DOOR DETAILS - Welcome to REBCO · Doors can also be customized with special push-pull hardware to...
Transcript of DOOR DETAILS - Welcome to REBCO · Doors can also be customized with special push-pull hardware to...
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
NJ 973 - 684 - 0200 • NY 212 - 736 - 6435 Outside NY/NJ 800 - 777 - 0787 • FAX 973 - 684 - 0118
Rebco’s in Front!!!
DOOR DETAILSFlush Glazing • Pressure Wall • Division Bar • Tubes • Angles • Channels • Bars • Sheets & Panels
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 01182. © 9/2015
Rebco’s in Front! ! !
REBCO ALUMINUMENTRANCE DOORSOur entrances range from specially reinforced narrow stile doors to heavy duty wide stile types. At REBCO, your most unusual entrance projects are handled quickly and precisely. When it comes to custom detailing, our skilled craftsmen are eager to meet your most difficult demands.
We'll fabricate entrances with special grids and panels to enhance the building’s appearance and tailor the door to specific applications. Add a glazing bead in a complimentary or contrasting color (or finish), or make the entrance two-tone (one to compliment the interior of the building and another to coordinate with the building exterior). We manufacture a wide variety of standard entrances, however, our ability to fabricate to your custom specifications is unparalleled.
Doors can also be customized with special push-pull hardware to meet your exacting specifications. Because Rebco entrances are fabricated from a wide variety of stiles, it is easy for you to customize your own door!
For the perfect entrance . . . REBCO's in Front !!!
REBCO also stocks the largest selection of architectural aluminum shapes in the New York Metropolitan area, and serves the building industry from coast to coast. We carry a complete line of storefront extrusions from pressure wall, seamless mullion and flush glaze systems down to division bars, sash, bar stock, panels and sheets – all available in a variety of finishes.
In addition, REBCO manufactures a complete line of commercial windows – hop-pers, vents, casements and fixed units, or any combination in both thermal and non-thermal framing.
STANDARD SWINGS OF REBCO ENTRANCESNOTE: For all pairs, the door on the right (HRSO or HRSI) is active (with cylinder) – unless otherwise specified.
IN SWING
HLSILeft Hand Swing In
HRSIRight Hand Swing In
HLSO HRSO
Interior
Exterior
Interior
Exterior
Interior
Exterior
Interior
Exterior
Interior
Exterior
OUT SWING
Interior
Exterior
Interior
Exterior
DOUBLE ACTINGCENTER HUNG
Can be made single acting (by use of an applied angle in the head) upon request.
NOTE: This type of entrance cannot be fully weathered.
Left Hand Swing Outor Right Hand Reverse
Right Hand Swing Outor Left Hand Reverse
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 3.© 9/2015
Rebco’s in Front! ! !
THE BASIC THREE
Narrow Stile Medium Stile Wide Stile
©R
ebco
, Inc
.
©R
ebco
, Inc
.
©R
ebco
, Inc
.
NARROW STILESuper Strength Series S Door
When you want an inviting entrance with a light open look, specify REBCO's Narrow Stile Door. Its attractive slim appearance is backed by REBCO's special triple-reinforced welded construction and will give you consistent trouble-free operation in heavy or light traffic areas under all weather conditions.
REBCO's Narrow Stile Door is well-suited to meet the demands of any custom hardware installation, or if you prefer, you may also consider the addition of custom colors to create a truly unique entrance.
As with all REBCO doors, the Series S door corners are constructed with a reinforcing anchor block which is coin punched, inter-locked, bolted and then welded with a 100% deep penetration weld.
REBCO's Medium Stile Door, Series M, is the right answer when extra strength is needed to handle the heavy traffic generated by supermarkets, schools, and other high population installations.
The Series M door features a 6-13/16" bottom rail. As with all REBCO doors, the Series M door corners are constructed with a reinforcing anchor block which is coin punched, interlocked, bolted and then welded with a 100% deep penetration weld. The sturdy construction and wall thickness make this door an ideal choice for center hung hardware operation.
Thick door pile is used on all REBCO doors as required for an effective thermal barrier. This is one of the many features that make the REBCO door superior for operation under all weather conditions.
5" WIDE STILE Super Strength Series W Door
REBCO's Wide Stile Series W Door has the design and construction capabilities to handle the most severe traffic conditions that can be imposed on any entrance door. This entrance complements strong, monumental style buildings. If a lighter appearance is desired in a door, but traffic patterns call for this wide, sturdy door, it is possible to create the illusion of lightness through appropriate color applica-tion. Call us for recommendations. We are always happy to assist you with appropriate selections for your specific project.
The corners in the Series W door have the same outstanding construction features as REBCO's narrow and medium stile doors. In addition, all REBCO doors feature an adjust-able nosing that can be moved in or expanded out to permit ease of installation.
31/2" MEDIUM STILESuper Strength Series M Door
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 01184. © 9/2015
Rebco’s in Front! ! !
