Dial Indicators for Car and Landing Fixtures...C. Dial Indicators for Car and Landing Fixtures...

Exclusive Lift Indicators

Chap

ter C

Dial Indicators for Car and Landing Fixtures

C.2

Same of our references:

State chancellery in Magdeburg Mandarin Oriental Munich Banca d'Italia Milano

UniCredit Bank Vienna Sprinkenhof Hamburg Hotel Bayrischer Hof Munich

Bremen Cotton Exchange Hotel Kempinski Vilnius University Hospital Heidelberg

O! ce High-rise row Rezydencja od ul. Kopernika Hotel Adlon Berlin

Berlin Lennéstreet Warsaw (Electronics + Mechanics)

Stylish building design requires the will to innovate with sophisticated technically and aesthetically expressive elements without getting

distracted by short-dated trends. The synthesis of valuable materials and premium processor and drive technology characterizes the entire

collection. Each indicator is handmade as per the customers preference.

In our chapter Dial Indicators for Car and Landing Fixtures you can # nd a variety of products of elegant design and fascinating beauty to highlight

the style of your building.



C.3

pages C.4 and C.64

pages C.5 – C.15

pages C.16 – C.29

pages C.30 – C.39

pages C.40 – C.45


Ø 160 mm half round

with brass, gold-coated and TiN-gold stainless steel frame


Ø 160 mm half round

with stainless steel frame


Ø 130 mm round


General Information

Contents

pages C.46 – C.50

pages C.51 – C.57

pages C.58 – C.63

pages C.64 – C.65


Ø 160 mm round



Ø 160 mm round


Choice of fonts 11 mm and 15 mm high

and pointers, loose


Ø 130 mm round


Technical Data and Request Form

C.4


General Information

Control and pointer drive

The core is a microprocessor-controlled high precision gear motor which can be controlled without problems like an usual digital display with

binary or gray code. Also, parallel operation with conventional digital displays at other stops can easily be performed. In most cases, existing

digital displays can be replaced by a Dial Indicator for Car and landing Fixtures without major changes. The elegant, slightly sweeping, pointer

motion starts when the signal for switch over to the next stop is received. The stop characters always have the same angular dimensions regard-

less of the actual distances between stops.

Surface ! nishing of brass

Many indicators of the collection have parts of polished brass.

Alternatively to untreated brass surfaces, the following galvanic surface treatments are available:

Brass gold

The coating consists of 24 carat hard gold plating with addition of Indium. The material hardness is approximately 230 HV (Vickers hardness).

The appearanco of the surface is similar to brass. By # nishing the brass shine is permanently conserved.

Fine gold

The surface consists of 24 carat hard gold plating with addition of cobalt. The material hardness is 130 HV. The surface gloss of # ne gold is

slightly more yellowish-reddish than brass.

Stainless steel shine

The coating consists of chromium with metal colour additions and the colour is similar to polished stainless steel. The brilliance of the cut

edges, however, is visually much stronger than the brilliance of stainless steel. Therefore, SCHAEFER uses this coating for stop characters and

pointers among others, in combination with massive stainless steel frames.

Surface ! nishing of stainless steel: TiN-coating with brass gold colour and Black Magic coating

In the indicator series we o3 er alternatively to the brass frames stainless steel frames with titanium nitride (TiN) coating with the colour of

brass gold. The advantage is the much higher surface hardness of approximately 1500 HV.

Especially for indicators, which are placed within reach of hands, we recommend a TiN-coated stainless steel frame in combination with brass

gold stop characters and pointers. Other variants are stainless steel frames and faces with Black Magic coating. The surface is black polished

and depending on the light slightly bluish-violet. The polished design of stainless steel is retained after # nishing. Black Magic coated parts

have a similar high hardness as TiN. The colours of frames and faces can be slightly di3 erent due to the production process.

