DESIGN AND TECHNOLOGY REVISION BOOKLET 6 · 2018-04-22 · This examination booklet can be...
5
Transcript of DESIGN AND TECHNOLOGY REVISION BOOKLET 6 · 2018-04-22 · This examination booklet can be...
DESIGN AND TECHNOLOGYREVISION BOOKLET
SUITABLE REVISION MATERIAL FOR:
PRODUCT DESIGNRESISTANT MATERIALS
GRAPHIC PRODUCTSDESIGN AND TECHNOLOGY
6
NAME: FORM/GROUP
PRODUCTION SYSTEMS - BOOKLET 1
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
This examination booklet can be duplicated and printed out if required but not edited in any way.The links to cannot be removed.www.technologystudent.com
The PDF file can be stored on school / college systems and distributed electronically (NO EDITING ALLOWED)
PLEASE RESPECT THE COPYRIGHT - report infringers to [email protected] be distributed at courses or by course instructors / consultants
WHAT IS A PRODUCTION LINE?WHAT IS AN ASSEMBLY LINE?
INTRODUCTION TO SCALES OF PRODUCTIONCLIENTS, CUSTOMERS, SERVICE AND MANUFACTURING
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
LINK TO HELP AND INFORMATION
1a. In simple terms, describe a production / assembly line. You may wish to mention the following key words / phrases: 4 marks
COMPUTER CONTROL - TASKS - PEOPLE / WORKERS - ASSEMBLY
PRODUCTION LINES
1b. Industry has found that production / assembly lines have certain advantages. List the advantages below. In your answer, mention the following key words / phrases. 3 marks
SPEED EFFICIENCY COST EFFECTIVENESS
http://www.technologystudent.com/prddes1/prodline1.html
1c. A typical bicycle (shown opposite), is to be assembled on a production/assembly line. Using the incomplete diagram of the production line drawn below - complete the diagram by adding a drawing of each component / part of the bicycle, in what you consider to be the correct place, on the assembly line.
The frame moves along the assembly / production line and the component parts are added, until the bicycle is complete. 7 marks
THE NUMBER OF COMPONENTS / PARTS ARE LISTED BELOW
CONVEYOR BELT
WORKSTATION 1
WORKSTATION 2
WORKSTATION 3
WORKSTATION 4
WORKSTATION 5 WORKSTATION 7
WORKSTATION 6
GEAR STICKHANDLE BARS
FRONT WHEEL MUD GUARDSSEAT REAR WHEELSPROCKETS
AS
SE
MB
LY
C
OM
PL
ET
E2 3 5 5 6 7
1d. Describe / explain one disadvantage of production / assembly lines. 1 mark
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
LINK TO HELP AND INFORMATION
PRODUCTION LINES
http://www.technologystudent.com/prddes1/prodline1.html
NAME: SCALES OF PRODUCTION DATE:
CONTINUOUSPRODUCTION
BATCHPRODUCTION
SINGLE ITEM/ONE OFF
SCALES OF PRODUCTION
2a. Write key phrases for each of the scales of production listed below. Arrange the words / phrases around the scale of production.
2c. List five products manufactured through each of the scales of production.
1.
2.
3.
1.
2.
3.
1.
2.
3.
PRODUCTS PRODUCTS PRODUCTS
4.
5.
4.
5.
4.
5.
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
LINK TO HELP AND INFORMATION http://www.technologystudent.com/joints/scalep1.htm
www.technologystudent.com © 2017https://www.facebook.com/groups/254963448192823/WORLD ASSOCIATION OF TECHNOLOGY TEACHERS V.Ryan © 2017
LINK TO HELP AND INFORMATION http://www.technologystudent.com/prddes1/custom1.html
THE CLIENT / CUSTOMER
3a. What is the difference between a CUSTOMER and a CLIENT ? 4 marks
3b. What is the difference between a SERVICE INDUSTRY and MANUFACTURING INDUSTRY ? Give and example of a service and manufacturing industry to help explain your answer. 4 marks
LINK TO HELP AND INFORMATION SEARCH THE INTERNET FOR THE ANSWER
3c. Name one well known company that is a provider of services AND name one well known company that manufactures. 2 marks
SERVICE COMPANY MANUFACTURING COMPANY
LINK TO HELP AND INFORMATION SEARCH THE INTERNET FOR THE ANSWER
