Duray - Amazon S3 · A1286-8 U1286-8 2-86W SSB/T8/HO 8 1200 Series HO, VHO ElectronicT8 & T12/SSB...
Transcript of Duray - Amazon S3 · A1286-8 U1286-8 2-86W SSB/T8/HO 8 1200 Series HO, VHO ElectronicT8 & T12/SSB...
2010
DurayFluorescent Manufacturing Company
Lighting your waySINCE 1946
Pages 1-6
Pages 7-20
Pages 21-30
Pages 31-50
Pages 51-60
Pages 61-74
Pages 75-94
Industrial Series
Utility Series
Surface Series
Strips Series
Task Series
Recessed Series
Designer Series
Pages 95-107
Energy Saver Series
Industrial Series Pages 1-6
1200 11300 2
1400 31600 41800 5
1800-T8 6
DF Series: Extruded Aluminum Outdoor Lite 7-8Adjustable Flood 9
Environ-All Wet Location 10Fortress 11
Weather-All Damp Location 12Clean-Ray 13
Turret 14Wall Washer 15
HIT 16Hi-Bay 6-lamp 17
Hi-Bay T5 18Vandal Resistant 19
Icetron® Surface Mount 20
Utility Series Pages 7-20
Prisma Ray 21Econo-Ray Wraparound 22
ECW/XECW 23Cloudlume Acrylic Forms 24
Econo-Cloud 25Plexilume 26
Narrow-Lume 27HIF 28
Direct/Indirect 29Parab-Ray 30
Surface Series Pages 21-30
Utility-T8 31Utility—Slimline 32
Utility—HO, VHO 33
Utility Side Mounted 34Duraleer Parallel 35
Add-O-Leer Continuous Run 36
Add-O-Leer Continuous Run Side Mounted 37Staggered Strip—One Lamp 38Staggered Strip– Two Lamp 39
Narrow Staggered Strip 40Narrow Channel Strip 41
NTS– T8 & T5 42
Midget Series 43Midget High Performance 44
Midget Side Mount 45
Midget Top Mount 46Midget Biax® 47
Mini Side Mount Series 48
Reflector Options 49Accessories 50
Strips 31-50
Spec D Lite 51NUC 52
Little “D” Lite 53Deluxe “D” Lite 54
Task “D” Lite 55Solid Front Task—T5 56
Task Big “D” Lite 57
Prewired Little “D” Lite 58
GLI Series 60
JXUC Series 59
Task 51-60
Comforay 75Décor-Ray 76
Square-Deelite 77Directoray 78
Big “D” Directoray 79
Acrylic Round I 80Acrylic Round II 81
Acrylic Square 83Circline 84
Cloudlume Wall Bracket 85
More-Lite 86Big “D” Highliter 87
Hanover 88
Coralume 89Deco-Lume 90
Chrome Bracket 91
Stilite 92-94
Low Profile Round 82
Designer 75-94
Duralume Premium Lay-In 61-62Shallolume Lay-In 63
Narrow-Lume Lay-In 64
Shallolume Flange-Type 65-66Narrow-Lume Flange 67
Parab-Ray 68Recessed Multi-Spot / Flood 69
Genesis 70
Recessed Industrial 71HIF 72
Options & Accessories 73
Recessed 61-74
Quick Reference Guide Options & Accessories 95
73-74
Comforay 75Décor-Ray 76
Square-Deelite 77Directoray 78
Big “D” Directoray 79
Acrylic Round I 80Acrylic Round II 81
Acrylic Square 83Circline 84
Cloudlume Wall Bracket 85
More-Lite 86Big “D” Highliter 87
Hanover 88
Coralume 89Deco-Lume 90
Chrome Bracket 91
Stilite 92-94
Low Profile Round 82
Designer 75-94
Duralume Premium Lay-In 61-62Shallolume Lay-In 63
Narrow-Lume Lay-In 64
Shallolume Flange-Type 65-66Narrow-Lume Flange 67
Parab-Ray 68Recessed Multi-Spot / Flood 69
Genesis 70
Recessed Industrial 71HIF 72
Options & Accessories 73
Recessed 61-74
Quick Reference Guide Options & Accessories 95
Energy Saver Series
Wraparound
Cloud
Strips
UC
Square Wrap
Cloud 2
Acrylic Round
Reflector
Pre-Wired
Value Ray
Shallolume
Comforay 75Décor-Ray 76
Square-Deelite 77Directoray 78
Big “D” Directoray 79
Acrylic Round I 80Acrylic Round II 81
Acrylic Square 83Circline 84
Cloudlume Wall Bracket 85
More-Lite 86Big “D” Highliter 87
Hanover 88
Coralume 89Deco-Lume 90
Chrome Bracket 91
Stilite 92-94
Low Profile Round 82
Designer 75-94
Duralume Premium Lay-In 61-62Shallolume Lay-In 63
Narrow-Lume Lay-In 64
Shallolume Flange-Type 65-66Narrow-Lume Flange 67
Parab-Ray 68Recessed Multi-Spot / Flood 69
Genesis 70
Recessed Industrial 71HIF 72
Options & Accessories 73
Recessed 61-74
Quick Reference Guide Options & Accessories 95
Genesis
Comforay 75Décor-Ray 76
Square-Deelite 77Directoray 78
Big “D” Directoray 79
Acrylic Round I 80Acrylic Round II 81
Acrylic Square 83Circline 84
Cloudlume Wall Bracket 85
More-Lite 86Big “D” Highliter 87
Hanover 88
Coralume 89Deco-Lume 90
Chrome Bracket 91
Stilite 92-94
Low Profile Round 82
Designer 75-94
Duralume Premium Lay-In 61-62Shallolume Lay-In 63
Narrow-Lume Lay-In 64
Shallolume Flange-Type 65-66Narrow-Lume Flange 67
Parab-Ray 68Recessed Multi-Spot / Flood 69
Genesis 70
Recessed Industrial 71HIF 72
Options & Accessories 73
Recessed 61-74
Quick Reference Guide Options & Accessories 95
95-107
96
97
98
99
100
101
102
103
104
105
106
107
108
MODEL # WHITE ENAMEL REFELCTORSolid
MODEL # WHITE ENAMEL REFELCTORUplight
NUMBEROF LAMPS
BALLAST TYPE NOMINALLENGTH IN FEET
A1248-8-S U1248-8-S 2-60W SSB/T12 4
A1272-S --------- 2-55W SSB/T12 6
A1272-8-S --------- 2-85W SSB/T12 6
A1196-8-S U1196-8-S 1-105W SSB/T12 8
A1196-8T-S U1196-8T-S 2-105W SSB/T12 16
A1296-S U1296-S 2-75W SSB/T12 8
A1296-8-S U1296-8-S 2-105W SSB/T12 8
A1196-15-S U1196-15-S 1-215W SSB/T12 8
MODEL # WHITE ENAMEL
REFELCTORSolid
MODEL # WHITE ENAMEL
REFELCTORUplight
NUMBER OF LAMPS
BALLAST TYPE NOMINALLENGTH IN FEET
A1159 U1159 1-59W SSB/T8 8A1259 U1259 2-59W SSB/T8 8A1244-8 U1244-8 2-44W SSB/T8/HO 4A1286-8 U1286-8 2-86W SSB/T8/HO 8
1200 Series HO, VHOElectronicT8 & T12/SSB
Industrial
T8 Electronic
SPECIFICATIONS:
HOUSING: Channel die formed of code gauge steel. Dual purpose end act as coupler for continuous row mounting. All chassis components snap into place without screws in most models.
REFLECTOR: One piece, die formed and cross-ribbed for added rigidity. 10% uplight optional.
FINISH: Housing and reflector baked at 375º in hi-reflective white enamel.
ELECTRICAL: All units with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W. label.
11"
SLIMLINE, HIGH OUTPUT MODELS
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
8/08
6”
11”
4¼”
T12 Electronic
1
1300 Series T5, T5HO, T8
Inustrial
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410
Please Note: Specifications subject to change without notice.
ORDERING INFORMATION: Example Q13232
Specifications
Housing: Channel die formed of code gauge steel. Dual-purposeend plates act as coupler for continuous row mounting. All chassis components snap into place without screws.
Reflector: white enamel reflector 48” long, die formed and cross-ribbed for added rigidity. 10% uplite is optional. Only one fastener secures reflector; other side slides into position.
Electrical: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Othervoltages available. Ballasts mounted in direct contact withhousing for maximum heat dissipation. Sockets completely wired.
Installation: Units may be surface or pendant mounted,individually or in continuous rows.
Labels: U/L combined with I.B.E.W.
Series:
Q13- Closed Refl. 4’T13- Closed Refl. 2’ U13- Uplight Refl. 4’
Numberof lamps Lamp
14 - 2', T5, 14 watt28 - 4', T5, 28 watt
24 - 2', T5HO, 24 watt54 - 4', T5HO, 54 watt
17 - 2', T8, 17 watt32 - 4', T8, 32 watt
Options
B1 - Battery pack HLO (prefix) - High lumen output ballast (for 4’ T8 only)T-TandemWG11 - 11” wire guard
T12 available as a special order.
-
1 - One2 - Two3- Three
9/08
2
MODEL # WHITE ENAMEL
REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTORUplight
NUMBER OF LAMPS
BALLAST TYPE NOMINALLENGTH IN FEET
Q140232 U140232 2-32W SSB/T8 4 Q140232T U140232T 4-32W SSB/T8 8 Q140332 U140332 3-32W SSB/T8 4 Q140332T U140332T 6-32W SSBT8 8 Q140432 U140432 4-32W SSB/T8 4 Q140432T U140432T 8-32W SSB/T8 8
1400 Series T8 Electronic
Industrial
T8 Electronic
*T indicates tandem.
OPTIONS & ACCESSORIESCode DescriptionB1 Battery PackHLO (suffix) High lumen output ballast (for 4' T8 only)WG13 13" wire guard
Prefix catalog number with SR when ordering fixture with aluminum reflector.Consult factory for reflector specifications.
Specifications subject to change without notice.
SPECIFICATIONSHOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as a coupler for continuous row mounting. Socket plates snap into place without screws.
REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches.
FINISH: Housing and reflector treated with a rust inhibitor in a five stage process prior to electrostatic finish at 375º in baked white enamel. Provides minimum reflectance of 90%.
ELECTRCAL: All units wi red with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W. label.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
3
MODELNUMBER
White Enamel Reflector
Solid
MODELNUMBER
White Enamel Reflector
15% Uplight
NO. OF LAMPS
BALASTTYPE
NOMINALLENGTH IN
FEET
Q16232 U16232 2-32W SSB/T8 4Q16232T U16232T 4-32W SSB/T8 8Q16332 U16332 3-32W SSB/T8 4Q16332T U16332T 6-32W SSB/T8 8Q16432 U16432 4-32W SSB/T8 4Q16432T U16432T 8-32W SSB/T8 8
1600 Series Electronic T8/SSB
Industrial
T8 Electronic
*T indicates Tandem
OPTIONSCode DescriptionB1 Battery PackF FusingHLO (suffix) High Lumen output (for 4' T8 only)WG13 13" wire guard
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as coupler for continuous row mounting. Socket plates snap into place without screws.
REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an ironphosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 375ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Turret sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or incontinuous rows.
LABELS: U/L combined with I.B.E.W. label.
6/08
4
MODEL # WHITE ENAMEL
REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTORUplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINALLENGTH IN FEET
A1882-S U1882-S 2-75W SSB/T12 8 A1884-S U1884-S 4-75W SSB/T12 8 A1842-8-S U1842-8-S 2-60W SSB/T12 4 A1882-8-S U1882-8-S 2-105W SSB/T12 8 A1842-15-S U1842-15-S 2-110W SSB/T12 4 A1882-15-S U1882-15-S 2-215W SSB/T12 8
1800 Series Slimline, HO, VHOElectronicT12/SSB
Industrial
OPTIONS & ACCESSORIESCode DescriptionF Fusing
WG13 13" wire guard
SPECIFICATIONS
HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. D ual purpose end plates act as a coupler for continuous row mounting. Socket plates snap into place without screws.
REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches.
FINISH: All metal parts are cleansed by a multi-stage process and treated with aniron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 375ºF. Minimum of 88% reflectivity.
ELECTRCAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Turret sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or incontinuous rows.
LABELS: U/L combined with I.B.E.W. label.
48" & 96" K.O. PLANS
Specifications subject to change without notice.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
T12 Electronic
5
1800 Series - T8 T8/Electronic
Industrial
MODEL # WHITE ENAMEL REFELCTORSolid
MODEL # WHITE ENAMEL REFELCTORUplight
TEMP NUMBEROFLAMPS
BALLAST TYPE
NOMINALLENGTH
A18259 U18259 32° 2-59W SSB/T8 8'A18459 U18459 32° 4-59W SSB/T8 8'……... U18244-8 0° 2-44W SSB/T8 HO 4'A18286-8 U18286-8 0° 2-86W SSB/T8 HO 8'A18486-8 U18486-8 0° 4-86W SSB/T8 HO 8'
Note: Other lamp and ballast configurations available. Consult factory for details.
OPTIONS & ACCESSORIESCode DescriptionF FusingWG13 13" wire guard
SPECIFICATIONS
HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as a coupler for continuous row mounting. Socket plates snap into place without screws.
REFLECTOR: 48” long, die formed, cross-ribbed and doubleembossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 375ºF. Minimum of 90% reflectivity.
ELECTRCAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing formaximum heat dissipation. Turret sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W. label.
48" & 96" K.O. PLANS
Specifications subject to change without notice.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
6
DF SeriesExtruded Aluminum Outdoor Lite
HO/VHO
Utility
SPECIFICATIONS
HOUSING: Unit body of extruded aluminum. End plate and splice box of die cast aluminum. Splice box cover of aluminum with cork and neoprene gaskets provide weatherproof access to wiring. All mounting hardware is made of rustproof stainlesssteel.
SHIELDING: Clear heavy gauge acrylic plastic diffuse slides in and out for ease in re-lamping, yet provides weather-proof seal.
INSTALLATION: Unit may be mounted individually or in continuous rows, flush to buildings and billboards, or extended on conduit. Splice box provides 360º rotation of fixture and is threaded to accept ¾” conduit.
FINISH: All aluminum surfaces anodized to resist corrosion. Inside surfaces of housing electrostatic painted baked white enamel with 86% minimum reflectance.
ELECTRICAL: All units wired with UL approved –20º outdoor weatherproof ballasts for remote locations, for 110-120 volt, 60 cycle AC operation. Other voltages and ratings supplied upon request. Lampholders are weatherproof telescoping recessed double contact type.
LABELS: U/L listed combined with I.B.E.W.
MODELNUMBER
NUMBEROF
LAMPS
BALLASTTYPE
DIMENSIONS
L W DDF1148-8 1-60W 800MA-HO 52-3/8" 5-3/4" 3-3/16"
DF1172-8 1-85W 800MA-HO 76-3/8" 5-3/4" 3-3/16"
DF1196-8 1-105W 800MA-HO 100-3/8" 5-3/4" 3-3/16"
DF1172-8T 2-85W 800MA-HO 151" 5-3/4" 3-3/16"
DF1196-8T 2-105W 800MA-HO 199" 5-3/4" 3-3/16"
DF1148-15 1-110W 1500MA-VHO-SHO-T12 52-3/8" 5-3/4" 3-3/16"
DF1172-15 1-160W 1500MA-VHO-SHO-T12 76-3/8" 5-3/4" 3-3/16"
DF1196-15 1-215W 1500MA-VHO-SHO-T12 100-3/8" 5-3/4" 3-3/16"
DF1172-15T 2-160W 1500MA-VHO-SHO-T12 151" 5-3/4" 3-3/16"
DF1196-15T 2-215W 1500MA-VHO-SHO-T12 199" 5-3/4" 3-3/16"
T ( tandem) indicates 2 attached housings with 1 ballast. If housings are separated, additional DFSB (splice box) is required.Option:W - 277 volt*Weatherproof 277 volt ballast available for 6', & 8' 2 light HO fixtures as well as VHO fixtures. Non-weatherproof 277 volt remote ballast available for all above.
PROPRIETARY NOTEExcept for uses expressly granted in writing, information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Specify row lengths when ordering.
7
32
1
SADDLE STRAP ANCHOREDTO COPING (BY OTHERS).
ROOF
MOUNTING ARM (BY OTHERS)
¾" PIPE-CONDUIT
DF SeriesExtruded Aluminum Outdoor Lite
Typical InstallationsLuminaire Spacing & Mounting
Utility
4
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
CONDUIT STRAP(BY OTHERS) CONDUIT MOUNTING SUPPORT & LOCKING
BRACKET (BY OTHERS).
Mounting as viewed from rear of billboard or poster panel.
TWO LAMP BALLAST TO SUPPLY
BUILDING MOUNTING
BILLBOARD MOUNTING
1. No. 3 should not exceed dimensions of No. 1.2. No. 2 should be twice the dimensions as No. 1.3. If No. 2 exceeds 15 ft., luminaires should be installed at top and bottom of area to be illuminated.4. Angle of No. 4 should be 45° if dimensions are as outlined in paragraph No. 2. If No. 1 is four times less than No. 2 then angle 4 should be 22.5°
LUMINAIRE SPACING & MOUNTING
8
Adjustable Flood Series T5, T5HO, T8
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410
Please Note: Specifications subject to change without notice.
ORDERING INFORMATION: Example DF214-W
SpecificationsHOUSING: Unit body of extruded aluminum. End plate and splice box of die cast aluminum with cork and neoprene gaskets provide weatherproof access wiring. All mounting hardware of rustproof stainless steel.
SHIELDING: Clear heavy gauge acrylic plastic diffuser slides in and out for ease in re-lamping, yet provides weatherproof seal.
ELECTRICAL: All units incorporate an electronic ballast. 120 volts AC, 60 Hz standard, Class "P" thermal protection, and Class "A" sound rating. Integral ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be mounted, individually or in continuous rows, flush or extended on conduit. Splice box provides 360° rotation of fixture and is threaded to accept ¾"diameter conduit.
FINISH: All aluminum surfaces anodized to resist corrosion.Inside surfaces of housing electrostatic painted baked white enamel. Custom colors available, consult factory.
