DONG XUYEN PORT JOINT STOCK COMPANYdongxuyenport.com.vn/Uploads/files/PROFILERepair... · Dong...
Transcript of DONG XUYEN PORT JOINT STOCK COMPANYdongxuyenport.com.vn/Uploads/files/PROFILERepair... · Dong...
DONG XUYEN PORT JOINT STOCK COMPANYAdd: Dong Xuyen Industrial Zone, Rach Dua Ward, Vung Tau City
Phone: 064. 3613761 Fax: 064. 3613861Website: www.dongxuyenport.com.vn
Page 1
COMPANY PROFILEDONG XUYEN PORT JOINT STOCK COMPANY(REPAIRING OVERHAUL AND MAINTERNANCE FOR VESSELS)
Vung Tau - 2015
Page 2
TABLE OF CONTENTI. INTRODUCTION .......................................................................... 3
1.1. General Information...................................................................... 3
1.2. About Us....................................................................................... 3
1.3. Management System Certificates ................................................. 4
II. PERSONNEL CAPABILITIES...................................................... 7
2.1 Management Board ..................................................................... 7
2.2 Organisation Chart ....................................................................... 7
2.3 Human Resources........................................................................ 7
2.4 List of Key Personnel.................................................................... 8
2.5 Professional Certificates ..............................................................11
2.6 Professional Awarded Certificates ...............................................16
III. INFRASTRUCTURE AND EQUIPMENT CAPABILITY.............. 19
3.1 Infrastructure Capability for repair and maintenance services. ….19
3.2 Equipment Capability for repair and maintenance services..........19
3.3 Overall Pictures of Infrastructure and Equipment Capability. .......22
IV. REPAIR – MAINTENANCE SERVICES AND PROVISION OFEQUIPMENT – SPARE PART ................................................... 38
4.1 Repair – Maintenance Services ...................................................38
4.2 Provision of Equipment – Spare Part ...........................................39
4.3 Provision of Manpower for Offshore Services ..............................39
4.4 Pictures of Services have been providing: ...................................40
Page 3
I. INTRODUCTION1.1. General Information
Company name: DONG XUYEN PORT J.S COMPANY Address: Road No.12, DongXuyen Industrial Zone, RachDua Ward, VungTau City. Tel: (+84) 64.3613.761 Fax: (+84) 64.3613.861 Website: www.dongxuyenport.com.vn Email: [email protected] Business Registration Certificate No.: 3501711472 issued by Department of
Planning and Investment of Ba Ria – Vung Tau Province. Type of Company: Joint Stock Company
1.2. About UsDong Xuyen Port Joint Stock Company was founded in Vung Tau city, Vietnam in 2010.Our aims is to supply base services for all companies that are located in Dong Xuyenindustrial Zone and neighbor areas of Ba Ria – Vung Tau Province. Our main servicesupply as follow: Repairing overhaul and maintenance of drilling rigs, vessels for oil & gas industry Construction and installation of industrial projects, Oil & Gas projects and Electrical
system up to 35 KV; Construction and installation E & I systems; Fabrication and assembly of mechanical packages, projects; Supply E & I equipment, materials and instruments; Manufacture electronic equipment; Calibration of E & I equipment/instruments; Maintenance of offshore projects, oil and gas projects, industrial plants; Supply paint and painting consumables for industrial, oil & gas projects; Lease construction equipment; Consultancy for construction and installation of oil and gas equipment.
With professional and experienced staffs that have joined in many projects such asInstallation of Main Boom Services for Liftboat H1017-Triyard; Repair andMaintenance Services for Liftboat H1016/H1030-Triyard; POS PTSC 01; Fabricationand Assembly Block of H1028/H1029 – M300/4 CLASS LIFTBOAT Project andvarious types of Projects with Foreign and Domestic Customers for Repair Ships andVessels; DONG XUYEN PORT J.S.C always brings best solutions to customers in Oiland Gas Industry with Fabrication, Construction, Installation and Maintenance of theirprojects through services provide by DONG XUYEN PORT.
