Download PalletPal Brochure

Level Loaders, Turntables, Rotators/Inverters,Low-Profile Levelers, and Transporters

PALLETPAL®

2

Load and Unload Pallets the Faster, Safer and Easier WayLoading and unloading pallets is a time consuming, back breaking job that can lead to excess worker fatigue or even injury. PalletPal® Level Loaders make the work faster, safer and easier. They position pallets at a comfortable working height virtually eliminating bending, reaching and stretching when building or breaking down pallet loads. Turntable equipped units allow users to spin the load so they are always working on the near side. This eliminates the need for walking around pallets while carrying heavy loads and removing the potential for trip and fall accidents.

More Models to Choose FromStarting with the original automatic spring-actuated unit introduced by Southworth in 1988, the line has grown to include several products, tailored for specific applications.

PalletPal Low-Profile

Pages 4 & 5

Powered PalletPal

Page 4

Automatic PalletPal

Page 3

PalletPal Mobile Levelers

Page 6

PalletPal Turntable Disc /Ring

Page 5

PalletPal Rotator / Inverters

Page 8

✓ Automatic Leveling — spring or airbag✓ Operator controlled powered leveling✓ Hand pallet truck accessible✓ Multipurpose / transportable✓ Pallet load rotator / inverters✓ Portable floor mounted turntables

A small investment in any of our PalletPal productspays dividends by increasing productivity,reducing employee lost time and creating

a happier, more motivated workforce.

3

The Pneumatic Option PalletPal® 360 Air provides all the performance of our spring unit, but uses an airbag that operates on shop air. The PalletPal 360 Air also includes a small spring to provide a more linear response than is possible with an air bag alone. The spring also provides a measure of safety by restricting the descent of the unloaded turntable in the event of accidental air loss. Exclusive PalletPal base design keeps all components within the diameter of the turntable ring offering workers complete 360˚ access to loads with no reach-over zones.

PALLETPAL® 360 AIR FULLY AUTOMATIC PNEUMATIC-ACTUATED For Use Where Loads Vary Widely and are Changed Frequently

With inherent stability and no power sources or connections, the fully automated mechanical PalletPal® 360 is virtually maintenance-free. The turntable is easily rotated even when fully loaded and allows for nearside loading and unloading without walking around the unit. Exclusive PalletPal base design keeps all components within the diameter of the turntable ring offering workers complete 360˚ access to loads with no reach-over zones.

PALLETPAL® 360 FULLY AUTOMATIC SPRING-ACTUATEDIdeal for Most Applications

ATIC SPRING-ACTUATED

Spring installation is fast and easy. Springs accommodate wide load range with no need for adjustment and require no tools.

Best used with uniform loads

Optional phenolic frame cover. For airbag or spring units.

Best used with uniform loads

CAPACITYLOWERED

HEIGHTRAISEDHEIGHT

SHIPPING WEIGHT

400 - 4,500 lbs. 91⁄2" 28" 410 lbs.

CAPACITYLOWERED

HEIGHTRAISEDHEIGHT

SHIPPING WEIGHT

400 - 4,500 lbs. 91⁄2" 273⁄4" 435 lbs.

Fork channels forrelocation by fork truck.

Rugged lift table type frame for loads up to 4,500 lbs.

435⁄8" diameter, low-friction bearing-supported turntable.

Air bag fully protected in down position.

Fully guarded, easily accessible air outlet and gauge.

Wide base for free standing stability.

Rugged tubular steel frame for loads up to 4,500 lbs.

435⁄8" diameter, low-friction bearing-supported turntable.

Fork channels for relocation by fork truck.

Dampener provides smooth, gradual raising and lowering without overshoot or bounce.

Heavy-duty springs bring pallet to most convenient height.

Leveling feet (optional) allow use on sloping or uneven floors.

Wide base for free standing stability.

4

Best used with non-uniform loads(mixed product sizes)

Fork pockets forrelocation by fork truck.

PNEUMATIC

.

.

POWERED PALLETPAL®

MODEL NO.LIFT

MECHANISM CAPACITYTURNTABLEDIAMETER

LOWEREDHEIGHT

RAISEDHEIGHT POWER

SHIPPINGWEIGHT

PPH2-24

PPH4-24

Hydraulic

Hydraulic

2,000 lbs.

4,000 lbs

435⁄8"

435⁄8"

83⁄4"

83⁄4

323⁄4"

323⁄4"

115/1/60

115/1/60

700 lbs.

760 lbs.

PPA2-24

PPA4-24

Pneumatic

Pneumatic

2,000 lbs.*

4,000 lbs.*

435⁄8"

435⁄8"

91⁄2"

91⁄2"

331⁄2"

331⁄2"

80 PSI/15 CFM

80 PSI/15 CFM

640 lbs.

660 lbs.

