Drilling tools &

Remedial Services

2

NewTech Services is a dynamic company aimed to have a leading position in oilfield equipment manufacturing, high-tech engineering and management services provision to companies in the oil and gas industry.

Company operating principles:

Introduction of effective advanced technologies

Development of manufacture of high-technology equipment in Russia

Provision of high quality services

Attraction of skilled and qualified personnel

Strict compliance with country specific service quality & HSE standards

Proper planning, excellent execution and accurate reporting during the work execution

NewTech Services Group

3

Development of NewTech Services Group

4

Regions of operation

5

Range of Services

Fishing and Work Over of Well Services.

• Complete Range of Fishing Equipment for all Hole / Casing Sizes from 4 ½” thru 42”

Casing Cutting and P&A Well Abandonment Equipment and Services.

Milling Operations.

• Casing Milling and Re-drill Applications and Services.

• Section Milling Applications and Services.

• Junk Milling & Tubular Milling Applications and Services.

• Production Packer Milling and Retrieving Services.

Drilling Jars

• Drilling Jars Rental.

• Bottom Hole Assembly Placement Services.

Sidetracking and Whipstock Solutions and Services.

Hole Enlarging Products and Services.

New Technology Products.

• BHA Analysis and Drill String Component Optimization.

• Torque Reduction Products.

• BHA Products.

• Deep Water Products.

• Multi-Lateral Concepts and Solutions.

6

Drill Pipe

Jarring BHA

Safety Joint

Drill Collar

Spear

Overshot

Milling equipment

Fishing magnets

Reverse circulation fishing magnets

Fishing BHA

Safety joint

Intensifier

Fishing Jar

Bumper sub

Drill collar

SpearOvershotScrew in subTaper tapDie collar

7

We are working with NEW highly reliable and quality equipment manufactured by:

All equipment is certified by API and ISO

Equipment Manufacturers

8

Fishing Equipment

All equipment is manufactured and certified to API and ISO specifications

Overshot’s Full Strength, Semi Full Strength & Slim hole variations.

Spears: Bowen ITCO type: from 2 ¼” thru 36”.

Spear Pack off Tools & Spear Stop Subs.

Reverse Circulation Junk Baskets 6” hole thru 17 ½”.

Fishing Jars, Fishing Accelerators and Fishing Bumper Subs.

Drilling Safety Joint’s 6” hole thru 12 ¼”.

Wash over Pipe and all associated equipment

i.e. Wash over Shoes, Drive Subs, lift nubbins, elevators etc.

Wash over pipe sizes 4”, 4 1/2”, 4 ¾”, 5 ½”, 5 ¾”, 7 5/8”, 8 1/8”, 10 ¾”

& 11 ¾” Diameter

EquipmentVideos

Overshot Washover pipe & shoe

9

Milling Equipment

Mills

Junk Mills: Standard carbide and Insert dressed sizes ranging from 3” – 17 ½”

Pilot Mills: 3” - 17 ½”

String Mills: 3” – 17 ½”

Taper Mills: 3” – 17 ½”

All equipment is manufactured and certified to API and ISO specifications

10

A robust body machined from solid 4145 steel forging

and API external connections no parallel threads in

the structural part of the tool.

The SDR has an integral stabilised section

immediately below the underreaming section to

maintain concentricity and reduce vibration, and does

not rely on stabilisers below the underreamer.

Activated by Bit Pressure Drop but can be

modified to suit drop-ball activation

The Arm actuation does not involve cams underneath the

blades – if the Arms are pulled back against a restriction,

the activation force can be overcome and they are forced

to close into the Body which prevents hanging up on the

tool

Placement of nozzles in the arm bays ensures that

they remain clear of debris which could prevent arm

closure.

Custom designed cutters maximise diamond coverage at the

lead corner of the Cutter Arms. Top quality PDC inserts

sourced from industry recognised suppliers. Cutter Arms are

replaceable without breaking down the rest of the tool. The

dynamic seals are deployed in the Top and Bottom Subs

allowing quick access for replacement.

