DIRECT METAL PRINTERS - Interempresas · CLEAN & SAFE FOR MORE ... in line with the printer con...

DIRECT METAL PRINTERSMetal Additive Manufacturing with the ProX™ DMP Series

DIRECT METAL PRINTERSMetal Additive Manufacturing with the ProX™ DMP Series

[email protected]@3dz.es

Go Further with Direct Metal Printing

UNLOCK YOUR PRODUCT’S POTENTIAL

With complete design freedom, direct metal 3D printed parts can be stronger, lighter, longer lasting and higher performing than machined or cast assemblies. Manufacture superior performing products, faster and at a lower cost than with traditional fabrication methods.

STREAMLINE SUPPLY CHAINS

With DMP, you have complete control over your production, without relying on specialty components from suppliers. Print entire assemblies on-demand, with fewer components, as needed.

ACCELERATE TIME-TO-MARKET

Conduct R&D, prototyping and production all in the same system. DMP users around the world are designing faster and compressing production times. Transform complex assemblies that take hundreds or even thousands of hours to machine and assemble into a single high value part printed in hours or days.

INCREASE MANUFACTURING AGILITYAdditive manufacturing requires no tooling, reducing overhead and increasing economies of scale. You are able to update designs and change your production mix to meet changing market demands.

CONFORMAL COOLING Direct integration of conformal cooling channels into this blow mold for 30% efficiency increase.

ENHANCED FLUID FLOWFor this turbine inlet guide vane, computed fluid dynamics simulation predicts a 70% reduction in shock intensity.

SIMPLIFIED ASSEMBLIESReplacing a complex assembly, this single burner component contains nine under-cuttings and six internal cavities.

TOPOLOGY OPTIMIZATION Topology optimized aerospace bracket reduces weight by 35%.

LIGHT WEIGHTING Complex and thin-walled structures allow significant weight reduction for these jet engine fuel nozzles.

MASS CUSTOMIZATIONDesigned to perfectly fit the obstructed zone, the zygoma reconstruction corrects the patient’s facial asymmetry.

DMP APPLICATIONS INCLUDE:

ProX™ DMP 100, 200 & 300

Automated production, exceptional quality The ProX DMP 100, 200, and 300 share a common architecture to print exceptionally detailed, high quality parts in an automated and repeatable process that is ideal for R&D and serial part manufacturing at the tightest tolerances in direct metal printing.

TECHNOLOGY LEADERSHIP

3D Systems’ patented roller system spreads the powder and compacts each layer, enabling better heat transfer in the metal powder, steeper unsupported angles, more uniform and thinner layers (as thin as 5 microns).

INDUSTRY’S BEST SURFACE FINISH Little or no machining or polishing to get your final parts.

EXCEPTIONAL MECHANICAL PROPERTIES Roller compaction yields higher density and uniform mechanicals.

UNMATCHED PRECISION Print the finest features with exceptional accuracy.

CLEAN & SAFE FOR MORE ENVIRONMENTS Sealed powder loading and recycling prevents material contamination and increases operator safety.

COMPACT, COMPLETE SYSTEM Requires less floor space and ancillary equipment.

PRINT IN MORE ALLOYS Use standard alloys or run your own with the industry’s most customizable parameters.

ProX™ DMP 300

ProX™ DMP 200

Aerospace airfoilsTire mold sipes

Dental frames

ProX™ DMP 320

High precision, high throughput The ProX DMP 320, developed from the outcome of nearly half-a-million prints, offers fast build turnaround times in demanding 24/7 production environments.

YOUR SCALABLE DMP FACTORY NETWORK

The ProX DMP 320 is easily scalable for high volume part production. A central server manages print jobs, materials, settings and maintenance for 24/7 productivity. Shared resources, including cooling and powder recycling systems, increases efficiency.

PRODUCTION READY Designed for productivity with quick-swap build modules and fast powder recycling.

STRONGER MECHANICAL PROPERTIES The lowest O2 during builds (25 ppm) for exceptionally strong parts of high chemical purity.

LOW OPERATING COSTS Efficient consumables management and shared ancillary equipment lower the total cost of ownership.

EXTENSIVELY TESTED MATERIALS Thousands of hours of parameter optimization ensure predictable and repeatable print quality.

