17

www.systemair.com

Vent

ilatio

n Pr

oduc

ts

2

Systemair ABSystemair is a leading ventilation company with sales companies in 38 countries in Europe, North America, Asia, the Middle East, South Africa and Australia. Headquarter and largest production unit is since the company started in 1974 situated in Skinnskatteberg, Sweden. We have 12 production facilities located in; Sweden, Norway, Denmark, Germany, Slovenia, Slovakia, Lithuania, Spain, Malaysia, USA and Canada, with a total production area of more than 170 000 sqm. Sales amounted to approx. SEK 3.3 billion for the fi scal year 2008/2009 and the Group employs over 1900 people worldwide. Since October 2007 Systemair is listed on the OMX Nordic Exchange in Stockholm. Our testing laboratory and development center are among the most mo dern with in the ventilation indust ry in Europe, accredited by AMCA. Systemair is certifi ed in accordan ce with ISO 9001 and ISO 14001.

“The Straight Way” was the con cept idea behind the company’s fi rst pro duct – the inline circular duct fan. Today “the straight way” express es our ambition to make life easier for our cus to-mers as it stands for the total concept of our brand, profi le and product range. Within Europe we deliver our ba sic pro-duct range from local warehouses within 24 hours, from our distri bution centres in Sweden and Germany within 72 hours. Our catalogues can be down loa ded from the Systemair web site: www.systemair.com

The straight way

Systemair has every year since 1995 been AAA-rated

3

To the left: From Systemair’s Research and Development center – Demonstration of Sinus-A air distribution.Above: Systemair’s Annual General Meeting 2009, in the new assem-bly hall, at the Expo Center.

Product exhibition in Systemair’s Expo Center

Systemair manufactures ventilation products in Sweden, Nor way, Den mark, Germany, Slovenia, Slovakia, Lithuania,

Spain, USA, Malaysia and Cana da

4

Centrifugal fan with easy removable fan scroll, external rotor motor and impel-ler mounted on the access cover to facilitate easy maintenance. Casing of galvanized steel, lid insulated with 40 mm rockwool. The fan has low overall height. Max air fl ow 3100 m3/h.

Circular inline duct fansFK

SG

VK

IGK

RSK

LDC

FFR

CB

RE

REU

REE

• Speed-controllable by thyristor or 5-step transformer• Integral thermal contacts• Can be installed in any position • Maintenance-free and reliable

K

K-series for duct installation – mounting bracket included as standard. Spigot length according to EN 1506:1997. KV-series for installation directly onto walls. Backward-curved impeller and external rotor motor. Casing of galvanized steel. No leakage, tightness class C according to EN12237. Max air fl ow 1700 m3/h.

KD

For duct installation. External rotor motor with mixed fl ow impeller. Speed-controllable by thyristor or 5-step transformer. Casing of galvanized steel. Max air fl ow 8500 m3/h.

RVK

For duct installation. Back ward-curved impeller and external rotor motor. Speed-controllable by thyristor or 5-step transformer. Casing of fi breglass reinforced plastic. Max air fl ow 1700 m3/h.

Insulated duct fans• Speed-controllable by thyristor or 5-step transformer• Integral thermal contacts• Low noise level• Maintenance-free and reliable

KVKE

Insulated centrifugal fan with backward-curved impellers and external rotor motor. The access cover can be removed from the unit for service. Casing of galvanized steel, thermally and accoustically insulated with 50 mm mineral wool. Max air fl ow 2200 m3/h.

Centrifugal fan with forward-curved impel-ler and external rotor motor. The fan is mounted on a plate to facilitate easy re mo val for clean-ing and servicing. Casing of galvanized steel, accoustically insulated with 50 mm mineral wool. Max air fl ow 2800 m3/h.

KVK

KVO

5

Rectangular- and square duct fans• Speed-controllable by thyristor or

5-step transformer • Integral thermal contacts• Can be installed in any position• Maintenance-free and reliable• Swing out

DS

LDR

VK

FFK

RB

VBR

S-ET/STDT

RTRE

RTRD

RE

REU

REE

Impeller with backward-curved blades and external rotor mo-tor mounted on a swing-out access cover to facilitate easy maintenance. Casing of galva-nized steel. Max air fl ow 12 000 m3/h. RSI is thermally and accoustically insulated with 50 mm mineral wool.

KE/KT

Fan with forward-curved impeller blades and external rotor motor. The casing is manufactured from galvanized steel. Airfl ow from 930-8900 m3/h.