C.5



Gol160hr-1 and -2

• massive stainless steel frame, Ø 160 mm polished

surface titanium nitride (TiN) brass gold

• alternatively, massive brass frame, polished

surface untreated, 24 K brass gold or 24 K # ne gold

• tempered safety glass pane 3 mm, interference non-re4 ecting

• stop characters brass 1 mm, polished

untreated, 24 K brass gold, 24 K # ne gold coated

font: Swiss 721BT (# g.), Arial or selectable on pages C.58 – C.61

height of the characters: 3–8 characters 15 mm or 3–12 characters 11 mm

Gol160hr-1

• stainless steel face Pikee gold coated with horizontal grinding

• Cr-steel cypher arc, # ne structure red coated

• pointer no. 16/51-Ms-msgol or selectable from collection page C.62

Gol160hr-2

• stainless steel face Pikee gold coated with vertical grinding

• Cr-steel cypher arc, # ne structure black coated


Gol160hr-2 has the same design as the

big Dial Indicator Gol432hr-2

page C.4 General Information

pages C.64 – C.65 Technical Data and

Request Form

C.6


Studio photo

C.7



Gol160hr-3 and -4




surface untreated, 24 K brass gold or 24 K # ne gold (# g.)


• face stainless steel, gold coated,

design Mirror Spots

Gol160hr-3

• stainless steel cypher arc, pearl blasted

surface TiN brass gold, 24 K brass gold or 24 K # ne gold

• stop characters brass, 1 mm, polished


font: Swiss 721BT, Arial or selectable on pages C.58 – C.61



Gol160hr-4


• stop characters aluminum-casting 2,5 mm

surface colour: brass matt or gold matt

font: Futura Book or selectable on pages C.58 – C.61

height of the characters: 3–8 characters 15 mm,

other fonts 3–12 characters 11 mm






Request Form

C.8


Dial Indicator for Car and Landing Fixtures

Gol160hr-5






• face stainless steel, gold coated,

design Mirror Spots



untreated, 24 K brass gold or 24 K # ne gold coated

font: Arial (# g.), Swiss 721BT or selectable on pages C.58 – C.61



C.9



Gol160hr-6 and -7


• face stainless steel polished, Black Magic coated

• stop characters brass, 1 mm, polished





Gol160hr-6

• massive stainless steel frame, Ø 160 mm polished, Black Magic coated

Gol160hr-7







Request Form

C.10


Studio photo

C.11



Gol160hr-8• massive stainless steel frame, Ø 160 mm polished, surface titanium nitride (TiN) brass gold (# g. left)


surface untreated, 24 K brass gold or 24 K # ne gold (# g. below)


• unique face (in all deliveries slightly di3 erent)

surface copper alloy, artist motif Stria







• pointer no. 6/51-Ms-msgol (# g. left)

pointer no. 8/51-Ms-gol (# g. below) or selectable from collection page C.62





Request Form

C.12



Gol160hr-9






• face bronze, design Small Flowers




font: Arial (# g. above), Swiss 721BT, or selectable on pages C.58 – C.61







Request Form

C.13



Gol160hr-10






• face bronze, design Water Jet


surface TiN brass gold, 24 K brass gold or 24 K # ne gold (# g.)

• stop characters black 1 mm, matt

font: Swiss 721BT (# g. below), Arial or selectable on pages C.58 – C.61


• pointer no. 5/51-sw or selectable from collection page C.62

Gol160hr-10 has the same face as the




Request Form

C.14


Gol160hr-12 and -12B

• massive brass frame, polished


• alternatively, stainless steel frame, Ø 160 mm polished



• face stainless steel polished, design Black Magic

• stainless steel cypher arc, pearl blasted, surface TiN brass gold,

24 K brass gold or 24 K # ne gold (# g. above)

• intermediate arc brass 1 mm, polished

24 K brass gold or 24 K # ne gold coated

optional set with brilliants corresponding

to the number of stops (variant -12B)




height of the characters: 3–8 characters 15 mm

or 3–12 characters 11 mm

• pointer no. 16/51-Ms-gol-B, set with a brilliant

or selectable from collection page C.62


Gol160hr-11 and -12

Gol160hr-11



• alternatively, stainless steel frame, Ø 160 mm polished





• intermediate arc brass, 1 mm polished,






or 3–12 characters 11 mm

• pointer no. 6/51-Ms-gol or selectable from collection page C.62

C.15



Gol160hr-13






• face stainless steel polished, elevated design structure Austenit


• stop characters and intermediate arc brass 1 mm, polished







Request Form

C.16


Studio photo

C.17



Es160hr-1 and -2



• face stainless steel H8, mirror polished

Es160hr-1



surface stainless steel shine

font: Swiss 721BT (# g. above), Arial or selectable on pages C.58 – C.61


• pointer no. 9/51-Ms-esg or selectable from collection page C.62

Es160hr-2

• Cr-steel cypher arc, # ne structure white coated



font: Arial (# g.below), Swiss 721BT or selectable on pages C.58 – C.61



Es160hr-1 has the same design as the

big Dial Indicator Es432hr-2



Request Form

C.18



Es160hr-3 and -4



• face stainless steel design Mirror Drops

Es160hr-3


• stop characters 1 mm, polished


font: Arial (# g. above), Swiss 721BT or selectable on pages C.58 – C.61



Es160hr-4











Request Form

C.19


Studio photo

C.20


Studio photo

C.21



Es160hr-5



• face stainless steel design Mirror Drops


• stop characters aluminum casting 2,5 mm thick

colour of surface stainless steel matt

font: WALLRAFF-Roman (# g. above)