INDEX
Astragals
Pair of Doors .............................................. 52
Panic Astragal ............................................ 52
Single Door ................................................ 52
Butts................................................................... 48
Closers .............................................................. 49
C.O.C. Conditions .......................................... 12
Colonial Door Grids ..................................... 17
Colonial Doors .........................................18-19
Concealed Overhead Closer ..................... 49
Concealed Panic ........................................... 53
Continuous Hinge ......................................... 48
Cover Plate, C.O.C. ....................................... 49
Crash Chain..................................................... 50
Cylinders .......................................................... 50
Deco Panel Doors ........................................ 13
Details, 1/4 Size 1-3/4" x 4-1/2" Flush Glazing for 1/4" Glass ..... 39-42
2" x 4-1/2" Flush Glazing for 1" Glass ......... 43-44
2" x 4-1/2" Flush Glazing for 1" Glass, Thermal Break ....................................... 45
Center Hung Door .................... 40, 42-44
Offset Door .................................39, 41, 45
Door Narrow Stile ..........................................3, 6-7 Medium Stile .......................................3, 8-9 Wide Stile ........................................ 3, 10-11
Door Holder, Drop Arm .............................. 50
Door Rails ........................................................ 15
Door Stops and Fillers ................................. 38
Drop Plate........................................................ 49
Dummy Cylinder ........................................... 50
Electric Release .............................................. 51
Escutcheon ...................................................... 50
Finger Guard ...............................................7, 50
Flush Bolts ....................................................... 51
FRP Doors................................................. 28-35 FRP V-350 ............................................ 28-31 FRP V-600 ........................................... 32-35 Vision Lites for FRP Doors .................... 36
Full Flush Doors ...................................... 24-27
General Specifications ....................................5
Glazing Beads, alternates ........................... 17
Glazing Vinyl ................................................... 52
Grids .................................................................. 17
Handle .............................................................. 47 Hallet ............................................................ 47 Knob ............................................................. 51 Lever w/cam .............................................. 51 Paddle .......................................................... 51 Standard ...................................................... 47 Wire ............................................................... 47
Hardware .............................................. 47 – 53
Hinge ................................................................. 48
Intermediate Door Rails ........................14-15
Kickplates ......................................................... 16
Latch Locks ...................................................... 51
Louver Doors .................................................. 37
Mail Slot............................................................ 50
Medium Stile Door .................................3, 8-9
Mortise Cylinder ............................................ 50
Mullion, Removable ..................................... 53
Narrow Stile Door ...................................3, 6-7
Offset Pivots .................................................... 48
Paint, Touch up Spray .................................. 50
Panel Doors 1/4" Panel Door ................................ 20-21 1" Panel Door .................................... 20-21 1-1/2" Panel Door ........................... 22-23 Deco-Panel Door ...................................... 13
Panics ................................................................ 53 In-Line Panic .............................................. 53 Mortise Devices ........................................ 53 Vertical Rod ................................................ 53
Pivots ................................................................. 48
Pocket Filler ..................................................... 38
Pocket Reducer .............................................. 38
Push/Pull ......................................................... 47 Hallet ............................................................ 47 Knob ............................................................. 51 Lever ............................................................. 51 Paddle .......................................................... 51 Standard ...................................................... 47 Wire ............................................................... 47
Removable Mullion ...................................... 53
Rim Cylinder ................................................... 50
Sash ............................................................12, 39
Strike .................................................................. 51
Surface Mounted Closer ............................ 49
Swing of Doors .................................................2
Sweep, Door Bottom ................................... 50
The Basic Three ................................................3
Thresholds ....................................................... 46
Touch up Spray Paint ................................... 50
Vinyl, glazing ................................................... 52
Weather-strip .................................................. 52
Wide Stile Door ................................. 3, 10-11
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 5.© 9/2015
Rebco’s in Front! ! !
GENERAL SPECIFICATIONSEntrance doors shall be as detailed and manufactured by REBCO, Incorpo-rated, Paterson, NJ.
MATERIALS – Sections shall be extruded 6063-T5 aluminum alloy and temper suitable for special anodic finishing. Major tubular portions of door stiles and rails shall be a nominal .125" thickness and glazing molding shall be .050" in thickness. Material dimensions are subject to normal aluminum extrusion tolerances.
WORKMANSHIP – Entrance units shall be completely factory assembled and include doors, frames, sidelights, transoms and hardware as required. Corners of doors shall be accurately joined and fitted with a flush hairline joint. Doors shall be of triple reinforced construction having reinforced anchor blocks, coin punched, interlocked into the top and bottom rails, bolted to the stiles and secured in place with dome lock washers, then welded at the top and underside of each corner. The weld shall thoroughly penetrate the material and produce a complete fusion of metal between stiles and rails. All welding shall be on unexposed surfaces to prevent pitting, discoloration, weld halo or other surface imperfections. No mechanical joints will be permitted. Glaz-ing of doors shall be of E.P.D.M. or of vinyl type gasket. No screws shall be needed to secure glazing stops in place. Standard stops are available for 1/4", 5/8" and 1" glazing. Special taller stops for 1" glazing are also available. All cutouts, recesses, mortising or milling operations required for hardware shall be accurately made and reinforced with backing plates as required to insure adequate strength of the connection.
Lock stiles for single doors shall be beveled type. Lock stiles for pairs of doors shall be two-piece with adjustable nosing and rubber grommets for ease of adjustment. Meeting stiles at pairs of doors shall each have adjustable two piece nosing and stile, one of which shall have two continuous weather piles for maximum weathering between doors.
Doors (without intermediate rails) shall be equipped with top rail adjustment screws for minor field adjustments after installation. All fasteners for push and pull hardware shall be stainless steel. Butt hinges shall be full mortise, non-ferrous ball bearing hinges.