Page 4
1.3. Management System Certificates
Page 5
Page 6
Page 7
II. PERSONNEL CAPABILITIES2.1 Management Board
- Chairman : Mr. Vũ Văn Đảo- Managing Director: Mr. Phạm Văn Vận- Leader of O & M Division: Mr. Vương Minh Thủy
2.2 Organisation Chart
2.3 Human ResourcesDONG XUYEN PORT J.S.C possesses a solid group of experts, engineers and skilledworkers with deep experience. Management Board : 05 persons. Purchase Team : 07 persons. HSEQ Team : 09 persons. Technician and Services : 267 persons.
ANTI CORROSIONCREW
ELECTRICIANCREW
SHAREHOLDERS’ GENERALASSEMBLY SUPERVISORY
BOAD
BOARD OFMANAGEMENT
BOARD OFDIRECTOR
HSEQ DIVE & I DIVISION
ADMIN & HRDIVISION
BUSINESS &COMMERCE DIV
ACCOUTING &FINANCE DIV
TECHNOLOGY &SERVICES DIV
WELDER CREWMECHANICCREW
Page 8
2.4 List of Key Personnel
No. Full name Major Experience Q.ty Position
I BOARD OF MANAGEMENT 5
1 Vũ Văn Đảo Mechanical Engineer –Bachelor of Laws 24 Chairman
2 Phạm Văn Vận Automation Engineer -Business Administrator 23 Managing
Director
3 Đặng Quang Đức Exploitation Engine 18 DeputyDirector
4 Vương Minh Thủy Drilling - ExploitationEngineer 15 Deputy
Director
5 Nguyễn Văn Ngãi Construction Engineer 15 DeputyDirector
II PURCHASE TEAM 7
6 Mạc Hải Long Transport Economics 14 Manager
7 Nguyễn Kiều Oanh EnvironmentalTechnology Engineer 6 Officer
8 Trần Huy Cường Bachelor of Logistics 4 Officer
9 Đinh Thị Tuyết Ngân Bachelor of Economics 2 Officer
10 Nguyễn Đình Phát Bachelor of Commerce 2 Officer
11 Vũ Duy Đức Bachelor of Logistics 3 Officer
12 Nguyễn Đức Năng Engineer 5 Officer
III HSEQ TEAM 9
13 Đinh Nho Lâm Mechanical Engineering 22 Manager
14 Đinh Văn Dũng Oil Refinery Engineer 6 HSE TeamLeader
15 Lê Đức Anh Mechanical Engineering 6 HSE Officer
16 Nguyễn Thanh Nhanh Transport Economics 6 HSE Officer
17 Nguyễn Hoài Trang HSE 6 HSE Officer
18 Phạm Tuấn Anh E & I Engineer 5 QC TeamLeader
19 Dương Thùy Linh International Business 4 QC Officer
20 Dương Hồng Phúc Electrical engineer 3 QC Officer
21 Trần Anh Toàn Electrical engineer 5 QC Officer
Page 9
VI TECHNICAL and SERVICES Department 267
A Port Service Team 33
22 Vương Minh Thủy Drilling - ExploitationEngineer 15 Leader of O &
M Division
23 Phạm Quốc Minh Civil engineer 8 Portcoodinator
24 Nguyễn Đình Hoàng Civil engineer 2 Supervisor
25 Nguyễn Ngọc Mạnh Electrical engineer 4 Supervisor
26 Nguyễn Văn Phiến Technician 22 Watchman
27 Skilled Workers 28 Worker
- Rigger Technician Over 4 8 Worker
- Fitter Technician Over 4 5 Worker
- Towing Manual Worker Technician Over 3 5 Worker
- Electrician Technician Over 3 4 Worker
- General worker N/A 6 Worker
B Anti-Corrosion Team 65
54 Phạm Quốc Minh Civil Engineer 8 Manager
55 Nguyễn Hải Nam Mechanical engineer 6 Supervisor
56 Văn Đức Quang Civil engineer 5 Supervisor
57 Nguyễn Đức Ninh Oil & Gas Equipmentengineer 2 Supervisor
58 Nguyễn Văn Huân Civil engineer 6 Supervisor
59 Skilled Worker Technician Over 5 60 Workers
- General Worker N/A Over 8 60 Workers
C Welder Team 45
118 Dương Văn Sơn Mechanical Engineer 18 Manager
119 Nguyễn Văn Huân Civil engineer 6 Supervisor
120 Nguyễn Đức Ninh Mechanical engineer 4 Supervisor
121 Lương Văn Dinh Mechanical engineer 12 Supervisor
122 Lê Vũ Lực Mechanical engineer 9 Supervisor
123 General Workers Over 6 40 Workers
