e Provide Consultancy to Make Beautiful...
34
Volume No 10 Issue No 3 December 2016 Pages 34 We Provide Consultancy to Make Beautiful Furniture WE PROVIDE GUIDANCE & EXPERTISE to CONVERT LOGS & LUMBER to SOLID WOOD FURNITURE, PANELS to MODULAR FURNITURE WOOD WASTE to GIFTS & NOVELTIES [email protected] / www.woodconconsultants.com
Transcript of e Provide Consultancy to Make Beautiful...
1
Volume No 10 Issue No 3 December 2016 Pages 34
We Provide Consultancy to
Make Beautiful Furniture
WE PROVIDE GUIDANCE & EXPERTISE
to CONVERT
LOGS & LUMBER to SOLID WOOD FURNITURE, PANELS to MODULAR FURNITURE
WOOD WASTE to GIFTS & NOVELTIES
[email protected] / www.woodconconsultants.com
2
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
3
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
4
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Dubai WoodShow 2017 launches ‘Timber Legality & Climate Change’ ForumDubai WoodShow 2017, in association with the
International Technical Tropical Timber Association
(ATIBT), will organize the Timber Legality & Climate
Change Forum in Dubai from March 4-6, 2017...
MAIN STORY - EXHIBITION PREVIEW COVER STORY
07 Making of Modular Furniture on Small ScaleWhen it comes to produce modular furniture for
a medium size project then the main worry is the
quality, sturdiness and the delivery schedule. Most of
the Interior design firms are making Modular furniture
as per customer designs and they are always in
lookout how they can produce it faster with assured
quality...
14
TECHNOLOGY
GreCon Density Profile Measuring System STENOGRAPH now even more efficient and easier to maintainLast week GreCon had introduced the new raw density
profile measuring system STENOGRAPH at the IWF
2016 fair in Atlanta (USA).
12
................................................................................
................................................................................
MACHINERY
Weinig InTech 2016: Paving the way for the future with W4.0 DigitalThe Weinig Group can look back on another successful InTech,
the company’s traditional in - house trade fair...
08
CONTENTSDECEMBER 2016 - March 2017
Vol. No 10 Issue No 3
................................................................................ ................................................................................
5
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Modern Woodwork Gulf Edition is owned by Aparna Publications, printed & published by Aparna Mansabdar, Aparna Publications 109, R-Square Building, S.No. 116/7/1, Warje, Pune - 411 058, India. Editor - Shanti Mansabdar
Modern Woodwork is a controlled circulation wood technology trade magazine. This magazine shall be published every quarter of the year, barring unforeseen circumstances or a change by prior notice. All rights reserved to the publisher regarding the contents. Any material can be reproduced by other party only by prior permission of the publisher. The information and opinions expressed in articles are those of the author of the concerned article and not necessarily those of Publisher. While every effort shall be made to ensure accurate reproduction, no responsibility can be accepted for the content of articles published or for specific claims made by manufacturers in respect of their products. We present the information for general use. It is possible that it may not be appropriate for readers particular circumstances. We advise our readers to seek specialist advice before acting on the information printed in this magazine. The Publisher does not accept any liability for actual or possible damages caused by use of the information, expressed opinions or implicit error or omissions within the pages of this magazine, no matter whoever caused the said error/s.
Publisher Aparna Mansabdar
Editorial Board S.H.Mansabdar
Dhanashree Bhajekar
Editorial Office Nishigandha
Mangala KatarePriyamvada
Savita Jagtap
Publication Office APARNA PUBLICATIONS
109, R-SQUARE, Survey No. - 116/7/1,Near Mai Mangeshkar Hospital, Warje,
Pune 411058, India
T + 91 20 2523 0060 M + 91 9595009510
E [email protected] [email protected]
W www.modernwoodworkgulfedition.com
WOODWORKING AROUND THE GLOBE
20 - 27
.................................................................................................
CONTENTSDECEMBER 2016 - March 2017
Vol. No 10 Issue No 3
Cadex creates more business opportunities for flooring companies among architect and designers
Introducing Ttbois Expo, The New Exhibition Organized By Cepra and Forum 7
Great success for the 1st International Woodtech Forum organized by MEDEXPO
LIGNA 2017: On track for success
Interzum 2017 Provides Momentum for Designers and Architects
NEWS UPDATES
10
29
28
30
31
PRODUCTS
EGGER Building Products cross the continent
13
.................................................................................................
6
We at Modern Woodwork have a special occasion for celebration in
January 2017 as we have published the first issue of our Gulf Edition in
January 2007 .
Looking back we remember many moments of pride & affinity. Gulf
Edition of Modern Woodwork is the Pioneer - First of its kind - Technical
B2B Publication for Woodworking Industry in all six GCC countries.
Gulf Edition of Modern Woodwork is a business publication founded
by, contributed by and taken to great heights by technical experts in field
of furniture making and woodworking. We are proud to claim that we
still present our readers a unique content which sets us apart from the
design magazines. We have presented several “How to” articles as well
as we regularly pick up and compile technical advances in our visits to
woodworking Expos spanning all over the world. We have earned the
respect and affection of countless friends in Gulf Countries and hence
though we are from India , we genuinely regard Dubai- UAE and all six GCC
countries as our second home.
In course of time we have also evolved and we now send our publication
as a digital newsletter by email to our loyal readers in Gulf countries as well as to overseas Companies which are interested in this part of
world. Still GULF EDITION Modern Woodwork commands the same respect as we have brought global news, views and woodworking
technology, earlier to their desks and now to their PCs and Smartphones.
Current issue: Cover story as article for making Modular Furniture, Pre - view of Dubai Wood Show 2017, the Domotex Asia’s
announcement about CADEX - a reason why architects and interior designers should visit the Show in March, Previews of Ligna/
Interzum Expos, report of a first edition of Expo in Egypt, a great number of bits of technical information from FMC & other Expos - all
these should render the current issue PDF also as a valuable collection worth retaining.
Wishing our readers, advertisers and contributors a very Happy New Year and awaiting their feedback,
Shanti [email protected]
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Modern Woodwork GULF EDITION celebrates 10th Anniversary:
FROM THE EDITOR
Pioneer Wood Technology publication for Dubai - UAE, Qatar, Bahrain, Kuwait , Oman & Saudi Arabia.
7
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
Dubai WoodShow 2017 launches ‘Timber Legality & Climate Change’ Forum
Dubai WoodShow 2017, in association with the International Technical Tropical Timber Association (ATIBT), will
organize the Timber Legality & Climate Change Forum in Dubai from March 4-6, 2017.
The conferencewill be held under the patronage of UAE Ministry of Climate Change & Environment and will discuss the potential of forests, share new technologies and renewable products, exhibit solutions in the timber industry, and call on governments, civil society, and the private sector to promote investment in forests.
Through a memorandum signed with Dubai WoodShow, ATIBT will set up headquarters in Dubai to oversee preparations for the event until its commencement in 2017. Over the last 25 years, ATIBT has been organizing a forum for every two years either in a developing country or an importing country with the aim of promoting the sustainable, ethical and legal trade of tropical timber as a natural and renewable resource.
Dawood Al Shezawi, Chairman, Strategic Marketing & Exhibitions, organizers of Dubai WoodShow says: “Sustainability is the future of this industry. The ATIBT Conference is key for discussing initiatives, which will help the socio-economic development
of timber producing countries.As the Middle East’s leading platform for wood and woodworking machinery, DWS takes pride in hosting this forum,which will be a milestone for the wood industry in the region.”
In recent years, ATIBThas become a key partner for various timber stakeholders as well as European governmental institutions, playing a crucial role in the implementation of international programs.
Al Shezawi added: “We anticipate that the inaugural edition of the conference will attract participation from prominent countries and decision makers in the internal wood industry.”
