Downhole Drilling Motors Motor Sizes - procoring.com · NBR-1A, HSN-38 NBR-HR 4000 6000 Power...
Transcript of Downhole Drilling Motors Motor Sizes - procoring.com · NBR-1A, HSN-38 NBR-HR 4000 6000 Power...
Downhole Drilling MotorsTo meet the most stringent of directional well applications, we offer a full suite of conventional and performance mud motors.
Motor Sizes
All sizes available
Features
• Versatility of power sections with various lobe configurations for
different speed and torque parameters
• Zero to 3 adjustable bent housing
• Fixed bent housings available
• Motor stabilizations available
• Mud lubricated bearings assemblies and sealed bearing assemblies available
• Threaded rotor catch system
• Rotor/stator fits available for different temperature applications
prodirectional.com | 800.204.0009
Operating EnvironmentMaximum Working Pressure 20,000 PSIPulsation Dampeners charged to proper specificationsFlow Range 100 - 1,000 GPMPressure Drop Across Tool Approx. 160 PSI at 450 GPM w/waterMud Type Full rangeMud Pump Duplex or triplexMax L.C.M. 3/8” diameterSand Content .25% max.Temperature Range 175°C max.Surface Mud Screen RecommendedFloat Valve Required below probe
System OperationToolface Update Rates Selected from 14 to 28 secondsMTF/GTF Crossover Operator selectableSurvey Time 160 secondsBattery Life 650 plus hoursPulse Type PositiveSurvey Trigger Stop and restart mud pumpsDown Link Change mode of operationSensor Measurement Point 18’ from bottom of UBHO
Data SpecificationsParameters Data Range ResolutionInclination 0 - 180 0.1Azimuth 0 - 360 0.1Magnetic Toolface 0 - 360 5.5Gravity Toolface 0 - 360 +/- 180 5.5Probe Temperature 0 - 350 1.5Magnetic Dip -90 - 90 0.1Total Magnetic Field 0.0 - 1.0 gauss 100 gaussTotal Gravity 0.0 - 2.0 G’s 0.1 G’s
Probe DimensionsO.D. Length Weight2.250” Centralizer 26 ft 150 lbs1.875” Pressure Barrels
Gamma Ray SpecificationsPerformance Sensitivity 1.7 counts per APIAccuracy +/- 5% to 300°F +/- 10% to 350°FThin-bed Resolution 6.8”(in 8” hole diameter, at 50% points)
EnvironmentalSurvival Temperature 175°CMax Heat / Cool Rate 5°F / minuteVibration (3 axis) 50-300 Hz 30 G. RMSRandom Spectrum Shock (Z-axis) 500 G, 0.5 mS.Shock (X or Y axis) 1000 G, 0.5 mS.
MWD/Gamma ServicesWe ensure that our MWD tools are easily assembled in the field, making the configuration process seamless to operate in a variety of downhole conditions.
prodirectional.com | 800.204.0009
Conventional CoringQuality Cores Deliver Quality Information
• ProCoring specializes in conventional, oriented and long
distance coring systems.
• ProCoring’s systems utilize an innovative external adjustment
technique that reduces rig time when assembling the
coring BHA.
• We have introduced a new laydown frame to prevent mechanical
damage to the core during the laydown process. The new
design eliminates the need for a man rider to secure the
aluminum inner barrel to the frame.
• We use spring loaded check valves in all coring operations to
ensure the efficient evacuation of breakout gas on pull out of
hole with the newly acquired core.
• We have a very experienced group of coring professionals.
Our field personnel average 12 years of experience with service
in all major basins in the U.S. including offshore.
procoring.com | 800.204.0009
On the Cutting Edge of InterventionCoiled Tubing and Work Over Rigs
ProThruTubing has a seasoned staff with a combined 30+ years of experience in our management team and an average of 15+ years of experience for our field personnel. We work together for a common goal: To give our customers 100% satisfaction as we are dedicated to your cause.
Our Thru-Tubing services enable well interventions inside cased hole or production tubing.