MUB

Impeller with backward-curved blades, external rotor motor or standard IEC motors. Modular system with detachable panels allowing fl exible ventilation solu-tions. Ca sing made from aluminium profi le, plastic corners and gal-vanised double skin steel panels. Insu lated with 20 mm fi breglass.Max air fl ow 20 000 m3/h.

KBT with impeller manufactured from galvanised sheet steel with forward-curved blades. KBR with impeller manu -factured from aluminium with backward-curved blades. Casing is manufactured from double-skinned galvanised sheet steel, insulated with 50 mm mineral wool. Swing-out door for easy inspection and service. Max temperature of transported air 120°C max air fl ow. Max air fl ow 7100 m3/h.

KBT/KBR

Thermo fans

MUB-K2

All MUB-K2 fans have IEC standard motors, which can be speed controlled by transformer, except size 630-D4. An isolator switch is mounted on the casing. All MUB-K2 motors (except 630D4) are D/Y con-nected for two speed operation. Motor protection by thermal contacts, to be connected to an external motor protection device. Max air fl ow 16 000 m3/h.

RS/RSI KDRE/KDRD

KDRE/KDRD fans have an exter-nal rotor motor with a mixed fl ow type impeller. The KDRE/KDRD series is notable for its relatively high static pressure and high level of effi ciency. The casing is manufac-tured from galvanised sheet steel.Max air fl ow 11 000 m3/h.

KVD

KVB

KVD/KVB box fans. KVD has direct driven motors and single skinned panel. KVB has belt driven motors and double skinned panel where low noise is important. Filters can be incorporated in the units for supply airsolutions. 2 speed and disconnect switches are available as accessories. Max air fl ow 18 000 m3/h.

Thermo fans are having bifurcated motors, which means that the motor is out of the airstream. This makes it possible for the fan to handle higher temperature of the transported air and kitchen air grease is not coming into the motor.

6

SSD

FDS

ASK

VKS

ASS

ASF

RE

REU

S2S

REE

Roof fans• Speed-controllable• Integral thermal contacts• Low sound level• Maintenance-free and reliable• Vertical or horizontal exhaust

DVS/DVSI

DHSThe DVS/DHS models have impellers with backward-curved blades and external rotor motors. All three phase motors are D/Y connected allowing two-speed operation if required. The casings are made from sea-water resistant aluminium and the base frame is pow-der-coated galvanised steel. The impellers are manu factured from polyamide PA6 25GV or aluminium, depending on the sizes. Also available with tilting device. DVSI with 50 mm mineral wool insulation for low noise level.

The DVN model has impellers with backward-curved blades and

standard motors out of the air stream. The mo-tor is suspended on ef-

fective vibration dampers, casing is manufactured from

seawater resistant aluminium and the base frame is powder-coat-

ed galvanised steel. The three-phase motor are D/Y connected and fully speed-controllable. For 120°C, continuous operation. The DVNI version has a 50 mm mineral wool insula-tion for lower sound level.

The octagonal casing is manufactured from seawater resistant aluminium. The base frame consists of galva-nised steel. The impeller with backward-curved blades is also manufactured from galvanised steel. Motor cooling with fresh air via air duct. Thermal motor protection on request. For 120°C, continuous operation.

DVV

DVN/DVNI

TFSK

TFSR

The TFSR and TFSK models are fi tted with a centrifugal fan with backward-curved blades and external rotor motors. The fans are manufactured in powder-coated, galvanized sheet steel and are delivered in the standard colours of black or brick red. The TFSR range is supplied with a switch and cable for fast connection to the mains via the connection box on the roof curb TOB or TOS. The TFSK range is supplied with a switch and cable, easy con-nected to our standard roof curbs TG, FDS and SSD.

The TOE/TOV models have impel-lers with backward-curved blades and external rotor motors. The casing is manufactured in black powder-coated galvanized sheet steel. These fans have motors

which can be tilted outwards to facilitate inspection and servicing. The motor is sus-

pended on effi cient vibration dampers. Exhaust air is directed vertically from the fans, which prevents problems caused by wet snow and staining of the roof.