PERFORMANCE REQUIREMENTS – Entrance units shall meet the following performance criteria: (Testing procedures and certified test results available on request).
Air Infiltration: For single acting offset pivot or butt hung entrances in the closed and locked position, the test specimen shall be tested in accordance with ASTM E 283 at a pressure differential of 6.24 psf for single doors and 1.57 psf for pairs of doors. A single 3'0" x 7'0" entrance door and frame shall not exceed 0.05 cfm per linear foot of perimeter crack. A pair of 6'0" x 7'0" entrance doors and frame shall not exceed 1.0 cfm per linear foot of perimeter crack. (Blade gasket strip in an aluminum extrusion applied to the exterior surface of the bottom rail with exposed fasteners necessary to meet the specified performance test results.)
Structural: Corner strength shall be tested according to REBCO's dual moment load test procedure and certified by an independent testing laboratory to ensure weld compliance and corner integrity.
Structural Uniform Load Test: Single doors: 90 psf Pair of doors: 60 psfForced Entry Resistance:300 lbs. inward and outward without failure.
FINISH – All exposed surfaces including the edges of stiles shall be finished. Standard available finishes are as follows: Clear anodized, Dark bronze hardcoat and White electrostatically applied polyester paint. Other custom finishes are available.
HARDWARE – Hardware for aluminum entrance doors shall be furnished and/or installed by the door manufacturer and shall include the following items: Push-Pull Hardware, Maximum Security Deadlock with Cylinders, Flush Bolts (pairs of doors only), Center Pivots, Offset Pivots, Butt Hinges, Continu-ous Hinges, Thresholds, and, as specified, Concealed Overhead Closer, Floor Closer or Overhead Surface Closer.
SUPER STRENGTH SERIES "N" - Narrow Stile Door – Standard door thickness of 1-3/4" with 2" vertical stiles, 2-3/4" top horizontal rail and 3-7/16" bottom horizontal rail. A 6-13/16" or 10" bottom horizontal rail, as well as other available horizontal rails may be substituted for extra strength and design flexibility.
SUPER STRENGTH SERIES "M" - Medium Stile Door – Standard door thickness of 1-3/4" with 3-1/2" vertical stiles, 3-7/16" top horizontal rail and 6-13/16" bottom horizontal rail. A 10" bottom horizontal rail, as well as other available horizontal rails may be substituted for extra strength and design flexibility.
SUPER STRENGTH SERIES "W" - Wide Stile Door – Standard door thickness of 1-3/4" with 5" vertical stiles, 5" top horizontal rail and 6-13/16" bottom horizontal rail. A 10" bottom horizontal rail, as well as other available horizontal rails may be substituted for extra strength and design flexibility.
MID-RAILS – Extruded aluminum mid-rails of 3/8", 2", 3", 4-1/2", 5-3/4", 7-9/16", and 10" are available to add greater strength and durability, conceal an exit device from view or divide the glazing area of the door.
ALUMINUM PANEL INSERTS – Double face, textured-finish aluminum panel inserts for use below extruded aluminum mid-rails are available in 1/4", 1" and 1-1/2" thickness to effectively meet the demands of high traffic areas.
TRUE DIVIDED LITES – Vertical and horizontal 3/8" solid intermediate rails, welded in place to form various grid patterns are available and provide the strength and flexibility not available from surface applied or internal muntins.
A full line of custom, Designer Series entrance doors is also available.
INSTALLATIONS INCLUDE:– Statue of Liberty, New York Harbor, NY– New York University, New York, NY– LaGuardia Airport, Queens, NY– I.B.M. Poughkeepsie, NY– General Electric, Allentown, PA– Merrill Lynch, Lakewood, NJ– U. S. Naval Base, Philadelphia, PA– State University of New York, Binghampton, NY– Port Authority Bus Terminal, New York, NY– Police Headquarters, New York, NY– Pennock Library, Pennock, Michigan– U. S. Military Academy, West Point, NY– The Good Samaritan Hospital, Baltimore, Maryland– Newark Main Post Office, Newark, NY– Port Authority, World Trade Center, New York, NY– New York Public Library, New York, NY– Squadron Operations, Andrews Air Force Base, Washington, DC– Rutgers University Library, New Brunswick, New Jersey– Kentucky Fried Chicken Stores throughout NYC– Con Edison, New York, NY
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 01186. © 9/2015
Rebco’s in Front! ! !
NARROW STILE ENTRANCE DOORS
41- 008
41- 001 (Adjustable)
41- 002 (Adjustable)
41- 008
B
A A B ARev.
A
D
E
D
E
FCenter Hung
FCenter Hung
FCenter HungF
MEETING STILE FOR ALL PAIRS OF DOORS
1 3/4"
2 1/16" 2
1/16"
41- 009
HINGE STILE
41- 009
LOCK STILE41-161 41-161
A A
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 7.© 9/2015
Rebco’s in Front! ! !
NARROW STILE ENTRANCE DOORS
41- 008
F
2 3/4"
1 3/4"
41- 012
TOP RAIL
D
3 7/16"
41- 013
BOTTOM RAIL
E
FOR CENTER HUNG DOORS
Finger Guard, made of vinyl material, prevents pinching of fingers between the hinge stile of door and the jamb section.