Specific applications of our Thru-Tubing services include:• Drill outs • Toe preps• Clean outs • Under Reaming• Screen outs • Cased hole fishing operations• Nitrogen jetting • Perforating gun run
Available Motor Sizes:• 3.125” • 2.875” • 2.125” • 1.69”
Available Power Sections:• BICO • Roper • NOV
Available Products:• Drilling jars • Fishing tools• Agitators • Jet motors• Slammer hammers • Indexing tools• Tubing cutters • Rock bits
We have a wide variety of mill sizes and configurations
Meeting & Exceeding Our Customer’s Needsprodirectional.com | 800.204.0009
Experience Enhances Performance
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 2.730 ft-lb/psi 0.537 Nm/kPaFlow Range 100 to 250 GPM 380 to 950 Litre/minRotation 1.020 Rev/Gal 0.270 Rev/LitreSpeed Range 102 to 260 RPMOff Bottom Press 88 psi 610 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 950 (6520) 1420 (9770)Max Torque ft-lb (Nm) 2580 (3500) 3870 (5250)Stall Diff Press psi (kPa) 1420 (9770) 2130 (14660)Stall Torque ft-lb (Nm) 3870 (5250) 5800 (7870)Max Recommended HP (kW) 125 (93) 177 (132)
1000
1000
2000
3000
4000
5000
6000
tt-lb
Nm
Torque
RPM
0 0
2000
3000
4000
300
250
200
150
100
50
00 200 400 600 800 1000 1200
8000 10000
NBR-1A, HSN-38 NBR-HR
60004000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-250 LPM-946
GPM-200 LPM-757
GPM-150 LPM-557
NBR-1A &HSN-38
Power Section Di� Pressure (psi)
20000
1400
NBR-HR
DOWNHOLE DRILLING MOTORS
Model No: DD475456.3 4.75” 4/5 Lobes 6.3 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 2.691 ft-lb/psi 0.529 Nm/kPaFlow Range 150 to 350 GPM 570 to 1320 Litre/minRotation 0.946 Rev/Gal 0.250 Rev/LitreSpeed Range 141 to 340 RPMOff Bottom Press 122 psi 840 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 1010 (6930) 1510 (10390)Max Torque ft-lb (Nm) 2700 (3670) 4060 (5500)Stall Diff Press psi (kPa) 1510 (10390) 2260 (15590)Stall Torque ft-lb (Nm) 4060 (5500) 6090 (8250)Max Recommended HP (kW) 170 (127) 242 (181)
1000
1000
2000
3000
4000
5000
6000
tt-lb
Nm
Torque
0 0
2000
3000
4000
5000350
300
250
200
150
100
50
00 200 400 600 800 1000 1200
8000 10000
NBR-1A, HSN-38 NBR-HR
60004000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-350 LPM-1324
GPM-250 LPM-946
GPM-150 LPM-567
NBR-1A &HSN-38
Power Section Di� Pressure (psi)
20000
16001400
NBR-HR
RPM
DOWNHOLE DRILLING MOTORS
Model No: DD475566.7 4.75” 5/6 Lobes 6.7 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 2.576 ft-lb/psi 0.507 Nm/kPaFlow Range 100 to 275 GPM 380 to 1040 Litre/minRotation 1.000 Rev/Gal 0.264 Rev/LitreSpeed Range 100 to 280 RPMOff Bottom Press 107 psi 740 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 1250 (8580) 1870 (12880)Max Torque ft-lb (Nm) 3210 (4350) 4810 (6530)Stall Diff Press psi (kPa) 1870 (12880) 2800 (19310)Stall Torque ft-lb (Nm) 4810 (6530) 7220 (9790)Max Recommended HP (kW) 168 (125) 239 (178)
1000