APPLICATIONS VERSATILITY The ProX DMP 320’s robust, streamlined print process means you can print virtually any geometry and avoid trial-and-error steps.

Monolithic complex extrusion with mixing channels

Centralized Process Management

Increased functionality spinal implant

Lightweight aerospace component in Aluminum Alloy (AlSi12)

Optimized racing car oil pump pulley in Stainless Steel 17-4PH

Gas burner with integrated cooling channels in LaserForm™ Ni718

Partials, copings and bridges production in Cobalt Chrome (CoCr)

High corrosion resistant impeller in Stainless Steel 316L

Blow mold with conforming holes in Maraging Steel

Metal Alloys for the ProX DMP SeriesAchieve the best part quality and mechanical properties with 3D Systems’ ready-to-run materials* with extensively developed print parameters.

ProX DMP 100, 200 and 300 printers feature the most flexible build parameter control settings in the industry. These open systems offer you the option to develop parameters and run any material in addition to 3D Systems’ ready-to-run alloys.

The ProX DMP 320 offers exchangeable manufacturing modules that support rapid material change or replenishment, in line with the printer configuration selected.

* Availability varies by printer model (see details on the last page).

Hip implant in Titanium Ti6Al4V Grade 23

3D Systems’ Direct Metal Printing process builds up fully dense, chemically pure complex metal parts from 3D CAD data by melting fine powder with a laser beam, layer by layer, providing industry leading part quality, fine details, precision and repeatability.

ProX Direct Metal production 3D printers are the proven industry standard. You benefit from the experience of our truly global product support team, offering dedicated service and application engineers, to meet your rigorous quality requirements at facilities around the world.

3DZ Franchising (Malta) (+356) 2713 915 2 [email protected] Treviso (Castelfranco Veneto) (+39) 0423 192307 0 [email protected] Brescia (Mazzano) (+39) 030 638519 5 [email protected] Piemonte (Casale Monferrato) (+39) 0142 23109 1 [email protected] Roma (Roma) (+39) 06 3973683 5 [email protected] Toscana (Arezzo) (+39) 057 590854 2 [email protected] Emilia (Reggio Emilia) (+39) 0522 51695 0 [email protected] Albania (Tirana) (+355) 688 08783 0 [email protected] Ungheria (Budapest) (+36) 1 794343 2 [email protected] Romania (Craiova) (+40) 251 41976 4 [email protected] Barcellona (Spagna) (+34) 938 441 720 [email protected] Andalucia (Spagna) (+34) 953 88 80 89 [email protected] Madrid (Spagna) (+34) 912 24 30 84 [email protected] Serbia (Belgrade) (+381) 11 265199 0 [email protected] Dubai (Dubai) (+941) 4251773 4 [email protected]

ProX DMP 100 ProX DMP 200 ProX DMP 300 ProX DMP 320

Build Envelope Capacity (W x D x H)1

3.94 x 3.94 x 3.94 in(100 x 100 x 100 mm)

5.51 x 5.51 x 4.92 in(140 x 140 x 125 mm)

9.84 x 9.84 x 12.99 in(250 x 250 x 330 mm)

10.82 x 10.82 x 16.53 in(275 x 275 x 420 mm)

Metal alloys choice with developed print parameters:

Cobalt-Chrome CoCrStainless Steel 17-4PH

Cobalt-Chrome CoCrStainless Steel 17-4PHMaraging SteelAluminum Alloy AlSi12

Cobalt-Chrome CoCrStainless Steel 17-4PHMaraging SteelAluminum Alloy AlSi12

Titanium CP1 - Grade 12Titanium Ti6Al4V - Grade 5 & Grade 232LaserForm™ Ni7183Stainless 316L3

Layer thickness ________________ Adjustable, min 5 μm - max 100 μm ____________

Preset: 30, 40 and 50 μmAdjustable Preset: 30 and 60 μm

Repeatability ___________________________ x=20 μm, y=20 μm, z=20 μm ___________________________

Min. feature size _______________ x=100 μm, y=100 μm, z=20 μm _______________ 100 μm

