EASYKIT - MEDICA · 2020. 12. 1. · The EASYKIT is a straightforward and reliable set, designed...
Transcript of EASYKIT - MEDICA · 2020. 12. 1. · The EASYKIT is a straightforward and reliable set, designed...
The EASYKIT is a straightforward and reliable set, designed for the mixing and injection of acrylic bone cements during vertebroplasty, cementoplasty and kyphoplasty procedures.
The EASYKIT is available in two references:
• EASYKIT for low viscosity bone cements.
• EASYKIT M for low viscosity bone cements.
Mixing & Injection Systemfor Vertebroplasty, Cementoplasty and Kyphoplasty bone cements
EASYKIT
The product must be stored unopened in its original packaging in a clean environment and at room temperature. The Easy Kit is packaged in a double barrier packaging which guarantees its sterility. The blister is sterile and can be put on the operating table.The products are sterilized with ethylene oxide according to ISO 11135 and are ready to use. Single use only. Do not re-sterilize. For any futher information, please refer to the IFU.
The product must be stored unopened in its original packaging in a clean environment and at room temperature. The Easy Kit is packaged in a double barrier packaging which guarantees its sterility. The blister is sterile and can be put on the operating table.The products are sterilized with ethylene oxide according to ISO 11135 and are ready to use. Single use only. Do not re-sterilize. For any futher information, please refer to the IFU.
Storage & products
Properties
• Efficient & Comfortable
• Closed Mixing
• 5 robust injection syringes (3 ml)
• Metallic (M) or glass ball
• Luer Lock
• Sterile blister
The EASYKIT provides multiple benefits:• Mixing and transfer with limited monomer
fumes• Easy mixing, reproducible, homogeneous
and rapid • Direct cement transfer into the syringes• No contact between cement/operator• Injection volume up to 15cc
DESIGNATION REFERENCE
EASYKIT
EASY KIT T060409EASY KIT M T060415
Cré
dits
pho
tos
: ©
Tek
nim
ed -
TF4
3106
06/In
d 2
- 05
/201
7
1098
7654
1 32
15 mm
1 2
Distributed byDistributed by
Head offices: 8, rue du Corps Franc-Pommiès 65500 VIC en BIGORRE (France) Tél (33) 5 62 96 88 38 Fax (33) 5 62 96 28 72
Administration and supply-chain offices:Z.I de la Herray65500 VIC en BIGORRE (France)Tél (33) 5 62 96 88 38Fax (33) 5 62 96 28 72
Sales and engineering departments:Z.I. de Montredon - 12, rue Apollo31240 L'UNION (France)Tél (33) 5 34 25 10 60 Fax (33) 5 34 25 27 39
Classe I STERILEManufactured byManufactured by