LABELS: U/L listed and I.B.E.W.
Please note:
*Other options, lamp and ballast configurations available, consult factory.
*Specify indoor or outdoor application when ordering.
Series:DF - Adjustable Flood
Numberof lamps
Lamp14 - 2', T5, 14 watt21 - 3', T5, 21 watt28 - 4', T5, 28 watt
24 - 2', T5HO, 24 watt39 - 3', T5HO, 39 watt54 - 4', T5HO, 54 watt
17 - 2', T8, 17 watt25 - 3', T8, 25 watt32 - 4', T8, 32 watt
OptionsF - FusingRM - Remote mounted ballast (indoor)T - TandemW - 277 volt
-
1 - One2 - Two
LampA B C
2' 25-9/16" 28-7/16" 30-7/16"
3' 37-9/16" 40-7/16" 42-7/16"
4' 49-9/16" 52-7/16" 54-7/16"
6' 72-9/16" 74-7/16" 76-7/16"
8' 96-9/16" 98-7/16" 100-7/16"
Fixture Lengths
3.5"
5.75"
*T ( tandem) indicates 2 attached housings with 1 bal-last. If housings are separated, additional DFSB (splice box) is required.
9/08
9
MODELNUMBER
NUMBEROFLAMPS
TEMP BALLAST TYPE NOMINALLENGTH
MH248-8-S 2-60W -20° SSB/T12 52"
MH296-S 2-75W 50° SSB/T12 102”
MH296-8-S 2-110W -20° SSB/T12/HO 102”
Environ-AllWet Location Series
HPF,SlimlineElectronic T12/T8/T5/SSB
Utility
T8 Electronic
OPTIONS & ACCESSORIES
Code Description
POLY Polycarbonate lens
MODELNUMBER
NUMBEROFLAMPS
TEMP BALLAST TYPE NOMINALLENGTH
MH117 1-17W 0° SSB/T8 26"
MH217 2-17W 0° SSB/T8 26"
MH132 1-32W 0° SSB/T8 52"
MH232 2-32W 0° SSB/T8 52"
MH332 3-32W 0° SSB/T8 52"
MH132T 2-32W 0° SSB/T8 102"
MH232T 4-32W 0° SSB/T8 102"
MH244-8 2-44W 0° SSB/T8/HO 52"
MH286-8 2-86W 0° SSB/T8/HO 102"
MH332T 6-32W 0° SSB/T8 102"
MH259* 2-59W 32° SSB/T8 102”
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
SPECIFICATIONS
HOUSING: White polyester fiberglass; con-tinuously gasketed channel for a positive wa-tertight seal with diffuser.
DIFFUSER: 85% acrylic/15% DR crepe pat-tern diffuser provides a smooth exterior sur-face for easy cleaning. Celcon plastic latches secure diffuser to housing.
OPTIONAL DIFFUSERS: polycarbonate.
OPTIONAL LATCHES: Polycarbonate; tam-perproof polycarbonate or Celcon.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection.
INSTALLATION: Units may be surface or pendant mounted.
LABELS: U/L and I.B.E.W.
T12 Electronic
* 0° Starting temperature available upon request.For –20º starting temperature, consult factory.
MODELNUMBER
NUMBEROFLAMPS
TEMP BALLAST TYPE NOMINALLENGTH
MH228 2-28W 0º SSB/T5 52”
MH254 2-54W 0º SSB/T5/HO 52”
10
Fortress Series T8, T5, T5HO
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: White polyester fiberglass;continuously gasketed channel for a positivewatertight seal with diffuser.
DIFFUSER: Clear polycarbonate ribbed pattern or (optional) prismatic diffuser.
LATCHES: Clear polycarbonate.
ELECTRICAL: All units wired with ballastsincorporating Class P thermal protection.
INSTALLATION: Units may be surface orpendant mounted.
LABELS: U/L and I.B.E.W.
10/03
ORDERING INFORMATION: Example FRT2432T8
Specifications subject to change without notice.
Series
FRT
No. of Lamps Nom. Length Lamp Wattage14 - 14W, 2', T517 - 17W, 2', T824 - 24W, 2', T5HO
32 - 32W, 4', T828 - 28W, 4', T554 - 54W, 4', T5HO
2 - 2'4 - 4'
FRT
1 - One Lamp2 - Two lamps
Lamp Type
One Lamp Two LampD 4.13" 4.13"W1 4" 6.77"W2 4.56" 7.33"
2' 4'L 27.64" 51.65"MP(mounting points)
19.69" 43.31"
T8T5T5HO
W1
W2 W1
W2
DD
MP
L
11
Weather-All SeriesDamp Location
ElectronicT8 & T12/SSB
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SPECIFICATIONS
HOUSING: Unit housing die formed of high grade code gauge aluminum for maximum rigidity and uniformity. Gasketed end plates provide weather and moisture resistant seal.
SHIELDING: Clear extruded acrylic snap-out plastic diffuser providesweatherproof shielding. Snaps out for ease in re-lamping.
FINISH: All metal surfaces double baked white enamel over aluminum with 88% minimum reflectance. WILL NOT RUST.
ELECTRICAL: All units wired with ballasts incorporating Class P thermalprotection, for 120 volt, 60 cycle AC. Other voltages available.
INSTALLATION: Outdoors, units may be stem mounted or flush, individually or in continuous rows. Gasketed joiner band available for continuous row runs.Indoor installations require 2½” spacers. For continuous row installations, specify number of fixtures per row.
LABELS: Damp location combined with U/L and I.B.E.W.
Model Number Number of Ballast Type Min Temp. Nominal
OL1140RSCW-S 1-40W SSB/T12 0º 4'
OL1117CW 1-17W SSB/T8 0º 2’
OL1125CW 1-25W SSB/T8 0º 3’
OL1148-8-S 1-60W SSB/T12 -20º 4’
OL1148-8T-S 2-60W† SSB/T12 -20º 8’
OL1172-8-S 1-85W SSB/T12 -20º 6’
OL1172-8T-S 2-85W* SSB/T12 -20º 12’
OL1196-8-S 1-105W SSB/T12 -20º 8’
OL1196-8T-S 2-105W** SSB/T12 -20º 16’
OL1148-15-S 1-110W SSB/T12 -20º 4’
OL1196-15-S 1-110W SSB/T12 -20º 8’
OL1132CW 1-32W SSB/T8 0° 4’
*Tandem in 2-6' sections **Tandem in 2-8' sections †Tandem in 1-8’ section
Options: OLJB– joiner band for continuous row.
6/08
12
Clean-Ray Series Slimline, High OutputElectronic T8 & T12/ SSB
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
6/08
Clear Dished Acrylic
Number of Lamps
Temp. Ballast Type Length In Inches
DTC232 2-32 W 0° SSB/T8 50"DTC232T 4-32W 0° SSB/T8 98"DTC244-8 2-44 W 0° SSB/T8/HO 50"DTC248-8-S 2-60 W -20° SSB/T12 50"DTC286-8 2-86 W 0° SSB/T8/HO 98"DTC296-S 2-75 W 50° SSB/T12 98"DTC296-8-S 2-110 W -20° SSB/T12 98"DTC432 4-32 W 0° SSB/T8 50"
SPECIFICATIONS
HOUSING: Entire construction rigidly die formed of code gauge prime steel. Housing rim that diffuser flange rests upon is gasketed withpolyurethane material. This seals the channel protecting it from moisture, dust, dirt and other fore ign matter.
SHIELDING: Vacuum formed diffuser of virgin clear acrylic which Is held securely against the gasketing with knurled nuts.
FINISH: All metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 375°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available.Ballasts mounted in direct contact with cover for maximum heat dissipation.Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: Damp Location combined with U/L and I.B.E.W.
2¾"
5-1/8"
3¾"6-1/8"
13
Turret Series Slimline, HO,VHOElectronic T8 & T12/SSB
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
6/08
SPECIFICATIONS
HOUSING: Channel and 4 ft. covers of code gauge die-formed steelconstruction. All Channels reinforced by ribbing the entire length for extrarigidity. Dual purpose end plate acts as a coupler for continuous row mounting.Socket plates snap into housing without screws.
FINISH: All painted metal parts are treated with a rust-inhibitor and baked at 320° F with high-reflective white enamel to provide minimum reflectance of 88%.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Sockets completely wired.
INSTALLATION: May be surface, pendant, slide hanger or chain mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
MODELNUMBER
NUMBERof LAMPS
BALLASTTYPE
NOMINALLENGTH
S248-S 2-38W SSB/T12 4'S272-S 2-54W SSB/T12 6'S296-S 2-75W SSB/T12 8'S496-S 4-75W SSB/T12 8'S248-8-S 2-60W SSB/T12 4'S272-8-S 2-85W SSB/T12 6'S296-8-S 2-105W SSB/T12 8'S296-15-S 2-215W SSB/T12 8'
MODELNUMBER
NUMBERof LAMPS
BALLASTTYPE
NOMINALLENGTH
S332 3-32W SSB/T8 4'S332T 6-32W SSB/T8 8'S432 4-32W SSB/T8 4'S286-8 2-86W SSB/T8/ HO 8'
(4’ housing) (8’ housing)
T12 Electronic
T8 Electronic
14
Wall Washer Series T5, T5HO, T8, T8HO
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses directly granted in writing, information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co.Specifications subject to change without notice.
ORDERING INFORMATION: Example WWE432-W
SpecificationsHOUSING: Code gauge sheet metal die formed and welded construction.
REFLECTOR: Die formed aluminum sheet subs tratewith silver based polyester film laminate.
ELECTRICAL: Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard (other voltages available). Class "A" sound rating. Ballasts mounted in direct contact with housing for maximum head dissipation. Sockets completely wired. Accepts ½"diameter conduit, 7/8" outside diameter.
INSTALLATION: Units may be wall mounted, individually or in continuous rows.
FINISH: Detergent cleaned with iron phosphate and chromic acid rus t inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375°F. Custom colors available, consult factory.
LABELS: U/L listed and I.B.E.W.
OTHER: Accessories rated for 120 volt use.
*Other options, lamp and ballast configurations available, consult factory.
Series:WWE - Wall Washer
Numberof lamps
Lamp Type
28 - 4', T5, 28 watt54 - 4', T5HO, 54 watt32 - 4' T8, 32 watt44 - 4' T8HO, 44 watt
Options
B1 - Battery PackF - Fusing
-
1 - One2 - Two
9/08
15
HIT SeriesUtility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity.Dual purpose end plates act as coupler for continuous row mounting. Socket plates snap into place without screws.
OPTIONAL REFL ECTOR: Solid top 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastenswithout tools to channel by two captive turn latches.Silver enhancement reflector also available, consult factory for specifications.
FINISH: All metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 375ºF. Minimum of 90% reflectivity.
ELECTRICAL: All units wired with ballastsincorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W. label.
10/08
ORDERING INFORMATION: Example HITS 214
Specifications subject to change without notice.
SeriesHIT - High Intensity Turret
OptionalReflector*
No. of Lamps Lamp Type
14 - 14W, 2', T521 - 21W, 3',T528 - 28W, 4', T5
24 - 24W, T5HO 39 - 39W, T5HO54 - 54W, T5HO
2 - two lamps3 - three lamps4 - four lamps
HIT
S - Solid Reflector U - Uplight ReflectorX - Silver Enhancer
Options & Accessories
2B - Dual level switchingF - fusingT - Tandem: 8' housing
Shown with optional ribbed reflector
-
*For 4’ fixtures only.
16
Hi-Bay 6-Lamp Series T8/T5, T5 HO
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Die-formed heavy-gauge cold rolled steel,pre-painted white.
FINISH: Reflector is 87% reflectance aluminum.
BALLAST ACCESS: Ballasts are accessible by removal of reflector, fastened with eight screws.
BALLASTS: Designed for use with Class P electronic ballasts
MOUNTING: Fixtures designed for surface, pendant, stem or chain hanging. Can be installed in tandem configurations.
LABELS: U/L and I.B.E.W.
Specifications subject to change without notice.
MODEL NUMBER LAMP TYPE LENGTH
UHB632 6-32WT8 48”
UHB654 6-54WT5/HO 48”
UHB628 6-28WT5 48”
10/08
Fixture on left shown with optional perfora-tions for uplight.
Options:1. Prefix model number with a “P” for optional uplight (perforated ).2. Optional dual level switching, suffix model number with –2B.
17
Hi-Bay T5 T5, T5HO
Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Die-formed heavy gauge cold rolled steel.
FINISH: Reflector is Miro 4™ 95% reflectance anodized aluminum. Housing is pre-painted white.
BALLAST ACCESS: Ballasts are accessible by removal of reflector, fastened with eight screws.
BALLASTS: Designed for use with Class P electronic ballasts for T5 lamps.
LAMPHOLDERS: G5 push-through sockets completelywired.
MOUNTING: Fixtures designed for surface, pendant, stem or chain hanging. Can be installed in tandem configurations .
WIREGUARDS (optional): Combination 6 and 9 ga. Wire (A.W.G. Standard) with white powder-coat finish.Attaches with clips for easy lamp access.
LABELS: U/L and I.B.E.W.
Specifications subject to change without notice.
MODEL NUMBER LAMP TYPE LENGTH
UHB328 3-28WT5 48”
UHB428 4-28WT5 48”
UHB354 3-54WT5HO 48”
UHB454 4-54WT5HO 48”
Hi-Bay End View
6/08
Shown with optional wireguard.Options (add to end of catalog number):-2B: dual level switching-WG12: 12 inch wire guard (CF)
18
Vandal Resistant Series Electronic T8/SSB
Utility
SPECIFICATIONS:
HOUSING: Channel and cover are heavy gauge steel.
SHIELDING: Polycarbonate prismatic diffuser for soft andeven glare-free illumination.
ENDS: Fastened with (3) tamperproof screws.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesion and rust resistance.
ELECTRICAL: All units wired with "A" sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
(8) 3/16” DIA KO
(2) 7/8” DIA KOBACK
(2) 3/16” DIA WIDE by 3/8” LONG KO
(4) 5/16” DIA KOGround KO
1-1/8”
Catalog Number Lamp BallastType
NominalLength
VRH6117 1-17W T8/SSB 24-1/4”
VR6225 2-25W T8/SSB 36-1/4”VR6232 2-32W T8/SSB 48-1/4”
VRH6217 2-17W T8/SSB 24-1/4”
VR6125 1-25W T8/SSB 36-1/4”VR6132 1-32W T8/SSB 48-1/4”
4-1/2”
2-5/8” 4-3/8”
4-1/2”
SIDE
ENDDIFFUSER
19
Icetron® Surface Mount Utility
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Ballast & Lamps
Icetron
Featuring
• 10 times longer life than fluorescent• Suitable for cold temperature operation (-40°)• Universal voltage• High luminous efficacy• Virtually eliminates lamp flicker• Quiet operation• Reduced maintenance costs• 100,000 hour lamp life extends relamping cycles
Dimensional Data
8"
Drop Lens
11.15"
16"
2½"
10/08
20
Prisma Ray T12 & T8/Electronic
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
MODELNUMBER
NUMBEROF LAMPS
BALLASTTYPE
NOMINALLENGTHIN FEET
NOMINALWIDTH IN INCHES
N240-S 2-40W T12/SSB 4’ 15-13/16”
N440-S 4-40W T12/SSB 4’ 15-13/16”
SPECIFICATIONSHOUSING: Entire construction rigidly die formed of code gauge steel in 2’, 3’, 4’ and 8’ lengths.
SHIELDING: Single piece light stabilized prismatic lens in virgin acrylic.5/32” convex hexagon prisms on bottom optically engineered for controlled low brightness. Linear striations on sides designed to refract light upward while adding to overall attractiveness and streamlined appearance. Hinged along its entire length on both sides for maximum flexibility. Destaticized to inhibit dirt accumulation.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt , 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTAL LATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
NH132 1-32W T8/SSB 4’ 5½”
N132T 2-32W T8/SSB 8’ 5½”
NH232 2-32W T8/SSB 4’ 5½”
NH217 2-17W T8/SSB 2’ 11¼”
N225 2-25W T8/SSB 3’ 11¼”N232 2-32W T8/SSB 4’ 11¼”
N232-15” 2-32W T8/SSB 4’ 15-13/16”
N232T¹ 4-32W T8/SSB 8’ 11¼”
N259 2-59W T8/SSB 8’ 11¼”
N417 4-17W T8/SSB 2’ 15-13/16”
N432 4-32W T8/SSB 4’ 15-13/16”
N432T² 8-32W T8/SSB 8’ 15-13/16”
¹2 lamps in cross section.²4 lamps in cross section.
Model Number Description
F Fusing
W 277 volt
SR (prefix) Enhancement reflector
Options & Accessories
5-5/8”
4-5/8”
2½”
6/08
T12 Electronic
T8 Electronic
MODEL NUM-BER
NUMBEROF LAMPS
BALLASTTYPE
NOMINALLENGTHIN FEET
NOMINALWIDTH IN INCHES
21
6¼"
3-3/16"
4-5/8"
9-3/16"
4" 10" 8-7/8" KO 4"
48"
24"
12" 2-7/8" KO
Econo-Ray Wraparound Electronic T8 & T12/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
6/08
SPECIFICATIONS
HOUSING: Entire construction rigidly die formed of code gauge steel with deep rib-reinforcing formations assuring accuratealignment and sturdy installation
SHIELDING: Single piece light stabilized prismatic lens in virgin acrylic. 5/32” convex hexagon prisms on bottom opticallyengineered for controlled low brightness. Linear striations on sides designed to refract light upward while adding to overall attractiveness and streamlined appearance. Hinged along its entire length on both sides for maximum flexibility. Destaticized to inhibit dirt accumulation.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostaticallysprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
ModelNumber
Numberof Lamps
BallastType
NominalLength in
Feet
NominalWidth in inches
NNH217 2-17W SSB/T8 2 9-3/16
NN232 2-32W SSB/T8 4 9-3/16
NN240-S 2-40W SSB/T12 4 9-3/16
Other lamp and ballast options available. Please consult factory.
22
ECW/XECW Series T8/Electronic
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specification subject to change without notice.
CATALOGNo.
