Do you know how to use the sawdust dryer correctly

Sawdust Dryer

contact person: Sophia Ren

emai: [email protected]

skype: sophia-ren717

http://www.charcoalbriquettemachine.com

Do You Know How to Use the Sawdust Dryer Correctly




http://goo.gl/wtUqD4

Thewood chips dryers are always used to dry the biomass materials

to the suitable moisture of about 15% to make wood pellets. The

workers must know the operation regulations of the dryers otherwise

you may not achieve the desired outcome because of some minor

details.

1, After the installation is complete, open the fan and check the

rotation direction is normal or not. Check the connective place of the

cylinder leak air or not.

2, Worker should check carefully materials to prevent the metal,stone

and other hard objects enter into the drying chamber to cause the

machine damage and other accidents. And this is beneficial to improve

the drying speed. Then turn on the power switch, let the cylinder idle

for a period

3, Add fuel such as the waste wood and ignite in the stove and let the





hot air into the cylinder or pipeline. When the temperature of the wind

outlet up to 150 centigrade, you can start to feed material.

4, According to the material moisture requirements, select the most

appropriate hot air temperature and air volume of fan and by doing

this you can reduces heat loss and improve the drying efficiency.

5, Choose the high dryer thermal efficiency for drying the wet material

thoroughly, and thus will not affect the materials luster. At the same





time, the material can be dried per time and avoid the increase of the

cost.

6, Strengthen the dryer patrol during the drying to avoid the leakage.

The leakage during the process may cause the outside air drawn into

the cylinder or the hot air carry the material escape the cylinder.

7, For further reduce the exhaust gas dust content, a bag filter or wet

dust collector should be installed.

8, The preheat needs a process and the hot blast stove should have a

preheating process,too. It is prohibited to suddenly ignite fierce fire,

which will cause local overheating and cause damage because the

uneven heat expansion.

9, Meet the sudden power failure, you should immediately shut down

the furnace to stop the feeding . Then every 15minutes let the cylinder

turn a half circle until the cylinder cooling. You shall have the

specialist be responsible for this operating procedures otherwise





violate the rules will result in cylinder bending which will make the

dryer not able to normal use.

10, When dryer start to work, you should let the cylinder move first

and then start the fire. But you when you stop the dryer, you should

stop the stove first and then stop the cylinder.

In a word, there are so many issues you have to mention to operate the

dryer. So it is better for you to have a professional technician to help

you. Further more , it will make your operation more easy if you have

customized you own sawdust dryer from a normal manufacturer. And

Azeus exactly the one. If you have interest, please contact us.

Do you know how to use the sawdust dryer correctly

Documents

Transcript of Do you know how to use the sawdust dryer correctly