* This is not a lifting capacity. These airbag actuated machines are dedicated to pallet positioning applications. The capacity denotes the maximum weight of the fully loaded pallet that is appropriate for each model.

When loads, weights, pallet sizes or product dimensions vary greatly, a Powered PalletPal® with total operator control is the solution. A foot control allows the operator to adjust the load to an infinite number of positions up to 32¾" (plus pallet), so it is always at the most comfortable height for loading and unloading. The manual turntable allows quick and easy rotation of the load so that the operator is always working on the near side, eliminating reaching, stretching and walking around. Built-in fork pockets provide both ease of portability and additional stability.

Powered PalletPal Level Loaders are available in two styles. The Hydraulic Powered PalletPal works on standard 115V power and is available in 2,000 and 4,000 lb. capacities. The Pneumatic Powered PalletPal operates on shop air. A heavy-duty airbag positions pallet loads weighing up to 4,000 lbs. with as little as 80 psi.

HYDRAULIC

PALLETPAL® ROLL-IN™

For Use with Hand Pallet Trucks

MODEL NO. CAPACITYPLATFORM

SIZELOWERED

HEIGHT RAISED HEIGHT RISE TIME I.D. POWERSHIPPINGWEIGHT

ROLL-E-2.5

ROLL-U 2.2-28

2,200 lbs.

2,200 lbs.

49" x 571⁄2"

49" x 571⁄2"

31⁄8"

31⁄8"

311⁄2"

311⁄2"

22 sec.

22 sec.

29"

29"

115/1/60

115/1/60

700 lbs.

700 lbs.

A unique low-profile design allows the Roll-In™ to be fed with an ordinary hand pallet truck. Simply pick up the palletized load (on any type of open-bottom pallet or skid), raise the pallet truck and roll the load into position. The pallet moves over the Roll-In while the pallet truck rolls in between the outside platform and center support beam. The load is uniformly positioned and the pallet truck can be lowered and rolled out of the way. Workers can access loads from all four sides with minimum reachover. A convenient foot switch control allows for hands-free positioning of loads, and a full perimeter toe guard provides an added measure of safety.

For use with open bottom pallet or skidX

to be fed with an ordinary hand pallet truck. Simply

load (on any type of open- truck and

over the pallet truck rolls in between

support beam. The load is uniformly positioned and the pallet truck can be lowered and rolled out of the way. Workers can access loads from all four sides with minimum reachover. A convenient foot switch

ROLL-U

ROLL-E

5

Photo-eye toe protection

.

.

With internal hydraulic power, PalletPal® Roll-On™ Level Loaders lower to floor height so pallets can be rolled on and off with a hand pallet truck. The lift is then easily adjusted by pushbutton or foot switch control to maintain an ideal height for manual loading and unloading. The narrow side and back panels provide easy reachover for four sided-access.

PALLETPAL® ROLL-ON™

For Use with Hand Pallet Trucks

Allows the operator to “dial-in” the exact increment of travel for loading or unloading. It will also return the platform to full height (or to fully lowered position) at the touch of a button.

Now available with One Touch Auto Leveling

PALLETPAL® ROLL-ON™ WITH TURNTABLE


SIZELOWERED

HEIGHTRAISED HEIGHT

RISETIME POWER

SHIPPINGWEIGHT

ROLLC2.5-28

ROLLC2.5-28

ROLLC2.5-28

ROLLC4-28

ROLLC4-28

ROLLC4-28

2,500 lbs.

2,500 lbs.

2,500 lbs.

4,000 lbs.

4,000 lbs.

4,000 lbs.

40" x 48"

44" x 48"

52" x 48"

40" x 48"

44" x 48"

52" x 48"

3⁄8"3⁄8"3⁄8"3⁄8"3⁄8"3⁄8"

283⁄8"

283⁄8"

283⁄8"

283⁄8"

283⁄8"

283⁄8"

22 sec.

22 sec.

22 sec.

30 sec.

30 sec.

30 sec.

115/1/60

115/1/60

115/1/60

115/1/60

115/1/60

115/1/60

1,350 lbs.

1,500 lbs.

1,650 lbs.

1,500 lbs.

1,650 lbs.

1,800 lbs.

Units are furnished with either pushbutton or foot switch control.


SIZELOWERED

HEIGHTRAISED HEIGHT

RISETIME POWER

SHIPPINGWEIGHT

ROLLC3-28 2,500 lbs. 44" x 48" 2" 30" 30 sec. 115/1/60 2,400 lbs.

Units are furnished with either pushbutton or foot switch control.

When vertical load positioning is not a major consideration, these easily moved turntables can still save worker time and energy. The PalletPal Ring can be fed by a fork lift or stacker. The PalletPal Disc is hand pallet truck accessible. By rotating the load, operators always work from the near side without walking around the pallet.