41- 008
FINGER GUARDapplied to jamb
2 1/8" 1"
FALT.
1/8"
FOR CENTER HUNG DOORS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 01188. © 9/2015
Rebco’s in Front! ! !
3 1/2" MEDIUM STILE DOOR
A A BA
D
E
D
E
ARev.
FCenter
Hung
FCenterHung
FCenter HungF
1 3/4"
3 1/2"
41-359
HINGE STILE41-161
A
1 3/4"
3 1/2"
41- 359
LOCK STILE41-161
A
6 13/16"
1 3/4"
41- 014
BOTTOM RAIL
E
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 9.© 9/2015
Rebco’s in Front! ! !
3 1/2" MEDIUM STILE DOOR
D
3 7/16"
1 3/4"
41- 013
TOP RAIL
41- 358
F
41- 002 (Adjustable)
41- 35841- 358
B
41- 001 (Adjustable)
41- 002 (Adjustable)
MEETING STILE FOR ALL PAIRS OF DOORS
FOR CENTER HUNG DOORS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011810. © 9/2015
Rebco’s in Front! ! !
5"
1 3/4"
41- 509
HINGE STILE
41- 161
A
41- 50841- 508
B
41- 001 (Adjustable)
41- 002 (Adjustable)
5"
1 3/4"
41- 509
LOCK STILE
41- 161
A
1/2 SIZE DETAIL
MEETING STILE FOR ALL PAIRS OF DOORS
5" WIDE STILE DOOR
A A BA
D
E
D
E
ARev.
FCenter Hung
FCenter Hung
FCenter HungF
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 11.© 9/2015
Rebco’s in Front! ! !
5" WIDE STILE DOOR
5"
1 3/4"
41- 015
TOP RAIL
D
41- 508
F
41- 002 (Adjustable)
FOR CENTER HUNG DOORS
6 13/16"
41- 014
BOTTOM RAIL
E
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011812. © 9/2015
Rebco’s in Front! ! !
5"
1 3/4"
41- 015
22- 842TTransom Conditionfor 1/4" Glazing
4517- OH CONCEALED OVERHEAD CLOSER
Shown is a typical 1-3/4" x 4-1/2" framing detail. Other sized headers are available on request and willbe used with other members.
45- OHF
TOP RAIL
C.O.C CONDITIONS
22-620T SASH Transom Condition
for 1" Glazing
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 13.© 9/2015
Rebco’s in Front! ! !
A A
C D
DECO-PANEL
41-009narrow stile
41-359 ormedium stile
41-509wide stile
A
41-009narrow stile
41-359 ormedium stile
41-509wide stile
A
1 3/4"
10"
41- 020
41-161
C
1 3/4"
10"
41- 020
41- 045
41- 161
D
Can be inserted into Rebco's Narrow, Medium or Wide Stile Doors.
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011814. © 9/2015
Rebco’s in Front! ! !
4 1/2"
1 3/4"
41- 045
INTERMEDIATE RAIL FOR
WIDE STILE DOOR
INTERMEDIATE DOOR RAILSCAN ALSO BE USED AS VERTICAL RAILS
1 3/4"
3/8" 41- 020
41- 161
2"
1 3/4"
41- 030
INTERMEDIATE RAIL FOR
NARROW STILEDOOR
3"
41- 035
INTERMEDIATE RAIL FOR
MEDIUM STILE DOOR
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 15.© 9/2015
Rebco’s in Front! ! !
41- 010
41- 011
10"
10"INTERMEDIATE
RAIL
41- 010
10"
10"BOTTOM RAIL
FOR ANY NARROW, MEDIUM
OR WIDE STILE DOOR
INTERMEDIATE DOOR RAILS
CAN ALSO BE USED ASVERTICAL RAILS
41- 020
41- 020
1 3/4"
1/2"
5 3/4"
1/2"
1/2"
41- 020
41- 161
5" x 1-3/4"TUBE
1/2"
41- 020
7 9/16"
41- 014
BOTTOM RAIL
E
1/2 SIZE DETAIL
1/2 SIZE DETAIL
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011816. © 9/2015
Rebco’s in Front! ! !
KICKPLATES
BOTTOM RAIL
A
1/2"
1/2"
1 3/4"
41- 030
INTERMEDIATE RAIL
41- 013narrow stile
typical
ALUMINUM KICKPLATEup to 36" high,and .080" or .125" thick.
Kickplates 24" high and above require additionalintermediatesfor strengthunless otherwisespecified.
Please specifyKickplate thickness(.080 or .125)
A1/2" REVEAL AROUND KICKPLATE ON NARROW, MEDIUM AND WIDE STILE DOORS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 17.© 9/2015
Rebco’s in Front! ! !
1/2" GlazingBead
3/8"Intermediate
Various Grid Configurations Available Upon Request.
Call for Pricing.
GRID CONSTRUCTION
DOOR GRIDS
COLONIAL 6 AND 9 LITE GRIDS
KNOB LOCKSTANDARD PUSH/PULL
ALTERNATE GLAZING BEADS
1" Glass
1/4" Glass 5/8" Glass
41
-16
5
41
-16
5
41
-16
5
41
-16
1
41
-16
1
41
-16
1
1" Glass
41
-26
5F
Special 1" GlazingAvailable at additional cost
41
-26
5G
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011818. © 9/2015
Rebco’s in Front! ! !