ATIBT was founded in 1951,prompted by the Food and Agriculture Organization (FAO) of the United Nations and the Organization for Economic Cooperation and Development (OECD).
In 2017, The Dubai WoodShow exhibition is set to acquire a space of 15000 sq. m - larger than its previous edition, and will enable traders,
The three-day conference will be held just before the 12th edition of DWS
manufacturers, suppliers and dealers with ample opportunities to showcase their products, innovative technologies, production scenarios and large-scale machinery.
The strong presence of international wood and woodworking companies, associations and media has continuously provided the show with the newest trade techniques, industry knowledge and innovative technologies. It serves as a highly effective and result-driven platform for leading companies from across the globe to showcase their leading-edge products at an internationally recognized trade fair.
Greatercooperation between the wood industries across different regions will help accelerate the adoption of ethical forest management practices. The Dubai WoodShow, which is the biggest wood industry trade show in the Middle East, will be held from 7th to 9th March, Halls 1 2 3 and 4 at the Dubai World Trade Center.
8
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
MACHINERY
Weinig InTech 2016: Paving the way for the future with W4.0 Digital
The Weinig Group can look
back on another successful
InTech, the company’s
traditional in - house
trade fair. Around 1,000
customers from 32 countries accepted
the invitation to Tauberbischofsheim to
gather information and gain inspiration
for new investments. Weinig presented
its complete range covering the
entire value chain in solid wood
processing over more than 4,000 m2
and underlined its leading position in
Industry 4.0, a key issue for the future,
with W4.0 Digital technologies. A total
of 30 machines and systems were sold
across the group. The order volume
Machine monitoring and predictive
maintenance are further key issues
covered by Weinig, particularly via its
innovative “Service app”. In addition,
in “Millvision”, Weinig provides a high-
performance solution for furniture
production. Group company Holz-
Her offers an attractive concept in
the cutting of panels with the “smart
workshop”. All of these systems
target “maximum transparency of
processes”, as Chief Sales Officer
Gregor Baumbusch explained. The
most important thing, he stressed, is
to “achieve improvements in terms of
costs, availability and resources for
customers while keeping operation as
was significantly higher than the
previous InTech in 2014. At the press
conference on the eve of the in-house
trade fair, CEO Wolfgang Pöschl also
reported on the pleasing growth of the
Weinig Group.
The mix of live demonstrations and
practical information so popular with
our customers once again shaped the
agenda at the 22nd InTech. A central
theme was digitization of production,
for which Weinig has devel-oped an
extensive portfolio of solutions. These
range from “System Plus” for planing
and profiling and “OptiPal” for cutting
to “Fencon” and “master computer
technology” for window production.
9
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
simple as possible.” The
requirements placed on businesses
by Industry 4.0 were illustrated by
Prof. Dr. Hube in his accompanying
presentation, which drew an interested
crowd on every day of the in-house
trade fair. “Data is the fuel of the 21st
century,” stated the economist. He
believes this development applies not
only to components of production
technology but to all processes in the
compa-ny. In the first instance, he
recommended a careful review of the
com-pany’s readiness for the major
challenge before commencing with the
first pilot projects.
Besides the central theme of
“digitization of production”, the
Product Unit Planing and Profiling
was in particular demand from visitors
to InTech 2016. A number of orders
were taken for the Powermat 2400
moulder among other models. The
Weinig “Classic Shop” with its wide
range of pre-owned machines was
also able to secure a gratifying order
tally. The presentations from Weinig
Concept, currently enjoying great
success in the market with complete
system solutions, also drew significant
atten-tion. The numerous innovations
at InTech included the OptiCut S60
wflex+ cutting system for fully-
automated length and width cutting
in a single work stage, the enhanced
ProfiPress T Next Generation gluing
press and four-sided contour milling.
The innovation sees Weinig transfer a
typical processing center application to
a profiling machine. Visitors were also
able to witness complete customer
systems in action including, for the
first time, furniture production on the
Conturex system. Dem-onstration of
complex installations will be made
possible by the integra-tion of the
assembly halls into the exhibition
space. “A great opportunity for
InTech,” underlined Wolfgang Pöschl.
On the eve of InTech, the CEO
joined Chief Sales Officer Gregor
Baum-busch, Chief Financial Officer
Gerald Schmidt and the product unit
directors to answer questions from
30 members of the trade press. One
recurring theme was the company’s
financial figures. Accordingly, the
group expects to achieve a turnover
of €380m for the current year. This
represents an increase of 6% year on
year for the world market leader in
machines and systems for solid wood
and panel processing. “On the whole
pleasing growth, which we currently
expect to continue next year,” said
Wolfgang Pöschl in closing.
10
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
Cadex creates more business opportunities for flooring companies among architect and designers
Design and Architecture
will take centre stage as
highlights of DOMOTEX
a s i a / C H I N A F L O O R
in 2017. cadex, the
international event for connecting,
learning and doing business in the
design and architecture industry will
be hold for the second year and for
the first time as an integrated part of
DOMOTEX asia/CHINAFLOOR inside
W5 and N2 Halls.
cadex will work as collective
University – College of Design &
Innovation to establish Flooring LAB,
a platform to analyze the upcoming
flooring trends and discover new
creative ways of using flooring
materials.Key opinion leaders will hold
forth of a variety of dialogues and they
will also guide tours throughout the
whole Exhibition Center to point out
and explore the most relevant content,
specially tailored for architecture and
design professionals.Once againcadex
will host Materia, the global network in
of architecture and design-related
stimulating content and will generate
two and half days of conferences,
networking events, interactive
activities, creative display and much
more.
cadex will invite design Masters
to explore the most cutting edge and
hottest topics within the industry such
as All-in-one home decoration, retreat
and boutique hotels, smart home,
culture architecture and rebuild. cadex
will cooperate with the ChineseTongji
11
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
the area of innovative materials. In
a total area of 300m2, visitors can get a
closer look tohundreds of outstanding
innovative building materials samples.
In 2016 cadex attracted more than
8000 professional visitors of which
more than 60% were architects and
designers operating in the Chinese
Market and scouting for some
interesting new materials to use in their
projects. The remaining parts of the
visitors included traders, contractors,
real estate developers and leading
industry Media.
“In recent years in Asia Pacific
region, the influence of architects and
designers for buying decisions has
increased. The ability requested to
architecture and design offices to serve
clients more completely have grown in
importance and their specifications or
suggestions are taken very much into
consideration before taking buying
decisions. Furthermore for any project,
the general level ofquality requested
from the final clientconsiderably
raised and therefore the need to
have architects and design expertise
on the ground and more involved
in purchasing decisions became
also imperative. ” says Mr. David
Zhong, President of VNU Exhibitions
Asia, one of the organizers of the
shows. “As a result of these market
changes and the increased need of
our exhibitors to focus more on these
categories of visitors, we decided
to bring together our leading Trade
Show (DOMOTEX asia/CHINAFLOOR)
and a successfulplatform like
cadexto increase the possibilities of
business and give more visibility to
flooring companies also among the
architecture and design Community”
concludes Zhong.
While cadex is building up an
outstanding program for all visitors
and exhibitors DOMOTEX asia/
CHINAFLOOR, as the leading flooring
tradeshow in Asia Pacific, is filling up
its space very fast! With 4 months
remaining before the show opening
on March 21st ,2017, the booked
exhibiting space reached already over
90% of the available fairground.
12
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
TECHNOLOGY
GreCon Density Profile Measuring System STENOGRAPH now even more efficient and easier to maintain
Last week GreCon had introduced the new raw
density profile measuring system STENOGRAPH at
the IWF 2016 fair in Atlanta (USA). The new GreCon
STENOGRAPH can reliably measure the raw density
profile of MDF panels inline from a thickness of 6 mm
up to a thickness of 42 mm. Thanks to an improved software and
a construction that is even easier to maintain, the STENOGRAPH
that is already established in numerous wood based panel plants
is now even more efficient and robust.
