™DrinTecExperts in water remineralization

Upflow limestone contactors of constant height

for the remineralization of desalinated water

Catalogue

Limestone Contactors in vertical tanks

*May vary with permeate characteristics and water temperature

Diameter (mm)

Maximum height (mm)

Flow* (m3/d)

Material

600 3580 35 - 70 FRP (Hand lay-up)800 3580 60 - 130 FRP (Hand lay-up)

1000 3700 95 - 200 FRP (Hand lay-up)1200 3800 135 - 290 FRP (Hand lay-up)1380 3800 180 - 380 FRP (Hand lay-up)1625 3840 245 - 525 FRP (Hand lay-up)1200 5190 135 - 475 FRP (Winding) / Polypropylene1380 5210 180 - 630 FRP (Winding) / Polypropylene1625 5230 245 - 870 FRP (Winding) / Polypropylene2000 5300 370 - 1320 FRP (Winding) / Polypropylene2325 5310 500 - 1780 FRP (Winding) / Polypropylene2500 5350 580 - 2060 FRP (Winding) / Polypropylene

Characteristics • Pressure: Atmospheric / 2-6 bar • Internal paint: For drinking water

purpose • External paint: UV resistant • Manufacturing time: 10-12 weeks • Manufacturing standard: UNE-EN-13121

Width (m)

Length (m)

Flow* (m3/d)

2,02 5,02 1200 - 42552,03 5,03 1210 - 42852,02 6,02 1440 - 51003,02 6,02 2155 - 76303,02 7,02 2510 - 88953,03 7,03 2525 - 89353,33 7,03 2775 - 9820

4 8 3790 - 134255,02 9,4 5590 - 19795

Limestone Contactors in concrete cells

Characteristics • Pressure: Atmospheric • Internal parts delivered by DrinTec™:

• Underdrain floor • Modular spillways • Limestone feeding system

*May vary with permeate characteristics and water temperature

*May vary with permeate characteristics and water temperature

Downflow low-pressure CO2 Dissolver

Diameter (mm)

Flow* (m3/d)

Maximum height (mm)

MaterialManufacturing

technique

80 17-30 4000 PVC100 27-48 4000 PVC125 42-74 4000 PVC150 61-107 4000 PVC200 109-190 4000 PVC250 170-297 4000 PVC315 269-471 4000 PVC/FRP Hand lay-up400 434-760 4000 FRP Hand lay-up600 977-1710 5000 FRP Fillament winding800 1737-3040 5000 FRP Fillament winding1000 2714-4750 5000 FRP Fillament winding1200 3909-6840 5000 FRP Fillament winding1380 5169-9046 5000 FRP Fillament winding1625 7168-12543 5000 FRP Fillament winding2000 10857-19000 5000 FRP Fillament winding

Characteristics • Designed to maximise CO2

dissolution without overdosing. • Pressure: 2,5 bar • Manufacturing time: 6 weeks

What next? Contact us for more information at:

DrinTec™ Canary Islands Spain +34 922 00 60 30 administration@lcch.es www.drintec.com