March 14 2016

Books (httpprajwaldesaicombooks) Forums (httpprajwaldesaicomcommunity) About Me (httpprajwaldesaicomabout-me)

Privacy Policy (httpprajwaldesaicomprivacy-policy) Videos (httpprajwaldesaicomvideos) Contact Me (httpprajwaldesaicomcontact-me)

(httpstwittercomPrajwalDesai) (httpwwwyoutubecomuserPrajwalDesai) (httpsplusgooglecom112159121845941209559posts)

(httpwwwpinterestcomprajwaldesai) (httpprajwaldesaicomfeed)

(httpprajwaldesaicom)

Deploying SCCM 2012 Part 14 ndashEnabling PXE Adding OS Installer

Creating Task SequencePosted by Prajwal Desai (httpprajwaldesaicomauthorprajwal) Date December 23 2012 in SCCM (httpprajwaldesaicomsccm)

12 Comments (httpprajwaldesaicomdeploying-sccm-2012-part-14-build-and-capture-windows-7-64-bitdisqus_thread) 57459 Views

Home SCCM

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

Pinterest Love This 0 Print 3 Email 0

Gmail ﴾httpsmailgooglecommailu0

view=cmampfs=1ampsu=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampbody=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bitampui=2amptf=1﴿

Reddit 0 ﴾httpredditcomsubmiturl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Deploying SCCM 2012 Part 14 ndash Enabling PXE Adding OS Installer Creating Task Sequence ndash In this post we will see the initial steps to build and capturewindows 7 x64 using SCCM 2012We will first enable the PXE support for the clients add an windows 7 64 bit OS installer and lastly create a task sequence

Ways to deploy operating systems ndash There are several methods that you can use to deploy operating systems to Configuration Manager client computers

16SHARES

(HTTPPRAJWALDESAICOMHOME) EXCHANGE (HTTPPRAJWALDESAICOMEXCHANGE) LYNC (HTTPPRAJWALDESAICOMLYNC)

SYSTEM CENTER (HTTPPRAJWALDESAICOMSYSTEM-CENTER) INTUNE (HTTPPRAJWALDESAICOMINTUNE)

WINDOWS OS (HTTPPRAJWALDESAICOMWINDOWS-OS) SECURITY (HTTPPRAJWALDESAICOMSECURITY) NEWS (HTTPPRAJWALDESAICOMNEWS)

FORUMS (HTTPPRAJWALDESAICOMCOMMUNITY)

English

PXE initiated deployments PXE-initiated deployments let client computers request a deployment over the network The operating system image and aWindows PE boot image are sent to a distribution point that is configured to accept PXE boot requests

Multicast deployments In this method the operating system image is sent to a distribution point which in turn simultaneously deploys the image when clientcomputers request the deployment

Bootable Media Deployments Bootable media deployments let you deploy the operating system when the destination computer starts When the destinationcomputer starts it retrieves the task sequence the operating system image and any other required content from the network Because that content is not onthe media you can update the content without having to recreate the media

Stand-alone Media Deployments Stand-alone media deployments let you deploy operating systems in environments where it is not practical to copy anoperating system image or other large packages over the network and in environments without network connectivity or low bandwidth network connectivity

Prestaged Media deployments Prestaged media deployments let you deploy an operating system to a computer that is not fully provisioned The prestagedmedia is a Windows Imaging Format (WIM) file that can be installed on a bare-metal computer by the manufacturer or at an enterprise staging center that isnot connected to the Configuration Manager environment

For more information on Operating System Deployment in Configuration Manager please go through this link - httptechnetmicrosoftcomen-uslibrarygg682108aspx (httptechnetmicrosoftcomen-uslibrarygg682108aspx)

We will first enable the PXE support for the clients we will be performing the below steps with the user account ldquosccmadminrdquo

Launch the configuration manager 2012 console click on Administration Servers and Site system roles right click Distribution point and click properties Clickon PXE tab check the box ldquoEnable PXE support for clientsldquo There is warning box that appears click on Yes This will enable the PXE support for clients

