DIVER DESIGNTITANIUM JEWELRY

J E W E L RY F ROM D I VE RS FO R D I VE RS

2

It all started with two good friends who shared technical career backgrounds, many years of professional experience, and a passion for diving. Combining their passion and profession felt like the next natural step, and with that, the creation of DiverDesign was born.

The implementation of their ideas using high-quality materials and the latest cutting edge processing methods allows the creation of distinctive forms and opens up exciting possibilities. Professional expertise is channeled into both design and production.

THE COMPANYSince 2009 DiverDesign has been producing Swiss made titanium jewelry. It is DiverDesign’s philosophy to manufacture locally, where the know-how and the technical resources are available, and the team is familiar with the working conditions.

Each piece of jewelry is manufactured individually or in small series, with a special finishing touch by hand.

With each piece of jewelry sold, DiverDesign supports these two organizations with a financial contribution.

DIVER DESIGNTHE STORY

J E W E L RY F ROM D I VE RS FO R D I VE RS

matt / bead-sanded

glossy / polishedcrashed

various coatings

J E W E L RY F ROM D I VE RS FO R D I VE RS

5

Our most common material we use is titanium. Titanium is light, highly robust, absolutely allergy free, comfortable to wear and gives the jewelry pieces a distinctive technical look. Thanks to different working methods, the pieces of jewelry can consist of several parts. The processing and specific coating of the surfaces allows variation of contrasts, distinguishing them with a noble but sporty appearance. Titanium is fully corrosion proof, thus the jewelry can be worn at all times, even when diving in saltwater.

The finishing processes of the raw surfaces result in a matt surface with bead sanding, a rather glossy one with polishing, or a "scratching matt" surface (crashed) by using a diamond sponge.

The design effects are created by different surface coating, such as black, yellow gold or rosé gold.

DIVER DESIGNMATERIALS AND SURFACE COATINGS

6

DIVER DESIGNPENDANTSCURVES – WAVES – DISCS

1- or 2-part versions / in the shape of curves, waves and discs / with various motifs.

1. CURVE One part piece, filled with black ceramic. The one part pendant are all in titanium grey with a ceramic filling of the design. 2. WAVE With the two part pendants, either the design or the pendant can be titanium grey or black. 3. DISC The discs are all two parts as shown in the picture. 4. RETRO PENDANTS These pendants are always one piece only, with a coating of your own choice around the recessed part of the design.

1. 2. 3.

4.

4.

J E W E L RY F ROM D I VE RS FO R D I VE RS

J E W E L RY F ROM D I VE RS FO R D I VE RS

9

The ergonomically bent bracelets are available in two sizes with your choice of design.

The clasp are high quality stainless steel with a silicone band, which gives the bracelets a distinguishing look.

DIVER DESIGNTITANIUM-SILICONE BRACELETS

Ceramic-filled Retro / Retro black on the inside

10

DIVER DESIGNSILICONE COLLIERS AND TITANIUM NECKLACES

The solidity of the high-grade silicone colliers is ensured by a non-visible metal wire welded on both ends to a bayonet fastener.

The Venetian Inca type titanium necklaces are available in different lengths and strengths. The Titanium hook is welded to the binding ring.

1. Titanium necklaces in various colors and strengths2. Three part/five part silicone collier3. Titanium tube necklace4. Rope collier

2.1.

4.

3.

J E W E L RY F ROM D I VE RS FO R D I VE RS

8.

4.

1.

5.

3.2.

6. 7.

J E W E L RY F ROM D I VE RS FO R D I VE RS

13

The rings are available in your own personal choice of design. Please feel free to contact us directly so we can talk to you about your ideas.

1. One part/ recessed ring2. One part/ ceramic filled ring3. Star ring with Zirconias4. Wave ring with Zirconias5. Two part ring6. Three part ring7. Retro ring8. Rotating ring

DIVER DESIGNRINGS

14

DIVER DESIGNFINELINE PENDANTS

The Fineline pendants are 3mm thick. The sizes of the pieces vary, depending on design. They approximately have a height of 16mm and a width of 35mm.

Like most of our jewelry the Fineline pendants are available in different design. They can be worn individually or in an assortment, along with titanium tubes that serve as spacers. You can also add Zirconias in various colors for a fancier look.

1. Assorted set with titanium tubes 2. Fineline pendants with a Zirconia 3. Dotted pieces of pendants are always ONE-OF-A-KIND

2. 3.

1.

3.

J E W E L RY F ROM D I VE RS FO R D I VE RS

J E W E L RY F ROM D I VE RS FO R D I VE RS

17

TAFFLINE pendants are 6mm thick.

Depending on design – height approximately 35mm, and width max. 60mm

MONSTERLINE pendants are 8mm thick.

Depending on design the height and width varies – height approximately 40mm, and width max. 80mm

All pendants are also available with white or colored Zirconias and with various surface coatings.

DIVER DESIGNTAFFLINE + MONSTERLINE

18

DIVER DESIGNEAR STUDS AND HOOP EARRINGS

1. EAR STUDS in various design and surfaces available, thickness is about 2- 3mm.

2. HOOP EARRINGS with recessed or ceramic filled design, in different sizes available.

All EAR STUDS and HOOP EARRINGS are available with embedded white or colored Zirconias.

1.

2.

J E W E L RY F ROM D I VE RS FO R D I VE RS

Your very owndesign?

J E W E L RY F ROM D I VE RS FO R D I VE RS

21

Do you have an idea for an individual piece of jewelry?

Have you been looking for your own personal jewelry for a long time?

We will make your wish come true – Nothing is impossible!

We are willing and able to bring any form into existence!

Please visit our website at DiverDesign.com

DIVER DESIGNYOUR VERY OWN DESIGN

DIVER DESIGNFURTHER CREATIONS

www.diverdesign.com

At TitanDesign you will find extraordinary combinations, new designs and trends.

www.diverdesign.com

info@diverdesign.comwww.diverdesign.com

DIVERDESIGN GmbHGaby & Alberto HafnerLuigi A. Fischer

Moosmatt 21CH-8905 ArniSwitzerland

SWISS MADE