- Welder Technician Over 5 16 Workers
- Fitter Technician Over 5 24
Page 10
D E & I Department 46
162 Lê Thanh Hà E & I Engineer 18 Manager
163 Nguyễn Văn Đạt Electrical Engineer 16 Vice Manager
164 Phạm Tuấn Anh E & I Engineer 5 QC Manager
165 Đinh Văn Dũng HSE Officer 7 HSE Manager
166 Phạm Lê Hải Anh E & I Engineer 5 Supervisor
167 Hồ Cảng Thắng Process engineer 18 Supervisor
168 Skilled Workers Over 5 40 Worker
- Fitter Technician Over 5 10 Worker
- Welder Technician Over 5 5 Worker
- Electrician Technician Over 5 5 Worker
- F.O.C splicing andtesting Technician Over 5 10 Worker
- General worker N/A N/A 10 Worker
E Mechanical Team 78
207 Đinh Nho Lâm Mechanical engineering 22 Manager
208 An Minh Luân Mechanical engineer 2 Supervisor
209 Phạm Văn Cường Mechanical engineer 2 Supervisor
210 Nguyễn Tiến Dũng Mechanical engineer 25 Supervisor
211 Hồ Cảng Thắng Process engineer 18 Supervisor
212 Bùi Quốc Hưng E & I Engineer 12 Supervisor
213 Nguyễn Văn Khanh E & I Engineer 5 Supervisor
214 Đinh Khắc Hải Electrician 5 Foreman
215 Đỗ Văn Bảy Electrician 5 Foreman
216 Phạm Đình Viễn Electrician 7 Foreman
217 Skilled Workers 68 Workers
- Fitter Technician Over 3 35 Workers
- Electrician Technician Over 3 3 Workers
- General worker N/A Over 3 30 Workers
Total Manpower 288
Page 11
2.5 Professional Certificates
Page 12
Page 13
Page 14
Page 15
Page 16
2.6. Professional Awarded Certificates
Page 17
Page 18
Page 19
III. Infrastructure and Equipment Capability3.1 Infrastructure Capability for repair and maintenance services Port and Fabrication Yard Capability The Dong Xuyen Port can be moored vessel with load capacity of 10.000 DWT. +
The length of Port : 240 m with 05 Nos , Anchor Port (110m)+ The Width of Port : Adjoining to river side+ Max Water Depth : - 9,40m+ Wharf level : + 2,50m
Fabrication yard with floor loading capacity 12 tons/ m2. Fabrication yard for super heavy equipment fabrication of Oil & Gas and other
industries with pile system that can load with 85 tons/ pile. Office for Dong Xuyen Port J.S.C and offices for rental partners. 3 phase transformers with total capacity 1,500 KVA. Fresh Water supply system. Firefighting and lightning systems
Mechanical Workshop: Including 5 Workshops Blasting and Painting Workshop Welding Workshop Spare Parts Repair Workshop. Mechanical Reinforcement Workshop Electrical & Instrument Workshop All Work is Conducting by experience Engineers and skilled Workers.
3.2 Equipment Capability for repair and maintenance services Equipment at Workshop:✓ Plate Bending Roll Biko✓ Four Lathe Machines: Reinforce industrial equipment with short and long diameter.✓ Twenty Welding Machines: Including AC, DC, Tig, Mig.✓ Three Drills: Including hand drills and drill bench.✓ Two Milling Machine: Reinforce industrial equipment with flat surface and
complicate forms.✓ Two Planers: Reinforce flat and perpendicular industrial equipment.✓ Four Grinders✓ Three Electric Motor Wrapping Machine Auxiliary Equipment: Air Compressor, Automatic Shearing Machine, Hydraulic
Measurement and Hydraulic Pump Equipment, Wind Pump, Hydraulic Jack andetc for Urgent works on Vessels.
Hand Equipment and Industrial Equipment for Services on Harsh and Hazardplaces of Vessels.