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-1jpg)

After you do the above step check the box for ldquoAllow this distribution point to respond to incoming PXE requestsldquo ldquoEnable unknown computer supportldquo ldquoa password when computers use PXEldquo Provide a password for User device affinity choose ldquoAllow user device affinity with automatic approvalldquo Click on Applyand OK

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-2jpg)

Now after enabling the PXE we will add Operating system installer In the CM console click on Software Library under Operating Systems right click OperatingSystem Installers and select Add Operating System Installer We will be adding Windows 7 Professional 64 bit OS The Operating system files have been copiedon to the other drive we will provide the path in the next step

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-3jpg)

Provide the folder path where you have copied the Operating system in our case its sccmprajwallocalDeploymentOSWindows7 Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-4jpg)

Lets name the OS image as Windows 7 Professional Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-5jpg)

Click Next and Click Close We have successfully added the Operating System Installer

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-6jpg)

We will now distribute the OS to the distribution point To do so right click on the Windows 7 Professional click Distribute Content

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-7jpg)

Click on Add Select Distribution Point in the Add Distribution Points box select the Distribution Point and click OK Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-8jpg)

Click Close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-9jpg)

Wait for few minutes until you see the Content Status as Green color which means the content has been distributed

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-10jpg)

Now we will make some changes in the Boot Images (64 bit and 32 bit) In the CM console click Software Library Operating system Click Boot Images Rightclick Boot Image (X64) and click on Properties Click on Customization tab and check the box Enable Command Support (testing only)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-11jpg)

On the same window click on Data Source tab check the box Deploy this boot image from the PXE service point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-4jpg)

Lets name the OS image as Windows 7 Professional Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-5jpg)

Click Next and Click Close We have successfully added the Operating System Installer

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-6jpg)

We will now distribute the OS to the distribution point To do so right click on the Windows 7 Professional click Distribute Content

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-7jpg)

Click on Add Select Distribution Point in the Add Distribution Points box select the Distribution Point and click OK Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-8jpg)

Click Close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-9jpg)

Wait for few minutes until you see the Content Status as Green color which means the content has been distributed

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-10jpg)

Now we will make some changes in the Boot Images (64 bit and 32 bit) In the CM console click Software Library Operating system Click Boot Images Rightclick Boot Image (X64) and click on Properties Click on Customization tab and check the box Enable Command Support (testing only)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-11jpg)

On the same window click on Data Source tab check the box Deploy this boot image from the PXE service point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-6jpg)

We will now distribute the OS to the distribution point To do so right click on the Windows 7 Professional click Distribute Content

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-7jpg)

Click on Add Select Distribution Point in the Add Distribution Points box select the Distribution Point and click OK Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-8jpg)

Click Close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-9jpg)

Wait for few minutes until you see the Content Status as Green color which means the content has been distributed

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-10jpg)

Now we will make some changes in the Boot Images (64 bit and 32 bit) In the CM console click Software Library Operating system Click Boot Images Rightclick Boot Image (X64) and click on Properties Click on Customization tab and check the box Enable Command Support (testing only)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-11jpg)

On the same window click on Data Source tab check the box Deploy this boot image from the PXE service point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-8jpg)

Click Close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-9jpg)

Wait for few minutes until you see the Content Status as Green color which means the content has been distributed

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-10jpg)

Now we will make some changes in the Boot Images (64 bit and 32 bit) In the CM console click Software Library Operating system Click Boot Images Rightclick Boot Image (X64) and click on Properties Click on Customization tab and check the box Enable Command Support (testing only)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-11jpg)

On the same window click on Data Source tab check the box Deploy this boot image from the PXE service point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-10jpg)

Now we will make some changes in the Boot Images (64 bit and 32 bit) In the CM console click Software Library Operating system Click Boot Images Rightclick Boot Image (X64) and click on Properties Click on Customization tab and check the box Enable Command Support (testing only)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-11jpg)

On the same window click on Data Source tab check the box Deploy this boot image from the PXE service point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-12jpg)

Click on Apply a box pops up which asks you to update distribution points click NO