NUMBER of LAMPS
BALLASTTYPE
NOMINALLENGTH
ECW132 1-32W T8/SSB 4’
ECW132T 2-32W Tandem T8/SSB 8’
ECW232 2-32W T8/SSB 4’
ECW232T 4-32W Tandem T8/SSB 8’
ECW332 3-32W T8/SSB 4’
ECW332T 6-32W Tandem T8/SSB 8’
Specifications
HOUSING: Completely die formed from heavy gauge code grade or optional code gauge cold rolled steel. The housing shape and flanges provide structural stability. End plates are embossed and screwed securely to the housing. Wireway covers are screwed down. Optical reflectors are attached with quarter turn fasteners for easy access. Knockouts are provided on fixture back, with additional flush style knockouts on the ends.
SHIELDING: Single piece prismatic lenses in virgin acrylic. Linearprisms on the sides and convex hexagon prisms on the bottom optically engineered for controlled low brightness, glare-free diffusedlight.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F.
ELECTRICAL: All electrical components are U.L. listed. Standard ballasts are high efficiency T8 electronic. Optional ballasts available.Standard voltage on all fixtures is 120V 60Hz AC. Other voltages available.
LABELS: U/L and I.B.E.W.
CATALOGNo.
NUMBER of LAMPS
BALLASTTYPE
NOMINALLENGTH
XECW132 1-32W T8/SSB 4’
XECW132T 2-32W Tandem T8/SSB 8’
XECW232 2-32W T8/SSB 4’
XECW232T 4-32W Tandem T8/SSB 8’
Enhancement Reflector
OPTICALREFLECTORALUMINUMOR SILVER
06/08
23
6”
Cloudlume Acrylic Forms Electronic T8/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
6/08
SPECIFICATIONS
HOUSING: Body is die-formed of code gauge steel construction and designed for maximum strength and uniformity. Standard in stock modules are 1’x4’, 2’x2’, 2’x4’.
SHIELDING: Lenses are formed white acrylic.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired w ith ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted individually.
LABELS: U/L and I.B.E.W.
Model No.NumberOf Lamps
BallastType
NominalWidth andLength
WPC14232 2-32W SSB/T8 15" x 51¼"
WPC22232U 2-32WU* SSB/T8 27" x 27¼"
WPC24232 2-32W SSB/T8 27" x 51¼"
WPC24432 4-32W SSB/T8 27" x 51¼"
Options:B1—Emergency battery pack
1 x 4
2 x 4
2 x 2
23-7/8”
*Sockets set for 6” leg spacing.Aluminum housing available on special order.
24
Econo-Cloud Series ElectronicT8/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
6/08
SPECIFICATIONS:
HOUSING: Body is die-formed of code gauge steel construction and designed for maximum strength and uniformity.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhes ionand rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
SHIELDING: Lenses are formed white acrylic.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendent mountedindividually.
LABELS: U/L combined with I.B.E.W.
Options:B1—emergency battery pack
Aluminum housing available on special order.
A
C
B
12-3/4"
48"
2-1/4" K.O.5/8" K.O.
7/8" K.O.
5-1/4"
5"19" 1-3/4"
48"
7-1/4"
6"
7/8" K.O.
CATALOGNO.
NO.LAMPS
LAMPTYPE
BALLASTTYPE
Dimensions
A B CWPC232 2 32W SSB/T8 11¾” 52" 4¾"
WPC432 4 32W SSB/T8 17" 52" 4¾"
25
Plexilume ElectronicT12 & T8/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Body and hinged door frame are die-formedof code gauge steel construction and designed formaximum strength and uniformity.
FINISH: All metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 320°F. Minimum of 90% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heatdissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendantmounted, individually or in continuous rows.
LABELS: U/L listed and I.B.E.W.
09/08
Specifications subject to change without notice.
Series:
S—PlexilumeSeries
SH—Use “SH” when HPF (high power factor) is desired on 20 watt
Nominal Dimensions L x W
12—1’ x 2’14—1’ x 4’22—2’ x 2’24—2’ x 4’44—4’ x 4’
Number of Lamps Wattage
17—17 watt, T8/SSB2—20 watt, T1232—32 watt, T8/SSB32U—32 watt u-lamp4– 40 watt, T124U—40 watt u-lamp, T124BX– 40 watt biax
Tandem
T– Tandem2—two3– three4—four6– six8—eight
Louver Options
For lens and louver op-tions, see accompany-ing page.
ORDERING INFORMATION: Example S24432
2light
3light
4light
6light
8light
Tan-dem
1x2 x x
2x2 x x X X
1x4 x X X X
2x4 x x X X
4x4 X X
Product Configurator
Note: Prefix catalog number with SR when ordering fixture with enhancement reflector.
2x22x4
1’ x 2’1’ x 4’1’ x 8’
4’ x 4’
26
T8 ELECTRONIC
Narrow-Lume Series ElectronicT8/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
6/08
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: See ordering information.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with “A” sound rated ballasts incorporating Class P thermal protec tion for 120 volt, 60 cycle AC current. Other voltages available. Ballastsmounted in direct contact with housing for maximum heatdissipation. Sockets completely wired and mounted.
INSTALLATION: Units may be surface or pendantmounted, individually or in continuous rows.
LABELS: U/L and I.B.E.W.
ModelNumber
Numberof Lamps
BallastType
Nominal Length in Feet
SNH12117 1-17W SSB/T8 2’
SNH12217 2-17W SSB/T8 2’
SN13125 1-25W SSB/T8 3’
SN13225 2-25W SSB/T8 3’
SN14132 1-32W SSB/T8 4’
SN14232 2-32W SSB/T8 4’
SN14232T 4-32W SSB/T8 8’
To Order the Following Diffusers Add to Catalog Number
Plastics Louvers
Silver White
Prismatic Acrylic #12 Pattern APrismatic Acrylic #12 Pattern .125 PMatte White Acrylic MWASpecular Parabolic Louver ½"x½"x½" SP1Specular Parabolic Louver ¾"x¾"x½" SP4Specular Parabolic Louver 1½"x1½"x1" SP2White Cubed Acrylic Louver½"x½"x3/8"
PLA
Parallel Blade Aluminum Louver ¾" deep x 2" spacing
PBMA
Available on special order:1. Uplight2. Wall mounting3. Custom colors4. Other lamp and ballast combinations available, consult factory.
Ballast OptionsBX39—39 watt biax ballastBX40—40 watt biax ballast
5¾”
½”Accessories
SS Single canopy
ST Stems—specify length: 6” - 48”. Example: catalog number for a 12” stem is ST12.
27
HIF Series T5 Twin Tube
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Body and hinged door frame are die-formed code gauge steel construction anddesigned for maximum strength and uniformity.
ELECTRICAL: All units wired with ballastsincorporating class “P” thermal protection, 120volts AC, 60 Hz standard (other voltagesavailable), and class “A” sound rating. Ballasts mounted in direct contact with housing formaximum heat dissipation. Sockets completely wired and mounted.
INSTALLATION: Units may be surface orpendant mounted.
FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistantpowder urethane polyester coating, electrostaticapplied and baked at 375° F. White enamelstandard. Custom colors available, consultfactory.
LABELS: U/L and I.B.E.W.
*Other lamp and ballast configurations available, consult factory.
10/08
Specifications subject to change without notice.
ORDERING INFORMATION: Example HIF240—W
HIF
Series
HIF
No. of Lamps2 - Two lamps4 - Four lamps
Lamp Type40 - 2’, T5TT, 40 watt55 - 2’, T5TT, 55 watt
Options
B1—Battery PackF—FusingRM—Remote mounted ballastW—277 volts
-
3.50
28
Direct/Indirect Series T8, T5, T5HO
Pendant
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Code gauge perforated steel sheet metal die formed and riveted construction.
ELECTRICAL: Electronic ballast incorporating Class “P” thermal protection. 120 volts AC 60 Hz standard. Class “A” sound rating. Ballasts mounted in direct contact with housing for maximum heat dissipation. Socketcompletely wired.
INSTALLATION: Chain link, aircraft cable or other suitable suspension hardware (by others).
FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powderurethane polyester
LABELS: U/L and I.B.E.W.
10/08
ORDERING INFORMATION: Example DIR232-F
Specifications subject to change without notice.
40 - 2’, T5TT, 40W54 - 2’, T5TT, 54W28 - 4’, T5, 28W54 - 4’, T5HO, 54W105 - 4’, T5TT, 105W32 - 4’, T8, 32W
Series
DIR
No. of Lamps Lamp Type
DIR
1 - One Lamp2 - Two lamps
Options
B1—Battery PackF—FusingY—Radio Interference filterZ—Plug-in wiring
14.25
48.18
4.25
29
Parab-Ray Surface Electronic T8, SSB/Biax
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
10/08
SPECIFICATIONS
CONSTRUCTION: Housing to be constructed of code gauge die formed cold rolled steel structurally embossed for rigidity. Wire way covers to be snap-in type requiring no tools or fasteners for attachment or removal. Louver section to be fabricated of aluminum and to consist of a cellular assembly of inter connecting wedge-shaped baffles.
ELECTRICAL: All electrical devices to beUnderwriters Laboratories listed. Ballasts areClass P for 120 volt operation unless otherwise specified. Ballasts and lamp holders to bereplaceable without removing fixture from ceiling.
FINISH: All painted metal parts to be chemically treated with a rust resistant phosphatized solution.Finish coating of reflecting surfaces of housing to be white, non-modified, acrylic enamel electrostatically applied and cured at 300°F, with a minimum reflectance factor of 88%. Louvers are to be plated with anodized semi-specularaluminum finish.
Catalog Number Size Cells Ballast LampDesignation
SDCP14232-8 1x4 8 SSB/T8 2-32W
SDCP22232U-9 2x2 9 SSB/T8 2-32W U6
SDCP22317-9 2x2 9 SSB/T8 3-17W
SDCP22340-9 2×2 9 SSB/BX 3-40W
SDCP24332-18 2x4 18 SSB/T8 3-32W
SDCP24432-32 2x4 32 SSB/T8 4-32W
OPTIONS: B1= Emergency Ballast 2B = Two ballastsC= 10% Harmonics W= 277 voltOther ballast and lamp combinations available. Please consult factory.
2x4
24" (2x4)
3"
24" (2x4)
24" (2x2)
12" (1x4)
6"
2x2
1x4
30
MODELNO.
No. OF LAMPS
TEMP BALLAST TYPE NOM.LENGTH
H1259 2-59 watt 32° SSB/T8 8’
H1459 4-59 watt 32° SSB/T8 8'
S1244-8 2-44 watt 0° SSB/T8/HO 4’
S1255-8 2-55 watt 0° SSB/T8/HO 5’
S1265-8 2-65 watt 0° SSB/T8/HO 6’
S1186-8 1-86 watt 0° SSB/T8/HO 8’
S1286-8 2-86 watt 0° SSB/T8/HO 8’
S1486-8 4-86 watt 0° SSB/T8/HO 8’
MODELNO.
No. OF LAMPS
TEMP BALLAST TYPE NOM.LENGTH
H1159 1-59 watt 32° SSB/T8 8’
H1159T 2-59 watt 32° SSB/T8 16’
S1144-8 1-44 watt 0° SSB/T8/HO 4’
S1155-8 1-55 watt 0° SSB/T8/HO 5’
S1165-8 1-65 watt 0º SSB/T8/HO 6’
S1186-8 1-86 watt 0° SSB/T8/HO 8’
S1186-8T 2-86 watt 0° SSB/T8/HO 16’
HOUSING: Channel and cover is of code gauge die formed steel. Deeper size channels, as used for 800 MA and 1500 MA fixtures, are reinforced with ribs, running the entire length. Dual purpose plates act as coupler for continu-ous row mounting. Socket plates snap into housing without screws.
FINISH: All painted metal parts are treated with a rust-inhibitor and baked at 375ºF in a hi-reflective white enamel to provide minimum reflectance factor of 88%.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available.
INSTALLATION: May be surface, pendant, slide hanger or chain mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company 2050 West Balmoral Avenue Chicago, Il 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Above illustration shown with optional asymmetric reflector.
6/08
Model No. Asymmetric
No. of Lamps
Nom.Length
A48 1 or 2 4’
A72 1 or 2 6’
A96 1 or 2 8’
Reflectors for above
*To special order with aluminum housing, prefix catalog number with "AL".Dimensions may vary.
Specifications
Utility Series T8 Electronic
Strips
1-15/16”
1
31
Utility Series SlimlineElectronicT12/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
MODELNO.
No. OF LAMPS
TEMP BALLAST TYPE NOMINALLENGTH
H 1272-S 2-55 W 50° SSB/T12 6'
H 1472-S 4-55 W 50° SSB/T12 6'
H 1196-S 1-75 W 0° SSB/T12 8'
H 1196T-S 2-75 W 50° SSB/T12 16'
H 1296-S 2-75 W 50° SSB/T12 8'
H 1496-S 4-75 W 50° SSB/T12 8'
Ordering Information
SPECIFICATIONS
HOUSING: Channel and cover is of code gauge die formed steel.Dual purpose plates act as coupler for continuous row mounting.Socket plates snap into housing without screws.
FINISH: All painted metal parts are treated with a rust-inhibitor and baked at 375ºF in a hi-reflective white enamel to provide minimum reflectance factor of 90%.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available.
INSTALLATION: May be surface, pendant, slide hanger or chain mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
*T denotes tandem.
06/08
32
Utility Series HO, VHO,ElectronicT12/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications
HOUSING: Channel and cover is of code gauge die formed steel. Deeper size channels, as used for 800 MA and 1500 MA fixtures, are reinforced with ribs, running the entire length. Dual purpose plates act as coupler for continuous row mounting. Socket plates snap into housing without screws.
FINISH: All painted metal parts are treated with a rust-inhibitor and bakedat 375ºF in a hi-reflective white enamel to provide minimum reflectance factor of 88%.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available.
INSTALLATION: May be surface, pendant, slide hanger or chainmounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
Specifications subject to change without notice.
3 Lamp Unit 4 Lamp Unit
*T denotes tandem. 48"
5"
1-13/16”
1
Ordering Information
MODELNO.
No. OFLAMPS
TEMP BALLAST TYPE (T12 Lamp)
NOMINALLENGTH
S1124-8-S 1-35W -20 SSB/T12/HO 2’S1224-8--S 2-35W -20 SSB/T12/HO 2’S1136-8-S 1-50W -20 SSB/T12/HO 3’S1236-8-S 2-50W -20 SSB/T12/HO 3’S1148-8-S 1-60W -20 SSB/T12/HO 4’S1248-8-S 2-60W -20 SSB/T12/HO 4’S1448-8-S 4-60W -20 SSB/T12/HO 4’S1172-8-S 1-85W -20 SSB/T12/HO 6’S1172-8T-S 2-85W -20 SSB/T12/HO 12’S1272-8-S 2-85W -20 SSB/T12/HO 6’S1472-8-S 4-85W -20 SSB/T12/HO 6’S1196-8-S 1-110W -20 SSB/T12/HO 8’S1196-8T-S 2-110W -20 SSB/T12/HO 16’S1296-8-S 2-110W -20 SSB/T12/HO 8’S1496-8-S 4-110W -20 SSB/T12/HO 8’S1148-15-S 1-110W -20 SSB/T12/VHO 4’S1172-15-S 1-160W -20 SSB/T12/ VHO 6’S1196-15-S 1-215W -20 SSB/T12/ VHO 8’
06/08
Optional Reflectors Model No.
AsymmetricNo. of Lamps
Nom.Lengthin Feet
A24 1 or 2 2
A36 1 or 2 3
A48 1 or 2 4
33
Utility Side Mounted Series ElectronicT8 & 12/SSB T8/HO
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
7/8" DIA K.O.4-1/8"
7¾"
MODELNO.
No. OF LAMPS TEMP BALLAST TYPE (T8 Lamp)
NOM.LENGTH
HX1159 1-59W 32° SSB/T8 8’
HX1259 2-59W 32º SSB/T8 8’
SX1244-8 2-44W 0° SSB/T8/HO 4’
SX1186-8 1-86W 0° SSB/T8/HO 8’
SX1286-8 2-86W 0° SSB/T8/HO 8’
MODELNO.
No. OF LAMPS TEMP BALLAST TYPE(T12 Lamp)
NOMINALLENGTH
HX1172-S 1-55W 0° SSB/T12 6'
HX1196-S 1-75W 0° SSB/T12 8'
HX1272-S 2-55W 50° SSB/T12 6'
HX1296-S 2-75W 50° SSB/T12 8'
SX1148-8-S 1-60W -20° SSB/T12/HO 4'
SX1172-8-S 1-85W -20° SSB/T12/HO 6'
SX1196-8-S 1-110W -20° SSB/T12/HO 8'
SX1248-8-S 2-60W -20° SSB/T12/HO 4'
SX1272-8-S 2-85W -20° SSB/T12/HO 6'
SX1296-8-S 2-110W -20° SSB/T12/HO 8' 2" - High Output2" - Slimline
SpecificationsHOUSING Channel and cover are of code gauge die formed steel.Deeper size channels, as used for 800 MA and 1500 MA fixtures, are reinforced with ribs, running the entire length. Dual purpose plates act as coupler for continuous row mounting.
FINISH All painted metal parts are treated with a rust-inhibitor and baked at 375ºF in a hi-reflective white enamel to provide minimum reflectance factor of 88%.
ELECTRICAL All units wired with ballasts incorporating Class P thermal protection, f or 120 volt, 60 cycle AC. Other voltages available.
INSTALLATION May be surface or pendant mounted, individually or in continuous rows.
LABELS U/L combined with I.B.E.W.
6/08
34
Duraleer Parallel Series ElectronicT8 & T12/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Options & Accessories
MODELNUMBER
LAMPS BALLASTTYPE
NOMINALLENGTH
IN INCHES
TH1217 2-17W SSB/T8 24”
Q1225 2-25W SSB/T8 36”
Q1232 2-32W SSB/T8 48”
Q1232T 4-32W SSB/T8 96”
Q12332 3-32W SSBT8 48”
Q12332T 6-32W SSBT8 96”
TH14417 4-17W SSB/T8 24”
Q14425 4-25W SSB/T8 36”
Q14432 4-32W SSB/T8 48”
Q1260-S 2-40W SSB/T8 60”
Code Description
B1 Emergency Ballast
F Fusing
K Grounded convenience outlet
M Turn knob switch installed
SPTW6’ 6’ Cord/plug white
Z Plug in wiring
Note: 1. T indicates tandem.2. To order fixtures with aluminum housing, use prefix "AL." Consult
factory for availability.3. To order fixtures with specular silver film reflectors, use prefix "SR."