Min. wall thickness 150 μm 150 μm 150 μm 150 μm

Typical accuracy ± 0.1-0.2% with ± 50 μm minimum

± 0.1-0.2% with ± 50 μm minimum



Material loading Manual Semiautomatic Automatic Manual

Recycling system Optional external system

Optional external system

Automatic Optional external system

Interchangeable build modules No No No Yes

DMP for in-space communication satellite engines - European Space Agency

Injector: simplified assembly from 5 to 1 part, optimized propellant flow

Combustion chamber: significant weight saving with a

1 Including build plate 2 Set up A 3Set up B Complete specifications available at www.3dsystems.com

LE APPLICAZIONI DMP INCLUDONO:

RAFFREDDAMENTO CONFORMEIntegrazione diretta dei canali di raffreddamento conformi in questo stampo per soffiaggio perun aumento dell’efficienza del 30%.

ASSIEMI SEMPLIFICATISostituzione di un assemblaggio complesso, questo singolo bruciatorecontiene nove sottosquadra e sei cavità interne.

ALLEGGERIMENTOSostituzione di un assemblaggio complesso, questo singolo bruciatorecontiene nove sottosquadra e sei cavità interne.

FLUSSO DEL FLUIDO AUMENTATOPer questa paletta di guida di una turbina, la simulazione fluidodinamica calcolata prevede una riduzione del 70% dell’intensità d’urto.

OTTIMIZZAZIONE DELLA TOPOLOGIALa topologia ottimizzata riduce il peso di questa staffa per l’aerospazia-le del 35%.

PERSONALIZZAZIONE DI MASSAProgettata per adattarsi perfettamentealla zona ostruita, la ricostruzione corregge l’asimmetria facciale del paziente.







3DZ Treviso (Castelfranco Veneto)3DZ Brescia (Mazzano)3DZ Piemonte (Casale Monferrato)

(+39) 0423 192307 0(+39) 030 638519 5(+39) 0142 23109 1

[email protected]@[email protected]

3DZ Roma (Roma) (+39) 06 3973683 5 [email protected] Toscana (Arezzo) (+39) 057 590854 2 [email protected] Emilia (Reggio Emilia) (+39) 0522 51695 0 [email protected] Franchising (Malta) (+356) 2713 915 2 [email protected] Albania (Tirana) (+355) 688 08783 0 [email protected] 3DZ Ungheria (Budapest) (+36) 1 794343 2 [email protected]

3DZ Romania (Craiova) (+40) 251 41976 4 [email protected] Serbia (Belgrade) (+381) 11 265199 0 [email protected]

(+941) 4 251773 4 [email protected]

Designed for 24/7 use, it allows laboratories to boast same-day cycle times, reduced lead times and diminished costs. Delivering new levels of productivity, this printer can produce hundreds of units per cycle and up to 24 quad cases in a single build.

07-1507-15

01-16©2016 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. 3D Systems, the 3D Systems logo, ProJet and VisiJet are registered trademarks of 3D Systems, Inc.

Build Envelope Capacity (X x Y x Z) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm)

Build Materials VisiJet M3 Dentcast - Wax-up castable materialVisiJet M3 PearlStone - Solid stone appearanceVisiJet M3 Stoneplast - Transparent, clear or stone finish

Support Material VisiJet S300 - Eco friendly, easily removable wax

Resolution Ultra High Definition (UHD) Mode: 750 x 750 x 890 DPI; 29 μ layersHigh Definition Smooth (HDX) and High Definition Plaster (HDP) Modes: 375 x 450 x 790 DPI; 32 μ layers

Typical accuracy ±0.001-0.002 inch per inch (0.025-0.05 mm per 25.4 mm) of part dimension

Included Software ProJet Accelerator

Standard Warranty 1 year parts and labor, 5 year print head

Your logo and contact details here

©2016 3D Systems, Inc. Tutti i diritti riservati. Dati soggetti a modifica senza preavviso. 3D Systems, il logo 3D Systems, ProJet e VisiJet sono marchi registrati di 3D Systems, Inc.

Esclusione dalla garanzia: le caratteristiche e performance di questi prodotti possono variare secondo le applicazioni,le condizioni operative, i materiali assieme all’utilizzo finale. 3D Systems non offre garanzie di alcun tipo, né esplicite néimplicite, che includono, ma senza limitarsi a queste, le garanzie di commerciabilità o di idoneità ad un uso particolare.

