Electric & Hybrid Vehicle Safety EquipmenT€¦ · • Voltage Detector 90-1000V AC • Folding...
Transcript of Electric & Hybrid Vehicle Safety EquipmenT€¦ · • Voltage Detector 90-1000V AC • Folding...
KITSSAFETY CLOTHING
SIGNAGEINSULATED TOOLS
LOCKOUTACCESSORIES
Electric & Hybrid Vehicle Safety EquipmenT
2017
DangerHigh Voltage www.totallockout.com Part Number: EHV-59793
DANGER HIGH VOLTAGE!
Note: Activating the high voltage system can only be authorised by the person who deactivated the system!
DO NOT SWITCH ON HIGH VOLTAGE!
PLEASE SEE OPPOSITE SIDEFOR CONTACT DETAILS
www.totallockout.com Part Number: EHV-59794
BMW Danger Sign.indd 1 01/06/2016 14:21:50
KITS SAFETY CLOTHING
SIGNAGE INSULATED TOOLS
LOCKOUT ACCESSORIES
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
EHV Kits
Superior EHV Kit
• Insulated Screwdriver Set ( 5 piece set)• Insulated Reversible Ratchet 3/8” Sq Drive• Insulated Socket 12pt 3/8” Drive 8mm• Insulated Socket 12pt 3/8” Drive 10mm• Insulated Socket 12pt 3/8” Drive 13mm• Insulated Combination Pliers 160mm
Contents: • Cat 0 Electrical Safety Gloves• Cotton Under Gloves• Leather Over Gloves• 1kV Face Shield• Dielectric Over Boots• ‘Danger High Voltage’ Window Sign• ‘Do Not Operate’ Photo ID Lockout Tags• 1kV Rescue Hook• Port Lockout Device• Master Lock PLO-406 Insulated Padlocks• Continuity Tester
Electric and Hybrid Vehicle Safety KitsAll of these items can be purchased separately, but as always it is more cost effective to buy them as part of a safety kit. Each of our kits has been carefully assembled to provide maximum safety and performance whilst working on Electric and Hybrid Vehicles.
Contents: • Cat 0 Electrical Safety Gloves• Cotton Under Gloves • Leather Over Gloves• 1kV Face Shield• Dielectric Over Boots• ‘Danger High Voltage’ Window Sign
Basic EHV Kit
• ‘Do Not Operate’ Photo ID Lockout Tags• 1kV Rescue Hook• Port Lockout Device• Master Lock PLO-406 Insulated Padlock• Continuity Tester• Insulated Screwdriver Set( 5 piece set)
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
EHV Kits
Expert EHV Kit
Contents• Cat 0 Electrical Safety Gloves• Cotton Under Gloves• Leather Over Gloves• 1kV Face Shield• Dielectric Over Boots • ‘Danger High Voltage’ Window Sign• ‘Do Not Operate’ Photo ID Lockout Tags• 1kV Rescue Hook• Port Lockout Device• Master Lock PLO-406 Insulated Padlock• Continuity Tester• Insulated Screwdriver Set ( 5 piece set)• Screwdriver 0.6 x 2.8 x 75mm,• Screwdriver 0.8 x 4.0 x 100mm,• Screwdriver 1.0 x 5.5 x 150mm,• Screwdriver PZ Size 1 x 80mm,• Screwdriver PZ Size 2 x 100mm• 25m Plastic Chain for Cones• Chain Connectors for Cones
• Insulated Reversible Ratchet 3/8” Sq Drive• Insulated Socket 12pt 3/8” Drive 8mm• Insulated Socket 12pt 3/8” Drive 10mm• Insulated Socket 12pt 3/8” Drive 13mm• Insulated Combination Pliers 160mm• Insulated Ring wrench 8mm• Insulated Ring wrench 10mm• Insulated Ring wrench 13mm• Insulated Ring wrench 15mm• Insulated Ring wrench 17mm• Insulated Ring wrench 19mm• Insulated Reversible Ratchet 1/2” Sq Drive• Insulated Socket 6pt 1/2” Drive 13mm• Insulated Socket 6pt 1/2” Drive 15mm• Insulated Socket 6pt 1/2” Drive 17mm• Insulated Socket 6pt 1/2” Drive 19mm• Insulated Socket 6pt 1/2” Drive 21mm• Insulated Long Nose Pliers 160mm
For more information on our kits, or create a personalised kit, please contact us on:(727)-608-4325
EHV Kits
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
EHV Kits
An Electrically insulated dielectric overboots approved to current standards with a vulcanised rubber sole for superior slip resistance.Dielectric overboots provide protection of up to 20kV over the complete boot for 8 hours.Ingenious rear entry design ensures the boot is quick and easy to fit and remove.Ideal for personnel who have to continually enter and exit hazardous areas.Seamless construction.