1000
2000
3000
4000
5000
6000
7000
8000
tt-lb
Nm
Torque
0 0
2000
3000
4000
5000
6000300
250
200
150
100
50
00 500 1000 1500
8000 12000 1400010000
NBR-1A, HSN-38 NBR-HR
60004000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-275 LPM-1040
GPM-185 LPM-700
GPM-100 LPM-378
NBR-1A &HSN-38
Power Section Di� Pressure (psi)
20000
2000
NBR-HR
RPM
DOWNHOLE DRILLING MOTORS
Model No: DD475568.3 4.75” 5/6 Lobes 8.3 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 8.974 ft-lb/psi 1.765 Nm/kPaFlow Range 150 to 300 GPM 570 to 1140 Litre/minRotation 0.263 Rev/Gal 0.070 Rev/LitreSpeed Range 39 to 79 RPMOff Bottom Press 46 psi 320 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 390 (2690) 590 (4030)Max Torque ft-lb (Nm) 3500 (4750) 5250 (7120)Stall Diff Press psi (kPa) 590 (4030) 880 (6050)Stall Torque ft-lb (Nm) 5250 (7120) 7880 (10680)Max Recommended HP (kW) 53 (39) 75 (56)
1000 1500
3000
4500
6000
tt-lb
Nm
Torque
0 0
2000
3000
4000
5000
140
120
100
60
80
20
40
00 100 200 300 400 500
4000 60005000
NBR-1A, HSN-38 NBR-HR
30002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-300 LPM-1135
Power Section Di� Pressure (psi)
10000
600 700 800 900
GPM-225 LPM-851
GPM-150 LPM-567
NBR-HR
RPM
NBR-1A &HSN-38
DOWNHOLE DRILLING MOTORS
Model No: DD475782.6 ESX 4.75” 7/8 Lobes 2.6 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 5.200 ft-lb/psi 1.023 Nm/kPaFlow Range 150 to 250 GPM 570 to 950 Litre/minRotation 0.521 Rev/Gal 0.138 Rev/LitreSpeed Range 78 to 140 RPMOff Bottom Press 64 psi 440 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 570 (3930) 860 (5900)Max Torque ft-lb (Nm) 2960 (4020) 4450 (6030)Stall Diff Press psi (kPa) 860 (5900) 1280 (8840)Stall Torque ft-lb (Nm) 4450 (6030) 6670 (9050)Max Recommended HP (kW) 74 (55) 104 (78)
1000
1000
2000
3000
4000
5000
6000
tt-lb
Nm
Torque
RPM
0 0
2000
3000
4000
300
250
200
150
100
50
00 200 400 600 800 1000 1200
8000 10000
NBR-1A, HSN-38 NBR-HR
60004000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-250 LPM-946
GPM-200 LPM-757
GPM-150 LPM-557
NBR-1A &HSN-38
Power Section Di� Pressure (psi)
20000
1400
NBR-HR
DOWNHOLE DRILLING MOTORS
Model No: DD475783.8 4.75” 7/8 Lobes 3.8 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 7.977 ft-lb/psi 1.569 Nm/kPaFlow Range 150 to 400 GPM 570 to 1510 Litre/minRotation 0.330 Rev/Gal 0.087 Rev/LitreSpeed Range 49 to 140 RPMOff Bottom Press 79 psi 540 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 720 (4960) 1080 (7450)Max Torque ft-lb (Nm) 5740 (7790) 8620 (11680)Stall Diff Press psi (kPa) 1080 (7450) 1620 (11170)Stall Torque ft-lb (Nm) 8620 (11680) 12920 (17520)Max Recommended HP (kW) 144 (108) 207 (154)
2000
2050
4100
6150
8200
1025
012
300
tt-lb
Nm
Torque
0 0
4000
6000
8000
1000
0140
120
100
80
60
40
20
00 200 400 600 800 1000
4000 6000 7000 80005000
NBR-1A, HSN-38 NBR-HR
30002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-400 LPM-1514
