be delivered to the xDSL equipment (DSLAM), which is usually located closer to the end user.

Remote Power reduces the cost of both installation and operation, and increases the speed of xDSL roll-out. With Remote Power equipment installed, you become independent of local utility suppliers and make use of existing centralized backup systems and spare wiring in your copper network. There is no need to implement local AC feed with local rectifi ers and local backup batteries in remote cabinets.

Operating cost is kept to a minimum, with no extra bills from local utility providers and battery maintenance only at Central Offi ce.

32

33

REMOTE POWER

Multiple pairs to increase power transfer length in case of high line impedance

DC / DC CONVERTER VA LIMITER

Common alarmand relay output

REMOTE END CONVERTER

190-380VDC/48VDCDC/DC CONVERTERS

CENTRAL OFFICE REMOTE SITE

- 48V

+ 190V

VA limiterchannels

- 48V

- 190V

Converter alarm

Power limitation and earth leakage detection

In the Central Offi ce plant power is taken from the main -48VDC system and fed to DC/DC converters. These convert the vol tage to ±190VDC. Effectively 380VDC but never more than ±190VDC referred to ground for safety reasons.

From the DC/DC converters the power is fed to VA limiters. The VA limiters ensure safe operation through limiting the power over each channel (output) and monitoring for overload or earth faults. At the remote end located up to 10 kilometers from the Central Offi ce the voltage is converted back to -48VDC for the DSLAM or other active components.

34

REMOTE POWER

REMOTE POWER

FLATPACK RPS INTEGRATED SYSTEMSThe Flatpack Remote Power system is designed for remote powering of telecom equipment over twisted pairs (RFT).

The Remote Power system consists of up to six Flatpack DC/DC converters and up to six Flatpack VA limiters providing 24 or 72 output channels. The Flatpack RPS Integrated system can be used alone or as a building block in larger RPS systems.

KEY FEATURESOutput channelsEach channel is provided with a “Power OK”- LED in the front in addition to a common “Alarm”- LED and a potential free contact.Front connectionThe system provides front connection for cabling to actual cross-connect, and is available for ±190VDC system voltage.Output powerThe output power is limited to maximum 100VA per channel.Balanced voltagesThe system utilizes balanced voltages (±190VDC) to improve power transfer length.

FLATPACK VA LIMITERThe Flatpack VA limiter unit is designed to provide safety for personnel and to protect the Remote Feeding Telecommunication circuits from overvoltage, over-current and leakage current to ground.

KEY FEATURES12 channels (1200W total power)Alarm relayIndividual channel alarm indicationInternal protection

Flatpack RPS Integrated system

Flatpack VA limiter

35

REMOTE POWER

REMOTE POWER

REMOTE END CONVERTERThis unit is a DC/DC converter designed to be used in the remote end of a Remote Power system. A Remote Power system can be used to power telecom equipment over existing twisted copper pairs, typically DSLAMs or other remote equipment.

The unit consists of 5 galvanically isolated converters with gas tube surge protection and input current limitation to prevent overloading of the VA limiter. Each channel is equipped with a blocking diode (Or-ing diode) for redundancy and selective overvoltage protection. The input is reverse polarity protected with a diode bridge rectifi er. The channels share the load automatically. The converter features current limiting on the input, i.e. the converter will never overload the Central Offi ce supply (VA limiter). This also means the output power is derated linearly with the input voltage giving a maximum of 380W output power for maximum input voltage (400VDC), and 250W at typical input voltage (250VDC) considering the voltage drop in the feed lines (twisted pairs).

KEY FEATURESFlexible mounting5 Channels inputModule alarm output (dry contact)48VDC outputBuilt-in primary surge protection

FLATPACK RPS CABINETIZED SYSTEMSAll building blocks in Eltek Remote Power are modular and systems of various sizes can be realized. From the Integrated RPS to large Central Offi ce plants.

The systems are designed to meet the requirements of the European and North American electrical safety standards, IEC 60950-1, UL 60950-21 and Telcordia GR-1089-CORE, respectively.

Remote End Converter

Flatpack RPS Cabinetized system

36

OUTDOORSOLUTIONS

A growing number of telecom installations are placed in outdoor cabinets. Eltek has developed its own series of outdoor cabinets to meet this requirement. We have also developed a lot of specifi c outdoor enclosures for applications such as DSLAM equipment, fi ber/coax splitters, connection and distribution; all with integrated power.

In cooperation with our customers we seek to fi nd the optimal solution based on environmental parameters and cost. Eltek has customers in tropical and dry areas, hot and cold areas, clean and polluted areas – all factors that impact the ideal choice of outdoor cabinet solution. To meet this variation our local offi ces, together with corporate expertise, have developed many locally adapted solutions.