D
3 7/16"
1 3/4"
41- 013
TOP RAIL
A A B Arev.
A
D
G
H
E
COLONIAL DOORS
6 13/16"
41- 014
BOTTOM RAIL
E
GINTERMEDIATE
RAIL
41- 500
3"
41- 035
3/8"
41- 020
41- 161
H
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 19.© 9/2015
Rebco’s in Front! ! !
COLONIAL DOORS
1 3/4"
3 1/2"
41- 359
HINGE STILE41-161
A
1 3/4"
3 1/2"
41- 359
LOCK STILE41-161
A
41- 35841- 358
B
41- 001 (Adjustable)
41- 002 (Adjustable)
MEETING STILE FOR ALL PAIRS OF DOORS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011820. © 9/2015
Rebco’s in Front! ! !
1/4" OR 1" PANEL DOORSALTERNATE GLAZING BEADS ALLOWS FOR GLAZING OF 1/4", 5/8" OR 1"
A
BF
A
SHOWN TYPICAL 1/4" GLAZING
SHOWN TYPICAL 1" GLAZING
D
E
G
41- 008WITH 1"PANEL
B B
41- 008
41- 165 41- 001 (Adjustable)
41- 002 (Adjustable)
1 3/4"
2 1/16" 2
1/16"
41-009
HINGE STILEWITH
1/4" PANEL 41-161 41-161
A41-009
LOCK STILEWITH
1/4" GLAZING
A
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 21.© 9/2015
Rebco’s in Front! ! !
1/4" AND 1" PANELS
3 7/16" BOTTOM RAIL
E
41- 013WITH 1/4"
PANEL
41- 161
2"
41- 030
FINTERMEDIATE
RAIL
41
-16
5
41
-16
5
2"
41- 030WITH 1"PANEL
GINTERMEDIATE
RAIL
2 3/4"
1 3/4"
TOP RAIL
D
41- 012WITH 1/4"
PANEL
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011822. © 9/2015
Rebco’s in Front! ! !
1-1/2" PANELALTERNATE GLAZING BEADS ALLOWS FOR GLAZING OF 1/4", 5/8" OR 1"
2 1/16"
HINGE STILEWITH
1-1/2" PANEL
41-500
A C
2 1/8"
41- 009
41-165
41-165
LOCK STILEWITH
1" GLAZING
41- 009
41- 008WITH 1-1/2"PANEL
B B
41- 008
41- 500 41- 001 (Adjustable)
41- 002 (Adjustable)
A B F
J GA C
D
E
H
A
SHOWN TYPICAL 1" GLAZING
SHOWN TYPICAL 1/4" GLAZING
SHOWN TYPICAL 1/4" GLAZING
SHOWN TYPICAL 1/4" GLAZING
F
HINGE STILEWITH
1-1/2" PANEL
41- 009
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 23.© 9/2015
Rebco’s in Front! ! !
1-1/2" PANEL
2 3/4"
TOP RAIL
D
41- 012WITH
1-1/2"PANEL
3 7/16" BOTTOM RAIL
E
41- 013WITH
1-1/2"PANEL
2"
41- 030WITH 1-1/2"
PANEL
GINTERMEDIATE
RAIL
41- 500
3/8"
H
1 3/4"
3/8"
41- 020
41- 500
41-161
J
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011824. © 9/2015
Rebco’s in Front! ! !
.450 TWINFELTFUZZY
THRESHOLD BY OTHERS
.063"SMOOTH
ALUMINUMFACE SHEETS
.063"SMOOTH
ALUMINUMFACE SHEETS
.063" SMOOTHALUMINUMFACE SHEETS
11/2"
23/8"
3/16"1/4"
11/2" 6"
6"
OPTIONAL3/8"SECONDARYTIE ROD
OPTIONAL 3/8"SECONDARYTIE ROD
3/8" TIE RODTHRU SPLINE
BOTTOM RAIL
3/8" TIE RODTHRU SPLINE
TOP RAIL
TOP & BOTTOM RAILS
1/8" CLOSERREINFORCEMENT
OPTIONAL 3/8"SECONDARYTIE ROD
25 PSI. POLYSTYRENE
25 PSI.POLYSTYRENE
E D
FULL FLUSH DOORSFor VISION LITES, see page 36.
B A
A C
D
E
F
G
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 25.© 9/2015
Rebco’s in Front! ! !
FULL ALUMINUM FLUSH DOORSSIDE RAILS
DOOR FRAME
FOR GEAR HINGE
.063 SMOOTHALUMINUM FACE SHEETS
.063 SMOOTHALUMINUM FACE SHEETS
3/8" TIE RODS WITH LOCKING NUTS
REPLACEABLE BEVELED EDGE TRIM
25 PSI. POLYSTYRENE
25 PSI. POLYSTYRENE
35/8"
1/8"
11/32"
C
A
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011826. © 9/2015
Rebco’s in Front! ! !
FULL FLUSH DOORS
CLOSEUP
TYPICAL PAIR OF DOORS
REPLACEABLE BULL NOSE TRIM
REPLACEABLE BULL NOSE TRIM
35/8"
.063 SMOOTH ALUMINUM FACE SHEETS
.063 SMOOTH ALUMINUM FACE SHEETS
25 PSI. POLYSTYRENE
3/8" TIE RODS WITH LOCKING NUTS
25 PSI. POLYSTYRENE
3/16"
B
B
B
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 27.© 9/2015
Rebco’s in Front! ! !