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-13jpg)

Now we will distribute our Boot Image to the distribution point Right Click Boot Image (x64) and click Distribute Content Click on Add and Select DistributionPoint Click OK Click Next and close the wizard

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-14jpg)

Repeat the same step for Boot Image (x86)

Now we will create a Package and set up as task sequence There are 2 default packages provided by Microsoft we will make use of one of them and create anew package In the CM console Click on Software Library under Applications right click Packages select Create Package from Definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-15jpg)

Select Configuration Manager Client Upgrade Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-16jpg)

Select Always obtain source files from a source folder Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-17jpg)

Specify the package source folder Its SCCM SERVERSMS_SitecodeClient in our case its SMS_IND (where IND is the site code) Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-18jpg)

Click on next and Click Close We have successfully created the Package from the definition

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-19jpg)

Right click the package that we created just now Click on Distribute Content On the next page click on Add and select Distribution Point Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-20jpg)

Click Close We have distributed the package definition to the Distribution Point

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-21jpg)

Now we will create a Task Sequence In the CM console click on Software Library Operating Systems right click Task Sequence and click Create TaskSequence

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-22jpg)

Choose Build and capture a reference operating system image Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-23jpg)

Provide a Task Sequence name description For Boot Image select Boot Image (x64)

Note If you are deploying 32 bit OS select Boot Image (x86)

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-24jpg)

For the Package click on Browse and select Windows 7 Professional 64 bit en-us Edition as Windows 7 Professional click on Always use the sameadministrator password Provide a valid password and click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-25jpg)

We will not join the machine to the domain so click on Join a workgroup and provide a workgroup name Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-26jpg)

On Install CM client page Click on Browse and select Configuration Manager Client Upgrade 50 All In the Installation Properties specifySMSMP=SCCMPRAJWALLOCAL Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-27jpg)

Choose Do not install any software updates Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-28jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-29jpg)

Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-30jpg)

Specify where the captured image file should be saved Make sure that you provide a valid folder path and the image name should have wim as extension clickon Set and choose sccmadmin as the account which will have access to the folder path Click Next

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-31jpg)

Alright we have created a new task sequence Click close

(httpprajwaldesaicomwp-contentuploads201212Deploying-SCCM-2012-Part-14-Snap-32jpg)

Facebook 2 ﴾httpwwwfacebookcomsharersharerphpu=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitampt=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Twitter Google+ 0 ﴾httpsplusgooglecomshareurl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

LinkedIn 0 ﴾httpwwwlinkedincomshareArticle

mini=trueampro=trueamptrk=EasySocialShareButtonsamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampurl=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bit﴿

16SHARES

Previous Step by Step Installation Of Lync Server 2013 Standard Edition Part 31 ndash InstallingLync Server 2013 (httpprajwaldesaicomstep-by-step-installation-of-lync-server-2013-standard-edition-part-3-1-installing-lync-server-2013)

Deploying SCCM 2012 Part 15 ndash Build and capture Windows 7 x64(httpprajwaldesaicomdeploying-sccm-2012-part-15-build-and-capture-windows-7-

March 14 2016

Update 1602 for System CenterConfiguration Manager(httpprajwaldesaicomupdate-1602-for-system-center-configuration-manager)

February 11 2016

Move DP Content using ContentLibrary Transfer Tool(httpprajwaldesaicommove-dp-content-using-content-library-transfer-tool)

January 24 2016

How to deploy Java usingConfiguration Manager(httpprajwaldesaicomhow-to-deploy-java-using-configuration-manager)

January 07 2016

Minimum Permissions required topush SCCM client agent(httpprajwaldesaicomminimum-permissions-required-to-push-sccm-client-agent)

January 05 2016

SCCM 1511 Usage Data Levels andSettings(httpprajwaldesaicomsccm-1511-usage-data-levels-and-settings)

In-place Upgrade to ConfigurationManager 1511(httpprajwaldesaicomin-place-upgrade-to-configuration-manager-1511)