PALLETPAL DISC TURNTABLE - Hand pallet truck accessible

CAPACITY TURNTABLE HEIGHT TURNTABLE DIAMETER OVERALL DIAMETER SHIPPING WEIGHT

4,000 lbs. 7⁄8" 433⁄8" 483⁄4" 220 lbs.

PALLETPAL MANUAL TURNTABLE RING - Not accessible with hand pallet truck

CAPACITY TURNTABLE HEIGHT TURNTABLE DIAMETER OVERALL DIAMETER SHIPPING WEIGHT

4,400 lbs. 21⁄8" 435⁄8" 435⁄8" 150 lbs.

operators always work from the near side without

PALLETPAL® PORTABLE TURNTABLES

6

FORK OVER For use with skids and open bottom pallets to 40" wide

LOWERED RAISED OVERALL DIMENSIONS FORK FORK LOAD SHIPPING MODEL NO. CAPACITY DRIVE LIFT HEIGHT HEIGHT WIDTH LENGTH HEIGHT WIDTH LENGTH CENTER WEIGHT

PML-22-36-ME 2,200 lbs. Manual Electric 31⁄2" 36" 541⁄2 66" 521⁄2" 22" 24" 24" 505 lbs.

PML-30-36-ME 3,000 lbs. Manual Electric 31⁄2" 36" 27" 64" 52.5" 22" 45" 24" 505 lbs.

PML-22-47-ME 2,200 lbs. Manual Electric 31⁄2" 47" 27" 64" 60" 22" 45" 24" 535 lbs.




PML-22-80-ME 2,200 lbs. Manual Electric 31⁄2" 80" 27" 64.38" 98" 22" 45" 24" 675 lbs.

PALLETPAL® MOBILE LEVELER/STACKER

PALLETPAL® LIFT TRUCKIf you use open bottom pallets or skids, now you can transport and palletize with a single device. Loads can be adjusted up and down at the touch of a button or the PalletPal Lift Truck can be equipped with an optional “level eye” for auto leveling. Unit comes with 115V battery charger.

Perform multiple tasks with one versatile machine. Used by itself as a mobile pallet positioner or as a companion to your PalletPal, the mobile leveler can deliver and remove loads quickly and easily without the expense of a ride-on fork truck. The straddle design accepts any pallet or skid. A single PalletPal Mobile Leveler can feed multiple PalletPals. Comes with 115V battery charger and is available with automatic load leveling eye.

STRADDLE For use with any pallet or skid, even closed bottom

PMLS-22-35-ME 2,200 lbs. Manual Electric 21⁄2" 35" 431⁄2" - 571⁄2" 63" 521⁄2" 14-31" 42" 24" 600 lbs.

PMLS-30-35-ME 3,000 lbs. Manual Electric 21⁄2" 35" 431⁄2" - 571⁄2" 66" 521⁄2" 14-26" 42" 24" 625 lbs.

PMLS-22-46-ME 2,200 lbs. Manual Electric 21⁄2" 46" 431⁄2" - 571⁄2" 63" 60" 14-31" 42" 24" 535 lbs.




PMLS-22-79-ME 2,200 lbs. Manual Electric 21⁄2" 79" 431⁄2" - 571⁄2" 631⁄2" 98" 14-31" 42" 24" 675 lbs.

Models highlighted in yellow recommended for manual palletizing

MODELNO. CAPACITY LIFT

LOWEREDHEIGHT

RAISEDHEIGHT

FORKWIDTH

FORKLENGTH

INDIVIDUALFORK WIDTH

PUMPMOTOR BATTERY CHARGER

SHIPPINGWEIGHT

PT-33-E

PT-33-M

3,300 lbs.

3,300 lbs.

12V DC

Manual

31⁄2"

31⁄2"

311⁄2"

311⁄2"

211⁄4" or 27"

211⁄4" or 27"

48"

48"

61⁄2"

61⁄2"

12V

NA

12V, 90 Ah

NA

12V,10Amp

NA

345 lbs.

240 lbs.

For use with open bottom pallets or skids.

X

X

7

STACK-N-GO™ POWER DRIVEN STACKERSThese versatile multi-purpose machines are ideal for transporting loads on pallets, stacking loads, servicing rack or shelving up to 7' high or as an adjustable height workstation for loading and unloading pallets. Dual stage units will lift a 2,500 lb. load up to 90" (single stage units lift 3,000 lbs. up to 43"). Unique narrow mast and offset handle provide maximum operator visibility. Available in fork over or straddle styles. Ideal for use in light manufacturing, warehousing, assembly and even retail facilities.

MODEL MASTSTYLE

LIFTING CAPACITY

LIFTINGHEIGHT

OVERALLHEIGHT

LOADCENTER

FORK DIM.LENGTH/WIDTH

FORK OD VARIABLE

STRADDLE IDVARIABLE

SHIPPING WEIGHT

FPS3000-43 NAS 1 Stage 3,000 lbs. 43" 62" 24" 42"/ 6" 12" - 27" 40" - 50" 1,150 lbs.