36

37

Outdoor cabinets for site support of mobile or fi xed network elements are designed for different climate conditions, being equipped with custom designed heaters and thermal management suitable for specifi ed environmental conditions and humidity.

We have the expertise to fi nd the optimal total solution based on environmental parameters and specifi cations of protected equipment.

Outdoor cabinets are suitable for 19" mounting of Flatpack DC power systems up to 12kW and Flatpack2 power systems up to 24kW, as well as provide space for microwave radio units and batteries. Detailed design of size and cable management are tailored to customer needs.

KEY FEATURES:1.3 or 2m high0.8m (pole or wall cabinet)DC power up to 24kWFlexible distributionCooling optionsFan/fi lerHeat exchangersAir condition

OPTIONSDoor alarms LightHeatersAC distributionLightning and surge protectionsTop or bottom cablingDifferent cable glandsSpace for customer equipmentCable management solutionsTop cable ductService socket

STANDARD SOLUTIONS

Outdoor solution 2m

Outdoor solution 0.8m

38

REGIONAL SOLUTIONS - ASIA PACIFIC

Different locations, Different conditions, Different solutions.As conditions of the high North differ from tropical conditions in Asia or deserts in the Middle East, Africa or Americas our outdoor solutions need to be adapted to local conditions.

Our regional offi ces, together with corporate expertise on outdoor enclosures have developed various locally adapted solutions. As always for Eltek, cost and system power density are in focus. With extremely compact rectifi er modules, we can also open doors for a higher degree of integration as space is made available in the cabinets.

Eltek outdoor solutions can be used in various applications, e.g. site support cabinets, road side cabinets, fi ber/coax infrastructure, battery housing, pure power cabinets, etc.

OUTDOORSOLUTIONS

Outdoor solution Singapore

Outdoor solution China

39

There are numerous outdoor solutions designed for the Americas market. These include battery enclosure, low profi le plastic housing, metal and plastic pedestals, utility and keg enclosures.

These outdoor solutions provide easy access to the connection, splicing and distribution devices, electronics or battery. Some of them (as battery enclosure and utility enclosures) are equipped with vents which permit airfl ow. Keg enclosure is furnished with a 1000W integral heater that keep the sensitive electronics functioning in the most extreme conditions. In addition powder coated metal on the majority of the outdoor cabinets allows for corrosion resistance and durability.

Typical applications for these solutions are fi ber optic splice, con-nection and distribution copper splice, connection and distribution coax tap, coupler, splitter and line extender and DSLAM housing.

REGIONAL SOLUTIONS - AMERICAS

OUTDOORSOLUTIONS

Utility enclosure Plastic pedestal

Battery enclosure

Keg enclosure

40

GLOBAL SERVICE OFFERSite survey, Planning and Project ManagementEltek provides turn-key services starting from site survey and planning. Our team evaluates the technical characteristics, overall dimensions and the require-ments applicable to the power plants for the integration of telecommunication equipment. Eltek project coordinators provide project management services that include procurement, material tracking, budget analysis, scheduling and project tracking.

Installation and CommissioningThe installation and full test of the equipment on site after delivery is vital to assure future trouble-free operation. Eltek engineers and our specialist partners are the most qualifi ed people to perform these types of services.

Preventive MaintenanceA regular check on your equipment often prevents expensive repairs by identifying any fault or weakness as early as possible. A full report follows each visit. This gives you an update on the condition of your equipment and helps you plan upgrading, expansion or renewal. Our standard preventive maintenance service includes full test, visual check, real and simulated alarm checks, alarm history check and a full report with recommendations.

Battery maintenanceIn addition to system maintenance, Eltek is able to perform battery mainte-nance. This includes supplying all of the measuring tools and load equipment necessary to operate a controlled discharge of the battery bank and test each individual cell. All measurements are recorded and listed in a report presented at the end of the operation.

24 hours emergency serviceFor total peace of mind, our 24 hour emergency service provides you with the as-sistance of an experienced engineer at all times over the phone and on-site visits within pre-defi ned times according to location. It is also possible, depending on system confi guration, to establish a modem or Ethernet connection between the power systems on site and Eltek, ensuring direct access to control the system from a remote location.

On site serviceOn site service is available both as part of a service contract and on an “ad hoc” basis.

Product repairsAll product repairs are based on fi xed prices and are guaranteed for one year.

TrainingA comprehensive range of training courses is available and can be customized to meet specifi c customer needs.