MODELNUMBER
LAMPS BALLAST TYPE
NOMINALLENGTHIN INCHES
T1215-S 2-15W SSB/T12 18”
T1220-S 2-20W SSB/T12 24”
Q1230-S 2-30W SSB/T12 36”
Q1240-S 2-40W SSB/T12 48”
Q1240T-S 4-40W SSB/T12 96”
T1420-S 4-20W SSB/T12 24”
Q1430-S 4-30W SSB/T12 36”
Q1440-S 4-40W SSB/T12 48”
T12 Electronic
Options & AccessoriesModel No.
AsymmetricNo. of Lamps
Nom.Lengthin Feet
A24 1 or 2 2
A36 1 or 2 3
A48 1 or 2 4
T8 Electronic
3¾"
4 LAMP PARALLEL
6/08
35
Add-O-Leer Continuous Run LPF,ElectronicT12 & T8/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without noticeOther options and accessories available. Call factory for more information.
MODEL NUMBER NUMBER OF LAMPS
BALLASTTYPE
NOMINALLENGTH
EE1114 1-14W Starter type, LPF 15” EE1115 1-15W Starter type, LPF 18” EE1120 1-20W Starter type, LPF 24” ET1114-S 1-14W SSB/T12 15” ET1115-S 1-15W SSB/T12 18” ET1120-S 1-20W SSB/T12 24” EQ1130-S 1-30W SSB/T12 36” EQ1140-S 1-40W SSB/T12 48”
Code Description
B1 Emergency BallastF FusingK Grounded convenience
outletM Turn knob switch installedSPTW6’ 6’ Cord/plug whiteZ Plug in wiring
MODEL NUMBER NUMBEROF LAMPS
BALLASTTYPE
NOMINALLENGTH
IN FT.
ETH1117 1-17W SSB/T8 2' EQH1125 1-25W SSB/T8 3' EQH1125T 2-25W SSB/T8 6' EQH1132 1-32W SSB/T8 4' EQH1132T 2-32W SSB/T8 8' EQH1160 1-40W SSBT8 5’
T8/SSB
Options & Accessories
Note: 1. To order fixtures for biax lamps, prefix model number with BIA.Consult factory for exact dimensions.2. T indicates tandem.
SpecificationsHousing: Channel, cover and ends are of code gauge, die formed painted white steel construction. Dual purpose end plates act as a coupler for continuous row mounting. All chassis components snap into place without screws.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contactwith housing for maximum heat dissipation.
Labels: U/L listed and I.B.E.W.
11/16, ¾"
Optional ReflectorsAsymmetric Symmetric
EA1120 ES1120EA1130 ES1130
EA1140 ES1140
6/08
36
Add-O-Leer Continuous Run Side Mounted Series
HPF,ElectronicT12 & T8/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
MODELNO.
Lamp Type Ballast Type Nom.Length
ETX1114-S 1-14W SSB/T12 15”ETHX1114-S 1-14W SSB/T12 HPF 15”ETX1115-S 1-15W SSB/T12 18”ETHX1115-S 1-15W SSB/T12 HPF 18”ETX1120-S 1-20W SSB/T12 24”ETHX1120-S 1-20W SSB/T12 HPF 24”EQX1130-S 1-30W SSB/T12 36”EQX1140-S 1-40W SSB/T12 48”
Options & Accessories
SpecificationsHOUSING: Channel, cover and ends are of code gauge, die formed cold rolled primed steel construction.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporation Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation.
INSTALLATION: Units may be surface or pendant mounted, individuallyor in continuous rows.
LABELS: U/L listed and I.B.E.W.
Code Description Code DescriptionB1 Emergency Battery Pack F FusingEAX Asymmetric reflector BIA (prefix) For Biax lampsSPTW6’ Cord/plug/white
ETHX1117 ……... 1-17W SSB/T8 24"EQHX1125 ……... 1-25W SSB/T8 36"EQX1125T ……... 2-25W SSB/T8 72"EQHX1132 ……... 1-32W SSB/T8 48"EQX1132T ……... 2-32W SSB/T8 96"ETHX1217 ETHXS1217 2-17W SSB/T8 24"EQX1225 EQXS1225 2-25W SSB/T8 36"EQX1232 EQXS1232 2-32W SSB/T8 48"
All K.O. 7/8" Diam.
EQXSversion(2 light
special)
MODELNO.
PerpendicularMount(2 light Special)
LampType
Ballast Type Nom.Length
ETX1215-S ETXS1215-S 2-15W SSB/T12 18”ETHX1215-S ETHXS1215-S 2-15W SSB/T12 HPF 18”ETX1220-S ETXS1220-S 2-20W SSB/T12 24”ETHX1220-S ETHXS1220-S 2-20W SSB/T12 HPF 24”
EAX– Asymmetric Reflector
6/08
SSB/T8
SSB/T12
MODELNO.
Lamp Type Ballast Type Nom.Length
37
Staggered Strip - One Lamp ElectronicT8/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SpecificationsHOUSING: Channel, cover and ends are code gauge die formed steel construction.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation.Other voltages available. Energy saving ballasts also available.
INSTALLATION: Units may be surface or pendant mounted,individually or in continuous rows.
LABELS: U/L and I.B.E.W.
MODELNUMBER
No. OF LAMPS BALLASTTYPE
NOMINALLENGTH
SSH1117 1-17W SSB/T8 24”
SSH1125 1-25W SSB/T8 36”
SSH1132 1-32W SSB/T8 48”
SS1125T 2-25W SSB/T8 69”
SS1132T 2-32W SSB/T8 93”
T indicates tandem.Note: Reflectors are available on special order.
Code Description
B1 Emergency Ballast
6/08
38
Staggered Strip - Two Lamp ElectronicT8 & T12/SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray
Specifications
HOUSING: Channel, cover and ends are code gauge die formed steel construction.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Other voltages are available. Energy saving ballasts also available.
INSTALLATION: Units may be surface or pendant mounted,individually or in continuous rows.
PACKAGING: Individually boxed, or bulk packed as required.
LABELS: U/L listed combined with I.B.E.W.
MODELNUMBER
No. OF LAMPS BALLASTTYPE
NOMINALLENGTH
SS1220-S 2-20W SSB/T12 27”
SS1230-S 2-30W SSB/T12 39”
SS1240-S 2-40W SSB/T12 51”
SS1230T-S 4-30W SSB/T12 75”
SS1240T-S 4-40W SSB/T12 99”
MODELNUMBER
No. OF LAMPS BALLASTTYPE
NOMINALLENGTH
SSH1217 2-17W SSB/T8 27”
SS1225 2-25W SSB/T8 39”
SS1225T 4-25W SSB/T8 75”
SS1232 2-32W SSB/T8 51”
SS1232T 4-32W SSB/T8 99”
T indicates tandem.
Note:.1. To order with aluminum housing, use prefix “AL”.2. Reflectors are available on special order. Contact factory.
Code Description
B1 Emergency Ballast
2',3' & 8' units
6' and 8' tandem units
CrossSection
6/08
39
Narrow Staggered Strip ElectronicT8 & T5, T5HO
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
Specifications
HOUSING: Channel, cover and ends are code gauge die formed steel construction.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Other voltages are available. Energy saving ballasts also available.
INSTALLATION: Units may be surface or pendant mounted,individually or in continuous rows.
PACKAGING: Individually boxed, or bulk packed as required.
LABELS: U/L listed combined with I.B.E.W.
MODELNUMBER
No. OF LAMPS BALLASTTYPE
NOMINALLENGTH
NSS1217 2-17W SSB/T8 28"
NSS1225 2-25W SSB/T8 40"
NSS1232 2-32W SSB/T8 52"
MODELNUMBER
No. OF LAMPS BALLASTTYPE
NOMINALLENGTH
NSS1214 2-14W T5 26½"
NSS1221 2-21W T5 38¼"
NSS1228 2-28W T5 50"
NSS1224-HO 2-24W T5/HO 26½"
NSS1239-HO 2-39W T5/HO 38¼"
NSS1254-HO 2-54W T5/HO 50"
Code Description
B1 Emergency Ballast
3 3/16"
Optional joiner clips available for continuous row mounting.
Options & Accessories
4"
®4"º
®4"º
22"3¾ 22"
T8 Lengths:24"36"48"
T8 Lengths:28"40"52"
T5 - 2 1/2"T8 - 2 7/8"
6/08
40
Narrow Channel Strip Electronic T8 & T5 ,T5HO
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
CatalogNumber
Description Lamp BallastType
Nom.Length
T8NET1217 2 LAMP STRIP 2-17W SSB/T8 2'
NEQ1225 2 LAMP STRIP 2-25W SSB/T8 3'
NEQ1232 2 LAMP STRIP 2-32W SSB/T8 4'
NEQ1260 2 LAMP STRIP 2-40W SSB/T8 5’
T5NEQ1121 1LAMP STRIP 1-21W SSB/T5 3’
NEQ1128 1 LAMP STRIP 1-28W SSB/T5 4’
NEQ1135 1 LAMP STRIP 1-35W SSB/T5 5’
NEQ1221 2 LAMP STRIP 2-21W SSB/T5 3’
NEQ1228 2 LAMP STRIP 2-28W SSB/T5 4’
NEQ1235 2 LAMP STRIP 2-35W SSB/T5 5’
T5/HONET1124HO 1 LAMP STRIP 1-24W SSB/T5/HO 2’
NEQ1139HO 1LAMP STRIP 1-39W SSB/T5/HO 3’
NEQ1154HO 1 LAMP STRIP 1-54W SSB/T5/HO 4’
NET1224HO 2 LAMP STRIP 2-24 W SSB/T5/HO 2’
NEQ1239HO 2 LAMP STRIP 2-39W SSB/T5/HO 3’
NEQ1254HO 2 LAMP STRIP 2-54W SSB/T5/HO 4’
Code Description
B1 Emergency Ballast
F Fusing
K Grounded Convenience outlet
M Turn knob switch
SPTW6’ 6' Cord/plug white
SJTB6’ 6’ Cord/plug black
T-Tandem available in 6’ and 8’
Options & Accessories
6/08
41
NTS Series ElectronicT8 & T5 SSB
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
MODELNO.
No. of Lamps Ballast Type Nom.Length
NTS115-T8 1-15W SSB/T8 18"
NTS117-T8 1-17W SSB/T8 2'
NTS125-T8 1-25W SSB/T8 3'
NTS132-T8 1-32W SSB/T8 4'
NTS114-T5 1-14W SSB/T5 2'
NTS121-T5 1-21W SSB/T5 3'
NTS128-T5 1-28W SSB/T5 4'
Code Description Code Description
SPTW6’ 6' Cord/plug white R Pull chain
Options & Accessories
SpecificationsHousing Code gauge steel sheet metal die formed construction.
Electrical Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard. Class "A" sound rating.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted.
Installation Key hole slots provided for surface mounting,individually or in continuous rows.
Finish Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375 degrees F.
Labels U/L listed and I.B.E.W.
Other Accessories rated for 120 volt use.
NTS T8
NTS T5
6/08
42
Midget Series T5/T8 & Starter Type/LPF
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Model Number Number of Lamps
BallastType
Nom. Length in inches
White
TSW104 1-4T 5 Starter, LPF 9 1/16”
TSW106-S 1-6T 5 SSB/T5 10 ¼”
TSW108-S 1-8T 5 SSB/T5 13 ¼”
TSW115-S 1-15T 8 SSB/T8 19”
TSW119-24 1-19T 8-24” Starter, LPF 27 1/16”
TSW119-26 1-19T 8-26” Starter, LPF 29 1/16”
TSW119-28 1-19T 8-28” Starter, LPF 31 1/16”
TSW119-30 1-19T 8-30” Starter, LPF 33 1/16”
TSW215-S 2-15T 8 SSBT8 40 3/4”
ModelNumber
Number of Lamps
Ballast Type Length
TSW117 1-17W SSB/T8 25"
TSW125 1-25W SSB/T8 37"
TSW132 1-32W SSB/T8 49"
ModelNumber
Number of Lamps
Nom.LengthinInches
ModelNumber
Number of Lamps
Nom.Length in Inches
RW104 1-4T5 9-1/16 RW119-26 1-19T8-26" 29-1/16
RW106 1-6T5 12-1/16 RW119-28 1-19T8-28" 31-1/16
RW108 1-8T5 15-1/16 RW119-30 1-19T8-30 33-1/16
RW115 1-15T8 21-1/16 RW215 2-15T8 40-3/4
RW119-24 1-19T8 24" 27-1/16 RW315 3-15T8 61-1/8
SpecificationsHOUSING: Channel and back plate die-formed of heavy gauge prime steel.
FINISH: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating. Housing is electrostatically sprayed with glossy white enamel, baked at 320ºF. Chrome finish is luxuriously plated for appearance and endurance.
ElECTRICAL: Equipped with starter type, UL approved ballast for use with 120 volt, 60 cycle AC. Sockets are completely wired.
INSTALLATION: Keyhole slots provided for surface mounting, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
SPTW- 6' cord & plug/white M- Turn knob switch
T8 T5
OptionalRW Reflector
6/08
43
Midget High Performance T5 & T5 High Output
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice
SpecificationsHOUSING: Channel and back plate die formed of code gauge prime steel.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with whiteenamel and baked at 320° F. Chrome finish is luxuriously plated for appearance and endurance.
ELECTRICAL: All units wired with solid-state ballasts for 120 volt, 60 cycle AC. Other voltages available. Sockets completely wired and mounted.
INSTALLATION: Key hole slots provided for surface mounting, individually or in continuous rows.
LABELS: U/L listed and I.B.E.W.
Model Number Number/Type of Lamps
Length in inches
TSW 114 1-14W T5 22-13/16
TSW 121 1-21W T5 34-11/16
TSW 128 1-28W T5 46-1/2
TSW128T 2-28WT5 93
Model Number Number/Type of Lamps
Length in inches
TSW124HO 1-24W T5HO 22-13/16
TSW139HO 1-39WT5HO 34-11/16
TSW154HO 1-54WT5HO 46-1/2
TSW154THO 2-54WT5HO 93
Code (Suffix) Descripton
M Turn knob switch
SPTW6’ 6’ Cord & plug/white
RW Reflector
TOP 2x 3/16" DIA HOLES
1"
7/8" K.O.
BACK PLATE
Shown w/ optional reflector.
6/08
44
Midget Side Mount T5 & T5 High Output
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
Model No.Side mount
Model No.90° Angle
No. of Lamps Ballast Type Nom.Length
TSX114-T5 ……. 1-14W SSB/T5 2'
TSX121-T5 ……. 1-21W SSB/T5 3'
TSX128-T5 ……. 1-28W SSB/T5 4'
TSX135-T5 ……. 1-35W SSB/T5 5'
TSX214-T5 TSXS214-T5 2-14W SSB/T5 2'
TSX221-T5 TSXS221-T5 2-21W SSB/T5 3'
TSX228-T5 TSXS228-T5 2-28W SSB/T5 4'
TSX235-T5 ……. 2-35W SSB/T5 5'
Options & Accessories
SpecificationsHousing Code gauge steel sheet metal die formed and snap-fitconstruction.
Electrical Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard. Class "A" sound rating.Ballasts mounted in direct contac t with housing for maximum heat dissipation. Sockets completely wired.
Installation Units may be ceiling or wall mounted, individually or in continuous rows.
Finish Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375 degrees F.
Labels U/L listed and I.B.E.W.
Other Accessories rated for 120 volt use.
Model No.Side Mount
Model No.90° Angle
No. of Lamps
Ballast Type Nom.Length
TSX124-T5HO ……. 1-24W SSB/T5HO 2'
TSX139-T5HO ……. 1-39W SSB/T5HO 3'
TSX154-T5HO ……. 1-54W SSB/T5HO 4'
TSX224-T5HO TSXS224-T5HO 2-24W SSB/T5HO 2'
TSX239-T5HO TSXS239-T5HO 2-39W SSB/T5HO 3'
TSX254-T5HO TSXS254-T5HO 2-54W SSB/T5HO 4'
Code Description
R Pull chain
6/08
45
Midget Top Mount Series T5 & T5 High Output
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
MODELNO.
No. of Lamps Ballast Type Nom.Length
TST114-T5 1-14W SSB/T5 2'
TST121-T5 1-21W SSB/T5 3'
TST128-T5 1-28W SSB/T5 4'
TST135-T5 1-35W SSB/T5 5'
TST214-T5 2-14W SSB/T5 2'
TST221-T5 2-21W SSB/T5 3'
TST228-T5 2-28W SSB/T5 4'
TST235-T5 2-35W SSB/T5 5'
SpecificationsHousing Code gauge steel sheet metal die formed and snap-fitconstruction.Electrical Electronic ballast incorporating Class "P" thermal protection.120 volts AC 60 Hz standard. Class "A" sound rating. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Installation Units may be ceiling or wall mounted, individually or in continuous rows.
Finish Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375 degrees F.
Labels U/L listed and I.B.E.W.
Other Accessories rated for 120 volt use.
MODELNO.
No. of Lamps Ballast Type Nom.Length
TST124-T5HO 1-24W SSB/T5HO 2'
TST139-T5HO 1-39W SSB/T5HO 3'
TST154-T5HO 1-54W SSB/T5HO 4'
TST224-T5HO 2-24W SSB/T5HO 2'
TST239-T5HO 2-39W SSB/T5HO 3'
TST254-T5HO 2-54W SSB/T5HO 4'
2.46
1.79
1.582.46
1.79
1.58
Optional Reflectors
DRLT5
TSTS TSTA
1.79
1.79 1.79
6/08
46
Midget Biax® Series Twin Tube, Pre-heat
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
ORDERING INFORMATION
SpecificationsHOUSING: Channel and back plate die-formed of heavy gauge prime steel.