Dielectric Overboots
Part No. Description
EHV-6040B/68 Dielectric Overboots Size 6-8 (Medium)
EHV-6040B/911 Dielectric Overboots Size 9-11 (Large)
EHV-6040B/1214 Dielectric Overboots Size 12-14 (Extra Large)
Leather over gloves worn over insulating gloves to protect against mechanical hazards and electrical arcing.300mm-330mm long (12”-13”)
Leather Over Gloves
Part No. Description
EHV-602LG/08 Leather Over Gloves Size 8
EHV-602LG/09 Leather Over Gloves Size 9
EHV-602LG/10 Leather Over Gloves Size 10
EHV-602LG/11 Leather Over Gloves Size 11
EHV-602LG/12 Leather Over Gloves Size 12
Cotton Under Gloves EHV-601CGL
To be worn underneath Electrical Safety Gloves & Leather Over-glovesPack of 10
Insulating Rubber Apron
• Manufactured from 1mm thick orange neoprene with nylon insert for added strength
• Used to protect engineers working with live voltages up to 1000V
• Approved to ENTS 43-103 specification
• In line tested to ASTM F-2320• Comes complete with adjustable
waist strap• Supplied in one size only Fixed
neck strap attached
Cat 0 Electrical Safety Gloves
Fully insulated gloves test stamped for working voltages 1000 V max, test voltage 5000V, – manufactured to EN609031mm Thick, 360mm Long
Part No. Description
EHV-6070584/08 Electrical Safety Gloves Size 8
EHV-6070584/09 Electrical Safety Gloves Size 9
EHV-6070584/10 Electrical Safety Gloves Size 10
EHV-6070584/11 Electrical Safety Gloves Size 11
Face Shield EHV-603FS
• Designed to be worn without a helmet
• Adjustable size – forehead protection
• Transparent shield manufactured from clear acetate fibre
Safety Clothing
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Safety Clothing
‘Danger High Voltage’ Car Window Sign
‘Danger High Voltage’ Sign for use inside of a vehicle as a warning.
Comes with suction cup to stick to window
100mm x 150mmPack of 5
EHV-59793
DANGER HIGH VOLTAGE!
Note: Activating the high voltage system can only be authorised by the person who deactivated the system!
DO NOT SWITCH ON HIGH VOLTAGE!
PLEASE SEE OPPOSITE SIDEFOR CONTACT DETAILS
www.totallockout.com Part Number: EHV-59794
‘Danger High Voltage’ Qualified Technician Tag
Danger High Voltage Lockout Sign130mm x 220mm
Double SidedName and Details of Qualified
Individual to be named on back of tagSold Individually
EHV-59794
Electric Shock Poster
110gsm synthetic paperHighly durable, tear, water and
grease resistant594mm X 420mm
Ensure staff and visitors are aware of first aid procedures.