The control unit can be installed at a distance from the
production line. A user-friendly touch panel facilitates the
operation of the system. The visualisation of measured data was
adapted to the layout that is typical of GreCon systems which
makes understanding and interpretation much easier.
The STENOGRAPH is working in a non-contact way and is
usually installed at the press outlet where it measures the raw
density profile in only a few seconds. A focused X-ray penetrates
the moving endless panel at an angle of 45° and is measured in
two positions: a stationary detector determines the transmitted
radiation intensity, a moving detector measures the scattered
radiation. The density-dependent values are combined in such
a way that a density value can be allocated to each point of the
panel cross section.
The raw density profile is one of the central material
characteristics of wood based panels. The STENOGRAPH
provides important information for the specific influence of the
characteristics of wood based panels by reliably measuring the
raw density profile.
GreCon - Innovation is our Tradition - Fagus-
GreConGreten GmbH & Co. KG is a privately held
company located in Alfeld/Hanover, Germany. The GreCon
business unit is the market leader in the development and
manufacturing of fire protection systems and measuring
equipment for many types of industries - including the wood-
based panels industry.The Fagus business unit belongs
to the leading suppliers of the footwear industry because
of theworldwide unique combination of design, lasts and
moulds. The Machinery business unit is the market leader
in the production of finger jointing lines and tradesunder the
name WeinigGrecon. All business units operate worldwide
and offer customer support on the job-site. The company
counts more than 600 employees.
13
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
PRODUCTS
EGGER Building Products cross the continent
Between August 2015 and November 2016, the EGGER Truck was once again on the road through Europe. More than 4,200 visitors in 19 countries were shown product and services innovations on 96 events days.
The EGGER Truck has been on the road for the wood-based materials manufacturer since 2011. Over the past year, the 33 tonne EGGER showroom-on-wheels has housed building products and corresponding services. “The EGGER Truck allows us necessary and important mobility for our customer care. We visited more than 90 events and were able to provide solid advice regarding EGGER’s products for wood construction, its services, and innovations”, says Carsten Ritterbach, Head of Marketing and Sales EGGER Building Products. The mobile showroom crossed a total of 19 European countries: from Sweden via Poland, the Czech Republic, Austria, to Ukraine and Turkey. The product presentations for retailers, partners and colleges in the EGGER Truck went smoothly, but the same could not always be said for the 41,800km trip.
The EGGER Truck visited a total of 96 events, where the showroom presented the diverse range of EGGER Building Products with OSB, DHF, and timber. Included on the truck was the EGGER product wall with the entire portfolio and the illustrative environmental cycle. The wood-based materials manufacturer included the EGGER Ergo Board. This versatile
and ergonomic construction board, developed especially for drywall constructions and interiors, expands the range of building products. Thanks to its low weight of 11 kilograms, mounting is easy and fast. Due to its high structural strength and the formaldehyde-free resin, the EGGER Ergo Board is a great wood-based material for interior applications.
The wood-based materials manufacturer also included a new outdoor product: EGGER Thermodecking - a thermo-treated decking board made of sdomestic pine. No chemicals are used for the treatment, just heat, steam, and water. This significantly diminishes vulnerability to insects and fungi, and the life cycle of the boards reaches 15 to 25 years.
The information on offer in the EGGER Truck was complemented with the services from the EGGER Building Products segment. The Planning Handbook contains all important information regarding the planning and use of products as well as the revised Construction Catalogue. The “EGGER Construction Catalogue” app underwent an update and now offers users even more advantages. The app, which is now available in German, English, Italian, Czech, Hungarian, Romanian and Russian, includes all the configurations and construction details from the EGGER Construction Catalogue as 3D renderings. There is also additional information for fire protection and sound and heat insulation.
The EGGER Truck has covered more than 41,000 kilometres on the road through Europe.
The EGGER Truck at one of its numerous tour stops in Ostrava (CZ)
Visitors were informed about EGGER Building Products and corresponding services during various presentations.
14
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
v
We Provide Consultancy to
Make Beautiful Furniture
COVER STORY
AuthorMr. Shanti Mansabdar, a Chartered Engineer, has a vast practical knowledge and 25-year experience in wood-based industries. His wide range of professional experience include production & development of variety of wooden products, from furniture to cabinetry, guitars, wooden tiles, etc.
His firm offers consultancy services for new as well as existing woodworking factories, along with upgrading & re-engineering programs for the woodworking & joinery factories. Low cost automation & elimination of unwanted process & solutions to avoid production loss are key expert services.
The client list of woodworking & joinery factories extends from Dubai-UAE, Qatar, Muscat-Oman, Kuwait, Saudi Arabia to India.
15
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
v
Making of Modular Furniture on Small Scale A practical Guide for Small Scale Furniture Manufacturer and Interior Designers
When it comes to produce modular furniture for a medium size project then the main worry is the quality, sturdiness and the delivery schedule. Most of the Interior design firms are making Modular furniture as per customer designs and they are always in lookout how they can produce it faster with assured quality. They want to have a setup that can meet their requirements. Few of them also need to make the furniture on larger scale as their projects are of larger area spreading on few thousand sq. meters. Hence I have decided to write a series of articles for each of the segments depending on quantity and flexibility. This article will cover making of “Modular Furniture on Small scale”. I will strive to present these articles, which should serve as a practical guide to small, medium and Industrial scale manufacturers.
machines and excellent factory setup.
Ultimately this ends up in to financial
crises. The main reason for this situation
is the attitude towards quality control
and wrong selection of equipment.
The machines are of good quality but
the reasons for this situation are as
mentioned below.
• Wrong selection of machinery
• Balancing of operations.
• Poor maintenance of tooling.
• Lack of precision
• Selection of hardware.
In this article we will consider Making
It is observed that many manufacturers of Modular furniture have set up units with
high-tech machinery available in the market with varying investment budgets. There
are many manufacturers of Modular Furniture and there is a huge competition in the
market in this sector. Unfortunately today many of them are facing the problems of
quality, productivity and uniformity. This is happening in spite of having very good
16
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
COVER STORY
of Modular Furniture on Small Scale for medium batch production. This setup will
need an investment that can range from Half a million to 1 million US$ depending
upon the source of the equipment you choose. In the market machines are available
from Hobby grade to professional to industrial grade. The hobby grade machines /
equipment, if used for longer working hours with heavy load conditions, will lose their
accuracy. Hence we see many users having a couple of burned equipment in their
factory. Hobby equipment are cheaper but if they are used for Industrial application
than that will end up in to work stoppage. For this reason selection of Industrial scale
equipment is suggested for uninterrupted production.
The main operations in making of modular furniture are namely
• Panel cutting,
• Edge banding
• Boring.
We will consider the Basic Industrial Grade Machines required for Small
Scale Furniture Manufacturing.
Panel Cutting
Important criteria’s while selecting the Panel Saw: Panel cutting is done using a panel saw or Beam saw depending up on the no of
sheets to be cut per shift. For a capacity of 30 to 50 sheets sizing per shift, a good
quality-sliding panel saw is fine. One should check that the slides and the sliding
mechanism should be precise and with auto cleaning mechanism. Ball contacts or
roller contacts are suitable for this. We should understand that the slide should be very
precisely machined all along the length of 2.5 / 3 meters. Also the material used in the
slides should be mechanically stable without any movement or deflection in course of
usage. Many times it is seen that the machine works fine when new, but within few
Saw carriage Angular contact
Saw carriage Point contact
The second important point is the
scoring blade and it’s positioning. There
are few types of adjustable scoring
blades available in the market. One
consists of two blades with adjustable
shims to select the thickness of the
scoring grove to match the mail blade
cutting. The second is V grove type; in
this we adjust the width of the cut by
adjusting the depth of the cut. The third
is wobbling cutter block. In this we can
adjust the degree of wobble to mach the
main saw blade cut.
months problems start like chipping and
uneven cutting of panels etc.
