EE101 Everlast Floor - Healthy - Durable - Attractive Commercial
2
EE101 EVERLAST TM FLOOR DESCRIPTION EVERLAST FLOOR is a 100% solids epoxy, marble-chip and quartz aggregate that is a troweled in place, evenly textured, slip-resistant finish with a thickness of between 1/8” and 3/16”. EVERLAST FLOOR does not require primer or bond coat components or the application thereof. EVERLAST FLOOR can withstand subtle movement of the sub-floor and is not prone to cracking. EVERLAST FLOOR meets all of the USDA guidelines for use in federally inspected facilities. EVERLAST FLOOR is a monolithic, custom-made, troweled on system that forms a physical bond between the material and the surface it is being applied and vulcanizes them together. The compound made is so tightly bonded together that corrosive materials cannot penetrate to begin the process of deterioration. RECOMMENDED USES EVERLAST FLOOR lends itself to many types of the industry’s needs. Retail it’s a cost effective and attractive alternative to conventional terrazzo flooring in hallways, restrooms and buffet areas, It’s unaffected by repeated use of detergents or cleaning compounds, Kennels It is resistant to urine and we have a special slip-free finish that will not hurt animals paws. Food Processing it’s clean, sanitary and withstands heavy steel wheel traffic, Freezers it withstands low temperatures, Restaurant Kitchens it provides a slip-resistant surface, even when wet. Health Inspectors love it because there are no joints or crevices to trap dirt or food particles. EVERLAST FLOOR withstands sever exposures to grease, oil, water soaking, many acids, alkali, heavy traffic, sugar, animal fats, blood, salt and other c orrosive materials. FEATURES • Non-porous and non-absorbent • Chemical resistant • Impact and shock resistant • Excellent low temperature properties • Unlimited life expectancy • Low odor – no voc’s • No joints or seams for water penetration • Anti-microbial – bacteria will not collect • No delamination • Available in many color combinations PACKAGING • Packaged in a 3-componant kit; a box of aggregates, a gallon can of the mainresin and a quart can of curing agent. One kit covers approximately 25 sf of floor TYPICAL VALUES PROPERTY 2 years (between 50°F and 85°F) (10°C and 29°C) 55°F to 90°F (13°C to 30°C) @ less than 75% R.H. All components to be completely mixed together. Units are not to be split. Apx. 25 sf. Per unit 20-30 minutes @ 75°F (24°C) Mixed, poured and troweled 8 – 12 hours 10-16 hours 1 week >500 psi) w/ concrete failure (ASTM D-4541) 17,000 psi (ASTM D-579) 7,100 psi (ASTM D-307) 10,000 psi (ASTM D-580) 2.5 x10-5 (ASTM D-696) No VOC’S <3 (ASTM E-662) >24,000 psi (ASTM D-4226) 0.8% (ASTM D-2794 - shall not exceed 1%) 0.018gm (ASTM D-501) Self-Extinguishing (ASTM D-635) 158°F (ASTM D-2794) >0.2% (ASTM C-413) 1.17 lbs/sf. @1/8” thickness Wet leather Static 1.05 / Sliding 0.74 Wet rubber Static 1.10 / Sliding 0.72 SHELF LIFE APPLICATION TEMP & HUMIDITY MIXING RATIO COVERAGE WORKING TIME APPLICATION METHOD READY FOR TOP DRESSING READY FOR FOOT TRAFFIC READY FOR HEAVY TRAFFIC ADHESION STRENGTH COMPRESSIVE STRENGTH TENSILE STRENGTH FLEXURAL STRENGTH COEFFICIENT OF LINEAR EXPANSIO VOC SMOKE DENSIT IMPACT RESISTANCE INDENTATION ABRASION RESISTANCE FLAMMABILITYEAT RESISTANCE HEAT RESISTANCE WATER ABSORPTION WEIGHT SLIP RESISTANCE PHYSICAL/CHEMICAL CHARACTERISTICS Based upon a seven day cure at 75°F (24°C)
Transcript of EE101 Everlast Floor - Healthy - Durable - Attractive Commercial