FINISH: For improved paint adhesion andrust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating. Housing iselectrostatically sprayed with glossy whiteenamel, baked at 320ºF.
ELECTRICAL: UL approved ballast for use with 120 volt, 60 cycle AC. Sockets are completely wired.
INSTALLATION: Keyhole slots provided for surface mounting, individually or incontinuous rows.
LABELS: U/L combined with I.B.E.W.
ModelNumber
Number of Lamps
BallastType
Nom.Length in
inches
TSWBX107 1-7W TT Pre-heat 8-1/16
TSWBX109 1-9W TT Pre-heat 8-1/16
TSWBX113 1-13W TT Pre-heat 9-1/16
2-5/8"
Specifications subject to change without notice.
Accessories
M Turn knob switch
SPTW6’ 6' cord & plug/white
RW Reflector
S Electronic Ballast
*Other lamp and ballast configurations available, contact factory.
6/08
47
Mini Side Mount Series T5
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
MODELNO.
No. of Lamps Ballast Type Nom.Length
CRNTSX114-T5 1-14W SSB/T5 22½"
CRNTSX121-T5 1-21W SSB/T5 34½"
CRNTSX128-T5 1-28W SSB/T5 46½"
Code Description
SPTW6’ 6' Cord/plug white
Options & Accessories
SpecificationsHousing Code gauge steel sheet metal die formed construction.
Electrical Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard. Class "A" sound rating.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted.
Installation Key hole slots provided for surface mounting,individually or in continuous rows.
Finish Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375 degrees F.
Labels U/L listed and I.B.E.W.
Other Accessories rated for 120 volt use.
Note: "X" in catalog number denotes side mount.
KEY HOLE SLOT2-PLS.
.56DD
2.125
1.375
.875
6/08
48
Reflector OptionsStrips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
General Description Specifications
Various types of reflectors are often required for different applications. Symmetric, asymmetric, and direct light reflectors are available. End views of the reflectors and housings are shown above.Other variations of reflectors are available upon request, including aluminum anodized 87% orenhanced 95% reflectivity.
Reflector: Die formed cold rolled steel.Finish: All reflectors are cleaned and treated with a three-stage phosphate coating, then electrostatically sprayed with a high quality white baked enamel providing a minimum 87% reflectivity.
Measurements subject to change without notice.
Model No: EAXOne lamp side mount asymmetric reflector.
Model No: ESXDouble side mount symmetric reflector.
Model No: EATop mount one light asymmetric reflector.
Model No: ESOne lamp side mount symmetric reflector.
Model No: EA-DRLOne lamp top mount direct light reflector.
Model No: SS1AR-One lamp stagger asymmetric reflector.Model No: SS2AR-Two lamp stagger asymmetric reflector.
Model No: SS1SR-One or two lamp stagger narrow symmetric reflector.Model No: SS2SR-One or two lamp stagger narrow symmetric ref lector.
NOTE: When ordering reflectors, please indicate row lengths and
fixture lengths.
Model No: ADRLTwo lamp top mount direct light reflector.
09/08
49
Features:
• Minimizes lamp breakage
• Safely contains shattered lamp
• Boosts light efficiency in low temperatures
• Reusable
• Made of unbreakable Lexan
Duray Fluorescent Manufacturing Company Inc.2050 West Balmoral Avenue Chicago, IL 60625 Phone 773.271.2800 Fax 773.271.4410www.durayinc.com
AccessoriesStrips
ModelNo.
Lamp Size Nom.Length
LS20 20W TS 22"
LS30 30W RS 34"
LS32T8 32WT8 46”
LS40 40W RS 46"
LS48 40W Slimline 44"
LS72 F72T12 (specifiy slimline, HO, SHO or VHO) 68"
LS96 F96T12 (specify slimline, HO, SHO, or VHO) 92"
Model No. Fits Fixture Nom.Length
WG-3 Open strip 3" wide 48"
WG-4 Open strip 4¼" wide 48"
WG-11 Reflector type industrials 11" wide 48"
WG-13 Reflector type industrials 13" wide 48"
Lexan Protective Sleeve
Hinged Wire Guard
Note: Specifications subject to change without notice.
09/08
50
Spec D Lite T5 Electronic
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
3/16" DIA. K.O. (3)MOUNTING HOLES (2)
1/2" DIA. K.O.
7/16" DIA. K.O.
1" SQ. K.O.9/16" x 1-1/8" K.O.
Bottom Without Diffuser
Back
3/16" DIA. K.O. 7/8" DIA. K.O.
1"
5"
PROPRIETARY NOTEExcept for uses expressly granted in writing, information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co.Specification subject to change without notice.
CATALOGNo.
LAMP BALLASTTYPE
LENGTH
DUC108-ES 1-8WT5 Electronic 12¼"
DUC113-ES 1-13WT5 Electronic 21½"
DUC208-ES 2-8WT5 Electronic 24½"
DUC813-ES 1-8WT51-13WT5
Electronic 33½"
DUC213-ES 2-13WT5 Electronic 42½"
CATALOGNo.
LAMP BALLASTTYPE
LENGTH
DUC114 1-14WT5 ELECTRONIC 22-11/16”
DUC121 1-21WT5 ELECTRONIC 34-1/2”
DUC128 1-28WT5 ELECTRONIC 46-5/16”
CODE DESCRIPTION CODE DESCRIPTION
K Convenience outlet N Rocker Switch
40 Connector SPTW6’ 6’ Cord/plug/white
Specifications
HOUSING: Entire construction rigidly die formed of code gauge steel.
SHIELDING: White ribbed acrylic diffuser easily installed and removable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with "A" sound rated ballasts incorporating Class P thermal protection, for 120 vold, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L and I.B.E.W.
Accessories rated for 120 volt ballast.Additional options and accessories available. Contact factory for details.
6/08
51
NUC Series T5
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Accessories rated for 120 volt ballast.Additional options and accessories av ailable.Contact factory for details.
Series:
NUC - Narrow task light
ColorW - WhiteB- Black
Lamp Wattage & nominal fixture length
Lamp TypeT5 - 5/8" lamp diameter
Options & Accessories
108 - 12½", 8 watt, T5113 - 21½", 13 watt, T5114 - 22¾", 14 watt, T5121 - 34½", 21 watt, T5128 - 46½", 28 watt, T5208 - 24½", (2) 8 watt, T5213 - 42½", (2) 13 watt, T5813 - 33½", (1) 8 watt, (1) 13 watt, T5
J - Black cord with in-line switch & plugSPTW6’ - 6' white cord w/ plug
ORDERING INFORMATION: Example NUCW114 - T5-Q
- -
SpecificationsHOUSING: Code gauge steel sheet metal die formed construction.
SHIELDING: One piece UV stabilized clear translucentpolycarbonate diffuser for soft and even - glare illumination.Installs and removed by finger pressure for ease of re-lamping.
ELECTRICAL: Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard. Class "A" sound rating. Ballasts mounted in direct contact with housing for maximum head dissipation. Sockets completely wired.
INSTALLATION: Key hole slots provided for surface mounting, individually or in continuous rows.
FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375°F. Custom colors available, consult factory.
LABELS: U/L listed and I.B.E.W.
OTHER: Accessories rated for 120 volt use.
*Other options, lamp and ballast configurations available, consult factory. End View
2.44
1.03
.56 DDKO 2- PLS
.50 KO 2-PLS.
Front view without diffuser
T5NUC
10/03
52
7/8" (2) KO
6"1-1/8"
Little "D" Lite Starter Type T5, T8& T12/SSB,Electronic
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Model Number Number of Lamps
Ballast Type Nominal Length
MIDGET SIZE
MUC108-S 1-8W SSB/T5 12-1/4"
MUC115 1-15W Starter type, LPF T8
18-1/8"
MUC115-S 1-15W SSB/T8 18-1/8”
COMPACT SIZE
TUC114-S 1-14W SSB/T12 15-1/8"
TUC115-S 1-15W SSB/T12 18-1/8"
TUC120-S 1-20W SSB/T12 24-1/8"
QUC130-S 1-30W SSB/T12 36-1/8"
QUC140-S 1-40W SSB/T12 48-1/8"
SPECIFICATION MODELS
HUC115-S 1-15W HPF/SSB/T12 18-1/8"
HUC120-S 1-20W HPF/SSB/T12 24-1/8"
HUC130-S 1-30W HPF/SSB/T12 36-1/8"
HUC140-S 1-40W HPF/SSB/T12 48-1/8"
ELECTRONIC T8
HUC117 1-17W T8/SSB 24-1/8”
HUC125 1-25W T8/SSB 36-1/8”
HUC132 1-32W T8/SSB 48-1/8”
OPTIONS & ACCESSORIES (rated for 120 volt ballast)
CODE DESCRIPTION
K Grounded Convenience Outlet
N Rocker switch installed (white)
SPTW6’ 6' cord/plug/white
MIDGETELECTRONICCOMPACT & SPECIFICATION
7/8" (2) KOback
1-9/16" 1-9/16"
Diffuser
1-13/16"2-5/8"
Diffuser
1-5/8"2¾"
Chrome, Oak or Walnut finish available on special order. Additional options and accessories available. Call factory for more information.
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: One piece light stabilized white translucent acrylic diffuser for soft and even-glare illumination. Easily installed and removable by finger pressure.
FINISH: For improved adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating.Bright chrome is luxuriously plated for appearance and endurance.
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available for HPF models. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completelywired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L and I.B.E.W.
6/08
53
Deluxe D Lite Electronic T12 & T8/SSB
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Entire construction rigidly die formed of code gauge steel.
SHIELDING: White ribbed Acrylic diffuser easily installed andremovable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with "A" sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages are available.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L and IBEW
CATALOGNUMBER
LAMP BALLASTTYPE
LENGTH
DDUCH115-S 1-15W SSB/T12 18-1/6"
CATALOGNUMBER
LAMP BALLASTTYPE
LENGTH
DDUCH117 1-17W T8/SSB 24-1/6"
DDUCH125 1-25W T8/SSB 36-1/6"
DDUCH132 1-32W T8/SSB 48-1/6"
Bottom without diffuser
Back
CODE DESCRIPTION
K Grounded convenience outlet
N Rocker switch installed (white)
SPTW6’ 6' Cord/plug/white
Options & Accessories
Accessories rated for use with 120 volt ballast only. Additional options and accessories available. Call factory for details.
6/08
54
Task “D” Lite T8/SSB,T5 Electronic
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: Ribbed acrylic diffuser. Easily installed and removable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
CATALOGNUMBER
LAMP BALLAST TYPE LENGTH
DSF115-S 1-15W SSB/T8 18¼"
ELECTRONIC
DSF108-ES 1-8W T5 12¼"
DSF113-ES 1-13W T5 21¼"
DSF208-ES 2-8W T5 24¼"
DSF813-ES 1-8W,1-13W T5 33½"
DSF213-ES 2-13W T5 42½"
CODE DESCRIPTION
F Fuse
K Grounded Convenience Outlet
N Rocker switch installed (white)
SPTW6’ 6' Cord/plug/white (more cord & plug options available)
Accessories rated for use with 120 volt ballast only.
Options & Accessories
2-7/8”
1/2”
RibbedDiffuser
End view withoutdiffuser
1-3/8”
7/8” DIA KO EACH END
4¾”
6/08
55
Solid Front Task—T5 ElectronicT5 /SSB
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formed of codegauge steel.
SHIELDING: Ribbed acrylic diffuser. Easily installed and removable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
CATALOGNUMBER
LAMP BALLAST TYPE LENGTH
DST114 1-14W T5 Electronic 22-13/16”
DST121 1-21W T5 Electronic 34-11/16”
DST128 1-28W T5 Electronic 46-1/2”
CODE DESCRIPTION
F Fuse
K Grounded Convenience Outlet
N Rocker switch installed (white)
SPTW6’ 6' Cord/plug/white (more cord & plug options available)
38 Toggle switch installed
*Accessories rated for use with 120 volt ballast only.
Options & Accessories
3”1/2”
Ribbed Diffuser
6/08
3 X 1/2 KO
1-1/8 X 9/16 KO1 SQ. KO 2X MTG. HOLES
Top without diffuser:
Right/Left ends—identical
5”
5/8” DIA KO
1.1
Front:
2x 3/16 DIA. KOStarter hole Cover lance
3x 1/2 DIA KO 3x Ballast MNT.
Socket MNT.
56
Task Big D Lite ElectronicT12 & T8/SSB
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Entire construction rigidly die formed of code gauge steel.
SHIELDING: Ribbed acrylic diffuser. Easily installed andremovable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with "A" sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages are available.Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L and IBEW
CATALOGNUMBER
LAMP BALLASTTYPE
LENGTH
DSFHD115-S 1-15W SSB/T12 18-1/16”
DSFH117 1-17W SSB/T8 24-1/16”
DSFH125 1-25W SSB/T8 36-1/16”
DSFH132 1-32W SSB/T8 48-1/16”
CODE DESCRIPTION
F Fuse
K Grounded Convenience Outlet
N Rocker switch installed (white)
SPTW6’ 6' Cord/plug/white (more cord options available)
38 Toggle switch installed
Accessories rated for use with 120 volt ballast only.
Options & Accessories3”
1/2”
RibbedDiffuser
End view withoutdiffuser
1-3/4”
7/8” DIA KO EACH END
5-1/8”
Two mounting holes Two 7/8” DIA KO
6/08
Two mounting holes
57
Pre-wired Little "D" Lite Electronic/Starter Type
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
ModelNumber
Number of Lamps
Ballast Type NominalLength
SPMUC115-S 1-15W Electronic 18-1/8"
SPKMUC115 1-15W Starter type, LPF 18-1/8”
OPTIONS & ACCESSORIES
CODE DESCRIPTION
L Lamp installed (1-F15T8CW)
R Pull chain
Accessories rated for use with 120 volt ballast only.
Chrome, Oak or Walnut finish available on special order. Consult factory.
SPECIFICATIONS
Housing: Entire construction rigidly die-formed of code gauge steel.
Shielding: One piece light stabilized white translucent acrylic diffuser for soft and even glare-free illumination. Easily in-stalled and removable by finger pressure.
Finish: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating.
Electrical: All units wired with UL Approved ballasts for 120 volt, 60 cycle AC current only. Ballasts mounted in direct con-tact with housing for maximum heat dissipation.
Installation: Units may be surface mounted, individually or in continuous rows. Prepunched holes in body facilitate quick mounting to ceiling outlet boxes.
Labels: U/L combined with I.B.E.W.
ORDERING INFORMATION
9”
4.5”
18”
1.25”
6/08
58
JXUC Series Xenon
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
CATALOGNo.
XenonLAMP
NOMINALLENGTH
JXUC8120 1-20W 8”
JXUC16220 2-20W 16”
JXUC24320 3-20W 24”
JXUC32420 4-20W 32”
Xenon Under Cabinet Fixtures
120 volt Xenon bulb, no transformer! Our new Xenon Under Cabinet lights offer unmatched features—best suited for task and accent lighting applications. Available in 3 decorative finishes to fully compliment any kitchen décor. Standard finish: White
Key Features
• 120 volt Xenon bulb• Three times the bulb life of Halogen• Low profile—only 1¼” in height• Burns significantly cooler than Halogen• No harmful ultra violet rays• Dimmable• Multiple ½” knockouts• Full length frosted glass lens• Hi-Lo dimmer switch• Hinged lens allows for easy lamp
replacement• Finishes: Bronze, Brushed Steel• Add BS as suffix for Brushed Steel• Add BZ as suffix for Bronze
09/08
High Tech Xenon Under Cabinet Lights without Transformer!
1¼”
4½”
Mounting surface
59
GLI T4 & T5 SeriesTask
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
ModelNumber
Number of Lamps
Ballast Type NominalLength
(A)
GLI106 1-F6T4 Electronic 10¾”
GLI110 1-F10T4 Electronic 15½”
GLI116 1-F16T4 Electronic 20½”
GLI120 1-F20T4 Electronic 24½”
GLI114 1-F14T5 Electronic 24½”
GLI121 1-F21WT5 Electronic 35¾”
GLI128 1-F28WT5 Electronic 47½”
GLI135 1-F35WT5 Electronic 59½”
APPLICATIONS• Under Cabinet and Bookcases• Office Furniture• Computer Workstations• Retail Displays• Task Lighting
Suitable for indoor use only
FEATURES• Fixtures are complete with a cool white lamp,
rocker switch, nominal 5’ white cord set, and UV stabilized lens.
• Fixtures can be installed in continuous rows up to a maximum of ten fixtures.
• To space fixtures apart, connection cables are available in lengths of 6”, 12”, 18”, 24”, 36” and 48”.
• Fixtures can be hardwired.
6/08
1¾”
A
ORDERING INFORMATION
1¾”
3/4”
60
Duralume Premium Lay-In ElectronicT8 & T12/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice
SpecificationsHousing: Body and hinged door frame are die-formed of code gauge steel construction and designed for maximum strengthand uniformity. Standard in-stock fixtures are 1’ x 2’, 1’ x 4’, 2’ x 2’, and 2’ x 4’.
Finish: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Installation: Units are recessed mounted, in inverted T-Gridceiling system, individually or in continuous rows. Lens frame can be hinged from either side and removed without tools.
Labels: U/L listed combined with I.B.E.W.
ORDERING INFORMATION: Example L24432SP2
Series:
L: Premium Lay-inLH: Use LH when high power factor is desired on 20 watt.CPL: Chicago Plenum
Nominal Dimensions L x W
12– 1’ x 2’14—1’ x 4’22—2’ x 2’24—2’ x 4’44– 4’ x 4’
Number of Lamps Wattage
17—17 watt, T8/SSB2—20 watt, T1232—32 watt, T8/SSB32U—32 watt u-lamp4– 40 watt, T124U—40 watt u -lamp, T124BX—40 watt biax
Options
H3—3 wire whipB1—Battery Pack2B– 2 ballastsC—10% THD
2—two3– three4—four6—six8– eight
Louver Options
For lens and louver op-tions, see accompany-ing page.
