EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES
-
Upload
soulstalker -
Category
Education
-
view
2.929 -
download
27
description
Transcript of EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES
![Page 2: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/2.jpg)
ESD
• Electrostatic Sensitive Devices (ESD) are electronic components and other parts that are prone to damage from stray electric charge.
• Extensive (and permanent) damage to static sensitive devices can result from mishandling and inappropriate methods of storage and transportation.
![Page 3: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/3.jpg)
STATIC ELECTRICITY
• When two dissimilar, initially uncharged non-conducting materials are rubbed together, the friction is responsible in transferring charge from one material to.
• The process of electron transfer known as 'triboelectric charging'.
• The amount of charge depends on factors like the rate of separation, humidity etc.
![Page 4: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/4.jpg)
POSITIVE TRIBOELECTRICThe following materials give up electrons and become positive when charged when rubbed
against other materials:
• Air (most positive) • Dry human skin• Leather • Rabbit fur • Glass•Human hair• Nylon • Wool•Lead •Cat fur• Silk • Aluminium• Paper (least positive).
![Page 5: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/5.jpg)
NEGATIVE TRIBOELECTRICThe following materials tend to attract electrons when rubbed against other materials and
become negative when charged:
• Wood (least negative) • Amber• Hard rubber • Nickel, copper, brass & silver• Gold and platinum • Polyester• Polystyrene • Saran• Polyurethane • Polyethylene• Polypropylene • Polyvinylchloride (PVC)• Silicon • Teflon (most negative)
![Page 6: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/6.jpg)
VALUE ELECTROSTATIC
![Page 7: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/7.jpg)
CAUSES ESD
• Electrostatic discharge from a human body • charged material to the ESDS device.• Electrostatic discharge from the device• Field induced discharges
![Page 8: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/8.jpg)
ESD WARNING
![Page 9: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/9.jpg)
![Page 10: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/10.jpg)
HANDLING ESD EQUIPMENT
• Placards installed on the ESD LRU• The ESD printed circuit boards are identified with a static
sensitive placard.• Contaminated or unwanted material should be kept clear
of the sensitive devices. • Connect the wrist strap into the Electrostatic Ground Jack
of the card file or recognised aircraft ESD ground point.• LRU or circuit boards are to be placed in the correct
conductive bag or container which must display an ESD label.
![Page 11: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/11.jpg)
TRANSPORTING ESD EQUIPMENT
1. Use of wrist straps which must be worn when handling ESD2. Use a heel strap3. Use of static dissipative floor and bench mats.4. Avoidance of very dry environments5. Availability of ground jacks6. Use of grounded test equipment7. Use of low-voltage soldering equipment and anti-static soldering
stations 8. Use of anti-static insertion and removal tools for integrated
circuits.9. Avoidance of nearby high-voltage sources10.Use of anti-static packaging
![Page 12: EASA PART-66 MODULE 5.12 : ELECTRONICS SENSITIVE DEVICES](https://reader033.fdocuments.in/reader033/viewer/2022061114/5461e343b1af9f71408b4d83/html5/thumbnails/12.jpg)
WRIST STRIP