17
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Adjustable Scoring blade
Trapezoidal Scoring blade
When the production capacity is
between 50 sheets to 250 sheets per
shift then a Beam Saw is suitable. For
higher production an in line Beam saw
machine is suggested. In this case two
beam saws are placed in line. The first
machine (wider in width) prepares bars of
required width and the second (smaller in
width) cuts the bars in to required length
making it inline production without any
stoppage.
Important points while
using the Panel Saw
Machine effectively:
The sharpening of the main and
scoring blade is also very important.
Many factories have told me that the
cutting is very good when the saw blade
is new but it is not the same when re-
sharpened. This indicates that the
sharpening is not proper. One should inspect the vendor doing this job of sharpening
and the accuracy of his machine and facilities at his workshop. If the blades are
sharpened in house then one should get the machine checked for accurate working.
It is often seen that the carbide tip’s thickness becomes uneven once the blade is re-
sharpened. The height of the blade also changes from tip to tip. This indicates that the
dividing head of the sharpening machine is not set properly or has some problem. In
case of varying height of tips only few carbide tips are cutting and rest are just moving
without cutting. Hence the load is transferred on few tips resulting in poor finish and
bad cut. Same situation also arises in case of main blade re-sharpening.
Many times it is seen that the saw blade is protruding too much causing wobbling
and burnt marks on panel / wood. To avoid this one should see that only tips of the saw
are protruding out of the panel and should set the blade height accordingly.
Last but not the least; the board should be pressed firmly against the machine bed
near the cutting area. This will result in to a smooth cut.
Edge banding
Various types of Edge banding
Important criteria’s while selecting the Machinery:
Edge banding is the second important process in panel Furniture manufacturing.
This is very crucial as it value addition process in the furniture making. It makes the
furniture of high quality or poor quality. Poor quality edge banding makes the furniture
look cheap ending in to price bargains and losses.
Any good edge-banding machine is fine to produce fine quality product. One should
check the following points while selecting the machine. First and foremost is the quality
of the feeding track, it should transport the work piece smoothly till end of the track
without any vibrations and movement.
18
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
COVER STORY
Carriage of edge banding Machine The second factor is the side pressure on the edge that guarantees the thin, uniform
glue line. If this is not good then we will get thick glue line that looks very bad resulting
in a cheap finish.
Side pressure rollers for thin edges
Side pressure rollers for thick edges
The other important factors are
Glue and its temperature. Mostly
good quality imported hot melt
glues are used. One should set the
pot temperature as per specification
of the glue. Any deviation from this
should be avoided.
End cutting is the next
important operations of the edge-
banding machine. The position of
the cut is set with reference to the
edge of the board. This should have
precise adjustment knobs to fine-
tune the end cutting.
Top bottom trimmerTop – bottom trimming is done with
the help of trimmers with copying / tracing wheels that positions the trimmers on the edges. Slight mistake at this stage results in to over trimming or under trimming resulting in to poor finish at the edges. Many times fine dust is sticking on copying wheel resulting in to uneven trimming. Hence periodic cleaning of the copying wheel is necessary.
If one takes care of the points mentioned above then there is no reason why our quality should be inferior to European Furniture.
We can select various options like end rounding, fine trimming, buffing, cleaning, automatic glue feeder, heater at feeding position (pre heat the edge of the board in winter), return conveyer etc. Laser machines are becoming popular because of invisible glue line. Add on laser fittings are also available to upgrade old machines.
Important points while using the Machinery effectively:
Many times we see thicker glue lines or dark glue lines they are due to viscosity of the glue and burnt glue. These are manmade mistakes and can be avoided.
But unfortunately we do not see the same quality of edge banding that we see with Italian or German furniture. This indicates that there is a mistake somewhere. Many times the temperature selected is not correct and due to this glue cannot offer the quality it should.
One should check the sharpness of the saw blades periodically to assure fine cut of the edge band. One should fine-tune the blade position for accurate flush cutting of the edges.
19
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Multi Head Boring machine Single Head Boring machine Important criteria’s while selecting the Machinery:
Boring machineis last and very important operation as the mechanical stability of the furniture is directly depending on the accuracy of the drilling of the holes that accommodate the hardware and fittings of the furniture. One should understand that these machines are called boring machines and not drilling machines. The reason is that very accurate and precise drilling is called boring. Hence Precision is very important in these machines.
CNC Boring Machine CNC Boring Head with multi drills
Boring Machine
One has many options from simple Vertical-horizontal boring machine to Multi head and CNC Boring machines. The accuracy of the boring head is very important in the selection of the machine. Any mistake or compromise in selection of machines will result in to poor product ending up in to rejections and losses.
The machine is provided with guide to drill mirror holes on the opposite side panels to ease the operation. An easy guide is also provided to set the both side fences accurately, this is very important.
The engineering of the machine should be very good and sturdy to assure good results for long time.
Important points while using the Machinery effectively: Most important aspect is the accurate positioning of the work piece. This should be
done with utmost care. Single head machine is fine for smaller batch production. Multi
Contact me for any guidance needed for efforts for full-filling your dreams: [email protected]
Visit us at: www.woodconconsultants.com
head machine is suitable for larger batch
production. CNC machine is suitable for
flexible working, but it needs proper care
and maintenance.
The drills should be re-sharpened
from time to time to get good holes.
I have seen two - three years old CNC
machines in very poor condition due to
use of blunt tooling, cheap panel boards,
poor maintenance.
One should check in to the above
points and plan to produce a product of
International Quality and finish. I have
noticed that if manufacturers are using
good machines, good raw material,
good hardware then there should not be
any problem in producing International
Quality and Finish product. What They
need is the attitude and determination
that’s all.
Photo Courtesy: SCM, BIESSE, GRIGGO
20
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
WOODWORKING AROUND THE GLOBE
WOODWORKING AROUND THE GLOBE
A HOME FURNISHING Wooden Furniture
Chen Furniture Group- the company was
established in Meizhou city, Guangdong
province in 1988. Today, the company is
a specialized furniture manufacturer and
supplier engaged in the domestic and
international sale of furniture.Their dining
and bedroom products have served over
3,000,000 families around world. A
Home has grown into a modern furniture
manufacture with 13,000 employees, 13
manufacture bases, and a floor area of
1350mu including more than 900,000
square meters of plant area in China and
other countries. Domestically, A Home
has opened 3,000+store fronts. They
are also a super supplier for American
furniture Top 1-3. Current products
include panel-type and 100% solid wood
furniture, functional sofas, fabric sofas,
leather sofas, soft beds, mattresses, kits
furniture and the furniture with American
style over 26 catalogs etc.
ATELIER MOKUBAExtraordinary Wooden Table Tops
“Mokuba” is a furniture maker
where using “Extraordinary wood” and
“Extraordinary craftsmen” each piece,
one after another, is made very carefully.
Their vertical milling machine, which
is the biggest of its size in Japan, can be
used on wood up to 6,500mm in length
and 1350mm in width.
The wood Mokuba uses is selected
from sources around the world,
ranging from Yamesugi in Fukuoka,
theirhometown to wood from Africa,
South America, and Europe.This wood,
friendly to forests and local communities,
is managed in a sustainable way.
In forests, which are managed in
a sustainable way, reforestation is
implemented correctly and trees can be
cut with less carbon emissions. To avoid
any waste, theyuse vintage wood and
wood scrapsalso to produce or products.
At Mokuba, wood, with the magical touch
of craftsmen, is reborn in the shape of
new furniture to bring happiness.
A Home furnishing is a leading brand in China. A sister company of Yang
21
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
DOM is a very experienced
manufacturer in the upholstered furniture
field andthey havecooperated with many
qualified manufacturers and suppliers.
Located in Shanghai, the company has
become a high standard benchmark in
the sector due to its manufacturing skills
and quality of the products.