OUR DEDICATED TEAM OF ENGINEERS AND OFFICIALLY CERTIFIED PARTNERS CAN PERFORM A WIDE RANGE OF SERVICES ON OUR PRODUCTS: 24 HOURS A DAY, 7 DAYS A WEEK.

24/7

SERVICES AND OTHER INFORMATION

41

CERTIFICATIONS MATRIX

Modules CE UL

EMC Harmonics Environment

ETSI EN 300386 v.1.3.2 EN 61000-6-3 EN 61000-6-2

NEBS Telcordia GR-1089-CORE EN 61000-3-2

ETSI EN 300019-2

ETSI EN 300132-2300132-2300132-2

NEBS Telcordia GR-63-CORE Zone 4

Flatpack2 48V x x x x x x x x x x

Flatpack2 24V x x x x x x x x x x

Flatpack 1500 48V x x x x x x x x x x

Flatpack 1500 24V x x x x x x x x x x

Flatpack 1500 60V x - x x x - x x x -

Flatpack 700 x x x x x - x x x -

Flatpack 1800 x x x x x - x x x -

Flatpack 2500 x - x x x - x x x -

Slimpack x - x x x - x x x -

Powerpack x x x x x x x x x x

Flatpack DC/DC 24/48 x x x x x x N/A x x x

Flatpack DC/DC 48/24 x x x x x - N/A x x x

Flatpack DC/DC 48/190 x x x x x x N/A x x x

Smartpack x x x x x x N/A x x x

Flatpack MCU x x x x x x N/A x x x

VA limiter x x x x x x N/A x x x

Remote End Converter x x x x x x N/A x x x

x - applicable

N/A - not applicable

ELTEK HAS TAKEN MAJOR STEPS TO CONVERT ITS PRODUCT PORTFOLIO TO COMPLY WITH EU RoHS DIRECTIVE, WHERE THIS IS REQUIRED. FROM 01.06.2006 ALL THESE PRODUCTS WILL BE ACCORDING TO THE EU RoHS DIRECTIVE AS DEFINED FOR THE TELECOM INDUSTRY.

42

ABBREVIATIONS

A Ampere“A” alarm contacts Potential free contactsAC Alternating CurrentAh Ampere-hoursArms Ampere root mean squareCAN-bus Controller Area Network, a multicast shared serial bus standardCE European mark of conformityCO Central Offi ceDC Direct currentDCD DC DistributionDSL Digital Subscriber LineDSLAM Digital Subscriber Line Access MultiplexerEMC Electromagnetic CompatibilityEN European NormETSI European Telecommunications Standards InstituteHTML Hyper-Text Markup LanguageIEC International Electrotechical CommissionIP Internet ProtocolL&N Line and Neutral LCD Liquid Crystal DisplayLED Light Emission DiodeLVBD Low Voltage Battery DisconnectLVD Low Voltage DisconnectLVLD Low Voltage Load DisconnectMCB Miniature Circuit BreakerMCU Monitoring and Control UnitMPSU Modular Power Supply Unit

ms MillisecondNEBS Network Equipment-Building SystemsNMS Network Management SystemPC Personal ComputerPOP Point-of-presence PR Power RackPRS Power Rack SystemPRSB Power Rack System with BatteryR&D Research and DevelopmentRBS Radio Base StationRFT Remote Feeding Telecommunication RJ45 Connection format standardRNC Radio Network ControllerRPS Remote Power SystemRS-232 Serial communication busRS-485 Serial communication busSMS Short Message ServiceSNMP Simple Network Management ProtocolTCO Total Cost of OwnershipTCP/IP Transmission Control Protocol/ Internet ProtocolU Height unit (44.45mm (1.75"))UL Underwriters Laboratories IncorporatedUSB Universal Serial BusVA Volt-ampereVAC Volts of alternating currentVDC Volts of direct currentW Watt

Eltek Energy (UK) LtdEltek House, Maxted RoadHemel HempsteadHertfordshire HP2 7DXUnited KingdomTel: +44 1442 219355 Fax: +441442 245894

Eltek Energy ASGråterudveien 8 3036 DrammenNorwayTel: +47 3220 3200 Fax: +47 3220 3210

Eltek Energy Slovakia s.r.oPalenica 53/79033 17 Liptovsky HradokSlovakiaTel: +421 4452 01607Fax: +421 4452 01660

OOO Eltek St. Petersburg2nd Sovyetskaya House 7Offi ce 108193036 St. PetersburgRussiaTel: +7 812 3321 117Fax: + 7 812 3321 116

Eltek – SFEE SA.Z.I. de Bastillac-Nord65000 TarbesFranceTel: +33 5623 40930 Fax: +33 5623 45869

