DXI GRID SC3165 - usg.com · dxi grid - fl edge (cast panel) - main tee elevation scale: 6" = 1'-0"...
7
8 5 4 1 5 4 6 5 4 2 9 3 1 10 12 5 7 1 5 7 9 10 1 7 4 3/8 in [10 mm] 3/8 in [10 mm] Scale: 6" = 1'-0" FULL CEILING PANEL WITH SHADOWLINE ANGLE 4 DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION Scale: 6" = 1'-0" PANEL AND GRID SECTION CUT THROUGH MAIN TEE 2 DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION Scale: 6" = 1'-0" FULL CEILING PANEL WITH WALL ANGLE 1 DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION Scale: 6" = 1'-0" FIELD-CUT GRID WITH SQUARE-CUT PANEL 6 DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION Scale: 6" = 1'-0" PANEL AND GRID SECTION CUT THROUGH CROSS TEE 5 DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION Scale: 6" = 1'-0" FIELD-CUT GRID AND PANEL AT WALL ANGLE 3 DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION 5 7 6 11 2 ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE. 1 2 4 5 6 7 ATTACH WALL ANGLE AT CEILING PERIMETER. ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND. WALL ANGLE. ANGULO PERIMETRAL. PROFILÉ MURALE. TÉE SECONDAIRE. 8 FIELD-CUT CROSS TEE AT WALL ANGLE. COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE. REMOVE CLIP FROM CROSS TEE AT WALL ANGLE. CROSS TEE. CEILING PANEL. PANNEAU POUR PLAFOND. HANGER WIRE BY OTHERS. FIL DE SUSPENTE PAR D´AUTRES. 9 10 SHADOW MOLDING. ANGULO PERIMETRAL. PROFILÉ MURALE. REMOVE CLIP FROM MAIN TEE AT WALL ANGLE. ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE. 12 MAIN TEE. TÉE PRINCIPAL. FIELD-CUT MAIN TEE AT WALL ANGLE. CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL. COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE. SQUARE-CUT PANEL AT PERIMETER. DISCOURS - DÉTAILS DU PLAFOND DE BASE PANNEAU À BORD CARRÉ AU PÉRIMÈTRE. KEYNOTES - BASIC CEILING DETAILS NOTAS - DETALLES BASICOS DE PLAFON FIJAR ANGULO PERIMETRAL AL MURO. ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL. PANEL DE PLAFON. ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS. TEE SECUNDARIA. ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL. TEE PRINCIPAL. AJUSTE EN PLAFON PERIMETRAL. CORTE DE TEE AL ANGULO PERIMETRAL. ADDITIONAL NOTES: 1. NOT FOR CONSTRUCTION. NO APTO PARA CONSTRUCCION. NE PAS UTILISER POUR CONSTRUCTION. 3 11 USG Corporation 550 West Adams Street Chicago, IL 60661 USA WWW.USG.com T. 800-USG4YOU ISSUE RECORD: REV: DATE: SHEETINFORMATION: DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BY ARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHER COMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION AND USE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY AS TECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THE DESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BE PRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES AND BIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OF SUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGN PROFESSIONAL. USG FL EDGE DXI GRID SC3165 00 23/02/2017 01 11/04/2017 USG BASIC GRID DETAILS (NON SEISMIC) DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA) DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
Transcript of DXI GRID SC3165 - usg.com · dxi grid - fl edge (cast panel) - main tee elevation scale: 6" = 1'-0"...