There are three grades of our wooden
DOM FURNITURE Upholstered Furniture
manufacturing modern furniture before
they had established their Shanghai
factory in 2002.With a production
increase, they moved their factory from
Shanghai tocurrent Zhejiang location in
2006.All with a craftsman heart and an
industrial mind, their products are made
by good taste, sensitivity, and elegance.
From the conception to the finishing,
their customers have already enjoyed the
creativity and flexibility of their teams
for the dining furniture, occasional
sets, hospitality furniture and other
accessories.Their philosophy in business
is their commitment to all customers
anddrivesthem to make efforts in
providing competitive products and
quality. These are the two fundamentals
that result in Cecco Home and their
customers both grow and stand together
in business.
CECCO HOMEFurniture
DIGITAL FURNITURE SDN BHD Furniture
Digital Furniture Sdn Bhd,
manufacturer in Malaysia , enjoys more
than 15 years of excellent business
reputation around the world. Their
company is a Malaysia based rubber
wood furniture exporter that specialize
in exporting products ranging from
Bedroom Set, Dining Set, Furniture
components & parts, Rubber wood
laminated board etc.
Nevertheless, quality is never
neglected as top management directly
oversees by the Quality Control Team.
In addition, their products design
and construction a step ahead at an
affordable price as a result of high geared
production efficiency. It involves process
from the preparing of raw materials,
machining of wooden components to
the finishing, assembly and packing of
products.
Presently, their factory area
approximately 150,000 square meter
and has total of 500 employees. Their
products have successfully penetrated
into countries like Europe, US Middle
East, Africa and Asia.
materials at DOM. They use the highest-
grade one wood as the main material of
their products and the two others grades
as the secondary materials. Foam is the
key player of our products.That is the
reason why they insist on using the up
to the standard foam for their products.
DOM is constantly close to the trend of
the pulse of modern furniture design to
manufacture sofas, modular furniture,
armchairs, as well as day beds.
CECCO HOME is based in Taiwan
with more than 10 years experience in
Contact for details : [email protected]
Reach your target market Before the Show, During the
Show & After the ShowFeb 2017
- Exhibition Special issue
OFFICIAL PUBLICATION ► Delhiwood
ExhibitionSpecial Issue:
Free Distribution at Show
22
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
MODERN CO. LTD. Coated MDF Boards
equipment is a Company with research,
development, design, manufacturing,
sales and after-sales services in one
Professional unit.
They have six series products such
as plane painting equipment, automatic
spraying equipment, sanding equipment,
antique drawing equipment and drying
equipment, it includes 20 kinds of
equipment. All the products cover
roller coating, shower coating, spraying
coating and surface coating method.
Absorbed the advanced technology
from the famous coating manufacture in
domestic and overseas, and developed
the new equipment continuously, all of
their products had been used in the field
of new material and coating of various
plates. HuZhou TIGO Machinery Co. has
been rated as, provincial technology of
small and medium-sized enterprises,
quality integrity unit and passed the
ISO 9001 international quality system
certification, AAA security production
enterprises, etc.
HUZHOU TIGO MACHINERY CO.Painting Equipment
JINQIANG LASER CNC EQUIPMENT CO., LTD.Laser Equipment
JQ have manufactured speed laser
engraving and cutting machine, large
format laser equipment, stone laser
engraver, label cutting machine, fabric
laser engraving and cutting machine,
glass laser engraver, metal laser cutting
machine, laser making machine etc.
They are widely used in advertisement,
Arts and crafts, model, carton printing,
electrical appliances, instrument,
decoration, furniture, die-cutting,
Aerospace navigation, kitchen appliance,
electric control box, high-resolute
device, mechanical equipment, electrical
equipment, lighting, posters, auto parts,
display equipment, hardware and metal
processing., etc.
Executed by reliable quality and
perfect sales service system, JQ Laser
products got favorable sale success,
outstanding reputation and popular in
more than 70 countries and areas. Their
products have been sold to a great deal
of countries from the USA, UK, Canada,
Mexico, Australia, Bulgaria, Egypt,
Lebanon, Brazil, Germany, Belgium,
Russia, France, Korea, Singapore, India
to worldwide.
with the Silk Screen Printing, Eco PET
High Glossy & Matt Eco PET laminated
MDF Board with the excellent Mirror
Finish, FF Embo Embossed MDF Board
with the Finishing FOIL. All the boards
are Environment Friendly and are
available in various kinds of designs &
Embossed patterns unique designs of
the silk screen printing & embossing.
The surface is very high scratch
resistance and has Excellent flatness on
the high glossy PET Real 3D Embossed &
touchable surface. UV Embo Embossed
MDF Board with the High Glossy UVare
also available.
MODERN CO. LTD. are the leading,
manufacturing company of the “UV
MDF Board” and “Embossed MDF
Board” in SouthKorea .They supply
them for major kitchen and wardrobe
furnituremanufacturers in the Korean
market and They are now exporting
them to many overseas countries.
HuZhou TIGO Machinery Co.,
Ltd., engaged in the surface coating
MODERN CO.LTD manufactures UV
High Glossy UV coated MDF boards,
SLIK SCREEN UV coated MDF Board
WOODWORKING AROUND THE GLOBE
23
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
SHENYANG YINGJIALANG WOODWORKING MACHINERY CO., LTD.- Sanding equipment
Dating back to the year of 1995, when the furniture trend within China was dominated by solid wood material, NORYA introduced chipboard furniture into the Chinese market. Their products were quickly followed by the young generation and westernized crowd in China, demand increased exponentially and NORYA adjusted itself by quick expansion and categorization of different collections.
From 1997 to 1999, Exponential growth of sales were accomplished with fast expanded number of satellite
stores across all different cities in China.
NORYA became a well-known furniture
company in China, with most consumers
coming from ages between 30 to 45.
In May of 2003, NORYA’s second
factory successfully built and open in
Guangdong. By the end of 2007, NORYA’s
flagship collection, D3 Space, boomed
in sales, triggering expansion to 167
stores in China, on top of exports to over
40 countries across the 5 continents,
including Germany, Italy, Canada,
Australia, England, France, Poland.
NORYA FURNITURE FACTORY Furniture
QINGDAO HUASHUNCHANG WOOD-WORKING MACHINERY MANUFACTURING CO., LTD. - Woodworking Machinery
Qingdao HuaShunchang
Woodworking Machinery Manufacturing
Co., Ltd., founded in 1995 is located in
the international port city of Qingdao. It
is engaged in designing, manufacturing
and selling woodworking board-furniture
completed series equipment, Wood door
production line equipment and customize
furniture completed equipments at
customers’ special request. It is the
first president company of Qingdao
Woodworking Machinery Association,
the first company to gain the patent
for Automatic Edge Banding Machine
in China. After twenty years through
ISO9001 Quality Management System
Certificate, and also won the “Shandong
famous brand”.
After more than 20 years of research
and development and innovation of the
company, it has formed a completely
independent from research and
development and won many-patented
technology. The current leading products:
edge banding machine, panel saw,
series of flat, curved surface sander
device, sanding effect can reach 90%
or more, which make their sanding
equipment become leading sophisticated
ones in the industry. The advantages of
the products are small volume, multi-
function, high cost-effect to occupy
important market in domestic and
overseas.
Shenyang Yingjialang Woodworking
Machine Co., Ltd.is a professional
manufacture enterprise on advanced
machinery, which is a diversified
company, integrates with R & D,
production, sales and export trade. They
have strongly built the “IngaLang” brand.
Export volume of products has accounted
for 80% of the total production, the
products gain consumer confidence in
both domestic and overseas markets..
The company consults the foreign
advanced technology for reference and
combines the “IngaLang” people’ is
Innovation, to research and develop a
(computer) beam saw, CNC Machine,
wood door production line equipment,
and also customize the furniture
completed equipments at customers’
special request. Automatic Edge Banding
Machine is patented products and named
20thcentury Top Ten High-Tech products
of woodworking Machinery Industry in
China.