or brass 1 mm, polished


font: Arial (# g. left), Swiss 721BT or selectable on pages C.58 – C.61


• pointer no. 10/51-Ms-esg (# g. above)

pointer no. 6/51-Ms-esg (# g. left)






Request Form

C.22



Es160hr-6 and -7



• face stainless steel # ne ground

Es160hr-6






• pointer no. 9/51-sw or selectable from collection page C.62

Es160hr-7











Request Form

C.23



Es160hr-8 and -9



• face stainless steel design Frost Pattern

Es160hr-8







Es160hr-9




font: Arial (# g. below), Swiss 721BT or selectable on pages C.58 – C.61



Es160hr-8 and -9 have the same design as the

big Dial Indicators Es432hr-5 and -3



Request Form

C.24


Studio photo

C.25



Es160hr-10 and -11



• face stainless steel design Linen

Es160hr-10







Es160hr-11







Es160hr-10 and -11 have the same design as the

big Dial Indicators Es432hr-7 and -6



Request Form

C.26



Es160hr-12





• stop characters and intermediate arc brass 1 mm, polished







Request Form

C.27


Studio photo

C.28


Studio photo

C.29



Es160hr-13



• face stainless steel polished, elevated design structure Austenit


• intermediate arc and stop characters brass 1 mm, polished







Request Form

C.30



Gol130r-1 and -2







surface gold alloy, artist motif Golden Yellow Leaves

Gol130r-1

• stainless steel cypher ring, pearl blasted

surface TiN-brass gold, 24 K brass gold or 24 K # ne gold






Gol130r-2

• Cr-steel cypher ring, # ne structure red coated








Request Form

C.31


Studio photo

C.32

Studio photo


C.33


Gol130r-3


surface titanium nitride (TiN) brass gold (# g. left page)

• alternatively, massive brass frame polished, surface

untreated, 24 K brass gold or 24 K # ne gold (# g. above)


• face brass, polished






or black, 1 mm matt (# g. left page)



• pointer no. 11/38-Ms-msgol

pointer no. 11/38-sw (black) or selectable from collection page C.62



Request Form

C.34



Gol130r-4







• Cr-steel cypher ring, # ne structure black coated

• stop characters and intermediate ring brass 1 mm, polished







Request Form

C.35


Studio photo

C.36



Gol130r-5

• massive brass frame, Ø 130 mm polished

surface 24 K brass gold or 24 K # ne gold

• alternatively, massive stainless steel frame, Ø 130 mm polished




surface Black Magic


surface (TiN) brass gold, 24 K brass gold or 24 K # ne gold





• pointer no. 10/38-Ms-gol-B set with a brilliant




Request Form

C.37



Gol130r-6 and -7








Gol130hr-6

• massive stainless steel frame, Ø 130 mm polished, Black Magic coated

Gol130hr-7





C.38


Studio photo

C.39



Gol130r-8 and Es130r-1


• face brass, polished








Gol130r-8





Es130r-1 (# g. left page in brass # xture)


Stainless Steel and Gold



Request Form

C.40



Es130r-2 and -3




surface tin, artist motif Silver Leaves

Gol130r-2







Gol130r-3









Request Form

C.41



Es130r-4




surface tin, artist motif Silver Leaves

• cypher ring stainless steel, pearl blasted

• intermediate ring and stop characters brass 1 mm, polished


or characters black



• pointer no. 7/38-Ms-esg

pointer no. 10/38-sw (black) or selectable from collection page C.62

C.42


Studio photo

C.43



Es130r-5• massive stainless steel frame, Ø 130 mm polished



• Cr-steel cypher ring, # ne structure white coated








Request Form

C.44









• pointer no. 9/38-Ms-esg (# g. above)

pointer no. 8/38-Ms-esg (# g. right page)



Es130r-6



Request Form

C.45

Studio photo

C.46


Studio photo

C.47


• massive stainless steel frame, Ø 160 mm polished,












Gol160r-1



Request Form

C.48




• alternatively, massive stainless steel frame, Ø 160 mm polished








ring, optionally set with brilliants corresponding

to the number of stops (variant -2B)



• pointer no. 11/51-Ms-gol-B set with a brilliant



Gol160r-2



Request Form

C.49


Studio photo

C.50


• massive brass frame, Ø 160 mm polished

surface 24 K brass gold or 24 K # ne gold (# g.)

