Demo Warehouse Management R3 DR
-
Upload
raul-cardin-segura -
Category
Documents
-
view
259 -
download
0
Transcript of Demo Warehouse Management R3 DR
DYNAMICS AX R3DEMO: WAREHOUSE MANAGEMENT
AGENDA Main concepts
Glossary Main warehouse operations supports Inbound process
Demo purchase process Location directive Work template Mobile device
Outbound process Demo sales process Wave Template
MAIN WAREHOUSE OPERATIONS SUPPORT Inbound operations and put away
Purchase Orders Return Orders Transfer Orders Kanban
Outbound operations picking Sales Orders Transfers Orders Productions Orders Kanban
Inventory Operations Movements Replenishment Cycle counting Adjustments Inventory status change - bloking
COMMON AREAS IN LAYOUT OF A WAREHOUSE
Specific LocationExample : 01,24, Refurbished, Refurbished TV, Stage, 01A03R02S01B
Site: 01 Home Screens ProductionWarehouse: 24 Main Screens DC Zone Groups: RefurbishedZone ID: Refurbished TVLocation ID: StageLocation: 01A03R02S01B
MAIN CONCEPTS License Plate – LP – Inbound, Outbound, Inventory Location directive – Inbound, Outbound, Inventory Wave Templates – Outbound Work Templates – Inbound, Outbound, Inventory RF menu configurations – Inbound, Outbound, Inventory Replenishment templates – Inventory Load planning workbench – Inbound, Outbound Inventory Status Dimension – Inbound, Outbound, Inventory
GLOSSARY License Plates: in AX are a unique ID that can be barcoded and assigned to a pallet,
location, forklift, etc. Uses: pallets / containers can be assigned a unique license plate number. When
receiving or putting away an item, items can be assigned to a specific license plate (i.e. to a specific container / pallet). Then, when that container or pallet is transferred, shipped, or received at a new location, the user need only indicate which license plate is being moved, and all of the items stored on that container/pallet will be updated as well, without having to individually identify them.
GLOSSARY Location: The exact and smallest area where an item can we storage inside a
warehouse. In the layout of a warehouse the location is typically have the format of aisle, rack, shelf and bin.
Location Types: are used to describe or define the locations that your warehouse will be using. Example: BAYDOOR, BULK, INBOUND, STAGE, OUTBOUND, TV PICKING. Cellphones Picking.
LOCATION:
Site, Warehouse, Location, Location Profile ID, Zone ID 01,Main DC, 03A 03R 01S 01B, BULK, Spare Part Zone
Aisle: 3 , Rack:3, Shelf:3, Bin:01
GLOSSARY
LOCATION DIRECTIVESLocation directives, as the name suggests, are rules used to direct work transactions to the appropriate locations in the warehouse on a specific point of the business process, like receiving inventory from a PO or taking out inventory from a SO.
WORKWorks are specific task assigned to a user in order to complete a Work ID that englobe a list of works, Examples: Pick, Put, Print, Counting, Adjustments, Status change.
LOCATION DIRECTIVES:
ITEMS A001
LOCT: 00A001R01S
INBOUND
POS:2, W: 70, Z: BULK06, L: 00A001R01S WORK “PUT”
Instruction: All purchase orders arrivals in the warehouse 70, site 2, with item A000, If the quantity is between 1-9 , put the inventory in the Zone Bulk06 on the available locations from 00A001R01S – 00A004R02S
WORK TEMPLATE
Work templates are a tool uses to create work at various points in the system to specific user.
For example, a purchase order has been received, so a work item must be created for somebody to go and pick items from the defaulted receiving dock and follow the location directive action to put the item away in a particular location. The other areas where work is created are reservation/picking, production including lean Kanban processes, inventory transfers, and adjustments.
WORK TEMPLATE Instruction: to all the Purchase Orders arrivals from
the warehouse 70 with the item A001, create the work Pick and Put.