Voigt & Haeffner GmbHFerdinand-Porsche-Str. 4560386 Frankfurt a. M.GermanyTel: +49 69 42002-0Fax: +49 69 42002-389

Eltek Energy OyKuminatie 16 A01300 VantaaFinlandTel: +358 20 7798 820Fax: +358 20 7798 829

Eltek Energia S.A.c/o Insyte Instalaciones, S.A.C/Huesca, 23 PO. Ind. Valdonaire28970 Humanes (Madrid)Spain Tel: +34 9149 20660Fax: +34 9160 00307

Eltek Middle EastP.O. Box 18119LOB 14, Offi ce 132Jebel Ali Free ZoneDubaiUAETel: +971 4887 1176Fax: +971 4887 1175

Eltek Polska Sp. Z o.o.ul. Gorlicka 2, 71-042 Szczecin PolandTel: +48 9148 52440 Fax: +48 9148 34986

Eltek Energy ABHammarbacken 4 A191 24 SollentunaSwedenTel: +46 862 66420Fax: +46 862 66430

Eltek Energy Pte LtdNo 3 Teban Gardens CrescentSingapore 608920SingaporeTel: +656 77 32326 Fax: +656 77 53602

Eltek Energy Incorporated0302 3rd Floor Orient Square Building,Emerald Avenue, Ortigas Pasig City ManilaPhilippinesTel: +632 910 6355Fax: +632 9106358

Eltek Energy (M) Sdn BhdNo 19, 19-1 to 3Plaza Danau 2Jalan 109F, Taman Danau Desa58100 Kuala LumpurMalaysia Tel: +603 798 15866/74552Fax: +603 798 77352/70513

Eltek Energy Incorp 2005 (Thailand) Ltd15/58 Moo 7, Petchkasem RdNongkhangploo, Nongkham10160 BangkokThailandTel: +662 9436905Fax: +662 9436647

Eltek SGS Pvt Ltd362, Sector-37, Pace City – IIGurgaon – 122 001(Haryana) IndiaTel: +91 124 221 0018Fax: +91 124 221 0017

Eltek Energy AS Pakistanc/o Nextera Communications (Pvt.) Ltd. 5, Street 32, F-8/1IslamabadPakistanTel: +92 5128 53149Fax: +92 5128 53150

Eltek Energy Pte Ltd.Flat F, House 13, Road 34Gulshan, Dhaka-1212BangladeshTel: +88 02 8814 220Fax: +88 02 8832 268

Eltek Pacifi c Pty LtdUnit 1, 22 Narabang WayNSW 2085 BelroseAustraliaTel: +61 2947 94200 Fax: +61 2947 94290

Eltek Energy Technology (Dongguan)Ltd.Guancheng S&T Park, Shilong Rd. Guanlong Rd.’s Section523119 DongguanChinaTel: +86 769 226 51108Fax: +86 769 222 96797

Eltek Energy LtdRm. 812, Eight Commercial Tower8 Sun Yip Street, Chai WanHong KongTel: +85 228 982 689Fax: +85 228 983 189

Eltek Energy LLC115 Erick StreetCrystal Lake, IL 60014-4533USATel: +18 154 599 100 Fax: +18 154 599 118

Eltek Energy de Peru SRLAv. 2 de Mayo 585 San IsidroLima 27PeruTel: +51 142 192 71

Eltek Sistemas de Energia Industria e Comércio S/AAvenida Guinle, 3379Cumbica - GuarulhoCEP 072221-070 Sao PauloBrazilTel: +55 116 487 56 56Fax: +55 116 155 39 05

Eltek Energy LLCCra 28 No 89-63 Of. 101Bogota D.C.ColombiaTel: +57 1622 1691Fax: +57 1635 7445

Eltek Energy International de Mexico S. de R.L. de C.V.Av. Gustavo Baz No. 401Col. Hacienda del CristoNeucalpan de Juarez Edo.C.P 53138MexicoTel: +55 11 64875656

EMEA

ASIA/PACIFIC

AMERICAS

A global leader in telecom powerEltek is committed to providing leading edge telecompower products and services at the best prices, on time,all over the world.

Eltek ASAPO Box 2340 Strømsø, 3003 Drammen, NorwayGråterudveien 8, 3036 Drammen, NorwayTel: +47 32 20 32 00 Fax: +47 32 20 32 10www.eltekenergy.com

Concep

t and d

esign: C

obra Ph

oto

: Ole W

alter Jacobsen

Productio

n: N

etwork

Product overview

/April 2

006

Eltek Flat Pack 2

Documents

Transcript of Eltek Flat Pack 2