24
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
the most modern mills in Scandinavia
with large volume capacity.
Their customers are mainly within
the wood industry and building material
merchants in which they not only offer a
high quality solid-wood product but also
supplier concepts. The concept includes,
for example, expert knowledge, efficient
technology and complementary service
solutions within distribution, warehouse
and IT. For building material merchants
they offer One-stop-shop distribution
solution with a well-adapted product
range and high service.
They are working to cut costs
in processing and supply chain from
forest to finished product. With the
latest technology like automatic sorting,
scanning, cutting, finger-jointing and
lamella gluing, they increase both
the share and integration of further
processed wood products in production.
The high quality of slow-grown
northern pine/spruce with its tight growth
rings and unique fibre characteristics
makes it highly suitable for applications
where the wood is visible. The base of
raw materials to SCA Timber’s product
program is supplied from SCA’s own
forest holdings in northern Sweden,
which comprises 2.6 million hectares.
SCA’s forestry operations are certified
in accordance with the standards of the
FSC® (Forest Stewardship Council) and
PEFC™ (Program for the Endorsement of
Forest Certification).
The product program includes for
example, furniture material, solid-wood
flooring material, window material,
doorframes, paneling, cladding, decking/
garden timber and building/construction
timber. Even the byproducts from the
sawmills, sawdust, bark and chips,
gain new application areas as heating
pellets, bio-fuel and as raw material to
new products within the pulp and paper
industry.
SCA TIMBER Suppliers of Wood-Based Products
SCA Timber is one of Europe’s
leading suppliers of wood-based
products, with an annual production
capacity of 2.1 million cubic meters.
The operations include five sawmills in
Sweden, wood-processing units with
planing mills in Sweden, France and
the UK and distribution and wholesale
operations.
The sawmills are strategically
located with direct access to SCA’s forest
holdings and some of them are among
SENYUANHospitality Furniture
Senyuan Furniture is a large-
scale international manufacturer and
distributor of high-end hotel, resort and
luxury large scale residential projects
furniture, specializing in custom design,
millwork (joinery) and loose furniture.
Established in 1994, Senyuan was
founded on the guiding principles of
continuous improvement and growth.
Over the past 20 years Senyuan has
evolved into one of the most established
Asian furniture manufacturers, with an
international reputation for quality and
expertise among exclusive 4 and 5-star
hotel brands such as; Starwood, Hilton,
Intercontinental, Marriott, Four Seasons, Shangri-
La, St. Regis and the Ritz-Carlton. The only furniture
manufacturer to win the Fine Continent Diamond Award
granted by World Hotel Union.
With over 6,000 skilled
employees, 220,000 sq.
meter floor area and three R
& D manufacturing facilities
located in Dongguan,
Shenzhen and Duanzhou,
Senyuan Furniture is truly
committed to investing in
state of the art technology
and innovation. With one of
the largest showrooms in the
industry; architects, interior
designers and premium hotel
brands come from around
the globe to experience the
opulent design and quality of
Senyuan Furniture.
WOODWORKING AROUND THE GLOBE
25
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
UKOMFORT SOFA Sofa Sets
specialized in design and product high-frequency heating equipment, hydromantic and pneumatic equipment, as well as non-standard equipment for metallurgy and food industries. The products are widely used in furniture, man-made boards, floor panels, packing, instrument, hand-crafts, plastics, textile, food, and chemical fields.
They have hands-on skills, state-of-the-art know-how, experienced technical support team, and well-established service network at home and abroad,
We are the leader in terms of range of
products, technology innovation in
the field. Their main products include
high frequency machine, high frequency
board jointing machine, high frequency
precision frame assembly machine,
hydraulic press, high frequency board
jointing and frame assembly machine,
high frequency steam & vacuum timber
dryer machine and a variety of special
high frequency processing equipment.
They can also make custom made
machines according to customer
requirements. They have passed the
ISO9001: 2008 standard certification.
SHIJAZHUANG CANGAO HIGH FREQUENCY MACHINERY CO. - High Frequency Machine
SICHUAN QINGCHENG MACHINERY CO., LTD.Woodworking Machinery
Sichuan Qingcheng Machinery Co., Ltd. is the producer of woodworking machinery and equipment manufacturers,they have the first ISO-9001 international quality system certification. They have developed and produced higher level QMJ woodworking saws monolithic, multi-saw series, QMB four shaver series, QMB sided woodworking planer series, QMX tenon woodworking milling machine series Double End Milling Machine series, woodworking machinery and equipment.
Inorder to further improve product quality and ensure the interests of user, they have purchased the Japan Mazak vertical machining centers, CNC lathes and multifunction Japan MAKINO Japan OKUMA horizontal machining
China, at the Longgang district of the city
of Shenzhen.
They serve important customers
from more than 50 countries all over
the world, ensuring international quality
standard while providing stylish and
comfortable sofas. Their high expertise
UKomfort is modern Chinese
company specialized in the design
of quality sofas. Their models are
manufactured in our 10000 square
meters factory located in the south of
Vietnam, and more than 50 countries
and regions, and has been sold in
Beijing, Shanghai, Kunming, Chengdu,
Dongguan, London, Harbin, Mudanjiang,
Changchun, Shenyang, Dalian, Jinan,
Qingdao, Wuhan, Hangzhou, Chongqing,
Guiyang, Fujian Province, Zhengzhou,
Shijiazhuang, Guangdong, Xinjiang,
Manzhouli, Xi’an.
Shijazhuang CangaoHigh Frequency
Machinery Co. Ltd. (Originally
Shijiazhuang Cangao Huaan Electric &
Electronic Tech Co. Ltd.) is a manufacturer
centers and gantry machining centers,
Mitsubishi laser cutting machines.
Their woodworking machinery has been
exported to Russia, Spain, Germany,
the United States, Argentina, Poland,
Italy, Ukraine, Romania, UAE, Thailand,
in quality leather and
their access to excellent
raw in all kind of styles
guarantees a place for a
UKomfort sofa in every
home or office, whether
traditional or modern,
classis or innovative.
26
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
Threespine is based on our5G®fold down technology.
This technology is regarded as a world standard for installing
floating floors and has been used worldwide in the production
of more than one billion m2 of flooring.
The key feature of Threespine” is the flexible plastic
locking tongue that automatically locks boards or panels
when pushed together. When a panel is pushed into position
(1), the tongue is forced into the tongue groove (2). As the
panel teaches its final position, the tongue snaps out into a
wedge groove and locks the panels (3). The tongue strength
THREE SPINE Quick Assembly
Furniture can now be assembled in
seconds without using any tools, screws,
fasteners or other loose parts. Just click
the parts together for perfectly aligned
and stable furniture. With “Threespine”
Click furniture technology and our
technical support, we provide a solution
that enables our licensees to introduce
a new generation of furniture on the
market.
SODRATimber
Sodra is one of the largest forestry
groups with more than 75 years of
tradition of meeting the most demanding
needs of their clients. Swedish forest
owners jointly own Sodra Group, a 17
billion SEK company . Together their
owners hold nearly 2.4 million hectares
of production forests in Sweden. .
Sodra owns and controls 11 sawmills
in the Nordic countries, with different
specialties and possibilities. Two of these
are specialized in hardwood.
Within Sodra, they leave nothing
to chance. They have researched and
developed improved plant material,
specially adapted for Swedish conditions,
for many years. These enhanced plants
produce better lumber, faster. The
timber they use in production therefore
has good durability properties and the
concentrated geographic supply area
makes the raw material – and thus the
end product – consistent, and of high
quality.