FULL FLUSH DOORS
INACTIVE LEAF
ACTIVE LEAF
.063 SMOOTH ALUMINUM FACE SHEETS
3/8" TIE RODS WITH LOCKINGNUTSREPLACEABLE
BEVELEDEDGE TRIM
25 PSI. POLYSTYRENE
3 5/8"
PAIR OF DOORS FOR MORTISE EXIT/FLUSH BOLTS
25 PSI. POLYSTYRENE
CLOSEUP
PARALLELBEVELED LOCK EDGES
B
B
B
.063 SMOOTH ALUMINUM FACE SHEETS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011828. © 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-350
.450 TWINFELT FUZZY
THRESHOLD BY OTHERS
11/2"
23/8"
3/16"1/4"
11/2" 6"
6"
OPTIONAL3/8"SECONDARYTIE ROD
OPTIONAL 3/8"SECONDARYTIE ROD
3/8" TIE RODTHRU SPLINE
BOTTOM RAIL
3/8" TIE RODTHRU SPLINE
TOP RAIL
1/8" CLOSERREINFORCEMENT
OPTIONAL 3/8"SECONDARYTIE ROD
.120 FIBERGLASSRESIN PANELSwith UV INHIBITORS
.120 FIBERGLASSRESIN PANELSwith UV INHIBITORS
25 PSI.POLYSTYRENE
25 PSI. POLYSTYRENE
D
E
B A
A C
D
E
F
G
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 29.© 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-350
V-350 SIDE RAILS
DOOR FRAME
FOR GEAR HINGE
3/8" TIE RODS WITH LOCKING NUTS
REPLACEABLE BEVELED EDGE TRIM
25 PSI.POLYSTYRENE
25 PSI.POLYSTYRENE
35/8"
1/8"
11/32"
35/8"
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
.120 FIBERGLASS RESINPANELS with UV INHIBITORS
A
C
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011830. © 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-350
INACTIVE LEAF
ACTIVE LEAF
3/8" TIE RODS WITH LOCKINGNUTSREPLACEABLE
BEVELEDEDGE TRIM
25 PSI.POLYSTYRENE
3 5/8"
PAIR OF DOORS FOR MORTISE EXIT/FLUSH BOLTS
25 PSI. POLYSTYRENE
CLOSEUP
PARALLELBEVELED LOCK EDGES
.120 FIBERGLASS RESINPANELS with UV INHIBITORS
.120 FIBERGLASS RESINPANELS with UV INHIBITORS
B
B
B
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 31.© 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-350
CLOSEUP
TYPICAL PAIR OF DOORS
REPLACEABLE BULL NOSE TRIM
REPLACEABLE BULL NOSE TRIM
35/8"
25 PSI. POLYSTYRENE
3/8" TIE RODS WITH LOCKING NUTS
25 PSI. POLYSTYRENE
3/16"
.120 FIBERGLASS RESINPANELS with UV INHIBITORS
.120 FIBERGLASS RESINPANELS with UV INHIBITORS
B
B
B
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011832. © 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-600
V-600 - AL DOOR
.450 TWINFELT FUZZY
THRESHOLD BY OTHERS
11/2"
23/8"
3/16"1/4"
11/2" 6"
6"
OPTIONAL3/8"SECONDARYTIE ROD
OPTIONAL 3/8"SECONDARYTIE ROD
3/8" TIE RODTHRU SPLINE
BOTTOM RAIL
3/8" TIE RODTHRU SPLINE
TOP RAIL
TOP & BOTTOM RAILS
1/8" CLOSERREINFORCEMENT
.120 FIBERGLASSRESIN PANELSwith UVINHIBITORS
.120 FIBERGLASSRESIN PANELSwith UV INHIBITORS
D
E
B A
A C
D
E
F
G
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 33.© 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-600
V-600 SIDE RAILS
DOOR FRAME
FOR GEAR HINGE
3/8" TIE RODS WITH LOCKING NUTS
REPLACEABLE BEVELED EDGE TRIM 25 PSI. POLYSTYRENE
25 PSI. POLYSTYRENE
53/4"
1/8"
11/32"
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
C
A
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011834. © 9/2015
Rebco’s in Front! ! !
CLOSEUP
TYPICAL PAIR OF DOORS
REPLACEABLE BULL NOSE TRIM
REPLACEABLE BULL NOSE TRIM
53/4"
25 PSI. POLYSTYRENE
3/8" TIE RODS WITH LOCKING NUTS 3/16"
25 PSI. POLYSTYRENE
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
B
B
B
FRP ENTRANCE V-600
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 35.© 9/2015
Rebco’s in Front! ! !
FRP ENTRANCE V-600
INACTIVE LEAF
ACTIVE LEAF
3/8" TIE RODS WITH LOCKING NUTSREPLACEABLE BEVELED
EDGE TRIM
53/4"
PAIR OF DOORS FOR MORTISE EXIT/FLUSH BOLTS
CLOSEUP
25 PSI. POLYSTYRENE
25 PSI. POLYSTYRENE
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
.120 FIBERGLASS RESIN PANELSwith UV INHIBITORS
PARALLEL BEVELED LOCK EDGES
B
B
B
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011836. © 9/2015
Rebco’s in Front! ! !