EHV-58999
Comments ___________________
____________________________
____________________________
Date: _______________________
Authorisation: _________________
Maintenance inprogress do not
switch on
DangerLive wires
Comments ___________________
____________________________
____________________________
Date: _______________________
Authorisation: _________________
DangerHigh Voltage
Comments ___________________
____________________________
____________________________
Date: _______________________
Authorisation: _________________
DangerHigh Voltage
Isolate elsewherebefore opening
Comments ___________________
____________________________
____________________________
Date: _______________________
Authorisation: _________________
• Safety Tag• 80mm x 150mm• Double sided• Matt PVC• Pack of 10• Supplied with 150mm nylon cable ties
Part No. Description
SIG-5-3423 Maintenance in Progress Tag
SIG-5-5062 Danger Live Wires Tag
SIG-5-5068 Danger High Voltage Tag
SIG-5-5067 Danger High Voltage Isolate.. Tag
• Photo ID Tag• 160mm x 75mm (6-1/4” x 3”).• Self Laminating.• Chemical, abrasion, grease and solvent
resistant.• Pack of 10 tags
Part No. Description
SIG-LTT12 Danger Equipment Locked Out By..
SIG-LTT13 Danger Removed Only By...
SIG-LTT14 Danger Do Not Operate..
SIG-LTT15 Danger Do Not Attempt To Operate..
DangerHigh Voltage www.totallockout.com Part Number: EHV-59793
Signage
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
‘Do Not Operate’ Photo ID TagsSIG-S4802LEN
• Provides a visual representation of the authorised employee• Complies with OSHA lockout/tagout standard• Customise with name, department, and employee specific photo I.D.• One item consists of 1 bag with 12 tags and 12 ties
Lockout Tag – Do Not OperateSIG-497A
• OSHA compliant lockout tags, 12 per pack.• Durable polyester laminate resists water, grease and extreme temperatures.• 14.6cm x 7.9cm• Heavy duty construction withstands over 22,7 kg of pull force.• Customise with name, department, expected completion time.• 11mm dia, brass grommet accepts all safety padlocks.
Part No. Description
SIG-24011D 100 x 150mm Self Adhesive Vinyl
SIG-14011D 100 x 150mm Rigid Plastic
SIG-24011E 150 x 200mm Self Adhesive Vinyl
SIG-14011E 150 x 200mm Rigid Plastic
SIG-24012D 100 x 150mm Self Adhesive Vinyl
SIG-14012D 100 x 150mm Rigid Plastic
SIG-24012E 150 x 200mm Self Adhesive Vinyl
SIG-14012E 150 x 200mm Rigid Plastic
SIG-24012K 300 x 400mm Self Adhesive Vinyl
SIG-14012K 300 x 400mm Rigid Plastic
SIG-14013E 150 x 200mm Rigid Plastic
SIG-24013K 300 x 400mm Self Adhesive Vinyl
SIG-14013K 300 x 400mm Rigid Plastic
SIG-24013P 400 x 600mm Self Adhesive Vinyl
SIG-14013P 400 x 600mm Rigid Plastic
SIG-24019D 100 x 150mm Self Adhesive Vinyl
SIG-14019D 100 x 150mm Rigid Plastic
SIG-24011DSIG-14011DSIG-24011ESIG-14011E
SIG-24012DSIG-14012DSIG-24012ESIG-14012ESIG-24012KSIG-14012K
SIG-14013ESIG-24013KSIG-14013KSIG-24013PSIG-14013P
SIG-24019DSIG-14019D
Lockout Signs.Available in a range of sizesMaterial: Rigid Plastic & Self Adhesive Vinyl
Signage
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Insulated Tool Kit BEL-1000V1
Insulated Screwdriver Set BEL-110700
Part No. Description
EHV-6123/8RR Insulated Reversible Ratchet 3/8”
EHV-6131/2RR Insulated Reversible Ratchet 1/2”
• Insulated Screwdriver 0.6 x 2.8 x 75mm• Insulated Screwdriver 1.0 x 4.5 x 125mm• Insulated Screwdriver 1.2 x 6.5 x 150mm• Insulated Screwdriver PZ size 1 x 80mm• Insulated Screwdriver PZ size 2 x 100mm• Insulated Screwdriver PZ size 3 x 150mm• Insulated Adjustable Spanner 200mm• Insulated Cable Knife Heavy Duty Blade• Insulated Diagonal Side Cutter 160mm• Insulated Pliers Engineers 160mm• Voltage Detector 90-1000V AC• Folding Tool Case 380 x 50 x 260mm