FPS3000-90 NAS 2 Stage 2,500 lbs. 90" 109" fully extended 24" 42"/ 6" 12" - 27" 40" - 50" 1,350 lbs.

STRADDLE For use with any pallet or skid, even closed bottom

MODEL MAST STYLE

LIFTING CAPACITY

LIFTING HEIGHT

OVERALL HEIGHT

LOAD CENTER

FORK DIM.LENGTH/WIDTH

FORKOD FIXED

SHIPPING WEIGHT

FPS3000-43 NFO 21 1 Stage 3,000 lbs. 43" 62" 24" 45"/ 6" 21" 1,100 lbs.

FPS3000-43 NFO 27 1 Stage 3,000 lbs. 43" 62" 24" 42"/ 6" 27" 1,100 lbs.

FORK OVER For use with open bottom pallet or skid

When it comes to manually loading and unloading pallets, no one offers more tools to make the job faster, safer and easier than Southworth. Our PalletPal Level Loaders automatically lower or raise pallet loads as boxes are added or removed. A built-in turntable top allows all loading and unloading to be done from the near side.

A Stack-N-Go Compact Power Driven Stacker is the perfect device for placing fully loaded pallets onto or removing fully loaded pallets from a PalletPal.

X

STACK-N-GO™ & PALLETPAL®... THE PERFECT PAIR

POWER DRIVEN STACKERSThese versatile multi-purpose machines are ideal for transporting loads on pallets, stacking loads, servicing rack or shelving up to 7' high or as an adjustable height workstation for loading and unloading pallets. Dual stage units will lift a 2,500 lb. load up to 90" (single stage units lift 3,000 lbs. up to 43"). Unique narrow mast and offset handle provide maximum operator visibility. Available in fork over or straddle styles. Ideal for use in light manufacturing, warehousing, assembly and even

XXXXXXXXXXX

... THE PERFECT PAIR

PalletPal 360˚ Pneumatic PalletPal Powered PalletPal Stainless

Southworth Products CorpP.O. Box 1380, Portland, ME 04104-1380TEL: (800) 743 -1000 • (207) 878-0700FAX: (207) 797- 4734Email: [email protected]

Visit www.SouthworthProducts.com

© Southworth 2014 Printed in USA 9.14 Rev.2

MODEL OVERALL DIMENSIONS MAXIMUM MINIMUM CLAMP MAXIMUM LOAD SIZE SHIPPINGNO. CAPACITY WIDTH DEPTH HEIGHT OPENING OPENING SPEED WIDTH DEPTH HEIGHT POWER WEIGHT

SR-44-60 4,400 lbs. 96" 85" 89" 60" 30" 2" per sec. 48" 48" 60" 460/3/60 3,800 lbs.

SR-44-72 4,400 lbs. 108" 85" 94" 72" 42" 2" per sec. 48" 48" 72" 460/3/60 4,000 lbs.

SR-44-84 4,400 lbs. 1141⁄2" 85" 1051⁄2" 84" 54" 2" per sec. 48" 48" 84" 460/3/60 4,400 lbs.

Uses include:

• Replacing broken pallets• Switching loads to/from in-house

or shipping pallets• Transferring from pallets to slip sheets• Replacing damaged goods at the

bottom of the load No matter what the application, a PalletPal Rotator/Inverter isfaster, safer, and easier than manual restacking of pallets.

With the ability to handle pallet loads measuring up to 48" x 48" x 84" high, the PalletPal® Pallet Rotator/Inverter is a simple, rugged machine designed to invert entire pallet loads. The pressure adjustable clamping mechanism easily secures loads up to 4,400 pounds and rotates them 180 degrees on a massive anti-friction turret bearing.

1. Add replacement pallet or slip sheet to top of load.

2. Place loaded pallet into rotator/inverter.

3. Use the remote control to clamp and rotate load in about 15 seconds.

4. The entire cycle takes about a minute.

Just four simple steps…

Whether changing from premium in-house pallets to outbound pallets, skids, or slip sheets, or just replacing damaged items at the bottom of a load, the PalletPal Rotator/Inverter is the fastest, safest, and easiest way to get the job done.

measuring up to 48" x 48" x 84" high, the Pallet Rotator/Inverter is a simple,

rugged machine designed to invert entire pallet loads. The pressure adjustable clamping mechanism easily secures loads up to 4,400 pounds and rotates them 180 degrees on a massive anti-friction turret bearing.

PALLETPAL® ROTATOR/INVERTERRestack Pallets the Faster, Safer,and Easier Way

Download PalletPal Brochure

Documents

Transcript of Download PalletPal Brochure