VISION LITES FOR FRP and FULL FLUSH DOORS
1" GLASS
VISION LITEMOLDINGS
25 PSI.POLYSTYRENE
1/4" GLASS
VISION LITEMOLDINGS .120 FIBERGLASS
RESIN PANELSwith UV INHIBITORS
25 PSI.POLYSTYRENE
.120 FIBERGLASSRESIN PANELSwith UV INHIBITORS
25 PSI.POLYSTYRENE
.120 FIBERGLASSRESIN PANELS
with UV INHIBITORS
25 PSI.POLYSTYRENE
.120 FIBERGLASSRESIN PANELSwith UV INHIBITORS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 37.© 9/2015
Rebco’s in Front! ! !
DOORS WITH LOUVERS
41-009
41-009
HINGE STILEWITH
1-1/2" PANEL
41-500
41-500
A
LOCK STILEWITH
1-1/2" PANEL
C
41-110
H
41-110
G
28 - 40016'0" Louver Extrusion1-1/2" Deep
2 3/4"
TOP RAIL
D
41- 012WITH
1-1/2"PANEL
A C
D
G
H
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011838. © 9/2015
Rebco’s in Front! ! !
1-1/2"
42 - 017
2"
42 - 019
2"
42 - 018
T 450 - PFPocket Filler
T 450 - DSSnap-in Door Stop
T 451- PFPocket Filler
T 451- DSSnap-in Door Stop
T 451- PRPocket Reducer
1/4"
1/4"
22 - 620T
22 - 842 T
22 - 841
DOOR STOPS AND FILLERS
SASH
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 39.© 9/2015
Rebco’s in Front! ! !
NARROW STILE DOOR SHOWN
A DCBB
H
J
I
G
F
E
A B B C D
E
F
G or Alt.G
H
I
J
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
OFFSET DOOR SHOWN
WITH OPEN BACK TUBE FRAMING
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011840. © 9/2015
Rebco’s in Front! ! !
MEDIUM STILE PAIR OF DOORS SHOWN
GAlt.
OptionalCorner
MK L
P
O
N
A B K L M
E
F
G or Alt.G
N
O
P
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
CENTER HUNG DOOR SHOWN WITH
CONCEALED OVERHEAD CLOSER
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 41.© 9/2015
Rebco’s in Front! ! !
NARROW STILE DOOR SHOWN
A DCBB
H
J
I
G
F
E
A B B C D
E
F
G or Alt.G
H
I
J
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
OFFSET DOOR SHOWN
WITH CLOSED BACK TUBE FRAMING
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011842. © 9/2015
Rebco’s in Front! ! !
MEDIUM STILE PAIR OF DOORS SHOWN
GAlt.
OptionalCorner
MK L
P
O
N
A B K L M
E
F
G or Alt.G
N
O
P
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
CENTER HUNG DOOR SHOWN WITH
CONCEALED OVERHEAD CLOSER
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 43.© 9/2015
Rebco’s in Front! ! !
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASSCENTER HUNG DOOR SHOWN WITH CONCEALED OVERHEAD CLOSER & OPEN BACK TUBE FRAMING
F
E
G
OptionalCorner
MEDIUM STILE PAIR OF DOORS SHOWN
ML
K
A B K L M
E
F
G
N
O
P
A B
GAlt.
P
O
N
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011844. © 9/2015
Rebco’s in Front! ! !
F
E
G
OptionalCorner
MEDIUM STILE PAIR OF DOORS SHOWN
L
K
P
O
A B
GAlt.
M
N
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASSCENTER HUNG DOOR SHOWN WITH CONCEALED OVERHEAD CLOSER & CLOSED BACK TUBE FRAMING
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 45.© 9/2015
Rebco’s in Front! ! !
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASSSHOWN IN THERMAL BREAK VERSION WITH OFFSET DOOR
OptionalCorner
F
E
I
H
G
BA B C
NARROW STILE DOOR SHOWN
D
J
A B B C D
E
F
G
H
I
J
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011846.
Rebco’s in Front! ! !
© 11/2015
THRESHOLDS
5" x 1/2"
62-050
62-057 - PPanic Thresholds
62-060
7" x 1/2"
62-070
4-1/2" x 1/2"
62-058W
4" x 1/2"
62-040
shown 50% scale
62 - 010 10" x 1/2"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 47.© 9/2015
Rebco’s in Front! ! !
HARDWARE - PUSH/PULLS
64-102Push Bar As-
sembly
64-103Standard Pull Handle
12" Long – 10-3/8" C/L
64-108Offset Wire Push/Pull
Special OrderStraight Wire Pull
64-189Push/Pull Combo
(Push/Push only, available).(Pull/Pull only, available).
64-106Hallet Pull
(special order)
Shown above is Rebco's standard hardware. Custom hardware is available on request.
64-126Crash Bars
64-110"V" Wire Pull Handle
(special order)
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011848. © 9/2015
Rebco’s in Front! ! !