Hydraulic Bore Hole Enlargement Equipment

All equipment is manufactured and certified to API and ISO specifications

11

Fishing equipment and P&A operation – Okhotskoye sea

On the shelf of the Okhotsk sea NewTech Services provides the following services:

Provide fishing basket in the drilling process

P&A service – casing cutting till 914mm

Engineering support

12

Standard BHA for Casing cutting

13

Cut and retrieve 20" and 36" Casing per 1 run in Okhotskoye sea

Results Achieved

Total time for cut and retrieve

Casings – 41 hour.

Total time on P&A operation

(incl. technological operations,

riser disassembly and sub sea

BOP) – 4 days.

14

Fixed Diameter Hole Openers manufactured from high quality steel AISI 4145 Mod H

Size ranging from 6” thru 42” hole

Fixed Bladed Hole Opener

• unique and patented blade lock system

Single stage IB hole opener

• premium PDC cutting structure

Heavy Duty single stage hole opener, 42”

• dual cutting structure enhances stability

• 3 openers available in Russia

Hole Openers

15

Rental Drilling Jar fleet in Russia & Europe

4 ¼’’ Drilling Jars c/w 2 7/8’’ IF connections.

4 ¾” Drilling Jars c/w 3 1/2” IF connections.

6 ½” Drilling Jars c/w 4 1/2” IF connections.

8” Drilling Jars c/w 6 5/8” REG connections.

Double Acting Hydraulic Drilling Jars

Double Acting Hydraulic-Mechanical Drilling Jars

Intended for use in all wells and including highly deviated or high friction wells where conditions may prevent applying sufficient force to release a mechanical latch.

Jar allows the operator to apply variable impact in both the up and down directions.

Standard seals suitable up to 250 °F (120 °C)

High temperature seal kits suitable up to 400 °F (200 °C)

Drilling Jars

All equipment is manufactured and certified to API and ISO specifications

16

Oscillator

Oscillator is the tool designed for drag reduction between the drill string and the formation.

Allows significantly increase the ROP by reducing drag when sliding

Provides stable weight on bit and increases BHA steerability

The most relevant application in horizontal wells, S-shaped profile wells and in wells with high DLS

Reduces the risk of PDM stalling during torque fluctuations.

A tool produces lateral vibrations to reduce frictions

17

Features and benefits

Features and benefits

Transformation of mud hydraulic energy into mechanical vibrations

Improved weight transfer helps eliminate weight stacking issues

Ability of changing the vibration frequency

High reliability

Compatible with MWD

Hydraulically activated tool

The mud flow is distributed around the plug

The stator directs the mud flow at preadjusted angle

The flow creates pressure on the rotor and forces it to rotate at a speed of 2000 rpm

Rotor rotation is transmitted to the eccentric and causes vibration

18

Main functions

Increases ROP and helps maintain tool face orientation

Friction and radial loads reduction

BHA and Drill string torque reduction

Reduction of tool orientation time in the wellbore after pulling of bottom

Reduces buckling

Longer bit life and improved PDC bitsperformance

Wellbore stability increase

horizontal wells and extended reach applications

Assists in differential sticking minimizing

19

Tool location in BHA

Plug Rotor Stator Piston Eccentric mass

Minimum 150-300 м from the bit

BHA placement depends on the location of sliding zones

Additional calculations needed for ERD wells placement.

20

New Technology Products - Torque Reduction Sub

Reduce Torque & Vibration up to 35%.

Reduces drill string component fatigue.

Minimize casing wear.

Increases ROP.

Assists with reducing lateral and axial vibration’s.

Interchangeable Sleeves for varying O.D’s

All equipment is manufactured and certified to API and ISO specifications

21

NewTech Services115162 , Russia, Moscow, Shabolovka, 31GTel: +7 (495) 363-68-74Fax: +7 (495) 363-68-75www.nt-serv.com

Thank you for your attention!