Pinterest Love This 0 Print 3 Email 0

Gmail ﴾httpsmailgooglecommailu0

view=cmampfs=1ampsu=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequenceampbody=httpprajwaldesaicomdeploying‐

sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐bitampui=2amptf=1﴿

Reddit 0 ﴾httpredditcomsubmiturl=httpprajwaldesaicomdeploying‐sccm‐2012‐part‐14‐build‐and‐capture‐windows‐7‐64‐

bitamptitle=Deploying+SCCM+2012+Part+14+E28093+Enabling+PXE2C+Adding+OS+Installer2C+Creating+Task+Sequence﴿

Tags Deploying SCCM 2012 (httpprajwaldesaicomtagdeploying-sccm-2012) SCCM 2012 (httpprajwaldesaicomtagsccm-2012)

About The Author

Prajwal Desai (httpprajwaldesaicomauthorprajwal)

I am Prajwal Desai and I have been working in the IT for over 6 years with a strong focus on Microsoft Server Technologies For the last five years as a SystemAdministrator I have been working on Lync SCCM Vmware VDI Exchange Windows Servers etc Irsquom currently very interested in everything related to ConfigurationManager 2012 Lync Windows Server and Exchange

(httpprajwaldesaicom) (PrajwalDesai) (httpsplusgooglecom112159121845941209559postsrel=author) (httpswwwyoutubecomuserPrajwalDesai) (httpsinlinkedincominprajwal-desai-70b54557) (httpswwwpinterestcomprajwaldesai)

Related posts

1

2

3

4

5

6

Web Solutions

Top 10 Desktop PCs

High Speed

Best Internet Plans

Local Internet

Best Web Browsers

(httpprajwaldesaicomupdate-1602-for-system-center-configuration-manager)

(httpprajwaldesaicommove-dp-content-using-content-library-transfer-tool)

(httpprajwaldesaicomhow-to-deploy-java-using-configuration-manager)

(httpprajwaldesaicomminimum-permissions-required-to-push-sccm-client-agent)

(httpprajwaldesaicomsccm-1511-usage-data-levels-and-settings)

(httpprajwaldesaicomin-place-upgrade-to-configuration-manager-1511)

January 01 2016

Sponsored

Inspiration Weekly

G700 Tactical Flashlight

The Sports Lane

xE1 Golf

Financika Online Trading

Goal

Fired Employee Bought the Business a Year after he Got Fired

Incredible Military Grade Flashlight Now Available

15 Former Pro Athletes And Their UNGLAMOROUS Life After Sports

(Video) Simple Way to Cut Strokes shy No Practice Required

Why Should I Invest My Money in Forex

UEL Selfie Football Sticker

12 Comments PrajwalDesaicom 1

Share⤤ Sort by Best

Join the discussionhellip

bull Reply bull

Shahin Patwary bull 18 days agoHello Prajwalhope you keeping well i buildup sccm 2012 i facing some problem when i try to Distribution Point add showing sccmservercom but dose not show sccmservercomthink i was mistake previous any configure pls suggest me

bull Reply bull

Nizz bull 8 months agoHi Prajwal

Is it possible to run SSCM Task sequence steps after loading in to the installed windows using a autoshylogin account I need to run some scripts that need user to loginusing a particular account and then the task sequence is required to carry few script install please advice

bull Reply bull

Robbie Webster bull 9 months agoHi the task s works perfectly up until windows starts up for the first time It is stuck on preparing windows for the first time Any advice please

bull Reply bull

Chad bull 2 years agoPrajwal

Great post very helpful Ive recently deployed a SCCM 2012 R2 (version 5079581000) environment and when I attempt to create a build and capture TS through thewizard I have a problem When I get to the Create Task Sequence Wizard shy Install the operating system window my first field option is titled Image package as opposedto Package (illustrated in your screen shot above) When I click the Browse button there are no installation packages listed I suspect the wizard is accessing the defaultlocation for images (wim) and not installer packages Is there something Im missing

Thank you

Chad

bull Reply bull

Kashif Ali bull 8 months agogt Chad

I am facing the same issue can you please guide how to import if possible with the screenshot or related URL or vdo asap will be very helpful