The company Sodra Timber is also
certified and a minimum of 65 per cent of
production is certified according to both
standards.
in combination with the long connection surface achieves an extremely stable locking
in turn makes the furniture very robust. Threespine technology enables furniture to
be completely dismantled. Use the dismantling strip to push the tongue back into the
tongue groove thereby unlocking the panels.
The locking tongues are inserted in the furniture panels during production. This
way we make it easier for everyone to assemble furniture. By simply pushing the panels
together, the furniture will be perfectly stable and square every time.
ZHEJIANG NOTTING HILL HOME FURNISHING PRODUCTS CO. LTD.- Furniture
Notting Hill furniture is Zhejiang
Notting Hill household goods Co., Ltd.
brand, Notting Hill integrate Europe
home culture essence, choose high
quality imported wood, to noble, elegant,
stylish shape, subtle color collocation,
occasionally interspersed pick in the
natural elements, with classic charm and
personality style and vitality. Notting Hill
furniture adheres to market- oriented,
customer-centric; uphold the furniture
art standard idea. Notting Hill furniture
is elegant, affordable; it is no longer
extravagant luxury, good match. Notting
Hill furniture invites friends around world
work together to create a better future.
WOODWORKING AROUND THE GLOBE
27
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
VICHIC HOME Solid Wood Home Furniture
products are various nails, staples,
nailers and staplers.
They have introduced advanced
production lines, and have 10 engineers
and 80 well-trained workers. They have
obtained the ISO9001 and ISO14001
certificates.
From 2003, their products have
been exported to Japan, Korea, USA,
MIDDLE-east countries, South America,
Africa and etc. The products are very
popular in the world market for the fine
quality and favorable prices.They are
also an OEM manufacturer and they
accept OEM orders. They anticipate fine
cooperation with the customers from all
over the world.
WEIFANG WENHE PNEUMATIC TOOLS CO., LTD. - Nails, Staples, Nailers and Staplers
JINAN SAMENG MACHINERY Laser Machines
Jinan Sameng Machinery
Manufacture Co., Ltd. is specialized
manufacturer of laser engraving and
cutting machine, CNC Router, Laser
Marking Machine located in Jinan City,
Shandong province, China. As one of
global leaders in laser industry, we keep
R & D new-tech machine for many fields
such as architectural model, advertising
industry, crafts and arts, educational
institution, laser-marking industry etc.
Sameng Laser Machine gets trust
from new and old clients depending on
stable quality and best after-sale services.
We dedicated to serve our clients with all
of our passion and profession. We are
fashionable, natural and comfortable,
and utilizes its creative spirit to construct
intellectual, open-minded and modern
home-living spaces. We make thoughtful
and elegant furniture and creating soul-
enriching and heart-pleasing home
living. It creates gentleness, elegance
and meaningfulness. Unadorned, but not
unsophisticated Vinchic products.
People are a creator of the art of life,
creating each amazing moment in life, by
the uniqueness of their thoughts. VICHIC,
embarks from the exquisite feminine
sentimentality and understanding of
the soul of home-living, which is the
balanced emphasis on being elegant and
Weifang Wenhe Pneumatic Tools
Co., Ltd is a professional manufacturer
of pneumatic tools. established in 1998,
located at Weifang City . Their main
not only supplier or producer, we are solution provider of laser and CNC Machine, Hope
there is chance to help you grow together in relative industry.
We have 11 years producing experience, and keep R & D new product for market
demand. We have enough parts in stock, if you need parts, we will send it to you within
6 hours.
28
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
Introducing TTBois Expo, The New Exhibition Organized By Cepra and Forum 7
Cepra, the operating
branch of Acimall-Italian
woodworking machinery
and tools manufacturers’
association, is organizing
a new exhibition in a very promising
region, Northern Africa.The first event
of TTBois Expo is planned from 29
June to 2 July 2017, in the premises
of the International Fairgrounds Ofec
in Casablanca (Morocco).Cepra’s
partner for this initiative is Forum7,
a Morocco-based organization with
extensive experience in successful
trade fairs.
“We have been working a lot on
this concept”, says Dario Corbetta,
Acimall director. “According to our
analysis and the data collected during
several missions in the region, the time
is ripe to organize an exhibition that
“supports” the development of wood
and wood-based materials production
in Northern Africa.So we decided to
leverage the expertise acquired in
neighbor countries Tunisia and Algeria.
The exhibition – to be held
concurrently with Simetal 2017,
international exhibition for the metal
working industry – will be part of the
strategic plan for the development
of Morocco’s national industry in the
2014-2020 period, attracting at least
three thousand professional visitors
to Casablanca as well as the leading
international technology vendors.
The exhibition will feature all product
categories,from primary operations
to finishing, from conventional
equipment to coatings and paints,
from complete production lines to
wood and panels, from adhesives to
semifinished materials.
The offer will be rounded off with
meetings, side events and conferences
to create an effective B2B event.
fifty years with Xylexpo, one of the
industry’s leading events on a global
scale, as well as our knowledge of
international industry flows.
We have identified a suitable time
slot, location and political-economic
situation, and a partner – Forum – to
create a new experience, in order to
provide companies that have launched
clear signals with an opportunity to
start or develop their business in all
French-speaking African countries”.
The exhibition will be obviously
open to the manufacturers of
technology and furniture components
from all over the world, to promote the
best European and global technology
in a showcase that will become a
reference for most of the African
continent.Moreover, the wood and
furniture industry in Morocco benefits
from a dynamic business scenario,
with more than 500 significant
companies employing 10 thousand
people, and similar situations in the
The new exhibition dedicated to technology for woodworking and furniture industry components will be held in Casablanca, Morocco, from 29 June to 2 July 2017.
29
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
Great success for the 1st International Woodtech Forum organized by MEDEXPO
Having exceeded the expectations of organizers
and participants alike, the Woodtech Forum that
took place in the city of Damietta in Egypt came
to an end. The Forum, which was organized by
MEDEXPO S.A., in collaboration with the
Chamber of Wood Working and Furniture Industries of the area,
established a channel of communication for the promotion of
human and economic relations.
The high level of the 52 exhibitors and supporters, like
AHEC, EPF, EPLF as well as of important equipment
and panel producing companies, like SCM Group, CEFLA,
FANTONI SPA, HAFELE GmbH was combined with a top
quality panel of speakers coming from the sectors of industry,
high tech, design as well as from institutes of research,
certification and market research, and managed to attract more
than 3000 visitors during the two days of the Forum.
Woodtech Forum attracted professionals from the sectors
of wood, furniture making, materials and wood marketing and
design from the city of Damietta, as well as from Cairo and
Alexandria. The 270 scheduled B2B meetings that were
held reveal the interest in closing business deals, which were
actually materialized in the form of commercial transactions in
all sectors of interest.
The visitors showed great interest in the new panels and
surfaces’ technologies, given that the market of panels is
starting to gain not only ground but also the interest of the
Egyptian consumers. The support of the Chamber of Damietta,
of the governor and of the government, in general, was crucial
in resolving technical problems, while equally important was
the contribution of all members of the Wood and Furniture
Association, who perceived the event as an opportunity to
modernize and improve the production. The investment that is
currently being made for the creation of the Damietta Furniture
City that involves the construction of 2000 furniture plants,
creates expectations for a better future.
The next appointment in Damietta has been set for 2017 and
will be far greater in volume, of better quality and very promising
for exhibitors and visitors alike. Already, many of the exhibitors
who took part in this year’s Woodtech Forum have signed up for
2017 and many more who visited the forum have said that their
participation in the next Wood Tech Forum is a given!
30
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
LIGNA 2017: On track for success - 90 percent of exhibition space already booked
LIGNA, the world’s leading
trade fair for machinery, plant
and tools for the woodworking
and timber processing
industry, is gearing up for its
2017 season (22 to 26 May). 90 percent
of the available exhibition space has been
booked.