TOV

Deutsche Bahn, Berlin

7

EC-fans• 100% speed controllable• Integrated motor protection• Low noise level• Safe and maintenance free operation• Energy-saving

The DVC/DVCI roof fans are driven by EC-external rotor motors. The input voltage for single phase units can vary between 200 and 277V, for three phase units between 380 and 480V. All motors are suitable for 50Hz and 60Hz. Motor protection is integrated in the electronics of the motor, no additional external motor protection device is needed. Two potentiometers in the electro-nics allow for 2 set values (day/night), one additional contact for an external setting. Casing from seawater-resistant aluminum, base frame powder coated. Size 225-315 have backward curved impellers manufactured from polyamide PA 6, size 355-400 from aluminium. The DVCI has 50 mm mineral wool insulation for low noise level. DVC-P for constant pressure systems.

DVC/DVCI-ECDVC-P

MUB-EC

The Multiboxes MUB-EC are driven by EC-external rotor motors. The power electronics are integrated in the motor housing. All motors are suitable to be used for 50/60Hz. All models are equipped with impellers with backward curved blades, manufactured from aluminium (size 315 PA6 – plastic). MUB EC can be used as fan module in individual supply or exhaust air applications.

K-EC

KVKE-EC

SSD

FDS

ASK

ASS

FTG

TDA

VKS

VKM

FGV

SRKG

UGS

REV

MTV

The K-EC series is designed for installation in ducts. All the K-fans have minimum 25 mm long spigot connections. The fans have backward-curved blades and external rotor motors (EC). The FK mounting clamp facilitates easy installation and removal, and prevents the transfer of vibration to the duct. The fans are delivered with a pre-wired potentiometer(0-10V) that allows you to easily fi nd the desired working point.

The KVKE motor and impeller are mounted on the access cover for ease of maintenance. The service cover can be easily removed by withdrawing the hinge pin. To protect the motor from overheating, the fans have integral thermal contacts with automatic reset. The fans can be installed in any position and are easy to connect to spiral ducts using FK mounting clamps. The KVKE models are manufactured from galvanised sheet steel and are thermally and acoustically insulated with a 50 mm layer of rock-wool with a surface liner which prevents the migration of fi bres into the airstream. The fans are delivered with a pre-wired potentiometer(0-10V) that allows you to easily fi nd the desired working point.

Sun palace, Budapest

8

Smoke and heat extract fans EN 12101-3 certifi ed, CE-labelledHA

Axial fanHA...(F) F400 and HABV...F600• Sizes 315 to 1800 mm• P-HA with square wall plate with inlet cone, manufactu red

from steel, hot dip galvanized, up to size 1000Max air fl ow 250 000 m3/hCertifi ed for 400°C/120 min and 600°C/120 min.

AXC

Axial fan AXC...F300/F400AXC fans are available in duct mounted versions as well as roof (D) and plate mounted (P). Tailor made to fi t requirements of customers regarding air volume and pressure drop. Casing manufactured from steel, hot dip galvanised, sizes 315 to 1600. IEC standard mo tor in IP55. Iso F (medium tem perature 55°C), also available with two speeds. Max air fl ow 180 000 m3/h. Certifi ed for 300°C/120 min.and 400°C/120 min.

AXCG

Axial fan two stage...F300/F400Two stage axial fans for high pressure drops (up to 2000 Pa st). Sizes 315 to 1600. Certifi ed for 300°C/120 min. and 400°C/120 min.

WVAWVI

Centrifugal fan WVA and WVI... F400/600Centrifugal fan for wall mounting. Casing from galvanized steel, powder coated. Backward curved centrifugal impellers, in 400°C version made from galvanized steel, in stainless steel in 600°C version. WVA to be installed outside the fi re zone, WVI with insulated motor to be installed inside the fi re zone, with cooling duct ZHZ to be connected to the motor compartment. Max air fl ow 40 000 m3/h. Certifi ed for 400°C/120 min and 600°C/120 min.

DVV

Roof fan DVV...F400/600Smoke-extract roof unit with backward-curved impeller. Also tested for dual use applications (normal ventilation and smoke extract). Max air fl ow 55 000 m3/h. Certifi ed for 400°C/120 min and 600°C/120 min.

The KBR/F fan smoke extract units are used in case of fi re to extract smoke gases from rooms, and also during

normal working conditions for standard temperature up to 200°C. The KBR/F unit

has backward curved impellers made of galvanized steel except size 355 which is a steel impeller painted RAL 9005. The unit has a swing out door for easy

inspection and service. Certifi ed for 400°C/120 min.

Centrifugel fan KBR/F...F400KBR/F

DVG-VDVG-H

The DVG-V/DVG-H with casing manufac-tured from seawater resistant alumini-

um. The impeller with back-ward-curved blades is

manufactured from galvanised steel. Smoke and heat extract unit + nor-mal ventilation up

to 120°C continuous operation.