Part No. Description
EHV-388S Insulated Socket 12pt 3/8” Sq Drv - 8mm
EHV-3810S Insulated Socket 12pt 3/8” Sq Drv - 10mm
EHV-3813S Insulated Socket 12pt 3/8” Sq Drv - 13mm
EHV-130410 Insulated Socket 6pt 1/2” Sq Drv - 10mm
EHV-130413 Insulated Socket 6pt 1/2” Sq Drv - 13mm
EHV-130415 Insulated Socket 6pt 1/2” Sq Drv - 15mm
EHV-130417 Insulated Socket 6pt 1/2” Sq Drv - 17mm
EHV-130419 Insulated Socket 6pt 1/2” Sq Drv - 19mm
EHV-130421 Insulated Socket 6pt 1/2” Sq Drv - 21mm
More Insulated Socket sizes available,please call us on 01376 325506
High torque soft grip screwdriversPrecision hardened Chrome-Vanadium-Molybdenum steel bladeBlade insulation directly moulded onto the bladeErgonomic, soft grip multi-component handleTested to EN/IEC 60900:2004
Contains:• Screwdriver 0.6 x 2.8 x 75mm• Screwdriver 0.8 x 4.0 x 100mm• Screwdriver 1.0 x 5.5 x 150mm• Screwdriver PZ Size 1 x 80mm• Screwdriver PZ Size 2 x 100mm
• Toothed grip• Blades for hard and soft wire• Inductively tempered blades• Cutting power minimum 60 HRC• Made of tempered vanadium steel• Polished chrome head• Tested to EN/IEC 60900:2004• 160mm Long
• Blades suitable for hard and soft wire• Long cutting edges for thicker cables• Inductively tempered blades• Cutting power approx. 60 HRC• Made of specially tempered tool steel• Tested to EN/IEC 60900:2004• 160mm & 180mm available
Insulated Combination Pliers
Insulated Long Nose Pliers
Part No. Description
EHV-614160CP 160mm Insulated Combination Pliers
EHV-614180CP 180mm Insulated Combination Pliers
EHV-615160LP 160mm Insulated Long Nose Pliers
EHV-614160CPEHV-614180CP
EHV-615160LP
Insulated Tools
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Insulated Tools
Insulated Ring Wrenches
• Made of chrome vanadium steel• Suitable for live work up to 1000V• Conforms to ISO 10104, DIN 838 and
UNE 16522• Larger sizes available on request• Tested to EN/IEC 60900:2004
Part No. Description
EHV-161308 Insulated Ring Wrench 8mm
EHV-161310 Insulated Ring Wrench10mm
EHV-161313 Insulated Ring Wrench13mm
EHV-161315 Insulated Ring Wrench 15mm
EHV-161317 Insulated Ring Wrench 17mm
EHV-161319 Insulated Ring Wrench 19mm
Part No. Description
EHV-151308 Insulated Open Ended Wrench 8mm
EHV-151310 Insulated Open Ended Wrench10mm
EHV-151313 Insulated Open Ended Wrench 13mm
EHV-151317 Insulated Open Ended Wrench 17mm
EHV-151319 Insulated Open Ended Wrench 19mm
EHV-151322 Insulated Open Ended Wrench 22mm
Insulated Open Ended Wrenches
• Made of chrome vanadium steel• Long length spanners available on request• Torque tested according to DIN899• Tested to EN/IEC 60900:2004
Part No. Description
EHV-632200 Insulated Adjustable Wrench 8”/200mm
EHV-632300 Insulated Adjustable Wrench 12”/300mm
Insulated Adjustable Wrenches
• Made of chrome vanadium steel• Measurement scale on jaws to size nuts and
pipes• Cross section of the knurl is tapered to give a
smoother and more precise action• Professional multi-coated insulation
Insulated Diagonal Side Cutters
• For hard and soft wires• Inductively tempered blades• Cutting power approx. 62 HRC• Polished chrome head• Tested to EN/IEC 60900:2004
Insulated Cable Cutters Round
• Specially designed for cutting and stripping conductor before cable lug is applied. After cutting, the lug is easily applied to the conductor end because the conductor retains its rounded shape.