Optional Frame
RA: ¾” regressed alu-minum white frame
2’x2’ - 2’x4’
Reflector
SR—Enhancement Reflector
09/08
61
Louver Options Dimensional Data
Duralume Premium Lay-in Series
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
To Order the Following Diffusers Add to Catalog Number
Plastics Louvers
Silver White
Prismatic Acrylic #12 Pattern A
Prismatic Acrylic #12 Pattern .125 P
Matte White Acrylic MWA
Specular Parabolic Louver ½"x½"x½" SP1
Specular Parabolic Louver ¾"x¾"x½" SP4
Specular Parabolic Louver ¾"x¾"x 3/8" SP5
Specular Parabolic Louver 1½"x1½"x1" SP2
Matte White Dished Acrylic RH
White Cubed Acrylic Louver ½"x½"x3/8" PLA
Parallel Blade Louver ¾" deep x 2" spacing
PBMA
Parallel Blade Louver 1½" x 2" spacing PBLA
Aluminum 3" x 3" x 1½" PLLA
1light
2light
3light
4light
6light
8light
1x2 x x
2x2 x x x x x
1x4 x x x x
2x4 x x x x
4x4 x x
Product Configurator
1’x2’ - 1’ x 4’
1’ x 4’
Specifications subject to change without notice
62
Shallolume Lay-In Series Electronic T8 & T12/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice
SpecificationsHousing: Body and hinged door frame are die-formed of code gauge steel construction and designed for maximum strength.Standard in-stock fixtures are 1’ x 4’, 2’ x 2’, and 2’ x 4’.
Shielding: See ordering data.
Finish: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320º F. Minimum of 88% reflectivity.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Installation: Units are recessed mounted, in inverted T-Gridceiling system, individually or in continuous rows. Lens frame can be hinged form either side and removed without tools.
Labels: U/L listed combined with I.B.E.W.
ORDERING INFORMATION: Example LE24432SP2
Series:
LE—ShallolumeCL— Chicago PlenumLHE— Use LH when high power factor is desired on 20 watt.
Nominal Dimen-sions
14—1’ x 4’22—2’ x 2’24—2’ x 4’
Number of Lamps Wattage
17—17 watt, T8/SSB2—20 watt, T1232—32 watt, T8/SSB32U—32 watt u-lamp4– 40 watt, T124U—40 watt u -lamp, T12
Options
H3—3 wire whipB1—Battery Pack2B– 2 ballastsC—10% Harmonics
2—two3– three4—four
Louver Options
For lens and louver op-tions, see accompany-ing page.
1½”
09/08
63
Narrow-Lume Lay-In ElectronicT8/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SpecificationsHOUSING: Entire construction rigidly die-formed of code gauge steel.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direc t contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units are recessed mounted, in inverted T-Grid ceiling system, individually or in continuous rows.
LABELS: U/L and I.B.E.W.
Ordering Information
OPTIONS: H3: 3-wire whip
To Order the Following Diffusers Add to Catalog Number Plastics Louvers
Silver White Prismatic Acrylic #12 Pattern A Prismatic Acrylic #12 Pattern .125 P Matte White Acrylic MWA Specular Parabolic Louver½"x½"x½"
SP1
Specular Parabolic Louver¾"x¾"x½"
SP4
Specular Parabolic Louver1½"x1½"x1"
SP2
White Cubed Acrylic Louver½"x½"x3/8"
PLA
Parallel Blade Louver ¾" deep x 2"spacing
PBMA
MODEL NUMBER
NUMBER OF LAMPS
BALLASTTYPE
NOMINALLENGTH
LNH14132 1-32W SSB/T8 4’ LNH14232 2-32W SSB/T8 4’
6/08
64
Shallolume Flange-Type ElectronicT8/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SpecificationsHOUSING: Body and hinged door frame are die-formed of code gauge steel construction and designed for maximum strength and uniformity. Standard in-stock fixtures are 1’×2’, 1’×4’, 2’×2’, 2’×4’, and 4’×4’.
FINISH: All metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation.
INSTALLATION: Units are recessed mounted individually or in continuous rows in plaster, concealed mechanical or wood framed ceiling systems. Mounting accessories include adjust-a-wings. Lens frame can be hinged from either side and removed without tools.
LABELS: U/L and I.B.E.W. To Order the Following Diffusers Add to Catalog Number
Plastics Louvers
Silver White
Prismatic Acrylic #12 Pattern A Prismatic Acrylic #12 Pattern .125 P Matte White Acrylic MWA Specular Parabolic Louver ½"x½"x½" SP1 Specular Parabolic Louver ¾"x¾"x½" SP4 Specular Parabolic Louver 1½"x1½"x1" SP2 White Cubed Acrylic Louver ½"x½"x3/8" PLA Aluminum Louver 1½" deep PLLA
MODELNUMBER
NUMBER OF LAMPS
BALLASTTYPE
NOMINALWIDTH
NOMINALLENGTH
R12217 2-17W SSB/T8 1’ 2’R14232 2-32W SSB/T8 1' 4'R14332 3-32W SSB/T8 1’ 4’R14432 4-32W SSB/T8 1’ 4’R22217 2-17W SSB/T8 2' 2’R22232U 2-32UW SSB/T8 2' 2’R22417 4-17W SSB/T8 2’ 2’R24332 3-32W SSB/T8 2' 4'R24432 4-32W SSB/T8 2' 4'
MODELNUM-BER
DESCRIPTION MODELNUMBER
DESCRIPTION
B1 Emergency battery pack RA (prefix) ¾“ regressed aluminum frame—white
F HLR/GLR
GASK Gasketing
OPTIONS & ACCESSORIES
6/08
65
Shallolume Flange-Type DIMENSIONAL DATA
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice
B
2’ x 2’ 2’ x 4’
A2’ x 2’ A: 22-3/4”
B: 19-5/8” 2’ x 4’ C: 5” 4’ x 4’ A: 47-7/16”B: 46-1/4”C: 5-1/2”
2’ x 2’
(6) 7/8 K.O.
14
8-1/4
8-3/8
19-5/8
4 16
24
1-1/4
2’ x 4’
19-5/8 12 (8) 7/8 K.O.
5
6-1/2 17-1/2 17-1/2
48
1’ x 4’
1’ x 2’1’ x 4’
7-3/4
5
10-3/4 1-1/4
(6) 7/8 K.O.
1-25/32
42-11/16
46-1/4
4’ x 4’
5 19 1948
(6) 7/8 K.O.(4) REINFORCED
1-25/32
CEILING OPENINGSINDIVIDUAL INSTALLATION
1 X 2—12¼” X 24 ¼”
1 X 4—12¼” X 48 ¼”
2 X 2—24¼” X 24 ¼”
2 X 4—24¼” X 48 ¼”
adjusta-wings: Factory installed, swings out to permit fixture to be sup-ported on structural channels of acousti-cal ceiling or other ceiling support. A d-justable for proper alignment by turning of easily accessible, double-leadthreaded screws.
AW—adjusta-wing: four required per fixture.
Shallolume Flange Series features:
Specifications subject to change without notice.
66
Narrow-Lume Flange ElectronicT8/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SpecificationsHOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: See Ordering Data.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120V, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units are recessed mounted individually or in continuous rows.
LABELS: U/L combined with I.B.E.W.
Ordering Information
MODEL NUMBER NUMBER OF LAMPS
BALLAST TYPE NOMINALLENGTH
RN14132 1-32W SSB/T8 4’ RN14232 2-32W SSB/T8 4’
To Order the Following Diffusers Add to Catalog Number Plastics Louvers
Silver White Prismatic Acrylic #12 Pattern A Prismatic Acrylic #12 Pattern .125 P Matte White Acrylic MWA Specular Parabolic Louver ½"x½"x½" SP1 Specular Parabolic Louver ¾"x¾"x½" SP4 Specular Parabolic Louver 1½"x1½"x1" SP2 White Cubed Acrylic Louver½"x½"x3/8"
PLA
Parallel Blade Louver ¾" deep x 2"spacing
PBMA
6/08
67
Parab– Ray SeriesRecessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
09/08
ORDERING INFORMATION: Example DCP22232U-9-B1
Series
DCP
Nom. Dimension Number of Lamps Lamp Type32 - 32W, SSB/T832U - 32W U-lamp, SSB/T817 - 17W, SSB/T840BX - 40W, Biax28 - 28W, 4', T554 - 54W, 4', T5HO
2 - 2 lamps3 - 3 lamps4 - 4 lamps
DCP
14 - 1’x4’22 - 2’x2’24 - 2’x4’
No. of Cells89161832
OptionsB1—Emergency Ballast2B– Two ballastsC—10% HarmonicsCP—Chicago Plenum
__
Specifications
Housing: Body of die-formed code gauge steel construction and designed for maximum strength. Standard in-stock fix-tures are 1’ x 4’, 2’ x 2’, and 2’ x 4’.
Louver: Aluminum louver consists of a cellular assembly of inter connecting wedge-shaped baffles.
Finish: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320º F. Minimum of 88% reflectivity.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completelywired.
Installation: Units are recessed mounted, in inverted T-Gridceiling system, individually or in continuous rows. Louver can be hinged from either side and removed without tools.
Labels: U/L listed combined with I.B.E.W.
Specifications subject to change without notice.
68
Recessed Multi-spot / Flood PAR 38 Incandescent
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SpecificationsHOUSING: Code gauge sheet metal die formed construction.
LAMP: (3) 100 watt PAR38 lamps. Lamp has built-in reflectorand comes in spot or flood configurations (by others).
LAMP SOCKETS: High termerature porcelain medium base with nickel plated copper screw shell.
LAMP ADJUSSTMENT: 45° aiming and 358° rotation.
ELECTRICAL: 120 volts AC 60Hz. Recessed housing vented for maximum heat dissipation. Accepts ¾" diameter conduit.
INSTALLATIONS: Recessed suspended grid ceiling.
FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375° F. Custom colors available, consult factory.
LABELS: U/L listed and I.B.E.W.
*Other lamp and ballast configurations available, consult factory.
*Other mounting/installation configurations available, consult factory.
Model Number Number of Lamps
MOD338 3-100 watt
Ordering Information
10/08
69
Genesis Series ElectronicT8/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SpecificationsHOUSING: 20 gauge cold rolled steel.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
PERFORATED BAFFLE: White perforated metal basket. Optional white opal ac rylic lens inlay.
LAMPS: 2 or 3 biax lamps.
FINISH: Low gloss, high reflectivity powder coat finish. Pre-treatedwith iron phosphate for superior paint adhesion.
MOUNTING: Standard troffer mounting for T-bar ceiling.
LABELS: U/L listed and I.B.E.W.
Ordering Information
5-5/8"
23-3/4"
Catalog Number Nom.Dimension
Lamp Type BallastType
GEN22240BX 2x2 (2) 40W Biax SSB
GEN22340BX 2x2 (3) 40W Biax SSB
GEN24232 2X4 (2) 32W SSB/T8
GEN24332 2X4 (3) 32W SSB/T8
8"
3-1/8"
6/08
70
32 - 4’, 32W, T840 - 4’, 40W, T12’39- 4’, 39W, Slimline, T1260- 4’, 60W, High Output, T1259– 8’, 59W, IS.T886– 8’, 86W, High Output, T875– 8’, 75W, Slimline, T12110– 8’, 110W, High Output, T12
Recessed IndustrialRecessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications
Housing: Body is die-formed of code gauge steel construction and designed for maximum strength. Standard in-stockfixtures are 1’ x 4’, 1’ x 8’.
Finish: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320º F. Minimum of 90% reflectivity.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Installation: Units are recessed mounted, in inverted T-Grid ceiling system, individually or in continuous rows.
Labels: U/L listed combined with I.B.E.W.
09/08
ORDERING INFORMATION: Example RI4232-W
Specifications subject to change without notice.
SeriesRI
RI
Lamp Type4- 4’8- 8’16-16’ (two housings)
1 - One Lamp2 - Two lamps
SizeB1 - Emergency Battery PackB2 - Emergency Battery Pack
Options
-
11.812
5.2811.875
47.968
6.00
95.968
6.00
No. of Lampsin cross section Tandem Option
T– Tandem(8’ housing with 4’ lamps in tandem)
71
HIF Series T5 Twin Tube
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
SPECIFICATIONS
HOUSING: Body and hinged door frame are die-formed code gauge steel construction anddesigned for maximum strength and uniformity.
ELECTRICAL: All units wired with ballastsincorporating class “P” thermal protection, 120volts AC, 60 Hz standard (other voltagesavailable), and class “A” sound rating. Ballasts mounted in direct contact with housing formaximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface orpendant mounted.
FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistantpowder urethane polyester coating, electrostaticapplied and baked at 375° F. White enamelstandard. Custom colors available, consultfactory.
LABELS: U/L and I.B.E.W.
*Other lamp and ballast configurations available, consult factory.
09/08
Specifications subject to change without notice.
ORDERING INFORMATION: Example HIF240—F
Lamp Type
HIF
Series
HIF
No. of Lamps2 - Two lamps4 - Four lamps
Options40 - 2’, T5TT, 40 watt55 - 2’, T5TT, 55 watt B1—Battery Pack
F—FusingRM—Remote mounted ballast
-
3.50
72
Options and AccessoriesRecessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice
Louver OptionsTo Order the Following Diffusers Add to Catalog Number
Plastics Louvers
Silver White
Prismatic Acrylic #12 Pattern A
Prismatic Acrylic #12 Pattern .125 P
Matte White Acrylic MWA
Specular Parabolic Louver ½"x½"x½" SP1
Specular Parabolic Louver ¾"x¾"x 3/8" SP5
Specular Parabolic Louver 1½"x1½"x1" SP2
Matte White Dished Acrylic RH
White Cubed Acrylic Louver ½"x½"x3/8" PLA
Parallel Blade Louver ¾" deep x 2" spacing
PBMA
Parallel Blade Louver 1½" x 2" spacing PBLA
Aluminum 3" x 3" x 1½" PLLA
PopularLouverOptions
PBLA
PLLASP2
Code Description
W 277 volt
B1 Emergency Battery Pack
BX-39 Biax ballast, 39 watt
BX-40 Biax ballast, 40 watt
BX-55 Biax ballast, 55 watt (high output)
HLO High Lumen Output
RLO Reduced Lumen Output
UNV Universal voltage
Ballast Options
Please note: Diffusers for 4x4 fixtures are standard in 2 pieces with a center mullion. To special order a one piece 4x4 diffuser, specify“1 piece” at end of catalog number.
Code Description
H3 6' whip with 3-#14 THHN leads & 2 connectors
RA Regressed painted white aluminum frame
SR Enhancement reflector
Other ballast options available, consult factory for details.
09/08
73
74
Model NumberWhite Enamel
Model NumberWalnut Grained
Vinyl
Numberof Lamps
BallastType
NominalLength
WHOT9917 W-2 HOT9917W-2 2-17W T8/SSB 24¼"
WHOQH9925-W2 HOQH9925-W2 2-25W T8/SSB 36¼”
WHOQH9932W-2 HOQH9932W-2 2-32W T8/SSB 48¼”
Comforay Series Electronic T8/SSB
Designer
OPTIONS & ACCESSORIES
Code Description
G night light
K grounded convenience outlet
B1 emergency battery pack
R night light pull chain switch installed
SPECIFICATIONS:
HOUSING Channel and cover are heavy gauge steel. End plates are of die cast aluminum alloy.
REFLECTOR: Available in white enamel, or walnut grained vinyl-on-metal. Metal reflector locks in place without visible means of support.
FINISH: For improved paint adhesion and rust resistance, all metal parts are cleaned by a multi-stage process and treated with iron phosphatecoating. Housing, cover and reflector are electrostatically sprayed with white enamel at minimum of 88% reflectivity. End plates are finished in heavy white enamel.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC current only. Ballasts mounted in direct contact with housing for maximum heat dissipation. Socketscompletely wired and mounted. Fixture controlled by two-circuit pull chain switch, standard.
INSTALLATION: Units may be surface mounted.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Please note: Specifications subject to change without notice.
75
Model NumberWhite Enamel
Model NumberWalnut-Grained
Vinyl
Numberof Lamps
BallastType
NominalLength
WTH9917W ……. 1-17W SSB/T8 24-1/4”WTH9917W-2 TH9917W-2 2-17W SSB/T8 24-1/4”WQH9925W QH9925W 1-25W SSB/T8 36-1/4”WQ9925W-2 Q9925W-2 2-25W SSB/T8 36-1/4”
WQH9932W QH9932W 1-32W SSB/T8 48-1/4”WQ9932W-2 Q9932W-2 2-32W SSB/T8 48-1/4”
Décor-Ray Series Electronic T8/SSB
Designer
OPTIONS & ACCESSORIES
Code Description
G night light
K grounded convenience outlet
R single circuit pull chain
SPECIFICATIONS:
HOUSING Channel and cover are heavy gauge steel.
REFLECTOR: Available in white enamel, or walnut grained vinyl-on-metal. Metal reflector locks in place without visible means of support.
FINISH: For improved paint adhesion and rust resistance, all metal parts are cleaned by a multi-stageprocess and treated with iron phosphate coating. Housing, cover and reflector are electrostatically sprayed with white enamel at minimum of 88% reflectivity.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Please note: Specifications subject to change without notice.
76
Model NumberWhite Enamel
Model NumberWalnut-Grained
Vinyl
Number of Lamps
BallastType
NominalLength
WT6115-S T6115-S 1-15W SSB/T12 18¼”
Square-Deelite Series Electronic T12 & T8/SSB
Designer
OPTIONS & ACCESSORIESCode Description Code DescriptionG night light MW (suffix) smooth white plasticK grounded convenience outlet WD walnut grain vinyl on metal–
front baffleM turn knob WWD white front baffleR pull chain 6200 coupler for continuous rowsB1 emergency battery pack
SPECIFICATIONS:HOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: Choice of acrylic prismatic or acrylic white diffuser for soft & even glare-free illumination. Easily installed and removed.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.For continuous row installation, specify number of fixtures per row.
LABELS: U/L and I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Please note: Specifications subject to change without notice.
ModelNumber
White Enamel
Model NumberWalnut-Grained
Vinyl
Number of Lamps
BallastType
NominalLength
WT6117 T6117 1-17W SSB/T8 24¼”WQ6125 Q6125 1-25W SSB/T8 36¼”WQ6132 Q6132 1-32W SSB/T8 48¼”WT6217 T6217 2-17W SSB/T8 24¼”WQ6225 Q6225 2-25W SSB/T8 36¼”WQ6232 Q6232 2-32W SSB/T8 48¼”
For flat white acrylic diffuser, suffix catalog number with “MW.”