NBR-1A &HSN-38
Power Section Di� Pressure (psi)
10000
1200
GPM-275 LPM-1040
GPM-150 LPM-567
NBR-HR
RPM
DOWNHOLE DRILLING MOTORS
Model No: DD625784.8 6.25” 7/8 Lobes 4.8 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 15.556 ft-lb/psi 3.059 Nm/kPaFlow Range 300 to 500 GPM 1140 to 1890 Litre/minRotation 0.160 Rev/Gal 0.042 Rev/LitreSpeed Range 48 to 80 RPMOff Bottom Press 64 psi 440 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 500 (3410) 740 (5120)Max Torque ft-lb (Nm) 7700 (10440) 11550 (15660)Stall Diff Press psi (kPa) 740 (5120) 1110 (7680)Stall Torque ft-lb (Nm) 11550 (15660) 17330 (23490)Max Recommended HP (kW) 117 (87) 165 (123)
3000
6000
3000
9000
1200
015
000
1800
0
tt-lb
Nm
Torque
0 0
6000
9000
1200
015
000
90
80
70
40
50
60
20
10
30
00 100 200 300 400 500
4000 5000
NBR-1A, HSN-38 NBR-HR
30002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-500 LPM-1892
Power Section Di� Pressure (psi)
10000
600 700 800
GPM-400 LPM-1514
GPM-300 LPM-1135
NBR-HR
RPM
NBR-1A &HSN-38
DOWNHOLE DRILLING MOTORS
Model No: DD650783.3 ESX2 6.50” 7/8 Lobes 3.3 Stages
PERFORMANCE SPECIFICATIONS
Torque Slope 5.770 ft-lb/psi 1.135 Nm/kPaFlow Range 300 to 600 GPM 1140 to 2270 Litre/minRotation 0.497 Rev/Gal 0.131 Rev/LitreSpeed Range 149 to 300 RPMOff Bottom Press 184 psi 1270 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 1050 (7240) 1580 (10860)Max Torque ft-lb (Nm) 6060 (8220) 9090 (12330)Stall Diff Press psi (kPa) 1580 (10860) 2360 (16290)Stall Torque ft-lb (Nm) 9090 (12330) 13630 (18490)Max Recommended HP (kW) 344 (257) 482 (360)
3000
6000
3000
9000
1200
015
000
tt-lb
Nm
Torque
0 0
6000
9000
1200
0350
300
150
200
250
50
0
100
0 200 600400 800 1000 1200
8000 10000 12000
NBR-1A, HSN-38 NBR-HR
60004000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-600 LPM-2271
Power Section Di� Pressure (psi)
20000
1400 1600 1800
GPM-450 LPM-1703
GPM-300 LPM-1135
NBR-HR
RPM
NBR-1A &HSN-38
prodirectional.com | 800.204.0009
DOWNHOLE DRILLING MOTORS
Model No: DD675457.0 6.75” 4/5 Lobes 7.0 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 15.378 ft-lb/psi 3.024 Nm/kPaFlow Range 300 to 500 GPM 1140 to 1890 Litre/minRotation 0.160 Rev/Gal 0.042 Rev/LitreSpeed Range 48 to 80 RPMOff Bottom Press 162 psi 1120 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 440 (3000) 650 (4500)Max Torque ft-lb (Nm) 6690 (9070) 10030 (13600)Stall Diff Press psi (kPa) 650 (4500) 980 (6750)Stall Torque ft-lb (Nm) 10030 (13600) 15050 (20410)Max Recommended HP (kW) 120 (76) 143 (107)
2000
5000
1000
015
000
tt-lb
Nm
Torque
0 0
4000
6000
8000
1000
012
000
90
80
70
60
50
30
40
10
20
00 100 200 300 400 500
3000 4000 5000
NBR-1A, HSN-38 NBR-HR
2000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-500 LPM-1882
Power Section Di� Pressure (psi)
10000
600 700
GPM-100 LPM-1514
GPM-900 LPM-1135
NBR-HR
RPM
NBR-1A &HSN-38
