Echo Round 3.5 Exterior - SPI Lighting · 9/18/2020 · P:262.242.1420 | [email protected] |...
Transcript of Echo Round 3.5 Exterior - SPI Lighting · 9/18/2020 · P:262.242.1420 | [email protected] |...
P:262.242.1420 | [email protected] | Last Revised: 2/1/2021 | Design Rights Reserved | EEW11900 | 1 of 4
Echo Round 3.5 ExteriorEEW11900 46 in
PROJECT DETAILSJOB NAME: TYPE: NOTES:
DESCRIPTION
Echo Round 3.5 LED features a compact housing, integral powersupply, and efficient optical design. This unobtrusive lighting solutionwith various lumen output levels is perfect for exterior applicationsthat need a soft wash on a façade, or something to brightly light up asign. Multiple mounting options allow for individual fixtures orcontinuous runs. For a complimentary lighting layout, contact ourapplications team at [email protected].
FEATURES & BENEFITSStainless steel external fasteners will not rust or corrode●
Field adjustable housing locks into position, enabling precisefixture alignment for high-quality design performance
●
Dust cover lens standard●
Handcrafted in USA●
SPECIFICATIONSLIGHT SOURCE: White LED light engine●
LUMEN MAINTENANCE: L70 = >50,000 Hrs.●
CCT: 3000K, 3500K, or 4000K●
VOLTAGE: 120-277V standard●
DRIVER: Integral Class II power supply standard●
DIMMING: 0-10V controls standard to 1% on LED light engines;Lutron control options available
●
CONSTRUCTION: Extruded aluminum construction providesdurable protection for internal components and is recyclable;cast aluminum end caps protect internal components and arerecyclable
●
FINISH: Housing and mounting components finished to match.To specify separately, contact factory. Choose from more than30 thermoset polyester powder coat paint colors. RAL®,Pantone®, or custom finishes available upon request.
●
MODIFICATIONS: Consult factory for all modification requests,including RGB and static color options
●
APPROVALS: ETL listed to UL standards (US and Canada) foruse in wet locations
●
P:262.242.1420 | [email protected] | Last Revised: 2/1/2021 | Design Rights Reserved | EEW11900 | 2 of 4
DIMENSIONS
L146.3 in117.6 cm
L244.6 in113.3 cm
H16.5 in16.5 cm
H26.2 in15.7 cm
H36.5 in16.5 cm
D15.8 in14.7 cm
D25.8 in14.7 cm
OAP26.5 in67.3 cm
MC139.8 in101.1 cm
MC238.4 in97.5 cm
MC339.8 in101.1 cm
Mounting WeightConsult Factory.
CONFIGURATORTo configure your spec sheet online, go to www.spilighting.com/EEW11900. Not all options are available in all configurations; consult factory fordetails.
Required Field *
Catalog
EEW11900Light Source* Primary Finish* Voltage* Lamp Options* Mounting* Dimming* Accessories
Other ThanStandard Options
A B C D E F G
A - LIGHT SOURCE *
To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LEDlampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based onapplication.
L11W | White 11W LED Light Engine | Delivered Lumens: 972
L22W | White 22W LED Light Engine| Delivered Lumens: 1,830
L43W | White 43W LED Light Engine| Delivered Lumens: 3,660
See last page for finish options
B - VOLTAGE *
120-277V | Universal Voltage
C - LAMP OPTIONS *
Delivered lumens shown are at 4000K CCT; apply multiplier for delivered lumens at other CCT.
3000K 1 | 3000K CCT
3500K 2 | 3500K CCT
4000K | 4000K CCT
1 Apply .95 multiplier for delivered lumens2 Apply .97 multiplier for delivered lumens
P:262.242.1420 | [email protected] | Last Revised: 2/1/2021 | Design Rights Reserved | EEW11900 | 3 of 4
D - MOUNTING *
Hub, Horizontal and Run mount options use either a stem or hub canopy at each end to mount over a standard 4" octagonal junction box,auxiliary mounting holes are provided. INSTALLATION NOTES: During installation the contractor is responsible to use actual fixtures to ensureaccurate mounting centers from one fixture to the next along the length of the linear run. Choose a mounting from below:
HUB | Hub Mount
HZT | Horizontal Mount
RUN 3 | Continuous Run OAL | Specify Length of Run Length:
3 For a take-off and pricing, contact factory
HUB HZT
E - DIMMING *
DF_DIM1 | 1% dimming with 0-10V control (default)
LUT0 | Lutron Hi-Lume, (LDE1) Eco System, Fade to Black Dimming
LUT2 | Lutron Hi-Lume, (LTEA2W) 2-Wire, 1% Dimming (120V Forward Phase Only)
LUT5 | Lutron 5 Series, (LDE5) Eco System 5% Dimming
F - ACCESSORIES
LV1 | Black Unidirectional Louver Internal
G - OTHER THAN STANDARD OPTIONS
When selecting HZT mount, you may specify a projection other than standard. Specify overall projection required from wall to the end of thefixture. Overall projection greater than standard includes aircraft cable support kit.
OAP | Projection length other than standard. Length:
P:262.242.1420 | [email protected] | Last Revised: 2/1/2021 | Design Rights Reserved | EEW11900 | 4 of 4
Available Finishes
Not all finishes are available in all configurations; consult factory for details.
Paint ColorsPT01Super White
PT02White
PT03Morning Light
PT04Warm White
PT05Putty
PT06Warm Beige
PT07Light Taupe
PT08Medium Taupe
PT09Medium Grey
PT10Dark Grey
PT11Black
PT12Dark Chocolate
PT13Warm Grey
PT14Light Grey
PT15Sage
PT16Spruce
PT17Red
PT18Deep Red
PT19Blue
PT20Dark Green
PT21Pearl White (Metallic)
PT22Platinum (Metallic)
PT27Deep Copper (Metallic)
PT28Dark Stainless (Metallic)
PT29Red Brass (Metallic)
PT31Medium Bronze (Metallic)
PT32Dark Bronze (Metallic)
PT33Dark Blue
PT40Yellow
PT41Orange
PT42Sky Blue
PT43Teal
PT44Green
PT45Purple
PT46Aluminum (Metallic)
PT47Deep Red Brass (Metallic)
PT48Brass (Metallic)
PT49Bronze (Metallic)
PT51Matte White