Square-Deeliteend view
Acrylicprismatic diffuser
77
Model NumberWhite Enamel
Model NumberWalnut-GrainedVinyl Ends
Number of Lamps
BallastType
NominalLength
WHOT6217 HOT6217 2-17W T8/SSB 24¼”WHOQH6225 HOQH6225 2-25W T8/SSB 36¼”WHOQH6232 HOQH6232 2-32W T8/SSB 48¼”
Directoray ElectronicT12 & T8/SSB
Designer
OPTIONS & ACCESSORIESCode DescriptionG night lightM night light switch (turn knob)R night light switch (pull chain)
FEATURES
• Upward control for soft indirect room lighting
• Downward control for reading
• Two-circuit pull chain switch– upward, downward, upward/downward, off (standard)
SPECIFICATIONS:
HOUSING: Channel and cover are heavy gauge steel.
FRONT BAFFLE: White or walnut grained vinyl-on metal which slides in place and is secured by end plates.
SHIELDING: Acrylic prismatic diffuser for soft and even glare-freeillumination. Easily installed and removed.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesion and rust resistance.
ELECTRICAL: All units wired with "A" sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballastsmounted in direct contact with housing for maximum heat dissipation.Sockets completely wired. Two circuit pull chain sw itch, standard.
INSTALLATION: Units may be surface mounted.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
5/02
Please note: Specifications subject to change without notice.
30 WATT
20 WATT
7/8” KNOCKOUTS
LAMP-DIVIDER-SHIELD CONTROLS UPWARD AND DOWNWARD DIREC-TION OF LIGHT
ACRYLIC PRISMATIC DIFFUSER
78
Model NumberWhite Enamel
Model NumberWalnut-GrainedVinyl
Number of Lamps
BallastType
NominalLength
WHOQH 6325 HOQH 6325 3-25W SSB/T8 36-1/4"WHOQH 6332 HOQH 6332 3-32W SSB/T8 48-1/4"WHOQH 6425 HOQH 6425 4-25W SSB/T8 36-1/4"WHOQH 6432 HOQH 6432 4-32W SSB/T8 48-1/4"
Big “D” Directoray Electronic T8/SSB
Designer
OPTIONS & ACCESSORIESCode DescriptionG night lightK grounded convenience outletM night light switch (turn knob)R night light switch (pull chain)
SPECIFICATIONS:
HOUSING: Channel and cover are heavy gauge white enamelsteel.
SHIELDING: Acrylic prismatic diffuser for soft and even glare-freeillumination. Easily installed and removed.
FRONT BAFFLE: Slides in place and is secured by end plates.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesionand rust resistance.
ELECTRICAL: All units wired with "A" sound rated ballasts,incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing formaximum heat dissipation. Sockets completely wired and mounted. Two circuit pull chain switch, standard.
INSTALLATION: Units may be surface mounted.
LABELS: U/L combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Please note: Specifications subject to change without notice.
79
Acrylic Round I Series Twin Tube
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Is of sturdy construction, finished in high reflectance postpainted white enamel for superior durability and lighting performance.Features an ultra shallow backplate with simple twist-on diffuser mounting with no hardware visible. Units have white finished mounting pans and retaining screws for diffuser support.
SHIELDING: Featuring a white translucent, seamless diffuser molded of cast acrylic material.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an electrostatically sprayed white enamel baked at 320° F. Minimum of 90% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation.
LABELS: U/L and I.B.E.W.
STANDARDSTYLE
SAUCERSTYLE
MUSHROOMSTYLE
ModelNumber
Numberof Lamps
BallastType
HousingDiameter
PA1019 1-PL9 RS/LPF 10"PA1029 2-PL9 RS/LPF 10"PA1013 1-PL13 RS/LPF 10"PA1319 1-PL9 RS/LPF 12¾"PA1329 2-PL9 RS/LPF 12¾"PA1339 3-PL9 RS/LPF 12¾"PA1313 1-PL13 RS/LPF 12¾"PA13213 2-PL13 RS/LPF 12¾"PA13213-S 2-PL13 SSB 12¾"PA13226-S 2-QUAD 26 SSB 12¾"PA17313-S 3-PL13 SSB 17”
OPTIONS & ACCESSORIESCode DescriptionS (prefix) Saucer style plasticM (prefix) Mushroom style plasticPOLY Polycarbonate lens (standard style only)S SSB (Electronic)
6/08
80
Acrylic Round I I Series Circline
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Is of sturdy construction, finished in high reflectance post painted white enamel for superior durability and lighting performance.Features an ultra shallow backplate with simple twist-on diffusermounting with no hardware visible. Units have white finishedmounting pans and retaining screws for diffuser support.
SHIELDING: Featuring a white translucent, seamless diffuser molded of cast acrylic material.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an electrostatically sprayed white enamel baked at 320° F. Minimum of 90% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation.
LABELS: U/L and I.B.E.W.
STANDARDSTYLE
SAUCERSTYLE
MUSHROOMSTYLE
ModelNumber
Numberof Lamps
BallastType
HousingDiameter
PA22-S 1-22W SSB 10”
PA32-S 1-32W SSB 12¾"
PA40-S 1-40W SSB 17”
PA54-S 1-22W,1-32W SSB 12¾”
PA72-S 1-32W, 1-40W SSB 17”
OPTIONS & ACCESSORIES
Code Description
S (prefix) Saucer style plastic
M (prefix) Mushroom style plastic
POLY Polycarbonate lens (standard style only)
S SSB (electronic)
6/08
81
-Lamp Configuration
22 - (1) 22 watt113 - (1) PL13213 - (2) PL13313 - (3) PL1354 - (1) 22 watt and (1) 32 watt
LPR
Series Housing Size(in inches)
131621
Housing Finish
N - Polished NickelW - WhiteB - Polished Brass
W - White acrylicP - Prismatic acrylic
Diffuser Options
S - SSB
Ballast Options
Low Profile Round Series Twin Tube & Circline
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
This attractive fixture series consists of a housing which is stamped and spun, creating a floating effect on the mounting surface. This effect is further reinforced with the utilization of a shallow dome diffuser, in either white or clear prismatic. The diffusers mount to the fixture housing with the use of three spring clips, which compress the flange on the diffuser inside the fixture housing. The diffusers are constructed of 50% acrylic and 50% DR acrylic to allow the ease of mounting and accessibility of the diffuser to the housing.
Size A B C D LampingOptions
13” 11-7/8” 9-7/16” 12-13/16” 3” 1 or 2 PL-13/22w circline
17” 15-3/8” 13” 16” 3-5/8” 2 or 3 PL 13/22-32w circline
21” 19-5/8” 17” 20-11/16” 4” 32-40 w circline
ORDERING INFORMATION example LPR13213NW-W
09/08
82
Acrylic Square Series RS, LPF,Electronic SSB
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Is of sturdy construction, finished in high reflectance post painted white enamel for superiordurability and lighting performance. Features an ultra shallow backplate with simple latching system for easy servicing, no tools required.
FINISH: All metal parts are cleansed by a multi -stageprocess and treated with an electrostatically sprayed whiteenamel baked at 320ºF. Minimum of 90% reflectivity.
SHIELDING: Featuring a white translucent, seamless diffuser molded of extruded acrylic material.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation.
LABELS: U/L and I.B.E.W.
Ordering Information
MODEL No. NUMBER OF LAMPS
BALLASTTYPE
DIMENSIONA
DIMENSIONB
DIMENSIONC
WPC22-S 1-22W SSB 12" 10-7/8" 2-5/8"
WPC32-S 1-32W SSB 14-1/2" 13-1/16" 2-3/4"
WPC54-S 1-22W & 1-32W
SSB 14-1/2" 13-1/16" 2-3/4"
WPC72-S 1-32W & 1-40W
SSB 19-1/2" 18-1/4" 2-7/8"
6/08
83
Circline Series Electronic RS, LPF, SSB
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Entire construction is of code gauge die formed steel.
FINISH: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating.
HARDWARE: All hardware furnished for simple mounting to existing outlet boxes.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Surface mounted only.
LABELS: U/L combined with I.B.E.W.
Ordering Information
MODEL NUMBERNUMBER OF
LAMPSBALLAST
TYPEDIAMETER
WHITE CHROME
W22 …... 1-22W RS, LPF 8”
W32-S …... 1-32W SSB 12”
W54-S …... 1-22W, 1-32W SSB 12”
6/08
84
Cloudlume Wall Bracket Electronic T8 & T12/SSB
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Body is die-formed of code gauge steel construction and uniformity.
SHIELDING: Lenses are formed white acrylic.
FINISH: All metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballastsincorporating Class P thermal protection, for 120 volt 60 cycle AC. Other voltages available. Ballastsmounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually.
LABELS: U/L and I.B.E.W.
Ordering Information
ModelNumber
Numberof
Lamps
BallastType
NominalSize
Opening
CB217 2-17W SSB/T8 6” x 26-3/4” 4-5/8”x24-1/4”
CB220-S 2-20W SSB/T12 6” x 26-3/4” 4-5/8”x24-1/4”
CB225 2-25W SSB/T8 6” x 38-3/4” 4-5/8”x36-1/4”
CB230-S 2-30W SSB/T12 6” x 38-3/4” 4-5/8”x36-1/4”
CB232 2-32W SSB/T8 6” x 50-3/4” 4-5/8”x48-1/4”
CB240-S 2-40W SSB/T12 6” x 50-3/4” 4-5/8”x48-1/4”
Options: B1– Emergency Battery Pack.
6/08
85
2-7/8” K.O. on all brackets.1-7/8” K.O.
3½” 1-1/16” 3/16” MTG. HOLES
3/16”
Model Number Number of Lamps
BallastType
NominalLength
White Chrome
WT9015-S T9015-S 1-15W SSB/T12 18¼”
WT9017 T9017 1-17W SSB/T8 24¼”
WT9020-S T9020-S 1-20W SSB/T12 24¼”
WT9215-S T9215-S 2-15W SSB/T12 18¼”
WT9217 T9217 2-17W SSB/T8 24¼”
WT9220-S T9220-S 2-20W SSB/T12 24¼”
WQ9225 Q9225 2-25W SSB/T8 36¼”
WQ9232 Q9232 2-32W SSB/T8 48¼”
SPECIFICATIONS:
HOUSING: Entire construction rigidly die formed code gauge steel.
SHIELDING: One piece white acrylic diffuser for soft and even glare-free illumination. Easily installed and removable for re-lamping.
FINISH: All reflecting metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F. Minimum, of 88% reflectivity. Exposed metal parts are finished in a lustrous, rust-resistant mirror-like chromium.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
More-Lite Series Electronic T8 & T12/SSB
Designer
Please note: Specifications subject to change without notice.
OPTIONS & ACCESSORIES(Accessories rated for use with 120 volt ballast only.)
Code Description
9200 Coupler for continuous rows
B1 Emergency battery pack
K Grounded convenience outlet
M Turn knob switch
R Pull chain switch
5- 3/16”
3- 5/16”
3– 3/16”
3– 13/16”
DIFFUSER SMOOTH WHITE VIRGIN ACRYLIC
86
Big “D” Highlighter Electronic T8/SSB
Designer
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formed of code gauge steel.Aperture top for soft indirect lighting.
SHIELDING: One-piece, .125 light -stabilized, virgin acrylic, prismaticdiffuser for soft and even glare-free illumination. Easily installed and removed.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F.
ELECTRICAL: All units wired with A sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cy cle AC current. Ballast mounted in direct contact with housing for maximum heat dissipation.Sockets completely wired and mounted.
INSTALLATION: Units may be surface or wall mounted, individually or in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
6-7/8"
2-7/8"
7/8" K.O.
1-13/16"
END
MODEL NUMBERNumberof Lamps
BallastType
NominalLengthSlotted
TopSolidTop
H5117 H3117 1-17W SSB/T8 24-3/8”
H5125 H3125 1-25W SSB/T8 36-3/8”
H5132 H3132 1-32W SSB/T8 48-3/8”
H5217 H3217 2-17W SSB/T8 24-3/8”
H5225 H3225 2-25W SSB/T8 36-3/8”
H5232 H3232 2-32W SSB/T8 48-3/8”
Model Number
Description
H3232-M-2B 2 lamps switched individually with 2 circuit turn knob switch offering flexi-bility of high and low light levels
New
Accessories
Model Number Description
K convenience outlet
N rocker switch
Diffuser Snaps
87
Model Number
WHITE CHROME
Numberof Lamps
BallastType
NominalLength
WT9115-S T9115-S 1-15W SSB/T12 18¼”
WT9120-S T9120-S 1-20W SSB/T12 24¼”
WQ9125 Q9125 1-25W SSB/T8 36¼”
WQ9130-S Q9130-S 1-30W SSB/T12 36¼”
WQ9132 Q9132 1-332W SSB/T8 48¼”
WQ9140-S Q9140-S 1-40W SSB/T12 48¼”
WT9117 T9117 1-17W SSB/T8 24¼”
SPECIFICATIONS:
HOUSING: Entire construction is of die-formed code gauge steel.
SHIELDING: One piece ribbed white acrylic diffuser for soft and even glare-free illumination. Easily removable for re-lamping.
FINISH: All reflecting metal parts are c leansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F. Minimum, of 88% reflectivity.Exposed metal parts are finished in a lustrous, rust-resistant mirror-like chromium.
ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Hanover Electronic T8 & T12/SSB
Designer
Please note: Specifications subject to change without notice.
BACK
END
DIFFUSER
¾ DIA. K.O.
1-1/8 SQ.3 WIRE C.O.EACH END
SIZE LENGTH
14W 15¼”
15W 18¼”
20W 24¼”
30W 36¼”
40W 48¼”
OPTIONS & ACCESSORIES
Code Description
9100 Coupler for continuous rows
K Grounded convenience outlet
W (suffix) 277 volt
M Turn knob switch
B1 Emergency battery pack
S Electronic ballast
Accessories rated for use with 120 volt ballast only.
88
Cora Lume Electronic T8 &T12/SSB,HO
Designer
SPECIFICATIONS
HOUSING: Die formed of code gauge steel.
SHIELDING: Standard lens is flat prismatic acrylic .125. Other lenses available on request.
FINISH: High reflective baked white enamel.
ELECTRICAL: All units with ballasts incorporating class Pthermal protection, for 120 volt, 60 cycle AC. Ballastsmounted in direct contact with housing for maximum heat dissipation.
INSTALLATION: Surface mounted, individually or incontinuous rows.
LABELS: U/L and I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Options & Accessories Model Number DescriptionB1 Emergency Battery Pack
Model Number Number of Lamps
BallastType
NominalLength
CL117 1-17W SSB/T8 2’CL217 2-17W SSB/T8 2’CL125 1-25W SSB/T8 3’CL225 2-25W SSB/T8 3’CL132 1-32W SSB/T8 4’CL232 2-32W SSB/T8 4’
Model Number Number of Lamps
Ballast Type NominalLength
CL248-8-S 2-60W SSB/T12 HO 4’CL244-8 2-44W SSB/T8 HO 4’
(6) 3/8” DIA HOLES
Note: 3 lamp models may be available on special order. Consult factory.
T8 Electronic
T8 &T12 High Output
89
Deco-Lume Electronic T12 & T8 /SSB
Designer
SPECIFICATIONSHOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: Acrylic white diffuser for soft and even glare-freeillumination. Easily installed and removable for re-lamping.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows. Specify number of fixtures per row when installed in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Options & Accessories Model Number DescriptionB1 Emergency Battery Pack
Model Number Number of Lamps
Ballast Type NominalLength
WT8115-S 1-15W SSB/T12 18¼”WT8120-S 1-20W SSB/T12 24¼”
WQ8140-S 1-40W SSB/T12 48¼”WQ8130-S 1-30W SSB/T12 36¼”
Model Number Number of Lamps
Ballast Type NominalLength
WTH8117 1-17W SSB/T8 24¼”WQH8125 1-25W SSB/T8 36¼”WQH8132 1-32W SSB/T8 48¼”
2½”
4¼”
BACK
90
Chrome Bracket Series Electronic T12/SSB
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Code gauge steel, die formed and welded construction.
SHIELDING: Chrome steel, swivel reflectors areoptional.
FINISH: Exposed metal parts are finished in lustrous, mirror-like chromium.
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating class P thermal protection, for 120 volt, 60 cycle. Other voltages available. Ballasts mounted in direct contact with housing formaximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surfacemounted, with metal black plate first fastened to wall or outlet box. Wire connection is then made and channel is mounted to retainer brackets on back plate.
LABELS: U/L combined with I.B.E.W
Ordering Information
MODELNUMBER
NUMBER OF LAMPS
BALLAST TYPE
NOMINALLENGTH
QC130-S 1-30W SSB 37"
QC140-S 1-40W SSB 49"
6/08
Swivel Reflectors—Optional
Model NumberChrome
Number of Lamps
NominalLength
R140 1-40W 49"
ModelNumber
Description
K Grounded convenience outlet
M Turn knob switch
Accessories
91
Stilite Electronic T12 & T8/SSB
Designer
SPECIFICATIONS
HOUSING: Entire construction rigidly die-formedof code gauge steel.
SHIELDING: Acrylic white diffuser for soft and even glare-free illumination. Easily installed and removable for re-lamping.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows. Specify number of fixtures per row when installed in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/08
Model Number Number of Lamps
BallastType
NominalLength
T7115-S 1-15W T12/SSB 18¼”T7120-S 1-20W T12/SSB 24¼”T7215-S 2-15W T12/SSB 18¼”T7220-S 2-20W T12/SSB 24¼”
OPTIONS & ACCESSORIESCode DescriptionK grounded convenience outletR pull chainB1 emergency battery pack
Accessories rated for use with 120 volt ballast only.
Model Number Number of Lamps
BallastType
NominalLength
T7117 1-17W T8/SSB 24¼”T7217 2-17W T8/SSB 24¼”Q7125 1-25W T8/SSB 36¼”Q7225 2-25W T8/SSB 36¼”Q7132 1-32W T8/SSB 48¼”
Q7232 2-32W T8/SSB 48¼”
For chrome finish, prefix model number with “C.”