8
5
4
1
5
4
6
5
4
2
93
1
10
12
5
7
1
5
7
9
10
1
7
4
3/8 in
[10 mm]
3/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - FL EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - FL EDGE (CAST PANEL) - CROSS TEE ELEVATION
5
7
6
11
2
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG FL EDGE
DXI GRID
SC3165
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
5
4
1
5
4
6
5
4
2
93
10 5
1
5
9
10
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - FL EDGE (ECLIPSE, HALCYON) - CROSS TEE ELEVATION
5
6
11
2
1
1
127 747
83/8 in
[10 mm]
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG FL EDGE
DXI GRID
SC3166
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
5
4
1
5
4
6
5
4
2
93
1
10 5
1
5
9
10
1
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - FLB EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - FLB EDGE (CAST PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - FLB EDGE (CAST PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - FLB EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - FLB EDGE (CAST PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - FLB EDGE (CAST PANEL) - CROSS TEE ELEVATION
5
6
11
2
127 747
83/8 in
[10 mm]
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG FLB EDGE
DXI GRID
SC3168
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
5
4
1
5
4
6
5
4
2
93
1
10 5
1
5
9
10
1
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - FLB EDGE (MARS, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - FLB EDGE (MARS, MILLENNIA) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - FLB EDGE (MARS, MILLENNIA) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - FLB EDGE (MARS, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - FLB EDGE (MARS, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - FLB EDGE (MARS, MILLENNIA) - CROSS TEE ELEVATION
5
6
11
2
127 747
83/8 in
[10 mm]
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG FLB EDGE
DXI GRID
SC3169
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
5
4
1
5
4
6
5
4
2
93
1
10 5
1
5
12
9
10
1
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - FLB EDGE (WET-FORMED PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - FLB EDGE (WET-FORMED PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - FLB EDGE (WET-FORMED PANEL) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - FLB EDGE (WET-FORMED PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - FLB EDGE (WET-FORMED PANEL) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - FLB EDGE (WET-FORMED PANEL) - CROSS TEE ELEVATION
5
6
11
2
127 747
83/8 in
[10 mm]
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG FLB EDGE
DXI GRID
SC3170
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
5
4
1
5
4
6
5
4
2
93
1
10 5
1
5
9
10
1
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - ILT EDGE (ECLIPSE, MILLENNIA) - CROSS TEE ELEVATION
5
6
11
2
OPTIONAL INSTALLATION: SQUARE-CUT AND
ENCAPSULATE EDGE AT PERIMETER.
PREFERRED INSTALLATION: PROFILE EDGE OF PANEL TO BE SHOWN AT
REVEAL MOLDING. FIELD-CUT AND ROUT EDGE TO MATCH IF NECESSARY.
127 747
83/8 in
[10 mm]
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
SQUARE-CUT PANEL AT PERIMETER.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
PANNEAU À BORD CARRÉ AU PÉRIMÈTRE.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
TEE SECUNDARIA.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
TEE PRINCIPAL.
AJUSTE EN PLAFON PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
3
11
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG ILT EDGE
DXI GRID
SC3171
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
5
4
1
5
4
6
5
4
2
93
1
10 5
1
5
9
10
1
73/8 in
[10 mm]
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH SHADOWLINE ANGLE
4
DXI GRID - PE EDGE (ECLIPSE) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH MAIN TEE
2
DXI GRID - PE EDGE (ECLIPSE) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FULL CEILING PANEL WITH WALL ANGLE
1
DXI GRID - PE EDGE (ECLIPSE) - CROSS TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID WITH SQUARE-CUT PANEL
6
DXI GRID - PE EDGE (ECLIPSE) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
PANEL AND GRID SECTION CUT THROUGH CROSS TEE
5
DXI GRID - PE EDGE (ECLIPSE) - MAIN TEE ELEVATION
Scale: 6" = 1'-0"
FIELD-CUT GRID AND PANEL AT WALL ANGLE
3
DXI GRID - PE EDGE (ECLIPSE) - CROSS TEE ELEVATION
5
6
11
2
127 747
83/8 in
[10 mm]
1
2
4
5
6
7
ATTACH WALL ANGLE AT CEILING PERIMETER.
ATTACHEZ ANGLE MURAL AUX PÉRIMÈTRE DU PLAFOND.WALL ANGLE.ANGULO PERIMETRAL.PROFILÉ MURALE.
TÉE SECONDAIRE.
8FIELD-CUT CROSS TEE AT WALL ANGLE.
COUPEZ LE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
CROSS TEE.
CEILING PANEL.
PANNEAU POUR PLAFOND.HANGER WIRE BY OTHERS.
FIL DE SUSPENTE PAR D´AUTRES.
