HistorySuperior Boiler Works & Welding was founded in 1962 on Superior Street in Hamilton, Ontario Canada.

Initially the primary business was the installation, service and repair of boilers & pressure vessels.

However through the years as we have grown, developed and matured we have developed from a boiler & pressure vessel service company to a respected manufacturer of pressure vessels, heat exchangers & boiler parts.

SBWW TodaySBWW has grown into one of our areas largest General Mechanical/Electrical Contractors and Boiler Pressure Vessel Manufacturers.

With over 125 employees and growing we are able to design, fabricate and install for a wide variety of applications.

Over the years Superior has taken on complex projects and delivered on time and on budget solutions. We have become a one stop shop.

Recently we have constructed a new 88,000 square foot manufacturing facility allowing us to greatly increase our shop capacity as well the size and weight of vessels we can construct.

New Corporate Headquarters375 McNeilly Road, Stoney Creek

Ontario, Canada L8E 5H4Tel: (866) 561-1413, Fax: (905) 561-2725

88,000 Sq/Ft Manufacturing Plant

Sitting on 13-1/2 Acre Site

PREFAB BAY

2 – Overhead Cranes 1 - 20 Ton with 5 Ton Aux 1 - 30 Ton

4 – 3 Ton Rolling Gantry Cranes

NC Rotary Tube Bending (4” OD -24”Radius)

CNC Burning Table½” x 10’ Shear

250 Ton Brake Press

6 Fit up Welding Stations4 Sub Arc StationsMachining Center1” x 10’ Plate Roll

CNC Band Saw

MAIN ASSEMBLY HIGH BAY

2-90 Ton Over Head Cranes•40’Under Hook

4 – 5 ton Rolling Gantry Cranes

2 – Tandem Sub Arc Stations: •1200AC /1000 DC Amp •35’and 25’ mast heights •26’ boom

Storage Space

10,000 Sq/Ft Indoor •30’ High Narrow Isle Pallet Storage

10,000 Sq/Ft Outdoor •20 – Ton and 10- Ton Cranes •25 Foot Under Hook

8 Acres of Compacted Granular Surface •45 Ton Crawler

Future 35,000 Sq/Ft Outdoor •100 – Ton Gantry Crane•40 Foot Under Hook

Site Equipment and Access

Transportation Access• 1 Mile to QEW, Major Highway• Rail on Property• 2 Miles to Water

Under Construction• Bottom Car Furnace 24’(wide) x 24’(high) x 100’(long)• Sand Blast and Paint Booth

•Completion December 2008

ASME• CONSTRUCTION & ASSEMBLY OF POWER BOILERS IN THE SHOP & FIELD.

• (“S” STAMP)•CONSTRUCTION OF PRESSURE VESSELS IN THE SHOP & FIELD.

• (“U” STAMP)

NATIONAL BOARD• AUTHORIZATION TO APPLY THE “NB” MARK AND REGISTER “U” & “S” STAMPED ITEMS.

TSSA (Jurisdictional Authority, Ontario Authorized Inspection Agency )• REPAIRS & ALTERATIONS TO BOILERS, PRESSURE VESSELS, PIPING & FITTINGS• CONSTRUCTION & ASSEMBLY OF POWER BOILERS TO ASME SECTION I & CSA B51• CONSTRUCTION OF PRESSURE VESSELS TO ASME SECTION VIII DIVISION 1 & CSA B51• CONSTRUCTION OF CATEGORY H FITTINGS TO CSA B51• CONSTRUCTION OF POWER PIPING TO ASME B31.1• CONSTRUCTION OF PROCESS PIPING TO ASME B31.3• CONSTRUCTION OF REFRIGERATION PIPING TO CSA 52 & ASME B31.5

CWB (Canadian Welding Bureau)• CERTIFICATION TO CSA W47.1-03

• FOR FUSION WELDING OF STRUCTURAL STEEL.

SBWW Certifications

Custom Pressure Vessels - Any Size Required

Sulfuric Acid Storage Tank (Rubber Lined)12 feet x 80 feet

Stack Manufacture

10 ‘ Diameter - 316L SS - 85’ Long Two 45 Degree Offsets

2850 psi @700F High Pressure Steam

Steam Boiler

Steam Boiler- Interior

VacuumDegasifierFitted Ladders

& Platforms

15’ Davey Level Control Tank

Organic Fluid Separation Unit

Stainless Steel

80’ x 84” Diameter Degasifier

Stainless SteelCarbon Steel Skirt

Coke Hopper for Steel Mill

Economizer

Ammonia Still

Part of Ammonia Destruction Unit

Tank Car Style Spray Tray Deaerator

SBWW Boiler Deaerator 150,000 Lbs/Hr

Custom Heat Exchangers

10 ft Diameter4000 - 1¼” Tubes

Custom Waste Heat Boiler

Waste Heat Boiler

CustomHeat Exchanger

Deep SeaPressure

Compensator

48” Natural Gas Sphere5,000 psi - 5” wall

Condensate Polisher600 psig @ 250 F

PED Certified Vessel

Duplex Stainless Steel Strainers

Duplex Filter Design & Fabrication

Custom Boilers Components

Basic O2 Furnace Boiler PanelsTungsten Carbide Coated

350,000 Lbs/Hr

Fabrication & Installation

Process Pipe Bridge Installation

Process Pipe Installation

Selected List of Clients• AECL

• Air Liquide

• Bechtel

• Bunge

• Inco, Falconbridge, CVRD

•Dofasco, Arcelor, Mittal

• Fluor

• Foster Wheeler

• Intel

• Petro Canada

• GE

• Siemens Westinghouse

• Spence Engineering

• Stelco, US Steel

• Campbell Soup

• Tesoro