T12 Electronic
T8 Electronic
92
Stilite Dimensional Data
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
1 & 2 LIGHTS WITH SMOOTH WHITE ACRYLIC PLASTIC DIFFUSER
93
94
The Success
Since the introduction of the ENERGY STAR label, Americans have purchased more than 1.5 billion Products carrying that mark and improved the efficiency of thousands of buildings and homes. AS a nation we have prevented greenhouse gas emissions equivalent of those from 20 million vehicles. Over this time the public has become more aware of and interested In energy efficiency, ENERGY STAR , and protecting the environment issue , particularly air pollution and global warming. Many consumers want to know what they can do to save Energy and protect the environment and believe that products that address energy and environmental issues are desirable.
In addition, we provide alternative products using LED technology.
DURAY FLUORESCENT MANUFACTURING COMPANY2050 W. BALMORAL AVE.
PHONE 773 271-2800 FAX 773 271-4410
Meets or Exceeds Energy Star Requirements Please review attachments on our ES series
Energy Saver Products
02/10
We are pleased to offer the following:
9595
6¼"
3-3/16"
4-5/8"
9-3/16"
4" 10" 8-7/8" KO 4"
48"
24"
12" 2-7/8" KO
Energy Saver Wraparound T5, T5HO, T8
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
03/10
SPECIFICATIONS
HOUSING: Entire construction rigidly die formed of code gauge steel with deep rib-reinforcing formations assuring accuratealignment and sturdy installation
SHIELDING: Single piece light stabilized prismatic lens in virgin acrylic. 5/32” convex hexagon prisms on bottom opticallyengineered for controlled low brightness. Linear striations on sides designed to refract light upward while adding to overall attractiveness and streamlined appearance. Hinged along its entire length on both sides for maximum flexibility. Destaticized to inhibit dirt accumulation.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows.
LABELS: U/L listed combined with I.B.E.W.
ORDERING INFORMATION: Example ESNN232-120V
ESNN
Series
ESNN
No. of Lamps
2 - Two lamps
Other lamp and ballast options available. Please consult factory.
Lamp Type
14 - 2’, T5, 14 watt28 - 4’, T5, 28 watt24 - 2’, T5, HO, 24 watt54 - 4’ T5, HO, 54 watt
17 - 2’, T8, 17 watt32 - 4’, T8, 32 watt
Meets or Exceeds Energy Star Requirements
B1 - Emergency BallastF - FusingLED - Consult Factory
Options120 volt only
196
Energy Saver Cloud Series Electronic T8/SSB
Surface
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
03/10
SPECIFICATIONS:
HOUSING: Body is die-formed of code gauge steel construction and designed for maximum strength and uniformity.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
SHIELDING: Lenses are formed white acrylic.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface or pendent mountedindividually.
LABELS: U/L combined with I.B.E.W.
Aluminum housing available on special order.
ESC
Series
ESC
ORDERING INFORMATION: Example ESC232
No. of Lamps
2 - Two lamps4 - Four lamps
Lamp Type
28 - T5, 28 watt32 - T8, 32 watt
Meets or Exceeds Energy Star Requirements
A
C
B
12-3/4"
48"
2-1/4" K.O.5/8" K.O.
7/8" K.O.
5-1/4"
5"19" 1-3/4"
48"
7-1/4"
6"
7/8" K.O.
OptionsB1– Battery packF - FusingLED - Consult Factory
NO.LAMPS
Dimensions
A B C
2 11¾” 52" 4¾"
4 17" 52" 4¾"
297
Energy Saver Strips T5, T5HO, T8
Strips
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
03/10
ES
SpecificationsHousing: Channel, cover and ends are of code gauge, die formed painted white steel construction. Dual purpose end plates act as a coupler for continuous row mounting. All chassis components snap into place without screws.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation.
Labels: U/L listed and I.B.E.W.
ESX
ESXS
All K.O. 7/8”AVAILABLE IN: 1 LIGHT OR 2 LIGHT
ORDERING INFORMATION: Example ES125– 120V
ES ESX ESXS
Series
1 - Lamp2 - Lamps
Number of lamps14 - 2’, T5, 14 watt21 - 3’, T5, 21 watt28 - 4’, T5, 28 watt
24 - 2’, T5, HO, 24 watt39 - 3’, T5, HO, 39 watt54 - 4’, T5, HO, 54 watt
17 - 2’, T8, 17 watt25 - 3', T8, 25, watt32 - 4', T8, 32 watt
Lamp Type
B1- Emergency BallastF - FusingSPTW6’ - 6’ Cord/plug WhiteLED - Consult Factory
Options 120 volt only
Meets or Exceeds Energy Star Requirements
1-7/8”
398
Energy Saver UC T5 Electronic
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
3/16" DIA. K.O. (3)MOUNTING HOLES (2)
1/2" DIA. K.O.
7/16" DIA. K.O.
1" SQ. K.O.9/16" x 1-1/8" K.O.
Bottom Without Diffuser
Back
3/16" DIA. K.O. 7/8" DIA. K.O.
1"
5"
Accessories rated for 120 volt ballast.Additional options and accessories available. Contact factory for details.
01/10
ESUC
Series
ESUC
No. of 1 - One lamp
ORDERING INFORMATION: Example ESUC114-SPTW6’
F - FusingK - Ground Convenience OutletN - Rocker Switch Installed (White)SPTW6’- 6’ Cord/Plug/WhiteLED - Consult Factory
Options120 volt only
PROPRIETARY NOTEExcept for uses expressly granted in writing, information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co.Specification subject to change without notice.
Specifications
HOUSING: Entire construction rigidly die formed of code gauge steel.
SHIELDING: White ribbed acrylic diffuser easily installed and removable by finger pressure.
FINISH: High gloss white enamel.
ELECTRICAL: All units wired with "A" sound rated ballasts incorporating Class P thermal protection, for 120 vold, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually or in continuous rows.
LABELS: U/L and I.B.E.W.
Lamp Type
14 - 2', T5, 14 watt21 - 3', T5, 21 watt28 - 4', T5, 28 watt
Meets or Exceeds Energy Star Requirements
499
1
SPECIFICATIONS:HOUSING: Entire construction rigidly die-formed of code gauge steel.
SHIELDING: Choice of acrylic prismatic or acrylic white diffuser for soft & even glare-free illumination. Easily installed and removed.
FINISH: All metal parts are cleansed by a multi-stage process and treatedwith an iron phosphate coating to improve paint adhesion and rustresistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted.
INSTALLATION: Units may be surface mounted, individually or incontinuous rows on ceiling or wall. For continuous row installation, specify number of fixtures per row.
LABELS: U/L and I.B.E.W.
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410
02/10
Please note: Specifications subject to change without notice.
end view Acrylicprismatic diffuser
ORDERING INFORMATION: Example ES6217-R
Series
ES6
ES6
No. of 1 - One lamp2 - Two lamps
Options120 volt only
B1 - Battery PackF - FusingG - Night LightK - Grounded Convenience Outlet R - Pull ChainLED - Consult Factory
Lamp Type
14 - T5, 14 watt21 - T5, 21 watt28 - T5, 28 watt24 - T5, HO, 24 watt39 - T5, HO, 39 watt54 - T5, HO, 54 watt
17 - ,T8,17 watt25 - T8, 25 watt32 - T8, 32 watt
AccessoriesCode Description
WWD White front baffle6200 Coupler for continuous rows
MW (suffix) Smooth white plastic
Energy Saver Square Wrap T5, T5HO, & T8/SSB
Designer
Meets or Exceeds Energy Star Requirements
5100
Energy Saver Cloud II T8 /SSB
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
03/10
ESCB
Series
ESCB
ORDERING INFORMATION: Example ESCB217
No. of 1 - One lamp2 - Two lamps
Lamp Type
14 - T5, 14 watt21 - T5, 21 watt28 - T5, 28 watt
17 - T8, 17 watt25 - T8, 25 watt32 - T8, 32 watt Meets or Exceeds Energy Star Requirements
SPECIFICATIONS
HOUSING: Body is die-formed of code gauge steel construction and uniformity.
SHIELDING: Lenses are 6” wide formed white acrylic.
FINISH: All metal parts are cleansed by a multi-stageprocess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, thenelectrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity.
ELECTRICAL: All units wired with ballastsincorporating Class P thermal protection, for 120 volt 60 cycle AC. Other voltages available. Ballastsmounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
INSTALLATION: Units may be surface mounted, individually on ceiling or wall.
LABELS: U/L and I.B.E.W.
B1 - Battery PackF - FusingLED - Consult Factory
Options120 volt only
6101
Energy Saver Acrylic Round Twin Tube/Circline
Designer
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
SPECIFICATIONS
HOUSING: Is of sturdy construction, finished in high reflectance postpainted white enamel for superior durability and lighting performance.Features an ultra shallow backplate with simple twist-on diffuser mounting with no hardware visible. Units have white finished mounting pans and retaining screws for diffuser support.
SHIELDING: Featuring a white translucent, seamless diffuser molded of cast acrylic material.
FINISH: All metal parts are cleansed by a multi-stage process and treated with an electrostatically sprayed white enamel baked at 320° F. Minimum of 90% reflectivity.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation.
INSTALLATION: Units may be surface mounted, individually on ceiling or wall.
LABELS: U/L and I.B.E.W.
STANDARD*STYLEESPA
SAUCERSTYLEESSPA
MUSHROOMSTYLEESMPA
4/10
Series
ORDERING INFORMATION: Example ESPA13226-S
No. & Type of Lamps
1 - PL13, 13”2 - PL13, 13”3 - PL13, 17”2-QUAD 26, 13”1-22 – 22 watt, T9, Circline 10”1-32 – 32 watt, T9, Circline 13”LED - Consult Factory
ESPAESSPAESMPAESPOLY
ESP
10” 13” 17”
Size
Meets or Exceeds Energy Star Requirements
Polycarbonate lens (standard style only)*
7102
Energy Saver Reflector T5, T5HO, T8
Industrial
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
ORDERING INFORMATION: Example ESQ11232
Specifications
Housing: Channel die formed of code gauge steel. Dual-purposeend plates act as coupler for continuous row mounting. All chassis components snap into place without screws.
Reflector: white enamel reflector 48” long, die formed and cross-ribbed for added rigidity. 10% uplite is optional. Only one fastener secures reflector; other side slides into position.
Electrical: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Othervoltages available. Ballasts mounted in direct contact withhousing for maximum heat dissipation. Sockets completely wired.
Installation: Units may be surface or pendant mounted,individually or in continuous rows.
Labels: U/L combined with I.B.E.W.
Series:
ESQ11- Closed Refl. 4’EST11- Closed Refl. 2’ESU11- Uplight Refl. 4’
Numberof lamps
Lamp Type
14 - 2', T5, 14 watt28 - 4', T5, 28 watt
24 - 2', T5HO, 24 watt54 - 4', T5HO, 54 watt
17 - 2', T8, 17 watt32 - 4', T8, 32 watt
Options120 volt only
B1 - Battery pack ENH - 95% Enhanced aluminum reflectorWG11 - 11” wire guardLED - Consult Factory
1 - One2 - Two
4/10
Meets or Exceeds Energy Star Requirements
Specifications subject to change without notice
8
103
Energy Saver Pre-Wired Electronic/Starter Type
Task
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
Specifications subject to change without notice.
Model Number Number of Lamps
Ballast Type NominalLength
ESPMUC115-S 1-15W Electronic 18-1/8"
OPTIONS & ACCESSORIES
CODE DESCRIPTION
L Lamp installed (1-F15T8CW)
R Pull chain
Accessories rated for use with 120 volt ballast only.
Chrome, Oak or Walnut finish available on special order. Consult factory.
SPECIFICATIONS
Housing: Entire construction rigidly die-formed of code gauge steel.
Shielding: One piece light stabilized white translucent acrylic diffuser for soft and even glare-free illumination. Easily in-stalled and removable by finger pressure.
Finish: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating.
Electrical: All units wired with UL Approved ballasts for 120 volt, 60 cycle AC current only. Ballasts mounted in direct con-tact with housing for maximum heat dissipation.
Installation: Units may be surface mounted, individually or in continuous rows. Prepunched holes in body facilitate quick mounting to ceiling outlet boxes.
Labels: U/L combined with I.B.E.W.
ORDERING INFORMATION
9”
4.5”
18”
1.25”
6/10
Meets or Exceeds Energy Star Requirements
9
LED option Consult Factory
104
1
Energy Saver Value-Ray T5, T5HO, T8 SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
06/10
ORDERING INFORMATION: Example ESVP24332-18-B1
Lamp Type
14 - 14W, 2’, T528 - 28W, 4', T524 - 24W, 2’, T5HO54 - 54W, 4', T5HO
17 - 17W, 2’, T832 - 32W, 28W,25W 4’, T832U - 32W, 2’, T8
Number of Lamps
2 - Lamps3 - LampsESVP
Series Nom. Dimension
22 - 2X2’24 - 2’x4’
No. of Cells
Options120 volt only
B1—Emergency Ballast2B– Two ballastsCP—Chicago PlenumLED - Consult Factory
Specifications subject to change without notice.
2 X 2— 9 CELL2 X 4— 18 CELL
24”
ESVP
918
Specifications
Housing: Body of die-formed code gauge steel construc-tion and designed for maximum strength.
Louver: Nominal 2” deep aluminum louver consists of a cellular assembly of inter connecting wedge-shaped baf-fles.
Finish: All metal parts are cleansed by a multi-stage proc-ess and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320º F. Minimum of 88% reflectivity.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current.Ballasts mounted in direct contact with housing for maxi-mum heat dissipation. Sockets completely wired.
Installation: Units are recessed mounted, in inverted T-Grid ceiling system, individually or in continuous rows.Louver can be removed without tools.
Labels: U/L listed combined with I.B.E.W. 3¾
Meets or Exceeds Energy Star Requirements
10
105
Energy Saver Shallolume T5, T5HO, T8 SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
6/10
ORDERING INFORMATION: Example ESLE24332-18-B1
Lamp Type
14 - 14W, 2’, T528 - 28W, 4', T524 - 24W, 2’, T5HO54 - 54W, 4', T5HO
17 - 17W, 2’, T832 - 32W, 28W,25W 4’, T832U - 32W, 2’, T8
Number of Lamps
2 - Lamps3 - Lamps
ESLE
Series
ESLE
Nom. Dimension
24 - 2’x 4’
Options120 volt only
B1—Emergency Ballast2B– Two ballastsCP—Chicago PlenumLED - Consult Factory
Specifications subject to change without notice.
Meets or Exceeds Energy Star Requirements
Specifications
Housing: Body and hinged door frame are die-formed of code gauge steel construction and designed for maximum strength.Standard in-stock fixtures are 1’ x 4’, 2’ x 2’, and 2’ x 4’.
Shielding: See ordering data.
Finish: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320º F. Minimum of 88% reflectivity.
Electrical: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Installation: Units are recessed mounted, in inverted T-Gridceiling system, individually or in continuous rows. Lens frame can be hinged form either side and removed without tools.
Labels: U/L listed combined with I.B.E.W.
11106
Energy Saver Genesis Electronic T8/SSB
Recessed
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410 www.durayinc.com
PROPRIETARY NOTEExcept for uses expressly granted in writing information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co. Specifications subject to change without notice
SpecificationsHOUSING: 20 gauge cold rolled steel.
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
PERFORATED BAFFLE: White perforated metal basket. Optional white opal acrylic lens inlay.
LAMPS: 2 or 3 biax lamps.
FINISH: Low gloss, high reflectivity powder coat finish. Pre-treatedwith iron phosphate for superior paint adhesion.
MOUNTING: Standard troffer mounting for T-bar ceiling.
LABELS: U/L listed and I.B.E.W.
5-5/8"
23-3/4"
8"
3-1/8"
6/10
ORDERING INFORMATION: Example ESGEN24232
ESGEN
Series Nom. Dimen-2’ x 2’2’ x 4’ 2 - Lamps
3 - Lamps
Number of Lamp Type2-17 - 17W, SSB/T83-17 - 17W, SSB/T82-32 - 32W, SSB/T83-32 - 32W, SSB/T8
Options
LED - Consult Factory
Meets or Exceeds Energy Star Requirements
12
ESGEN
107
2009 Quick Reference Guide
Options & Accessories
Duray Fluorescent Manufacturing Company, Inc.To order, call (773) 271 -2800 or fax: (773) 271-4410
Code Description
A Prismatic flat acrylic lens
B1 Battery pack—750 Lumens
B5 Battery pack—1400 Lumens
C 10% THDD1 Dimming ballast 1 lamp - Advance MK10
D2 Dimming ballast 2 lamp - Advance MK10
D3 Dimming ballast 3 lamp - Advance MK10
D4 2 2 Lite dimming ballasts - Advance MK10
F Fusing
G Night light
H3 Whip—3 wire
HLO (prefix) High Lumen Output
J 6’ Black cord w/ inline switch
K Convenience outlet
L Lamp
M Turn knob switch
N Rocker switch
P Prismatic flat acrylic .125 lens
R Pull chainS Electronic ballast
PRO Program start ballast
UNV Universal voltage for SSB/T8
W 277 volt
Y Radio interference filter
38 Toggle switch
40 Connector for DUC series
Please Note:
1. Unless otherwise noted, all codes should follow a hyphen at the end of the catalog number. If ordering a fixture with more than one option or accessory, please write them in alphabetical order. For example:SPMUC115-LR.
2. CORD & PLUGS: 18 gauge, 3 conductor 105°. Purchase order must specify location of cord.
3. Accessories rated for 120 volt ballast.
4. When ordering lamps, please specify color.
Cords & plugsCord Configurator:Example: SPTW6' = Flat white 6' cord & plug
Cord Type Color Length
SPT - FlatSJT -Round
W - WhiteB - Black
3', 4', 5', 6', 7', 8', 9', 10'
108
Duray Fluorescent Manufacturing Company, Inc.2050 West Balmoral Avenue Chicago, Illinois 60625 Phone 773.271.2800 Fax 773.271.4410
www.durayinc.com
Lighting your waySINCE 1946