“LIGNA is on track for success. We
are well ahead in terms of booked
space,” commented Christian Pfeiffer,
the Director in charge of LIGNA at
Deutsche Messe. “For the upcoming
show we are partnering with the German
Woodworking Machinery Manufacturers’
Association and our regular exhibitors
to develop a new thematic layout that
reflects the changing ways in which
customers of all sizes use woodworking
and timber processing technology. And
I’m pleased to say the initiative has really
paid off.”
The upcoming LIGNA will see smaller
providers showcasing themselves
alongside major players, to the benefit
show will be on intelligent concepts for
integrated manufacturing across all links
in the wood processing chain. LIGNA
2017 will showcase the close interplay
between and ongoing integration of the
virtual and real worlds – across the entire
value chain of the timber processing and
woodworking industries.
Other big highlights at next year’s show
include a comprehensive display of
solutions for processing plastics and
composites, a series of training courses
for joiners, cabinetmakers, carpenters,
assemblers and installers, the Wood
Industry Summit and the “Fibers in
Process@LIGNA” showcase.
Deutsche Messe AG
From its headquarters in Hannover, Germany, Deutsche Messe AG plans and stages leading capital goods trade fairs around the globe. Deutsche Messe is present in more than 100 countries worldwide.
of all concerned. Exhibitor locations
at the show are now based on salient
aspects of technology use, giving rise to
completely new display clusters. Visitors,
in particular, will benefit considerably
from this revamped layout plan, which is
designed to make their visit even more
efficient by giving them quick, convenient
access to the themes that matter most to
them.
Exhibitors have given a resounding
“thumbs up” to the new hall layout
scheme, which in some cases has even
led to exhibitors booking more space
for enlarged presentations. Repeat
exhibitors with a significantly greater
footprint in 2017 include Biesse, Burkle,
Cefla, Felder, IMA, SCM and UNIMAK.
The Wood-Based Panel Production,
Sawmill Technology and Energy from
Wood displays will likewise benefit from
a strong showing of repeat and firsttime
exhibitors, many of them global market
leaders.
The central focus of the upcoming
31
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON D
ECEM
BER
2016
NEWS UPDATES
INTERZUM 2017 Provides Momentum for Designers and Architects
From 16 to 19 May 2017, the next interzum event will present a wide variety of innovations for interior design and furniture manufacturing. As the world’s
largest industry event in these fields, the
fair provides a comprehensive overview
of new technologies and design.
With over 1,500 exhibitors from more
than 60 countries presenting their
innovations, interzum is the industry’s
largest event worldwide. More than
65 % of visitors and exhibitors come
from abroad, making interzum the
most international industry fair. At its
2017 edition, alongside the industry’s
big names, plenty of smaller, highly
innovative companies will again also be
participating. International exhibitors
www.interzum.com, visitors can navigate to the blog, where interesting news about the fair and its exhibitors is provided. “We want to offer an extra service with the blog - and demonstrate how relevant interzum is to creative professionals in the interior design industry”, says Matthias Pollmann, interzum Project Manager at Koelnmesse. “For a few days, everything that represents innovation can be found in one place - in Cologne. The desire for individualised design of living spaces is one of the big trends to have been shaping the furniture industry for years. In the search for scope to create individualised designs, the choice of materials for furniture and interiors plays a decisive role today, and will continue to do so in the future. New materials, machining processes and surfaces are being brought to market within ever shorter development cycles. Alongside their variety, the opportunities to combine these different materials are also growing at an exponential rate, so planners and fabricators gain enormous scope to be creative, which allows them to fulfil the most varied of customer wishes. The only difficulty is keeping track of it all. This is where the Piazzas in the “Materials & Nature” segment becomes invaluable with their comprehensive overview of exhibitors’ highlights and coming trends in this segment.So everything that belongs in a real piazza will also be in place at the fair: culinary treats, the exchange of ideas and certainly one or two business transactions.
will be showcasing an
exciting and extraordinarily
wide-ranging mix of new
technologies, materials
and surfaces. As drivers of
innovation and suppliers of the entire interior design industry they are important partners in the development of new products and design trends. interzum is where tomorrow’s trends are created. “Form follows function” is one of the well-known principles in design and these three words encapsulate the relevance of the furniture and interior construction industries’ supplying sections who, with their new ideas and materials, provide the framework for modern furniture design. This fact also explains why interzum is so popular with architects, designers and interior designers. In order to offer this target group something extra in terms of market orientation and information even while still in the run-up to the event, Koelnmesse has created a news blog. From the homepage at -
32
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
vv
19,262+number of visitsvideo demostech talksinterviews
EDUCATIVEVideos
INFORMATIVE
Articles
NEWS & EVENT
COVERAGE
ADVERTISE & REACH
TH
E G
LO
BAL W
OOD INDUSTRY
www.thewoodportal.comINFORMATION HUB FOR THE GLOBAL WOOD INDUSTRY
www.thewoodportal.com is a one-of-its-kind online publishing platform for woodworking. it offers a nontrade, informational and news sharing platform to readers worldwide at no cost. On The Wood Portal, you will find articles, news, event listing, exclusive event coverage, interviews, video TechTalks, video demos of equipment, etc.
www.thewoodportal.comFor details about advertising with us, write to [email protected]
33
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
vv
Reach your target marketBefore the Show, During the Show & After the Show
01 - 04 March 2017, Greater Noida, India
ExhibitionSpecial Issues:
Free Distribution : 3000 copies-Delhiwood
/ 3000 copies- Mumbaiwood /
Total Copies 46000
RATES TO SUIT ALL BUDGET SIZES ATTRACTIVE DISCOUNT ON BOOKING OF 2 ADVERTISEMENTS
February 2017 issue: Deadline 10th January 2017 - Exhibition Special issue August 2017 issue: Deadline 10th July 2017 - Exhibition Special issue
Contact for details: [email protected] www.modernwoodworkindia.com
1 - 4 March 2017India Expo Center and Mart,Greater Noida, India
International Trade Fair for Furniture Production Technologies, Woodworking Machinery, Tools, Fittings, Accessories, Raw Materials and Products
5th
80% Space Sold Outbook your space today!
LOADING...
Enabling Engagement…Building Business
www.delhi-wood.com
PDA Trade Fairs, A division ofPradeep Deviah & Associates Pvt. Ltd.‘PDA House’, No. 32/2, Spencer Road,Frazer Town, Bangalore - 560 005, India.Tel.:+91-80-4250 5000 Fax: +91-80-2554 2258,E-mail:[email protected]
Principal Official Publication:
Official Publication:
Supported & Endorsed by: Media Partners:
E-media Partners:
Organised by: Supported by:Member of:
For exhibition enquiries,please contact:
Pradeep Kumar G M:+91-99860 66910 E: [email protected] Partha Pran Bhagawati M:+91-99860 61956 E: [email protected] A S M:+91-88844 60153 E: [email protected]
Prin
ted
as o
n 7-
7-20
16
12 - 14 October 2017, Goregaon, Mumbai
34
MOD
ERN
WOO
DWOR
K GU
LF E
DITI
ON S
EPTE
MBE
R 20
16
Contact for Special Packages of [email protected] visit: www.modernwoodworkgulfedition.com
Advertise in all four issues at very reasonable rates. Contact for package offers including advertisements + editorials
RIGHT MEDIA FOR PUBLICITY IN ALL 6 GCC COUNTRIES
REACH TARGET MARKET ACROSS GULF REGION
If your company is interested in marketing your products in Gulf region, Modern Woodwork Gulf Edition should be your perfect choice for media. Our readers read and retain our special issues as permanent reference guides. If you choose to advertise by annual contract, you will reach your target customers in Dubai [ UAE ], Saudi Arabia, Qatar, Kuwait, Oman & Bahrain EVERY THREE MONTHS.
RIGHT MEDIA FOR PUBLICITY IN ALL 6 GCC COUNTRIES
Official GCC Media
Partner