Up to 400°C/120 min (F400/120, F400/90, F300, F200).

9

Jet fansFor car parks:• Three sizes (315, 355 and 400 mm) circular

or octagonal design• Also available with fully reversible blade set-

tings (on request)• Fan casings and outside sheet for fan housing

and silencers manufactured from pre-galva-nized steel

• Fan module sound insulated for low noise level

AJ8

AJR

Car park jet fansThe Systemair jet fans are equipped with adjustable aluminium impellers and IEC standard motors, available for ambient tem-peratures for CO exhaust (between 40°C and 55°C) or for high temperature smoke exhaust (300°C/2h) applications. Certifi cation in accordance with EN 12101-3. Two speed high temperature fans can also be used for normal CO extract venti-lation (dual purpose fans).

For tunnels:• Standard sizes from 500 to 1600 mm• Thrust up to 2000 N• Truly reversible impellers• High temperature motors

The Dubai mall, Dubai U.A.E.

Tunnel jet fansHigh performance tunnel fans, with undirectional or trulyreversible impellers. Capacities of over 2000 N. To reduce CO levels and other pollutants and to increase visibility affected byexhaust smoke from diesel cars. Available in galvanized or painted fi nish, paint to RAL colourcodes. Sturdy fi xing to different tunnel ceiling shapes. Available for normal ambient temperatures and for high temperature app-lications, either 250°C, 300°C for 60 or 120 minutes or as per customer specifi cation.

Systemair tunnel fans are manufactured at production facilities in Germany and Malaysia. 328 tunnel fans deliv-ered in 2009 to Highway A32 in Italy.

10

VK

GFL-AR

EV-AR

MFA-AR

SG-AW/AR

S-ET

AWE-SK

RTRE

RTRD/RTRDU

REU

REE

Axial fans

• Speed-controllable• Integral thermal contacts• Maintenance-free and reliable

AR

Wall or duct mounted axial fl ow fans with speed controllable exter-nal rotor motors. AW equipped with a square wall plate. AR with circular housing with fl anges for duct mounting. Housing made from galvanized sheet metal, powder coated in black. Max air fl ow 50 000 m3/h.

AW

AXC

The AXC-range of long cased medium pressure axial fan is available in sizes 315 up to 1600 mm impeller dia meter. The adjustable pitch setting offers a wide performance and maximum fl exibility to match pre-cisely individual airfl ow requirements. The AXC axial fan has been performance tested in accordance with DIN ISO 5801, DIN 24163 and AMCA 210-99 on the Systemair fan test rig. Max air fl ow 180 000 m3/h.

AXCBF range of bifurcated medium pressure axial fan has been developed for applications with an atmos-phere which would either require special motors or reduce the lifetime of a standard motor. The motors are out of the airstream. Available in sizes from 250 up to 800 mm impeller diameter. Max air fl ow 20 000 m3/h.

AXCBF

Explosion proof fans ATEX certifi ed

KTEX

Rectangular duct fanEx(e) increased safety. Ex-classifi ed terminal box available as ac-cessory. Motor speed controllable by transformer. Air fl ow up to 5000 m3/h. Temperature class T1-T3.

RVK 315

Circular duct fanEx(e) increased safety. Casing consists of conducting plastic. Ex-classifi ed terminal box available as accessory. Motor speed controllable by transformer. Air fl ow up to 1020 m3/h. Temperature class T1-T3.

EX 140/180

Radial fanEx(e) increased safety. Motor protection device MSEX available for EX140 and EX180, 230V and 400V models available. Air fl ow up to 1180 m3/h. Temperature class T1-T3.

REV

S-DT2SKT

ESD-F

11

DKEX

Radial fanEx(e) increased safety. Motor speed controllable by transformer. Air fl ow up to 5000 m3/h.Temperature class T1-T3.

AW-EX

Axial wall fanEx(e) increased safety. Sizes 355 and 420 are approved for tem-perature class T4. Ex-classifi ed terminal box available as accessory. Motor speed controllable by transformer. Air fl ow up to 11 500 m3/h. Temperature class T1-T3 and T4.

DV-EX

Roof fansEx(e) increased safety. Motors speed controllable by transformer. Ex-classifi ed terminal box available as accessory. Air fl ow up to 8600 m3/h.Temperature class T1-T3.