01-16

DMP per motori di satelliti per telecomunicazioni nello spazio – Agenzia Spaziale Europea

Iniettore: montaggio semplificato da 5 a 1 parte, flusso del propellente ottimizzato

Camera di combustione: riduzione significativa del peso, con una maglia al 12% della densità volumetrica

Ugello di espansione: riduzione degli stress minimizzando la massa sovrastante

Scelta leghe metallichecon i parametri di stampa sviluppati

Spessore dello strato

Ripetibilità

Dim. Dettaglio minima

Spessore min. parete

Accuratezza tipica

Carico del materiale

Sistema di riciclo

Moduli di costruzione Interscambiabili

1Including build plate 2Set up A 3Set up B Complete specifications available at www.3dsystems.com

Via Casignolo, 10 - 20092 Cinisello Balsamo - Milano Telefono 026182401 r.a. - Fax 026122944 www.cmf.it - E -mail: [email protected] marelli s.r.l.

LE APPLICAZIONI DMP INCLUDONO:













3DZ Treviso (Castelfranco Veneto)3DZ Brescia (Mazzano)3DZ Piemonte (Casale Monferrato)3DZ Roma (Roma)3DZ Toscana (Arezzo)3DZ Emilia (Reggio Emilia)3DZ Abruzzo (Montesilvano)3DZ Franchising (Malta)3DZ Albania (Tirana)3DZ Ungheria (Budapest)3DZ Serbia (Belgrade)3DZ Romania (Craiova)

(+39) 0423 192307 0(+39) 030 638519 5(+39) 0142 23109 1(+39) 06 3973683 5(+39) 057 590854 2(+39) 0522 51695 0(+39) 085 468949 0(+356) 2713 915 2(+355) 688 08783 0(+36) 1 794343 2(+381) 11 265199 0(+40) 251 41976 4

[email protected]@[email protected]@[email protected]@[email protected]@[email protected] [email protected]

[email protected]@solfins.com

Prox_DMP.indd 2 16/03/17 10:41

3DZ Treviso (Castelfranco Veneto)3DZ Brescia (Mazzano)3DZ Piemonte (Casale Monferrato)

(+39) 0423 192307 0(+39) 030 638519 5(+39) 0142 23109 1

[email protected]@[email protected]

3DZ Roma (Roma) (+39) 06 3973683 5 [email protected] Toscana (Arezzo) (+39) 057 590854 2 [email protected] Emilia (Reggio Emilia) (+39) 0522 51695 0 [email protected] Franchising (Malta) (+356) 2713 915 2 [email protected] Albania (Tirana) (+355) 688 08783 0 [email protected] 3DZ Ungheria (Budapest) (+36) 1 794343 2 [email protected]

3DZ Romania (Craiova) (+40) 251 41976 4 [email protected] Serbia (Belgrade) (+381) 11 265199 0 [email protected]

(+941) 4 251773 4 [email protected]

3DZ Franchising (Malta) (+356) 2713 915 2 [email protected] Treviso (Castelfranco Veneto) (+39) 0423 192307 0 [email protected] Brescia (Mazzano) (+39) 030 638519 5 [email protected] Piemonte (Casale Monferrato) (+39) 0142 23109 1 [email protected] Roma (Roma) (+39) 06 3973683 5 [email protected] Toscana (Arezzo) (+39) 057 590854 2 [email protected] Emilia (Reggio Emilia) (+39) 0522 51695 0 [email protected] Albania (Tirana) (+355) 688 08783 0 [email protected] Hungría (Budapest) (+36) 1 794343 2 [email protected] Rumanía (Craiova) (+40) 251 41976 4 [email protected] Barcelona (España) (+34) 938 441 720 [email protected] Andalucía (España) (+34) 953 88 80 89 [email protected] Madrid (España) (+34) 912 24 30 84 [email protected] 3DZ Serbia (Belgrade) (+381) 11 265199 0 [email protected] Dubai (Dubai) (+941) 4251773 4 [email protected]

DIRECT METAL PRINTERS - Interempresas · CLEAN & SAFE FOR MORE ... in line with the printer con...

Documents

Transcript of DIRECT METAL PRINTERS - Interempresas · CLEAN & SAFE FOR MORE ... in line with the printer con...