HARDWARE - PIVOTS, BUTTS
64-384Full Surface Continuous Hinge
64-340Offset Pivots
64-341Intermediate Pivot
64-344Center Hung
Bottom Pivot SetDoor & Threshold Portion
64-346Center Hung Top Pivot – Frame Portion
"Walking Beam"
64-345Center Hung Top Pivot – Door Portion
Channel with Bushing
64-381Butt Hinge
64-384FMFull Mortised Continuous Hinge
Door Leaf Door AlignmentFlange
Frame Leaf
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 49.© 9/2015
Rebco’s in Front! ! !
MountingClips
C.O.C Cover Plate
Offset Arm
Slide Channel
Channel Door Stop
Concealed Overhead CloserFor Offset Doors with Brackets and Arm
Parallel Arm
HARDWARE - CLOSERS
Surface MountedCloser
with Regular ArmH.O. available upon request
MountingClips
C.O.C Cover Plate
End Load Arm
Concealed Overhead CloserFor Center Hung Doors with Brackets and Arm
Drop PlateFor Easy Mounting of Surface Mounted Closer on Door Frame
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011850. © 9/2015
Rebco’s in Front! ! !
HARDWARE - CYLINDERS & FLUSH BOLTS
64-324Solid Brass Rim Cylinder
64-321 64-ESC 64-323 64-325 REBCO Solid Brass Escutcheon Solid Brass Thumb Dummy Cylinder Mortise Cylinder Turn Cylinder
BEST
64-BWC (With Construction Core)
Best Mortise Cylinder (special order)
MISCELLANEOUS
REBCOINCORPORATED
"DURO"
TOUCH UP SPRAY
42-080 42-079 68-103 Door Bottom Sweep Crash Chain Touch Up Spray Pain
64-450 64-460 Drop Arm Door Holder Mail Slot
41-100Finger Guard
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 51.© 9/2015
Rebco’s in Front! ! !
64-313Regular Latch
Lock Strike64-330
Complete Flush Bolts
HARDWARE - LATCH LOCKS, HANDLES
64-301Adams Rite Maximum
Security LockADAMS RITE MFG. CO. ADAMS RITE MFG. CO. ADAMS RITE MFG. CO.
64-303M.S. + 1890 Hook Lock & Latch Lock
ADAMS RITE MFG. CO.
64-307Adams Rite
ShortThrow Lock
ADAMS RITE MFG. CO.
ADAMS RITE MFG. CO.
64-308Latch Lock(Handed)
64-312Push or Pull Paddle
64-314Adams Rite
ElectricRelease
64-310Lever Handle w/Cam
64-311Short Lever Handle w/Cam
64-318 Passage SetKnob Lock without Key Way
Passage Set for MS or WS Door Only
64-319Knob Lock with Key WayFor MS or WS Door Only
64-313RRetro-fit Strike
64-TSUDeadbolt/Latch
Combo, MS1890 Lock, Cylinder, T-Turn, and
Lever Both Sides
ADAMS RITE MFG. CO.
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 011852. © 9/2015
Rebco’s in Front! ! !
ASTRAGALS
41-050Optional Security Astragal for Pair of Doors
41- 002
41-008narrow stile
41-358 ormedium stile
41-508wide stile
41-008narrow stile
41-358 ormedium stile
41-508wide stile
41-051Optional Security Astragal for Single Door
41-008narrow stile
41-358 ormedium stile
41-508wide stileJAMB
GLAZING BEADS & WEATHERSTRIP PILES
41 - 060 Used with 42 - 018 Door Stop
Comes in gray only
41 - 061Used with T450-DS, T 451-DS,
and 42 - 017 Door StopCan be used in Panic Thresholds
Comes in gray only
42 - 258AUsed with 41 - 161 Door Stop
42 - 258Used with 42 - 017, 41 - 165 and 41-265
Comes in black or white
41 - 063Used with 41 - 002
Door NosingComes in gray or black
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
Outside NY/NJ 800 -777 - 0787 • NJ 973-684- 0200 • NY 212 -736 - 6435 • FAX 973- 684 - 0118 53.© 9/2015
Rebco’s in Front! ! !
Series 8800Rim Device
HARDWARE - PANICS & EXIT DEVICES
Series 8600Vertical Rod Device
Series 8400Mortise Device
64-8475 – Mortised In-Line Panic
64-8675 – Concealed Rod In-Line Panic
64-RM7Removable Mullion
ADAMS RITE MFG. CO.
1171-1225 Madison Ave., P.O. Box 2248Paterson, New Jersey 07509-2248
Outside NY/NJ: 800-777-0787
NJ: 973-684-0200NY: 212-736-6435FAX: 973-684-0118WEB: www.REBCOinc.com
Rebco’s in Front!!!
REBCO stocks the largest selection of architectural aluminum shapes in the New York Metropolitan area, and serves the glass industry from coast to coast!
Whatever your needs, from narrow stile to
FRP doors or entrances – hoppers, vents,
casement and fixed windows – storefront
systems – sheets or panels – angles, bars
– channels or stock lengths, REBCO offers
the products you need to meet
your specifications.
Window Systems
Storefront Systems
We carry a complete line of storefront extrusions from pressure wall, seamless
mullion and flush glaze systems down to division bars, sash, and bar stock –
all available in a variety of finishes. We work with custom color application experts
to match existing building trims and are adept at matching logo colors and un-
usual colorations. But don’t be fooled by the pretty face. Behind each facade is a
well constructed enclosure.
Other Fine REBCO Products