Drain Dosing DD & DN RANGE - Cleaning Matters · DD & DN RANGE Enzyme Chemical Dispenser innovation...
Transcript of Drain Dosing DD & DN RANGE - Cleaning Matters · DD & DN RANGE Enzyme Chemical Dispenser innovation...
DD & DN RANGEEnzyme Chemical
Dispenser
innovation > technology > future
Drain DosingequipmentDosing and Cleaning Systems
IntroductionIt is no longer acceptable to allow grease deposits to build up in the drainage system, causing odours and blockages which can prove costly and inconvenient. Pouring harsh caustic chemicals down the drain to clear fats, oil or grease (FOG) is also not permitted. The seko range of battery and mains powers automatic drain dosers provide an easy and inexpensive solution to the problem, which is environmentally friendly and compliant with food hygiene regulations.
ApplicationDrainage outlets in areas where food preparation is taking place should have a means of preventing grease build up that can lead to blockages and odour problems. The drain dosing systems can be easily installed directly into the drain outlet, grease traps or pumping stations.
How does it workThe DD1 will dispense a pre-determined volume of enzyme chemical into the drainage system at pre set times, typically when the kitchen is not in use. This allows time for the Enzyme to thoroughly break down the fatty deposits and be flushed away in the morning.
RuggedThe IP66 Polycarbonate enclosure provides protection against water ingress and high temperature environments, making these suitable for all kitchen and food preparation applications.
DD1• The DD1 comes with pre programmed delivery rates making the unit quick and easy to
set up.• Pre fitted with a specially designed long life battery pack ensuring the minimum of
installation time and only annual maintenance.• Being battery powered it is safe for all kitchen and drainage applications and requires only the minimum of
expertise to install.
DN3• The DN3 mains unit is avaliable in 2 and 9 program options.• The DN3 2 program unit can be set to dose twice each day at a time of your choice.• The DN3 9 program unit allows you to set individual times per day, the same set times Mon – Fri, the same set
times Mon – Sun, or different times for week days and weekends.
DN5• External controls for easy installation• Programmable to dose up to 9 times per day at an hour of your choice
to suit the application.• The DN5 can be supplied with a low level alarm to indicate when
chemicals need replacing.
DD1 Technical Specification
Customised LabelingThis unit can be branded with your company name, colours and styling.Please contact us for further information.
VOLTAGE
CONTROL
TUBE OPTIONS
FLOW RATE
ROLLERS
ENCLOSURE
MOTORS
APPROVALSWEIGHT
6v Battery Pack
Time controlled with selectable dosage rates
1.4kg
140ml/min
IP65 enclosure 180mm x 110mm x 90mm
Silicone
sprung loaded
6v DC with ball race bearings
EMC 89/336/EEC EN50081-1 LVD 72/23/EEC
Technical Specification
VOLTAGE
CONTROLTUBE OPTIONS
FLOW RATE
ROLLERS
ENCLOSURE
MOTORS
APPROVALSWEIGHT
210v-250v ac 50-60 Hz or 110v ac 50-60Hz
Time controlled with adjustable dose rates
1.2kg
140ml/min
IP65 enclosure 180mm x 110mm x 90mm
Silicone & Santoprene
sprung loaded
12v DC with large bearings
EMC 89/336/EEC EN50081-1 LVD 72/23/EEC
innovation > technology > future
Accessories 1 x 4m clear PVC tubing & tube support assembly1 x base connector1 x wall fixing bracket(Pipe connector optional extra)
DN3
DN5 Technical Specification
Customised LabelingThis unit can be branded with your company name, colours and styling.Please contact us for further information.
Please visit our website or contact us for further details on our dishwash, laundry and drain dosing dispensing systems, water treatment and process control equipment ranges.
www.sekouk.com+44 (0)1279 423550
+44 (0)1279 423993 [email protected]
Unit 2&3, Coldharbour Pinnacles Industrial Estate,Coldharbour Road, Harlow, Essex, UK CM19 5JH
Accessories 1 x 2m clear PVC tubing1x base connector(Pipe connector optional extra)
Dispensing Technology For Your Industry
VOLTAGE
CONTROL
TUBE OPTIONS
FLOW RATE
ROLLERS
ENCLOSURE
MOTORS
APPROVALSWEIGHT
innovation > technology > future
210v-250v ac 50-60 Hz or 110v ac 50-60Hz
Time controlled with adjustable dosage rates
1.2kg
180ml/min
IP65 enclosure 180mm x 110mm x 90mm
Silicone, Santoprene & EPDM
sprung loaded
12v DC with large bearings
EMC 89/336/EEC EN50081-1 LVD 72/23/EEC
Subject to change without notice. > © Seko SpA
For more informationwww.seko.com
seko has been a significant manufacturer of metering pumps and dosing systems for over 40 years. This longactivity allowed seko to acquire a vast experience in diversified applications and to confirm its international successin many industrial fields through the supply of reliable solutions for the dosing, injection and transfer of liquids.
Today seko is an International Group, developing, manufacturing and delivering its products in more than 50countries, through its 16 subsidiaries and an extended network of distributors, agents and authorized dealers.
A Worldwide Group at your service
BRAzILn Seko do BrasilCommercio de Sistemas deDosagem Limitada03170-050 São Paulo (SP) [email protected]
CHINAn Seko China Ltd072750 [email protected]
DENMARKn Seko DenmarkDK-4930 [email protected]
FRANCEn Seko Lefranc-Bosi S.A.77435 - Marne La ValleeCedex [email protected]@seko.frwww.lefrancbosi.com
GERMANyn Seko Deutschland GmbH55252 Mainz - [email protected]
ITALyn Seko Spa[Process & Sytems]Via Di Vittorio, 2520068 Peschiera Borromeo [email protected]@seko.com
ITALyn Seko SpaVia Salaria Km. 92,20002010 S.Rufina - [email protected]
ROMANIAn Seko Sieta S.r.l.400393 [email protected]
RUSSIAn OOO Seko129347 - [email protected]
SINGAPOREn Seko Dosing SystemsAsia Pacific Pte Ltd608838 [email protected]
SOUTH AFRICAn Seko Southern Africa(PTy) LtdKyasand - Johannesburg [email protected]
SPAINn Seko Ibérica Sistemas deDosificación S.A.08960 Sant Just Desvern [email protected]
SWEDENn Seko Sweden26123 [email protected]
TURKEyn Seko EndüstriyelPompalar ve ProsesSistemleri San. veTic. Ltd. Şti.Kartal Istanbul [email protected]
UNITED ARAB EMIRATESn Seko Middle East FzEP.O. Box 42090 – HamriyahFree zone, [email protected]@sekome.ae
USAn Seko Dosing SystemsCorporationTullytown - PA [email protected]
UNITED KINGDOMn Seko UK Chemical Controls LtdUnit 3, Coldharbour Pinnacles Industrial Estate, Coldharbour Road,Harlow, Essex, UK CM19 5JHTel: +44 (0) 1279 423550 • Fax: +44 (0)1279 423993E-mail: [email protected] • Web: www.sekouk.com
For more informationwww.seko.com