• Suitable for cutting cables up to 35 mm² of soft, stranded copper and aluminum conductors
• Single handed operation• Specially tempered tool steel• Sharp, tempered precision cut blades• Tested to EN/IEC 60900:2004
EHV-631DSC
EHV-633CCR
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
PLO-406###Zenex Safety Padlock, Fully Non-Conductive
• 38mm x 45mm body• 38mm vertical shackle clearance• 6mm dia. Zenex shackle
Keyed to Differ: Keyed Alike: Master & Differ: Master & Keyed Alike:
Part No. Description
ELO-FCL185 Red Spot Fuse Carrier Lockout
New from Total Lockout is this innovative multi-use, safety lockout device used for locking out electrical isolation port/socket on electric and hybrid vehicles.
Features and benefits:• Universal device fits all isolation ports• Accepts any padlock up to 6.5mm dia
shackle – PADLOCK NOT INCLUDED• Can be fitted without the use of any
tools.• Device grips the side wall of the
isolation port & locked in place with safety padlock.
• Device prevents workers fingers coming in to contact with live electrical terminals.
• Made from Glass Filled AcetylThe purpose of removing is to protect the operative when carrying out certain tasks as well as protect the vehicle and vehicle ECU’s etc when carrying out certain tasks.
Port Lockout Device
Personalisation
By personalising padlocks, you can create a sense of ownership between the user, and the lockout equipment. This has been proven to increase the integrity of lockout procedures. Padlocks can be personalised in a variety of ways, through engraving, labelling and colour coding.
Colour Coding
Zenex padlocks are available in a range of colours shown below.
Engraving
Padlocks can be engraved to provide individual markings, for example:• Users name• Department• Location• Company Logo
Lockout Equipment
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Plastic Non Conductive Hasp
Safety lockout hasps are used by maintenance engineers where multiple workers must isolate machinery and equipment with their personal padlock
• Zenex Non-Conductive Hasp.• Body and jaw in plastic.• Dielectric protection.• Anti-sparking.• Ideal for electrical isolation.
Part No. Description
HAS-428 Plastic Non Conductive Hasp
Rotating Electrical Plug Lockout
• Outward/inward rotation allows for easier application & storage• Surrounds the electrical plug and protects against accidental
reconnection• Patented rotating design allows for easier installation in confined
space applications• Complete with high-visibility permanent safety labels (English,
French & Spanish)• Tough, lightweight, dielectric thermoplastic bodies withstands
chemicals• ELO-487 - Performs effectively in extreme conditions
(temperature range -50°F (-46°C) to +350°F (177°C)• For electrical plug sizes up to 2-1/4” diameter x 3-1/4” (5.7cm x
8.2cm) with cord dia. up to 3/4” (1.9cm) (Most 110 V and many 220 v plugs) ELO-488 - Performs effectively in extreme conditions (temperature range -50°F (-46°C) to +350°F (177°C)
• For electrical plug sizes up to 3” diameter x 6” (7.6cm x 15.2cm) with cord dia. up to 3/4” (1.9cm) (Most 220 and many 550-volt plugs)
Part No. Description
ELO-487 Rotating Electrical Plug Lockout - Small
ELO-488 Rotating Electrical Plug Lockout - Large
Steering Wheel Lockout
• Three sizes available for various diameter steering wheels Ø 16”, 20” & 24”
• Trilingual warning notifies employees not to start or move vehicle.
• Lock in place with a hasp and safety padlock.• Padlock in place
Part No. Description
ACC-4716 Steering Wheel Cover 16”
ACC-4720 Steering Wheel Cover 20”
ACC-4724 Steering Wheel Cover 24”
Lockout Equipment
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
EHV Kits
Safety Rescue Hook 1kV
S shaped Safety Rescue Hooks for the safe removal of electric shock victims from live low voltage power lines, and electric powered machines. The hook enables the victim to be pulled clear by gripping the arms, legs, armpits, ankles etc.