9
10SHADOW MOLDING.ANGULO PERIMETRAL.PROFILÉ MURALE.
12
MAIN TEE.
TÉE PRINCIPAL.
FIELD-CUT MAIN TEE AT WALL ANGLE.
COUPEZ LE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
DISCOURS - DÉTAILS DU PLAFOND DE BASE
FIELD-CUT EDGE TO MATCH PANEL PROFILE.
DÉCOUPEZ LE BORD DU PANNEAU POUR CORRESPONDRE AU PROFIL.
KEYNOTES - BASIC CEILING DETAILSNOTAS - DETALLES BASICOS DE PLAFON
FIJAR ANGULO PERIMETRAL AL MURO.
PANEL DE PLAFON.
ALAMBRE DE SUSPENSION (COLGANTE) POR OTROS.
AJUSTE DE PLAFON PARA ENCAJAR EN EL ANGULO.
TEE SECUNDARIA.
TEE PRINCIPAL.
CORTE DE TEE PRINCIPAL AL ANGULO PERIMETRAL.
CORTE DE TEE AL ANGULO PERIMETRAL.
ADDITIONAL NOTES:
1. NOT FOR CONSTRUCTION.NO APTO PARA CONSTRUCCION.NE PAS UTILISER POUR CONSTRUCTION.
ENLEVEZ L'ATTACHE DE TÉE SECONDAIRE À LA JONCTION DU PROFILÉ MURALE.
REMOVE CLIP FROM CROSS TEE AT WALL ANGLE.
REMOVE CLIP FROM MAIN TEE AT WALL ANGLE.
ENLEVEZ L'ATTACHE DE TÉE PRINCIPAL À LA JONCTION DU PROFILÉ MURALE.
ELIMINAR EL CLIP DE LA TEE SECUNDARIA AL ANGULO PERIMETRAL.
ELIMINAR EL CLIP DE LA TEE PRINCIPAL AL ANGULO PERIMETRAL.
3
11
USG Corporation
550 West Adams Street
Chicago, IL 60661 USA
WWW.USG.com
T. 800-USG4YOU
ISSUE RECORD:
REV: DATE:
SHEET INFORMATION:
DISCLAIMER: THE USG PRODUCT DETAILS CONTAINED HEREIN ARE INTENDED FOR USE AS PRODUCT REFERENCE MATERIAL BYARCHITECTS, ENGINEERS, OTHER DESIGN PROFESSIONALS, CONTRACTORS, BUILDING CODE OFFICIALS, OR OTHERCOMPETENT CONSTRUCTION INDUSTRY TRADE PROFESSIONALS HAVING AN INTEREST IN THE SELECTION, SPECIFICATION ANDUSE OF PRODUCTS MANUFACTURED BY THE SUBSIDIARIES OF USG CORPORATION. THE DRAWINGS ARE INTENDED SOLELY ASTECHNICAL SUPPORT INCIDENT TO THE SALE AND USE OF USG PRODUCTS AND NOT INTENDED TO BE A SUBSTITUTE FOR THEDESIGN REVIEW AND APPROVAL OF THE LICENSED DESIGN PROFESSIONALS FOR THE PROJECT. THESE MATERIALS MAY BEPRINTED AND/OR TRANSFERRED ELECTRONICALLY SOLELY AS NEEDED BY THE USER. BECAUSE CAD ELECTRONIC FILES ANDBIM (BUILDING INFORMATION MODELING ) FILES CAN BE MODIFIED BY OTHER PARTIES, WITHOUT NOTICE OR INDICATION OFSUCH MODIFICATIONS, MODIFICATION OF USG PRODUCT CAD DRAWINGS IS THE SOLE RESPONSIBILITY OF THE DESIGNPROFESSIONAL.
USG PE EDGE
DXI GRID
SC3172
00 23/02/201701 11/04/2017
USG BASIC GRID DETAILS (NON SEISMIC)
DETALLES BASICOS DEL SISTEMA DE SUSPENSION (SIN RESISTENCIA SISMICA)
DÉTAILS DE GRILLE DE PLAFOND DE BASE (SYSTÈME NON SISMIQUE)