Page 20
Page 21
Page 22
3.3 Overall Pictures of Infrastructure and Equipment Capability.
Page 23
Page 24
1. Workshop1.1. Blasting and Painting Workshop
1.2. Welding Workshop
Page 25
1.3. Spare Parts Repair Workshop
1.4. Mechanical Reinforcement Workshop
Page 26
1.5. Electrical & Instrument Workshop
Page 27
2. EQUIPMENT AT WORKSHOP2.1 Lathe HOWA ST-650
Specifications
Model ST-650Producer JapanDiameter of Chuck 200-240 mmDistance Between Centers 800 mmSwing Over Machine Bed 500 mmSwing Over Cross Slide 230 mmSpindle Bore 52 mmSpindle Speed Range 60-1500 rpmChucks 3 jawsPower Rating 3.7 kWWeight 1500 KgDimensions (L x W x H) (2000 x 1000 x 1300) mm
Page 28
2.2 Milling Machine KASAHARA
SpecificationModel KS 630
Producer Nhật Bản
Swing Over Machine Bed 630 mm
Table Size 420 x 480 mm
Power Rating 3.7 kW
Dimensions (L x W x H) (2000 x 1000 x 1800) mm
Page 29
2.3 Lathe OKK RAMO
Specification
Model T-45-10ⅡProducer JapanDiameter of Chuck 230 mmDistance Between Centers 860 mmSwing Over Machine Bed 440 mmSwing Over Cross Slide 200 mmSpindle Bore 52 mmSpindle Speed Range 36-1600 rpmChucks 3 jawsWeights 2000 KgDimensions (L x W x H) (2500 x 1100 x 1300)mm
Page 30
2.4. Precision Surface Grinder – CNC - Chevalier
SpecificationTable Size 305 x 610 mmMax Grinding Length 700 mmMax Grinding Width 350 mm
Max. Distance from Table Surface toSpindle Centerline 630 mm
Grinding WheelGrinding Speed 1450v/p 50Hz – 1750v/p 60HzPower Rating 5.0HPStander Grinding Wheel (355 x 50 x127)mm
Dimensions - WeightsWeights 4500KgPacking Dimension (L x W x H) (2670 x 1830 x 2230)mm
Page 31
2.5 CNC Lathe MORI SEIKI
Specifications
Model SL-4Producer JapanYear of Production 1988Operating System SYSTEM 6TTravel Range X: 400 mm; Z: 800 mmAutomatic Tool Changer 10 EADiameter of Chuck 300 mmDistance Between Centers 800 mmSpindle Speed Range 3,500 rpmWeights 5500 Kg
Page 32
2.6. Lathe DAINICHI
Specifications
Model DLG-SH 63X350Producer Japan
Diameter of Chuck 400 mm
Distance Between Centers 3500 mmSwing Over Machine Bed 630 mmSwing Over Cross Slide 350 mmSpindle Bore 55 mmSpindle Speed Range 10-800 rpmChucks 4 jawsPower Rating 5.5 kWWeights 4000 KgDimensions(L x W x H) (5300 x 1100 x 1300)mm
Page 33
2.7. Centerless Grinding Machine - SHINKO
SpecificationsModel SKS-350Producer JapanDiameter 190 mmMin Grinding Length 125 mmStandar Grinding Wheel 300 mmGrinding Speed 23-150 rpmPower Rating 5.5 kWWeights 1000 KgDimensions (L x W x H) 1400 x 1000 x 1300 mm
Page 34
2.8 Plate Bending Roll Biko
Specifications
Model Biko - 843153
Producer ItalyMax. Thickness 680 mm
Number of Spindle 4
Power 380V – 50Hz
Weights 38000 Kg
Dimension (L X W X H) (6500 x 2800 x 2820)mm
Page 35
2.9. Milling CNC Machine - Millac 6VA
SpecificationsModel OKUMA-HOWA MILLAC 6VA
Producer Japan
Operating System OSP 5020
Travel X: 1300mm; Y: 650mm; Z: 550mm
Spindle Speed Range 4000 rpm
(Number of tool) ATC 24 EA ; BT 50
Table size (700x1300) mm
Weights 9500 Kg
Dimensions (DxRxC) 3300 x 2400 x 2800 mm
Page 36
2.10 . Dynamic Rotor Balancing Machine
2.11 Winch 20 tons
Page 37
2.12. Sand Blasting Machine
Page 38
IV. Repair – Maintenance Services and Provision of Equipment – Spare PartDong Xuyen Port is not only providing Logistics services but also focusing on
supply of repair and maintenance work for Barges, Ships and Vessels, and for Oiland Gas Industry.