ITEMS A001
LOCT: 00A001R01S
INBOUND
POS:2, W: 70, WORK “PICK” S:2, W: 70, WORK “PUT”
ITEMS A001
PRACTICE SECTION – INBOUND PO
Receiving Documen
tLocation directive
Work Template
Create Work
Complete Work
Goods Arrived
GoodsOn
hand
PO WITH WAREHOUSE MANAGEMENT AND ITEM
ENTER TO THE DEVICE AND SELECT PO
ITEMS A001
ITEMS A001
WORK CREATED WITH 2 INSTRUCTIONS PICK & PUT
PUT AWAY FROM A PO – WORK PICK
ITEMS A001
ITEMS A001
ITEMS A001Location
01A09R03S02B
VERIFY INVENTORY ON HAND
ITEMS A001Location
01A09R03S02B
OUTBOUND – SALES ORDERS - WM
To ship sales order details, Warehouse Management for Microsoft Dynamics AX creates shipments and loads.
A shipment can be one or multiple sales orders going to the same destination. A shipment is a group of sales orders for the same customer or for the same destination.
A load is a group of sales orders grouped together and typically going out on a single truck, rail car, or other mode of delivery.
A load can have one or many shipments, and a shipment can have one or many sales orders.
LOCATION DIRECTIVES FOR SO AND PICK WORK
LOCATION DIRECTIVES FOR SO AND PUT WORK
WORK TEMPLATE FOR SO ON 70 WAREHOUSE
WAVE TEMPLATES
A sales order is created, which will create a shipment. Typically, shipments refer to the same destination location. Multiple shipments can be created based on multiple sales orders.
A wave template takes the shipments and creates the work which can create loads.
Wave templates are used to define the wave execution process and setup criteria for when waves are created, executed, and released.
WAVE TEMPLATE
PRACTICE SECTION – OUTBOUND SO
Load planning
workbenchWaves
Assign lines to waves
Execute the wave
Release the wave
Start and complete
workReport as shipped
Sales Order Line
Goods
Shipped
CHECK INVENTORY ON HAND BY LOCATION
CREATE SO FOR A QUANTITY OF 4
RESERVE THE INVENTORY FOR THE SO
RELEASE SO TO WM, SHIPMENT, WAVE AND WORK WILL BE CREATED
VERIFY THAT THE SHIPMENT WAS CREATED
THE WORKS HAS BEEN CREATED
MOBIL DEVICE – LOG ON AND SELECT THE WORK ID
ENTER THE LICENSE PLATE IN WHICH THE INVENTORY IS AVAILABLE IN THAT LOCATION. TYPICALLY, YOU WILL SCAN THE LP BAR CODE.
VERIFY THAT THE WORK IS CLOSED AND IN THE FINAL LOCATION
SHIPMENT CLOSED
CYCLE COUNTING Warehouse Management can create cycle counting work. Cycle count work is its
own “type” of work which can be executed through the mobile device and verified through the client. Depending on the configuration, there are different ways to create and execute cycle counting work in order to verify a warehouse’s inventory.
Threshold cycle counting by quantity
THRESHOLD CYCLE COUNTING BY PERCENTAGE
SELECT ITEM AND LOCATION
CASE TEST OF CYCLE COUNTING THRESHOLD QTYVerify the inventory on hand of an Item in a specific location
ITEM: A0001, Site: 2, Warehouse: 70, Location: 01A01R1S1B, Qty: 10
CREATE DE CYCLE COUNTING THRESHOLD AND SET THE QTY
CREATE THE SO THAT OVERPASS THE THRESHOLD LIMIT
RELEASE THE SO TO WAREHOUSE ACTIONS
IF INVENTORY BLOCKING IS SELECTED, THE ITEM CANNOT BE SHIPPED OR SPECIFIED ON A SALES ORDER, TRANSFER ORDER, OR PRODUCTION BOM. IN ADDITION, THE INVENTORY IS NOT CONSIDERED AVAILABLE FOR RESERVATION. IT IS STILL AVAILABLE IN THE LOCATION LEVEL, SO THAT THE INVENTORY CAN BE MOVED IN THE WAREHOUSE.
INVENTORY STATUS
EXAMPLE: CHANGE INVENTORY STATUS AT THE TIME OF RECEIVING ON A PO, FROM AVAILABLE TO DAMAGE