• alternatively, massive stainless steel frame, polished,




surface copper alloy, artist motif Red Leaves







pointer no. 16/51-Ms-gol-B set with a brilliant



Gol160r-3



Request Form

C.51



Es160r-1 and -2




Es160r-1







Es160r-2









Request Form

C.52



Es160r-3 and -4

Es160r-3




• Cr-steel cypher ring, # ne structure white coated






Es160r-4











Request Form

C.53


Es160r-5




• face brass, blue glossy coated






Es160r-6



• face brass, green glossy coated







Es160r-5 and -6

C.54

Studio photo


C.55











Es160r-7



Request Form

C.56












Es160r-8



Request Form

C.57


Studio photo

C.58


Stop characters 160hr, 130r, 160r

Number of characters and height:

Half-round Indicators Ad160hr:

3–8 characters 15 mm


Round Indicators Ad130:





Font: Swiss 721BT (similar to Helvetica)

Font: Times New Roman with Arabic numerals










optionally with Roman numerals

C.59


Ms-esg

brass polished 1 mm

stainless steel shine

Ms

brass polished 1 mm

untreated

Ms-gol

brass polished 1 mm

24 K # ne gold coated

Material and surface colours of the fonts Swiss 721BT, Times New Roman and Arial

sw

brass 1 mm

# ne structure black coated

Ms-msgol

brass polished 1 mm

24 K brass gold coated

Information about indicators with TiN brass gold stainless steel frames

We recommend the combination of TiN brass gold stainless steel frames with brass characters and pointers with brass gold coating (Ms-msgol).











Font: Arial

C.60



Al-esm

aluminum-casting 2,5 mm

stainless steel matt

Al-ms


brass matt

Al-gol


gold matt

Mg-gol

brass-casting 2,5 mm

gold 240 # ne ground

Material and surface colours





not recommended (characters too high)



General Information about Futura Book

Our font Futura Book is slightly modi# ed

from the original font so that the individually

placed characters on the faces are more

homogeneous.

Font: Futura Book

C.61



Al-esm


stainless steel matt

Al-ms


brass matt

Al-gol


gold matt

Mg-ms


brass 240 # ne ground


Mg-gol


gold 240 # ne ground

Mg-darc


dark 240 # ne ground





not recommended (characters too high)



Font: WALLRAFF-Roman

C.62


1/38

1/51

2/38

2/51

4/38

4/51

5/38

5/51

8/38

8/51

9/38

9/51

10/38

10/51

11/38

11/51

6/38

6/51

7/38

7/51

16/38

16/51

17/38

17/51

Pointers 160hr, 130r, 160r

Characteristics

• Pointer length pivot - point : Half-round Indicators Ad160hr: 51 mm

Round Indicators Ad130r: 38 mm

Round Indicators Ad160r: 51 mm

B = pointer with brilliants

Pointers, set with brilliants see pages C.14, C.36 and C.48

C.63


Pointers 160hr, 130r, 160r


Ms-esg

brass polished 1 mm

stainless steel shine

Ms

brass polished 1 mm

untreated

Ms-msgol

brass polished 1 mm

brass gold coated

Ms-gol

brass polished 1 mm

# ne gold coated

sw

brass 1 mm

# ne structure black coated

Key to order pointers 1/51 - Ms - esg - B

pointer No.

and length

material and

surface

set with

B=brilliant

Information about indicators with TiN gold brass stainless steel frames

We recommend the combination of TiN brass gold stainless steel frames with brass characters and pointers with brass gold coating (Ms-msgol).