• 1kV Hook - Black HD polyethylene, with high temperature stabiliser additive, and 2% U.V. stabiliser for high U.V. protection. Excellent chemical resistance.
• 60kV Hook - Natural colour polyethylene, with high temperature stabiliser additive.
• Anticipated Life: 10 years. After this time the hook should be renewed. The year of manufacture is embossed on the hook.
• Used for retrieval of victims of electric shock
Part No. Description
EHV-605/509048 Safety Rescue Hook 1kV - 1000mm 25mm Ø
BEL-509049 Safety Rescue Hook 60kV - 1950mm 35mm Ø
EHV-509050 Safety Hook Mounting Station 1kV
BEL-509051 Safety Hook Mounting Station 60kV
EHV-509030 Safety Rescue Hook 90kV
Electrical Switchboard Rubber Matting
Dark Grey, high grade rubber based electrical switchboard matting -Available in 2 lengths, 1m & 10m• Tested to 5kV for up to 1000V maximum working• IEC 61111:2009 – Class 0• Flame Retardant/Oil & Acid Resistant
Rubber:• Upper side fine ribbed/underside fabric impression• Tensile Strength: 6Mpa – IEC61111• Hardness: 65 Shore A – IEC61111• Elongation: Not less than 400% – IEC61111• Mechanical Puncture Resistant: Not less than 70N –
IEC61111
Part No. Description
EHV-6191M Electrical Rubber Matting 1000mm x 3mm x 1m
EHV-61910M Electrical Rubber Matting 1000mm x 3mm x 10m
Shroud Rubber Insulating - EHV-6261MS
Shroud Rubber Insulating• 915 x 1 x 1000mm• Class 0 – 1000V AC Max
Working• Inline tested to 5kV as per
ASTM F-2320• Tested to ENATS 43-103• Supplied as 1 x 1 metre
length
Transparent Shrouding - EHV-6271TS
Used to protect engineers working with live voltages up to 1000VEasily installedPrevents accidental contact with live terminalsAlso available 2 types of insulated clamps to hold shrouding in position1350 x 1000mm x 0.5mm
Accessories
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Retractable Barrier and Cone Kit
Create a barrier with traffic cones instantlyEach Skipper™ unit contains a highly visible 9 metre length retractable vinyl tape which also features a self-tensioning ratchet which ensures the tape is pulled tight and held in position at all times
Kit Contents:4 x 750mm Sand Weighted Traffic Cone4 x Skipper™ Barrier Unit with Red & White Tape
EHV-617RBKPlastic Chain for Cones
Part No. Description
EHV-607CB/Y Chain 25m Black and Yellow
EHV-607CR/W Chain 25m Red and White
EHV-608CC Chain Connector for Cones
EHV-616SWC Sand Weighted Cone, 750mm
Chain Connector for Cones
Sand Weighted Cone
Retractable Barrier Unit
Each Skipper unit contains a highly visible 9 metre length retractable vinyl tape.Retractable Barrier Unit also features a self-tensioning ratchet which ensures the tape is pulled tight and held in position at all times.Simply attach to the top of any traffic cone.