DVV-EX

AXC-EX

The AXC-EX standard range of long cased medium pressure axial fan is available in sizes 315 up to 1600 mm impeller diameter. The axial fan has been performance tested in accordance with DIN ISO 5801, DIN 24163 and AMCA 210-99 on the Systemair fan test rig. The Ex(d) motor is equipped with PTC thermistor for opti-mum motor protection. Max air fl ow 180 000 m3/h.Temperature class T1-T4.

Roof fanEx(d) fl ame proof. Motor speed controllable by frequency inver-ters. Supplied with Ex-classifi ed terminal box pre-installed at the fan casing. Air fl ow up to 44 000 m3/h. Temperature class T1-T4.

AXCBF-EXThe Ex(d) motor of AXCBF-EX

is out of the airstream. Avail-able in sizes from 250 up to 800 mm impeller diameter. AXCBF-EX bifurcated axial fan casings are heavy gauge, hot dip galvanized, with spun

fl anges for high rigidity. Three phase B3 foot mounted motors,

totally enclosed and fan cooled. Max air fl ow 20 000 m3/h.

12

Supply air units• Compact design• Easy to install• Including heating and fi lter

TLP

Compact supply air unit for circular ducting with built in speed controllable fan. Housing made of galvanized sheet metal with a 50 mm acoustic insulation. Circular electrical heater and G3 plane fi lter included. Heater is controlled by a pulser with room temperature or duct sensor (not included). Max air fl ow 1350 m3/h.

TA

Compact supply air unit for circular/rectangular ducting suit-able for supplying air to smaller buildings. The Plug & Play unit is powered by a single inlet centrifugal fan. Electrical or hot water heating battery and a F5 fi lter is included. Housing made from galvanized sheet metal with 50 mm acoustic insulation. Control unit for fan speed and heater is included with the unit. Max air-fl ow 14 000 m3/h (size 6000-14 000 available in December-09). Accessories: Supply air damper, cooling battery.

Heat recovery units• Heat recovery effi ciencies up to 85%• Automatic defrost functions• Large front covers for easy maintenance• Maintenance-free and reliable fan motors• Cross fl ow heat exchanger• Rotating heat exchanger - automatic change normal/summer operation - fl exible installation without conden sation drain

VR DCV and DC are complete air handling units suitable for homes, smaller offi ces and similar premises. With EC-fan motors and a new regulation system the energy use is optimized to be able to meet the new

regulations on energy management. To ensure op-

timal operation, the rotating heat exchanger, supply and extract air fi lter, supply and extract fans, all temperature sensors and the re-heater are monitored. DCV(/B) units are designed for installation on wall, in laundry rooms, utility rooms or similar. With the white painted door and side panels the unit can easily be installed to blend in with the surroundings. Large inspection doors simplifi es inspection and service. The VR 400 DCV/B has a by-pass function which allows the unit to be connected to a kitchen hood. The polluted air from the hood is led directly to the extract fan without coming in contact with the rotating heat exchanger. The DC-units are designed for mounting horizontal on the wall. They are manufactured with 50 mm insulation and are therefore suitable to be installed in cold premises e.g. store rooms, attics or similar. Max air fl ow 550 m3/h.

VR-DCV/DC

VX-EV/E

The VX range is a complete air handling unit suitable for ventilat-ing homes, offi ces and smaller areas in commercial buildings. The cross fl ow heat exchanger are mostly used when there is a strong need to minimize the mixing of supply and extract air. The unit has an automatic defrost function of the cross fl ow heat exchanger. The EV model is suitable for wall mounting and the E model for lying on the side. The E model can also be mounted in cold areas due to the 50 mm of casing insulation. The unit is very easy to operate with the external control panel. Max air fl ow 550 m3/h.

13

VR 300 ECV/B

The VR 300 ECV/B is a very compact unit for ventilation of homes and primarily developed for wall mounted installation but can be installed horizontally e.g. in a false ceiling. The unit is double skinned, fully insulated, equipped EC-fan motors for supply/extract air, rotating heat exchanger, fi lters and thermostat operated re-heater battery. VR 300 ECV/B is equipped with large inspection hatches on both sides and is by that means reversible for optimal and simple duct connections. Max air fl ow 180 m3/h.

Topvex FR

Topvex FR. (Available Febru-ary 2010) Topvex FR03-11 is a series of effi cient ventila-tion units designed for of-fi ces, shops, schools, daycares centre or similar premises.

The units can be installed fl at on the fl oor or suspended in a false ceiling.The units are especially designed to meet the com-ing energy requirements and have therefore a very low energy use and high effi ciency rotating heat exchangers. To simplify the installation and commissioning, the units are included with con-trol system and pre-confi gured. The unique design with double rotating heat exchangers makes the unit very fl at. No need of condense-water drainage makes the unit very fl exible to install. Max air fl ow 4000 m3/h.