4.1 Repair – Maintenance Services
Repair of Diesel Engine and Spare Parts
- Periodic Survey and Maintenance of Main Engine and Power Generator
- Recovery of High Pressure Cluster Pump and Fuel Injector
- Measure of Eccentricity of Spindle and Recover upon Request
- Repair and Maintenance of Machine Parts such as Compressor, Oil Filter andLubricant Filter.
- Survey and Repair of Spare Parts, Pumps, Boiler, Wind System, Boosting Systemand Windlass.
- Design and Fabrication of Spare Parts: Tube Expander and Dedicated Oil Pipeline
- Fabrication of Detail and Piece of Pumps (Valve, Shaft, etc…), and Gear Box
- Inspection and Calibration of Hydraulic System and Diesel Engine Control System
Industrial Hygiene
- Cleaning and Reserving Boiler, Cargo holder, Rust and Painting.
Welding
- Welding, Cutting and Renewing Pipeline and Spare Parts of Ships, Vessels
- Welding Hulls of Ship and Vessels based on Required Standard
- Fabrication and Reinforcement for Lid of Tank, Stairs and Ladder on Ships
Anti-corrosion: Method of Cleaning Hull- Cleaning by Solvent
- Cleaning by High-Pressure Water
- Cleaning by handwork
- Cleaning by instruments
- Cleaning by sand blasting
Page 39
Design and Installation of Control Panel and Electrical System
- Maintenance and Renew Power Generator AC – DC.
- Inspection for Maintenance work of Electric Motor
- Checking and Calibration for Insulation of Electricity
- Repair, Design and Installation of Electrical Control Panel
- Checking and Calibrating Electrical System of Ships and Vessels
4.2 Provision of Equipment – Spare Part Vessel
- Provision of Accessory, Machine for Maintenance and Repair work on Vessels:Piston, xec-mang, somi-xilanh and etc …
- Supply of Spare Parts: Valves, Pumps, Hand and Electrical Equipment for Vessels
Rig
- Supply of Spare Parts for Oil and Gas Industry. Dong Xuyen Port has establisheda long-term contract for providing Spare Part for PC Vietnam Limited
- Supply of Dedicated Valves and Pumps for Oil and Gas Industry: GRUNDFOSBrand
- Provision of Gas Measurement and Gas Detector: RIKEN KEIKI (Japan)
- Provision of High-Pressure Measurement, Relay, Sensor of YOKOGAMA andSONEL Brand
- Supply of Equipment for Installation, Maintenance and Repair of Rig
4.3 Provision of Manpower for Offshore Services- Dong Xuyen Port Possesses Long-Term Contract with … for supplying Manpower
to fix and repair Machine, Accessory and Protective Personnel Equipment suchas Rescue Boat, Fire Extinguisher.
- Dong Xuyen Port provide High Skill and Abilities Manpower which are trained andcertified to work on Offshore Rig.
Consultant and Technical Support ServicesDong Xuyen Port can also provide consultant and support about Design, MaintenanceWorks and Technical Issues with experience Engineers.
Page 40
4.4 Pictures of Services have been providing:
Inspection and Survey of Vessels for Repair and Maintenance
Page 41
SURVEY OF VESSELS
Survey and Inspection of NDT for Vessels, Liftboat and Ships
Page 42REPAIR LIFTBOAT
Page 43Repair FSO
Page 44
Repair of Compressor Maker: Bitzer Specifications
Model 4EC – 4.2Y – 40SSerial Number 1674903501Speed 1750 rpmLP/HP 19/28 Bar
Page 45
Cleaning Hull by Water Blasting
Page 46
Sand Blasting Underhull
Page 47
Calibration and Inspection of the System
Page 48NDT Underwater for Liftboat H1017
Page 49
Installation of Crane for Liftboat-H1017 of Triyards