Available in Red/White & Black/Yellow
Part No. Description
EHV-62845C Medium Clamp 45mm Jaw
EHV-62965C Large Clamp 65mm Jaw
Safety Clamp
• Rubber contacts in jaw to protect insulating material
• Joint with special guide ring• Material made of non brittle plastic• For use with orange neoprene or transparent
shrouding
Accessories
Part No. Description
EHV-618RB/YB Retractable Barrier Unit Yellow/Black
EHV-618RB/RW Retractable Barrier Unit Red/White
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
EHV-610CT
Part No. Size
EHV-648010 10mm Ø
EHV-648020 20mm Ø
EHV-648030 30mm Ø
EHV-648045 45mm Ø
EHV-648060 60mm Ø
Pneumatic Glove Tester
• Pneumatic Glove Tester – Fully insulating gloves each test stamped for working voltages ranging from 500V up to 36,000V – manufactured to EN60903
• The EN60903 and IEC903 standards advise visual inspection by inflation of the glove in order to detect air leaks. This can be carried out by the Pneumatic Glove Tester
• We can also re-test these gloves to the EN60903 Standard
EHV-622PGT
Part No. Description
EHV-611WC Light Duty Wheel Chocks
EHV-623FSC Face Shield Storage Case
EHV-624GBAG Glove Storage Bag
Light Duty Wheel Chocks Face Shield Storage CaseGlove Storage Bag
Accessories
Voltage & Continuity Tester
• Cat III Voltage Tester with LED and LCD Display• AC and DC Voltage test from 12-690V on LCD display• Rx LED for continuity test indication• Polarity indication• Single phase pole test• Phase rotation test with R/L LEDs displayed• High Voltage Indication• Frequency Range: 12~60Hz
Part No. Description
EHV-625RC Danger High Voltage Cone
EHV-625OC Danger Discharging Cone
EHV-625GC Vehicle Safe, Continue With Caution Cone
EHV-625CS Set of 3 Cones - Red, Orange & Green
A set of cones using a traffic light, colour coding system to alert workshop staff the status of the vehicle electrical discharge.
The colour coding system indicates:Red: High Voltage, Do Not TouchAmber: High Voltage, DischargingGreen: Discharged, continue with caution.
Live Cable End Protector
Cable end protector, shroud Push On Gripping Collar
• Flexible gripping collar, prevents damage to paper insulated cable.
• No deformation of copper wires when applied.• Holds securely in place.• Can also be used on cable lugs.
The cones are placed on the vehicle roof for high visibility and have rubber suckers to protect paintwork and prevent accidental removal.Available to buy individually.
T: (727)-608-4325 W: www.ehvsafety.com E: [email protected]
Part No. Size
EHV-648010 10mm Ø
EHV-648020 20mm Ø
EHV-648030 30mm Ø
EHV-648045 45mm Ø
EHV-648060 60mm Ø
EHV-622PGT
Part No. Description
EHV-611WC Light Duty Wheel Chocks
EHV-623FSC Face Shield Storage Case
EHV-624GBAG Glove Storage Bag
www.ehvsafety.com
@ehvsafety
(727) 608 4325
Here at Total Lockout, we use our years of expertise and knowledge to help businesses keep their workers safe when working on potentially dangerous machinery.
Total Lockout is a unique organisation in that we are one of a very few specialist providers of lockout tagout systems, trapped key interlocks and valve operating equipment globally. We help organisations who are seeking to implement safe isolation, safe working practices. We can advise and deliver a solution that will negate the risk of workplace accidents as a result of unexpected machinery (energy) start-up.
How do I know what glove size I need?
It’s very easy, simply grab a tape measure and wrap it around the knuckle area on your hand as indicated in the picture.
Measure your hand in inches then look at the chart below to know which size you will need.
Measurement “ Glove Size
8 Inches Size 8 - Small
9 Inches Size 9 - Medium
10 Inches Size 10 - Large
11 Inches Size 11 - Extra Large
12 inches Size 12 - Extra Extra Large
Information
Our full terms and conditions of purchase can be viewed by visiting our website and clicking on the link ‘Terms’.
This catalogue is published by: Total Lockout (Safety) Ltd, a company Registered in England and Wales, whose registered office is at 3 Warners Mill, Silks Way, Braintree, Essex,CM7 3GB, United Kingdom.
Our company registration number is 07258114
Our VAT registration number is 991 9134 84
Our contact details are as follows:
Worldwide Headquarters
Total Lockout (Safety) LtdUnit 10 Warner DriveSpringwood Industrial EstateBraintreeEssex, CM7 2YWUnited Kingdom
Tel: +44 (0)1376 325506Fax: +44 (0)1376 347484
United States & Canada
Total Lockout (Safety) LLC4500 140th Avenue NorthSuite 101Clearwater, FL 33762United States of America
Tel: (727) 608-4325Fax: (727) 538-4237
South East Asia
Total Lockout (Safety)Level 36, Menara Citibank,165 Jalan Ampang50450, Kuala LumpurMalaysia
Tel: +603 2169 7022
Authorised Distributors for...