EasySplicer Product Code: COFESPLICER High … · Pull test, loss estimation & splicing error...
1
Product Code: COFESPLICER Barcode: www.ellies.co.za Auto adjusts to environmental changes for eg: moisture, altitude, temperature. Easy calibration in seconds. V-grove splicing method. Single and multi-mode. Built-in oven. Pull test, loss estimation & splicing error reports. Built-in battery pack. Perform ±60 splices on fully charged battery. Easy to use menu. TECHNICAL INFORMATION KIT CONTENTS EasySplicer High precision instrument for fibre fusion. 1 EasySplicer 1 Rechargeable power supply 1 Fibre cleaver 1 Pair Fibre 250μm holders (Black) 1 Pair Fibre 900μm holders (Blue) 1 Pair Fibre tube holders (Red) 1 Fibre stripper 230 800g 1 53 98 PACKAGE DIMENSIONS Weight (g) QTY (mm) (mm) (mm) Width Height Depth D Splicing method: V-groove (cladding alignment). Fibre Types: SMF, MMF 50/125μm and 62.5/125μm fibre, 250μm primary and 900μm secondary coated fibre. Fibre Handling: Fibre holders, 3 pairs (250, 900 and loose tube). 3 pre-defined: Splice Programs SMF, MMF, OM1. Typical Splice Loss: 0.03dB SMF, 0.01dB MMF. Altitude Compensation: Automatic up to 4100 meters altitude with compensation for moisture and temperature. Typical Cycle Time: 7s + 35s (splice + oven cycle). Sleeve Dimensions: Max 64mm length, 2-7mm diameter supported by oven. Color LCD Display: 2.8, 320x240 pixels. Oven: Ceramic/teflon-type. 40mm sleeves in about 35 sec. Camera Magnification: 140x. Operating Environment: 0-45°C, max 95% RH, non-condensing. Power: External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Built-in Li-ion battery: 3400mAh Splicing Capacity: 60 splices + oven cycles. Focusing on the FTTH installer the EasySplicer boasts a rugged, compact design and easy to use interface. A powerful built-in battery pack allows the unit to perform an estimate of 60 splices before recharging is required. Packed in a convenient carry case, complete with accessories making it ideal for indoor and outdoor fibre optic installations.
Transcript of EasySplicer Product Code: COFESPLICER High … · Pull test, loss estimation & splicing error...
Product Code: COFESPLICER
Barcode:
www.ellies.co.za
Auto adjusts to environmental changes for eg: moisture, altitude, temperature.
Easy calibration in seconds.
V-grove splicing method.
Single and multi-mode.
Built-in oven.
Pull test, loss estimation & splicing error reports.
Built-in battery pack.
Perform ±60 splices on fully charged battery.
Easy to use menu.
TECHNICAL INFORMATION
KIT CONTENTS
EasySplicerHigh precision instrument for fibre fusion.
1 EasySplicer1 Rechargeable power supply1 Fibre cleaver1 Pair Fibre 250μm holders (Black)1 Pair Fibre 900μm holders (Blue)1 Pair Fibre tube holders (Red)1 Fibre stripper
230 800g 153 98
PACKAGE DIMENSIONS
Weight (g)
QTY(mm)(mm)(mm)
Width Height Depth D
Splicing method: V-groove (cladding alignment).
Fibre Types: SMF, MMF 50/125µm and 62.5/125µm fibre,
250µm primary and 900µm secondary coated fibre.
Fibre Handling: Fibre holders, 3 pairs (250, 900 and loose tube).
3 pre-defined: Splice Programs SMF, MMF, OM1.
Typical Splice Loss: 0.03dB SMF, 0.01dB MMF.
Altitude Compensation: Automatic up to 4100 meters altitude with
compensation for moisture and temperature.
Typical Cycle Time: 7s + 35s (splice + oven cycle).
Sleeve Dimensions: Max 64mm length, 2-7mm diameter supported by oven.
Color LCD Display: 2.8, 320x240 pixels.
Oven: Ceramic/teflon-type. 40mm sleeves in about 35 sec.
Camera Magnification: 140x.
Operating Environment: 0-45°C, max 95% RH, non-condensing.
Power: External power supply, 6V, 1.5A, 100-240VAC 50-60Hz,
Built-in Li-ion battery: 3400mAh
Splicing Capacity: 60 splices + oven cycles.
Focusing on the FTTH installer the EasySplicer boastsa rugged, compact design and easy to use interface.
A powerful built-in battery pack allows the unit to perform an estimate of 60 splices before recharging is required.
Packed in a convenient carry case, complete with accessories making it ideal for indoor and outdoor fibre optic installations.