Chad if you have any info please advice

ThanksKashif ALi

bull Reply bull

Prajwal Desai bull 2 years agogt Chad

Chad shy I believe I have missed adding a screenshot where in I had imported wim file Please import the wim file and proceed with the rest of the steps

bull Reply bull

OMUS bull 2 years agoPrajwal thanks a lot for nice posts you are very helpful hand to meAs mentioned by Dialshyin either we need to add Installwim to display on images or as workaround need to edit the TS and change the selection from images to source files

bull Reply bull

Ramesh Fatnani bull 2 years agoHi PrajwalCan you share a step by step guide to deploy MS Lync 2013 using SCCM 2012

bull Reply bull

Prajwal Desai bull 2 years agogt Ramesh Fatnani

I suppose you want to deploy the Lync 2013 client using SCCM 2012 If yes I will create a post on that soon

bull Reply bull

arun bull 2 years agoHiCan you give me the detail step by step for deployment for win 7 via SCCM 2007

bull Reply bull

Prajwal Desai bull 2 years agogt arun

Nope I dont have the guide or post for deploying windows 7 using sccm 2007 There is document by Microsoft for the same and you can download it here shyhttpwwwmicrosoftcomenshyus

DialshyIN bull 3 years agoHiI believe there is a step missing the build and capture task sequence requires an OS image (installwim) however the steps only included the OS installer (source files)so the task seqeunce step cant be completed

Recommend

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

Share rsaquo

bull Reply bull

so the task seqeunce step cant be completedOtherwise a very helpful tutorial

Subscribe Add Disqus to your site Add Disqus Addd Privacyὑ

Share rsaquo

1

2

3

4

5

6

Web Solutions

Top 10 Desktop PCs

High Speed

Best Internet Plans

Local Internet

Best Web Browsers

March 14 2016

March 08 2016

March 07 2016

March 07 2016

RECENT POSTS

Update 1602 for System CenterConfiguration Manager(httpprajwaldesaicomupdate-1602-for-system-center-configuration-manager)

How to add and verify a Domain inMicrosoft Intune(httpprajwaldesaicomhow-to-add-and-verify-a-domain-in-microsoft-intune)

Backdoor in Custom Content TypeManager Plugin(httpprajwaldesaicombackdoor-in-custom-content-type-manager-plugin)

How to setup create Microsoft IntuneAccount (httpprajwaldesaicomhow-to-setup-create-microsoft-intune-account)

(httpprajwaldesaicomupdate-1602-for-system-center-configuration-manager)

(httpprajwaldesaicomhow-to-add-and-verify-a-domain-in-microsoft-intune)

(httpprajwaldesaicombackdoor-in-custom-content-type-manager-plugin)

(httpprajwaldesaicomhow-to-setup-create-microsoft-intune-account)

TODAYrsquoS WEATHER

BengaluruToday 03142016

29

SUBSCRIBE TO OURNEWSLETTER

Email Address

Subscribe

TESTIMONIALS

ldquoHi Prajwal I mustcongratulate you forexcellent articles well doneYou are helping lots ofpeople with your excellentpostsrdquo

ndash Geneva

RANDOM POSTS

SOCIAL PROFILES

CATEGORIES(HTTPPRAJWALDESAICOM)

EXCHANGE(HTTPPRAJWALDESAICOMEXCHANGE)

LYNC(HTTPPRAJWALDESAICOMLYNC)

NEWS(HTTPPRAJWALDESAICOMNEWS)

SYSTEM CENTER(HTTPPRAJWALDESAICOMSYSTEM-CENTER)

PAGES(HTTPPRAJWALDESAICOM)

HOME(HTTPPRAJWALDESAICOMHOME)

ABOUT ME(HTTPPRAJWALDESAICOMABOUT-ME)

FORUMS(HTTPPRAJWALDESAICOMCOMMUNITY)

CONTACT ME(HTTPPRAJWALDESAICOMCONTACT-ME)