Topvex SR/SXTopvex SR/SX is a “Plug and play” air

handling unit with a mo-dern design intended for ventilating offi ces, day-care centres or used as zone ventilation in larger build-ings e.g. schools. To meet the new restricted energy requirements with low SFP (Specifi c Fan Power). Topvex is equipped with

EC fan motors. EC-motors consume an aver-age of 30% less energy than AC motors. In some ap-

plications, the saving can be 50% or more. Topvex SR is equipped with a high effi ciency rotating heat exchanger with an effi ciency of up to 85%. Rotating heat exchangers do not need condense water drainage and is therefore very fl exible to install. Topvex SX with its crossfl ow heat exchanger is normally used where it is a requirement that the supply and exhaust air must be kept separated. The units have an effi cient deicing function.

Topvex TR/TX

Topvex TR/TX is a “Plug and play” air handling unit with a modern design intended for ventilating offi ces, day-care centres or used as zone ventilation in larger buildings e.g. schools. Top-connection of the air-ducts minimize the “Footprint” of the unit. To meet the new restricted energy requirements with low SFP (Specifi c Fan Power) Topvex is equipped with EC fan motors. EC-motors consume an average of 30% less energy than AC mo-tors. In some applications, the saving can be 50% or more. Topvex TR is equipped with a high effi ciency rotating heat ex-changer with an effi ciency of up to 85%. Rotating heat exchang-ers do not need condense water drainage and is therefore very fl exible to install. Topvex TX with its crossfl ow heat exchanger is normally used where it is a requirement that the supply and exhaust air must be kept separated. The units have an effi cient deicing function.

DV

NB

The DV and NB, air handling units (AHU) are highly fl exible AHU’s that can be confi gured to make up the heart of any mechanical ventilation system. The DV comes in a range of 12 different sizes with air volume capacities from 1500 m3/h to 54 000 m3/h, making it possible to always fi nd the unit suiteble for any requirement. The NB comes in a range of 15 different sizes with air volume capacities from 500 m3/h to 87 000 m3/h. Both DV and NB can be confi gured as supply units or as a supply – exhaust units with heat exchanger, either Rotary Heat Exchanger, Plate Heat Exchanger or Run-around Coil Heat Ex-changers.

14

Air curtains and Fan heatersPortier Basic (D)

Possible the most elegant air curtain on the market. For doors up to 2.5 m height, available in white (powder coating) or stain-less steel.

Portier Grand (D)

High performance air curtain for openings up to 3.5 m. For vertical and horizontal mounting. Available in white (powder coating) or stainless steel fi nish.

LG

In new stylish design, LG has for years been Systemair’s best selling air curtain. Available in 12 different versions for doors heights up to 2.5 m.

Portier mini

Combined air curtain and space heater for small opening like kiosk hatches and drive through windows.

Screen Master AS

Designed to prevent loss of cold air and entry of hot contami-nated air, for doors up to 2.5 m.

HD

HF

Powerful air curtain for doors up to 4 m. Avail-able for both vertical and horizontal mounting.

MTV

Air curtain for industrial open-ings up to 5 m. For vertical and horizontal mounting.

FHW

Quiet and highly effi cient stationary fan heater with water-based heating element.

FHC

Stationary water-based fan heater for installation in the ceiling.

Proff

Compact and durable electrical por-table fan heater, 2 - 30 kW.

High performance air curtain for doors up to 3.5 m. For vertical and horizontal mounting.

15

Air distribution products

Sinus AAdjustment of air pattern possible with nozzle diffusers

Sinus CAdjustment of air pattern possible with nozzle diffusers

VVKN-B-Q

VVKR-QCelling swirl diffuser

Sinus DCAdjustment of air pattern possible with nozzle diffusers

Sinus DR

TSOCeiling diffuser

Konika AMulti cone diffuser

KvadraCeiling diffuser

RPKConstant volume regulator

SPI irisControl and adjustment damper

Elegant VTWall mounted diffuser

TFFAdjustable disc valve for supply and exhaust air applications

RFPMounting frame

EFFAdjustable disc valve for supply and exhaust air applications

AJDFlush jet diffuser

16

Syst

emai

r •

Inho

use

stud

io •

Dec

embe

r 20

09 •

Art

nr

E801

5

www.systemair.com