C.64


Technical Data

158

+/-0

,1

R79

158 +/-0,1

15

,8

128

+/-0,

1

Required cutout in the car or landing # xture:

for Dial Indicator series 160hr for Dial Indicator series 160r for Dial Indicator series 130r

R57

,2

72

37,5160

16

,8

48,5 / 49,7

72

37,5

48,5 / 49,7

R57

,2

160

72

37,5

R57

,2

130

48,5 / 49,7

Construction dimensions 160hr

Installation depth 51 mm:

Gol160hr-1 and -2

Es160hr-1and -2

Es160hr-6 up to -11

all other 50 mm

with super silent drive for

cabins: 58 mm

Precision drive-1 for Dial Indicators

Max. pointer radius: 270°

Max. pointer length: 51 mm pivot - pointer point

Max. stop number: 15

Supply voltage: 12 V DC (10 V – 16 V)

24 V DC (20 V – 27 V)

Rating current: 130 mA, idling up to 90 mA

Signal-input current: 12 mA/input

Control: common anode or cathode

Code: binary or gray

Start bit: 0000 or 0001

Terminal marking: A B C D - +

Noise level of the precision drive: approx. 36 dB(A) (quiet as a whisper)

alternatively with additional acoustic insulation as super silent drive

e. g. for cabins approx. 32 dB(A)

Construction dimensions

160r

Installation depth 51 mm:

Es160r-1 up to -4

all other 50 mm

Construction dimensions 130r

Installation depth 50 mm

super silent drive for

cabins: 58 mm

with super silent drive for

cabins: 58 mm

with super silent drive 55/56 mm

with super silent drive 55/56 mm

with super silent drive 55 mm

Signal inputs

Gray-Code

D C B A

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

= signal on

Signal inputs

Binary code

D C B A

C.65


Request Form Master Copy Form Z1C

_________________________

Lift Number

_________________________

Inquiry/project

___________________________

Scheduled delivery date

Important information for presetting the indicators:

Date Signature

_________________________

Indicator variant_______

Quantity

Pointer variant

(see pages C.62 – C.63):

Font


Just # ll in forGol indicators (see page C.4):

frame stainless steelTiN brass gold coated

frame brassuntreated

frame brass24 K brass gold coated

frame brass24 K # ne gold coated

Example No. 6/51-Ms-msgol

Times New Roman

Arabic numerals (1 2 3)

Times New Roman

Roman numeral (I II III)

Stop characters: ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____

Example: -2 - 1 0 1 2 3 4

Swiss 721BT

Arial

First stop begins with:

0001 (standard)

0000

graybinary

1 out of n

Code:

20 V – 27 V DC

10 V – 16 V DC

Supply voltage:

common cathode

common anode

Control:

Nominal speed vn: _____________ m/s Lifting height: _____________ m

Stop characters height:

11 mm for indicator type:160hr up to max. 12 charac.

130r up to max. 12 charac.


15 mm for indicator type:160hr up to max. 8 charac.

130r not recommended


Material and surface colour


Example Ms-msgol

intermediate ring with brilliantsaccording to the number of stops

therefrom ______ pieces

as Super Silent Drive with

mounting depth 58 mm

instead of 51 mm

Futura Book

WALLRAFF-Roman

To: SCHAEFER GmbH Phone +49 7571 722-0

Winterlinger Str. 4 Fax +49 7571 722-99

72488 Sigmaringen [email protected]

Germany www.ws-schaefer.de

From: Company Phone

Contact person E-mail

Street

Postal code/City

C.66

Dial Indicators for Car and Landing Operating Panels

Notes

General Information and imprint

Figures, engineering drawings and dimensions in our catalogue are accurately made, but only approximate. Errors, improvements and technically reasonable

construction changes are reserved. SCHAEFER GmbH assumes no liability for incidental or consequential damages in connection with the use of the catalogue.

The portal and fixture designs in this catalogue can be used in connection with our lift indicators without permission. Property rights to the buttons must be

observed. Otherwise all rights reserved. The catalogue, individual catalogue images (pictures) and extracts from the catalogue may be used without permission

only for the distribution of the shown lift indicators. SCHAEFER GmbH is partner of WALLRAFF Lifttechnik + Design e. K.

SCHAEFER GmbH

Winterlinger Str. 4 | 72488 Sigmaringen | GermanyPhone +49 7571 722-0 | Fax +49 7571 722-99

[email protected] | www.ws-schaefer.de

015395 | SCHAEFER GmbH | 08/2012 | Subject to technical modifications and supplementations.

Dial Indicators for Car and Landing Fixtures...C. Dial Indicators for Car and Landing Fixtures...

Documents

Transcript of Dial Indicators for Car and Landing Fixtures...C. Dial Indicators for Car and Landing Fixtures...