SCCM(HTTPPRAJWALDESAICOMSCCM)

SCCM 2012 R2(HTTPPRAJWALDESAICOMTAGSCCM-2012-R2)

SCCMTROUBLESHOOTING(HTTPPRAJWALDESAICOMTAGSCCM-TROUBLESHOOTING)

STEP-BY-STEP(HTTPPRAJWALDESAICOMTAGSTEP-BY-STEP)

SCCM 1511

LYNC(HTTPPRAJWALDESAICOMLYNC)

STEP-BY-STEP(HTTPPRAJWALDESAICOMTAGSTEP-BY-STEP)

LYNC 2010(HTTPPRAJWALDESAICOMTAGLYNC-2010)

LYNC 2013(HTTPPRAJWALDESAICOMTAGLYNC-2013)

LYNC SERVER2013

EXCHANGE(HTTPPRAJWALDESAICOMEXCHANGE)

EXCHANGE 2010(HTTPPRAJWALDESAICOMTAGEXCHANGE-2010)

EXCHANGE 2013(HTTPPRAJWALDESAICOMTAGEXCHANGE-2013)

MAILBOX(HTTPPRAJWALDESAICOMTAGMAILBOX)

EMAIL ACCOUNT(HTTPPRAJWALDESAICOMTAGEMAIL-ACCOUNT)

WINDOWS SERVER(HTTPPRAJWALDESAICOMWINDOWS-SERVER)

ACTIVEDIRECTORY(HTTPPRAJWALDESAICOMTAGACTIVE-DIRECTORY)

SERVER 2008 R2(HTTPPRAJWALDESAICOMTAGSERVER-2008-R2)

GROUP POLICY(HTTPPRAJWALDESAICOMTAGGROUP-POLICY)

WINDOWS CLIENT(HTTPPRAJWALDESAICOMWINDOWS-CLIENT)

WINDOWS XP(HTTPPRAJWALDESAICOMTAGWINDOWS-XP)

WINDOWS 10(HTTPPRAJWALDESAICOMTAGWINDOWS-10)

WINDOWS 7(HTTPPRAJWALDESAICOMTAGWINDOWS-7)

WINDOWS 81

MISC(HTTPPRAJWALDESAICOMMISC)

LAB SETUP(HTTPPRAJWALDESAICOMTAGLAB-SETUP)

MDT(HTTPPRAJWALDESAICOMTAGMDT)

SQL SERVER(HTTPPRAJWALDESAICOMTAGSQL-SERVER)

WSUS(HTTPPRAJWALDESAICOMTAGWSUS)

(httpprajwaldesaicominstalling-system-center-2012-r2-configuration-manager)

Installing System Center 2012R2 Configuration Manager(httpprajwaldesaicominstalling-system-center-2012-r2-configuration-manager)

a (httpstwittercomPrajwalDesai)

c (httpsplusgooglecom112159121845941209559posts)

d (httpswwwpinterestcomprajwaldesai)

j (httpswwwlinkedincominprajwal-desai-70b54557)

r (httpswwwyoutubecomuserPrajwalDesai)

y (httpPrajwalDesaicom)

Z(httpssocialtechnetmicrosoftcomprofileprajwal20desai)

1 (mailtosupportprajwaldesaicom)

(httpprajwaldesaicomfeed)

(httpsdisquscomhomeforumprajwaldesai)

Copyright copy 2012-2016 by PrajwalDesaicom (httpwwwprajwaldesaicom)

(HTTPPRAJWALDESAICOMTAGSCCM-1511)

(HTTPPRAJWALDESAICOMTAGLYNC-SERVER-2013)

RSAT(HTTPPRAJWALDESAICOMTAGRSAT)

(HTTPPRAJWALDESAICOMTAGWINDOWS-8-1)

(httpstwittercomPrajwalDesai) (httpwwwyoutubecomuserPrajwalDesai)

(httpsplusgooglecom112159121845941209559posts)

(httpwwwpinterestcomprajwaldesai) (httpprajwaldesaicomfeed)