Die Grinder
1
DIE GRINDERS High durability and widely used because it Easy operation due to small and light weig grip structure Covered with an anti-vibration and anti-col DG-38 DGL-3 DG-38 DGS-3 • Light d • Availa specia • Protec • Availab specia • Due to • Less th • 20% n • Suitabl • Easy o • Availab Bushin MODEL CAPACITY (COLLET SIZE) MAX FREE SPEED LENGTH in mm rpm in mm DG-38L - 6 25,000 6.45 164 DG-38S - 6 25,000 6.45 164 DGL-38L - 6 25,000 12.99 330 DGL-38S - 6 25,000 12.99 330 DG-38LS - 6 25,000 6.45 164 DGL-38LS - 6 25,000 12.99 330 DGS-38L - 6 22,000 6.45 164 DGS-38S - 6 22,000 6.45 164 09 s easy disassembling and reassembling ght and low operation fatigue due to the comfortable ldness 8L / DG-38S 38L / DGL-38S 8LS / DGL-38LS 38L / DGS-38S duty operation such as a polishing, burr removing etc. ble 3.0 mm shaft assembled with various carbonated tools by a al Bushing tion from hazard by safety lever ble 3.0 mm shaft assembled with various carbonated tools by a l Bushing a silencer installed, noise controlled han 90dB oise-reduced le for inside-working operation to the corner or deep place by its extended spindle ble 3.0 mm shaft assembled with various carbonated tools by a special ng WEIGHT (WITHOUT WHEEL) THREAD AIR INLET AVERAGE AIR CONSUMPTION RECOMMENDED AIR PRESSURE lb kg in ft 3 /min m 3 /min PSI kg/cm 2 1.32 0.57 PT1/4 10.7 0.3 85 6 1.32 0.57 PTI1/4 10.7 0.3 85 6 2.09 0.92 PT1/4 10.7 0.3 85 6 2.09 0.92 PT1/4 10.7 0.3 85 6 1.32 0.57 PT1/4 10.7 0.3 85 6 2.29 0.92 PT1/4 10.7 0.3 85 6 1.32 0.57 PT1/4 10.7 0.3 85 6 1.32 0.57 PT1/4 10.7 0.3 85 6
description
Die Grinder
Transcript of Die Grinder
-
DIE GRINDERS
High durability and widely used because it Easy operation due to small and light weig
grip structure Covered with an anti-vibration and anti-col
DG-38
DGL-3
DG-38
DGS-3
Light d Availaspecia
Protec Availabspecia
Due to Less th 20% n Suitabl
Easy o AvailabBushin
MODEL CAPACITY
(COLLET SIZE) MAX FREE
SPEED LENGTH
in mm rpm in mm
DG-38L - 6 25,000 6.45 164
DG-38S - 6 25,000 6.45 164
DGL-38L - 6 25,000 12.99 330
DGL-38S - 6 25,000 12.99 330
DG-38LS - 6 25,000 6.45 164
DGL-38LS - 6 25,000 12.99 330
DGS-38L - 6 22,000 6.45 164
DGS-38S - 6 22,000 6.45 164
YANGSAN MACHINERY CO.,LTD09
s easy disassembling and reassemblingght and low operation fatigue due to the comfortable
ldness
8L / DG-38S
38L / DGL-38S
8LS / DGL-38LS
38L / DGS-38S
duty operation such as a polishing, burr removing etc.ble 3.0 mm shaft assembled with various carbonated tools by a
al Bushing
tion from hazard by safety leverble 3.0 mm shaft assembled with various carbonated tools by a l Bushing
a silencer installed, noise controlledhan 90dBoise-reducedle for inside-working
operation to the corner or deep place by its extended spindleble 3.0 mm shaft assembled with various carbonated tools by a special ng
WEIGHT(WITHOUT WHEEL)
THREAD AIR INLET
AVERAGE AIRCONSUMPTION
RECOMMENDEDAIR PRESSURE
lb kg in ft3/min m3 /min PSI kg/cm2
1.32 0.57 PT1/4 10.7 0.3 85 6
1.32 0.57 PTI1/4 10.7 0.3 85 6
2.09 0.92 PT1/4 10.7 0.3 85 6
2.09 0.92 PT1/4 10.7 0.3 85 6
1.32 0.57 PT1/4 10.7 0.3 85 6
2.29 0.92 PT1/4 10.7 0.3 85 6
1.32 0.57 PT1/4 10.7 0.3 85 6
1.32 0.57 PT1/4 10.7 0.3 85 6
