YOUR BUILDING PARTNER

CAPABILITY STATEMENT

Elcord Capability Statement July 2015 2

Background We are a relatively new company that prides itself on being that. Even as our management team and staff have a long history of serving the Building, Mining and Construction Industries, it has been a new and rewarding experience to build this company with fresh thoughts and fresh ideas. Why choose Elcord? In short, because not only do you get the best quality and designs, but Elcord projects run more smoothly, saving you time and money. Elcord’s highly experienced management team have successfully delivered many of Western Australia’s most important construction projects. Our services can help you from the initial planning stage of your project to ensure your design will achieve the impact you desire, maintaining appropriate engineering standards, and be cost-effective to fabricate and install. Committed to Your Success Attention to Detail Flexibility and Choice Guaranteed Workmanship Value OHS and Environmental Policies: We have in place compliant Occupational Health and Safety and Environmental Policies and Procedures that are implemented throughout the company. Specialise in: Structural Steel Balustrade Commercial Glazing Cladding Metal Work Modular Housing

Elcord Capability Statement July 2015 3

Capacities & Capabilities

Workshops In 2013 we amalgamated three Workshops under one roof, to our newly built 2,600m2 workshops and offices at 15 Christable Way, Landsdale WA 6065

Operational employees We employ over 55 operational employees, including design, engineering, boilermakers, welders, stainless steel fabricators, glaziers, sheet metal workers, carpenters, crane drivers and riggers. The structural steel workshop is currently operating over two shifts.

Workshop/ Fabrication The workshops feature the following;

4 x 10 tonne gantry cranes

130Ton Press Brake and Guillotine up to 8mm plate

1000mm jaw opening Band Saw, capable of mitre cutting in both directions

500mm jaw opening Bandsaw

300mm plate width capacity Punch and Shear, plate up to 25mm thick

Pipe, tube and bar rollers

Plate roller

Numerous 400+ Amp welders

Automated glass cutting table - 4000mm x 4000mm Air Flotation Table with 6 tonne capacity free fall racks

Glass edge polishers

Bench saws

Circular saws

Routers

Lathes

Mills

8Ton Truck

Cutting, punching and forming Much of this work is completed in-house and, where required, outsourced to quality specialists.

Elcord Capability Statement July 2015 4

Welding processes We employ our own in-house Welding Supervisor, and Production Systems Manager.

NDT All Non Destructive Testing (NDT) is outsourced to a NATA endorsed inspection company. We offer the following welding processes: •GMAW and GMAW Pulse •Flux Cord Arc Welding (FCAW) •Manual Metal Arc Welding (MMAW) •Gas Tungsten Arc Welding (GTAW) – (TIG)

Mobile crane capacity

2.9 Tonne Maeda Mini Crawler Crane MC 305C

2.8 Tonne Maeda Mini Crawler Crane MC 285

Subject to individual requirements and job specifications, mobile cranes brought in to suit each project.

Site work We have our own specialised site installation teams; made up of qualified installers to handle all aspects of the site installation, be it erecting structural steel, glass, curtain walling, stick systems, aluminium, or stainless steel. Elcord has a full complement of mobile plant and equipment, which insures prompt mobilisation.

Surface treatment We use external painting contractors who are fully accredited and conform to ISO 9001:2008 standards.

Drafting division Elcord employs in-house drafts people. Our experienced and professional drafting staffs use the latest 3D software. Elcord Pty Ltd has access to a network of professional external drafts people.

Quality Assurance/ Accreditation Elcord is always working to improve quality assurance and accreditation systems. Elcord does offer full compliance reports, such as;

Coating Inspection Reports

Material Test Certificates

Weld Inspection Reports

Weld Procedures Qualification Reports

Welding Procedures Specification

Mill certificates

100% traceability of all fabrication & installation

Elcord Capability Statement July 2015 5

Current & Previous Project Experience

Project Name Scope of Work Value ($)

City Square Structural Steel / Glazing / Cladding $15,000,000

Fiona Stanley Hospital Structural Steel / Metal Work / Glazing $8,500,000

Perth City Link Structural Steel / Metal Work $3,000,000

Fiona Stanley Hospital, Bldg D Glazing Internal and External $1,300,000

Joondalup Hospital Glazing $1,600,000

541 Hay Street Structural Steel / Cladding $1,100,000

Leighton Beach Metal Work $1,000,000

Pro Build, Cockburn Central Balustrading $800,000

Cataby Abattoir Structural Steel $800,000

Notre Dame University Glazing / Structural Steel $700,000

Cannington Medical Centre Structural Steel / Glazing $360,000

226 Adelaide Terrace Metal Work $350,000

32 Henry Street (Apartments) Glazing / Louvers $300,000

Venn Art Gallery Structural Steel / Glazing / Metal Work $280,000

Optima Office Structural Steel / Glazing / Metal Work $240,000

BHP Housing Metal Work $180,000

Coolbelup Library Glazing $180,000

QEII Car Park Structural Steel / Metal Work $1,600,000

Butler Railway Station Structural Steel $2,500,000

One40William Stage 2 Structural Steel / Glazing / Metal Work $1,960,000

Midland Health Campus Façade Works $11,260,000

Cloisters on Hay Canopies / Glazing / Metal Work $1,050,000

Cockburn Gateway Shopping City Stage 3 Canopies / Glazing / Metal Work $2,260,000

999 Hay Street, Perth Structural Steel / Viewing Platform $768,000

Brookfield Place Tower 2 Podium Façade & Footbridge $6,017,000

New Children’s Hospital Block G Link Bridge $3,380,000

Elcord Capability Statement July 2015 6

Cladding

& Metal Works

Structural Steel

& Commercial Glazing

Elcord Capability Statement July 2015 7

Glazed Institute Canopies

Elcord Capability Statement July 2015 8

Modular Housing

Elcord Capability Statement July 2015 9

Key Personnel

Elcord Capability Statement July 2015 10

Contact Details:

Elcord Construction Pty Ltd 15 Christable Way

LANDSDALE WA 6065

Phone: (08) 9406 1500 Fax: (08) 9406 1555

Email: admin@elcord.com.au

Web: www.elcord.com.au

ABN: 56 131 885 464

ACN: 131 885 464

Insurance Details: $20,000,000 Legal Liability $20,000,000 Products Liability $5,000,000 Professional Indemnity

National Code of Practice for the Construction Industry Compliant

Member of Chamber of Commerce and Industry WA (CCIWA)

Elcord Enterprise Agreement 2013