DOWNHOLE DRILLING MOTORS
Model No: DD675782.9 6.75” 7/8 Lobes 2.9 Stages
PERFORMANCE SPECIFICATIONS
Torque Slope 9.300 ft-lb/psi 1.829 Nm/kPaFlow Range 300 to 600 GPM 1140 to 2270 Litre/minRotation 0.288 Rev/Gal 0.076 Rev/LitreSpeed Range 86 to 180 RPMOff Bottom Press 137 psi 940 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 750 (5170) 1130 (7760)Max Torque ft-lb (Nm) 6980 (9460) 10460 (14190)Stall Diff Press psi (kPa) 1130 (7760) 1690 (11630)Stall Torque ft-lb (Nm) 10460 (14190) 15690 (21280)Max Recommended HP (kW) 229 (171) 323 (241)
4000
4000
8000
1600
012
000
tt-lb
Nm
Torque
0 0
8000
1200
0
200
180
160
100
120
140
60
40
20
80
00 200 400 600 800 1000
6000 7000 8000
NBR-1A, HSN-38 NBR-HR
5000400030002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-600 LPM-2271
Power Section Di� Pressure (psi)
10000
1200
GPM-450 LPM-1703
GPM-300 LPM-1135
NBR-HR
RPM
NBR-1A &HSN-38
prodirectional.com | 800.204.0009
DOWNHOLE DRILLING MOTORS
Model No: DD675785.0 6.75” 7/8 Lobes 5 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 10.698 ft-lb/psi 2.104 Nm/kPaFlow Range 300 to 600 GPM 1140 to 2270 Litre/minRotation 0.242 Rev/Gal 0.064 Rev/LitreSpeed Range 72 to 150 RPMOff Bottom Press 106 psi 730 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 860 (5900) 1280 (8840)Max Torque ft-lb (Nm) 9150 (12400) 13720 (18600)Stall Diff Press psi (kPa) 1280 (8840) 1920 (13260)Stall Torque ft-lb (Nm) 13720 (18600) 20580 (27910)Max Recommended HP (kW) 253 (188) 355 (265)
4000
4000
8000
2000
016
000
1200
0
tt-lb
Nm
Torque
0 0
8000
1200
016
000
160
100
120
140
60
40
20
80
00 200 400 600 800 1000
6000 7000 8000 9000
NBR-1A, HSN-38 NBR-HR
5000400030002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-600 LPM-2271
Power Section Di� Pressure (psi)
10000
1200 1400
GPM-450 LPM-1703
GPM-300 LPM-1135
NBR-HR
RPM
NBR-1A &HSN-38
DOWNHOLE DRILLING MOTORS
Model No: DD675785.7 SX2 6.75” 7/8 Lobes 5.7 Stages
prodirectional.com | 800.204.0009
PERFORMANCE SPECIFICATIONS
Torque Slope 16.589 ft-lb/psi 3.262 Nm/kPaFlow Range 400 to 900 GPM 1510 to 3410 Litre/minRotation 0.166 Rev/Gal 0.044 Rev/LitreSpeed Range 66 to 150 RPMOff Bottom Press 126 psi 870 kPa
PERFORMANCE DETAILS NBR-1A & HSN-38 NBR-HR
Max Diff Press psi (kPa) 600 (4140) 900 (6210)Max Torque ft-lb (Nm) 9950 (13490) 14930 (20240)Stall Diff Press psi (kPa) 900 (6210) 1350 (9310)Stall Torque ft-lb (Nm) 14930 (20240) 22400 (30360)Max Recommended HP (kW) 283 (211) 401 (299)
4000
5000
1000
020
000
1500
0
tt-lb
Nm
Torque
0 0
8000
1200
016
000
160
100
120
140
60
40
20
80
00 100 200 300 400 500
6000
NBR-1A, HSN-38 NBR-HR
5000400030002000
Power Section Di� Pressure (kPa)
Maximum Recommended Di� PressureGPM-900 LPM-3406
Power Section Di� Pressure (psi)
10000
600 700 800 900 1000
GPM-650 LPM-2460
GPM-400 LPM-1514
NBR-HR
RPM
NBR-1A &HSN-38
DOWNHOLE DRILLING MOTORS
Model No: DD800784.0 8” 7/8 Lobes 4 Stages