Dektite® Original - Lakeside Construction Fasteners · Dektite® Original The original watertight...
2
Dektite Original ® The original watertight flashing for metal roof penetrations Color Boots Clear markings in metric and imperial measures Makes for easier cutting to pipe size Proven design Associated with the roofing industry globally for over 40 years Easy to identify Dektite brand name engraved on product for traceability Unique cone design Provides 10mm (1/2”) continuous contact with flashed pipe provid ing a watertight seal Thirty five year warranty U R P C Size ranges: #3; #5; #8 Black, Grey, White, Bright Red, Brown, Terra Cotta, Dark Green, Light Green, Dark Blue, Light Blue Easy to Work With Just fit it and forget it - we’ve got you covered. To Order Call: 800-537-4160 Or Visit our Website www.lakeside-fasteners.com
Transcript of Dektite® Original - Lakeside Construction Fasteners · Dektite® Original The original watertight...
www.deks.com.au
Dektite Original®
The original watertightflashing for metal roofpenetrations
Color Boots
Clear markings in metric and imperial measuresMakes for easier cutting to pipe size
Proven designAssociated with the roofing industry globally for over 40 years
Easy to identifyDektite brand name engraved on product for traceability
Unique cone designProvides 10mm (1/2”) continuous contact with flashed pipe providinga watertight seal
Thirty five year warranty
A Skellerup Industries Company
U
R
P CSize ranges: #3; #5; #8Black, Grey, White, Bright Red, Brown, Terra Cotta, Dark Green, Light Green, Dark Blue, Light Blue
Easy to Work With
Just fit it and forget it - we’ve got you covered.
To Order Call: 800-537-4160 Or Visit our Websitewww.lakeside-fasteners.com
www.deks.com.au
A Skellerup Industries Company
Selection Guide
A
Installation Information
vailable in Black and Grey EPDM or Red Silicone
DEKTITE RETROFIT GREY EPDM
DEKTITE ORIGINAL RED SILICONE
1Cut Dektiteat appropriatepipe diametermarking.
®
2Slide Dektiteflashing downover pipe.
3
Apply sealant onunderside offlexible aluminumbase.
4Press Dektitebase into contoursof panelconfiguration.
5Fasten Dektiteto surface withlong -life, selfdrilling fasteners.Apply additionalsealant aroundbase if desired.
®
®®
Always use the neutral cure low modulus silicone for sealingIn corrosive and coastal environments fix using blind aluminium rivets
· ·
Black EPDM
DF100B
DF102B
DF103B
DF104B
DF105B
DF106B
DF107B
DF108B
DF109B
DF100G
DF102G
DF101B DF101G
DF103G
DF104G
DF105G
DF106G
DF107G
DF108G
DF109G
DF200RE
DF202RE
DF201RE
DF203RE
DF204RE
DF205RE
DF206RE
DF207RE
DF208RE
DF209RE
Grey EPDM Red Silicone
Dektite Original #0
Dektite Original #1
Dektite Original #2
Dektite Original #3
Dektite Original #7
Dektite Original #8
Dektite Original #9
Dektite Original #4
Dektite Original #5
Dektite Original #6
mm inch mm inch
DEKS Code Description Pipe OD Base OD Pitch CartonQTY
0 - 35
5 - 60
45 - 80
5 - 127
75 - 160
108 - 190
125 - 230
150 - 280
175 - 330
254 - 483
40
10
10
10
10
5
5
5
5
1
0-40° or 93
124
162
202
276
238
322
372
422
647
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0 - 13/8”
¼ - 2½”
1¾ - 3¼”
¼ - 5”
3 - 6¼”
4¼ - 7½”
5 - 9”
6 - 11”
7 - 13”
10 - 19”
”3 3/4
43/4 ”
1/26 ”
8”
1/29 ”
11”
3/412 ”
”25½
3/414 ”
3/416 ”
EPDM will withstand constant temperatures at thge roofline of -50°C (58°F) to 115°C (239°F) and up to 150°C (302°F intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F) intermittently.Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
Need to flash a tiled roof? Contact DEKS to discuss the tile roof flashing range.
Easy to Work With
Need to flash a tiled roof? Contact Lakeside Construction Fasteners to discuss the tile roof flashing range.
To Order Call: 800-537-4160 Or Visit our Websitewww.lakeside-fasteners.com
EPDM will withstand constant temperatures at the roofline of -50°C (-58°F) to 115°C (239°F) and up to 150°C (302°F) intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F).Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
www.deks.com.au
A Skellerup Industries Company
Selection Guide
A
Installation Information
vailable in Black and Grey EPDM or Red Silicone
DEKTITE RETROFIT GREY EPDM
DEKTITE ORIGINAL RED SILICONE
1Cut Dektiteat appropriatepipe diametermarking.
®
2Slide Dektiteflashing downover pipe.
3
Apply sealant onunderside offlexible aluminumbase.
4Press Dektitebase into contoursof panelconfiguration.
5Fasten Dektiteto surface withlong -life, selfdrilling fasteners.Apply additionalsealant aroundbase if desired.
®
®®
Always use the neutral cure low modulus silicone for sealingIn corrosive and coastal environments fix using blind aluminium rivets
· ·
Black EPDM
DF100B
DF102B
DF103B
DF104B
DF105B
DF106B
DF107B
DF108B
DF109B
DF100G
DF102G
DF101B DF101G
DF103G
DF104G
DF105G
DF106G
DF107G
DF108G
DF109G
DF200RE
DF202RE
DF201RE
DF203RE
DF204RE
DF205RE
DF206RE
DF207RE
DF208RE
DF209RE
Grey EPDM Red Silicone
Dektite Original #0
Dektite Original #1
Dektite Original #2
Dektite Original #3
Dektite Original #7
Dektite Original #8
Dektite Original #9
Dektite Original #4
Dektite Original #5
Dektite Original #6
mm inch mm inch
DEKS Code Description Pipe OD Base OD Pitch CartonQTY
0 - 35
5 - 60
45 - 80
5 - 127
75 - 160
108 - 190
125 - 230
150 - 280
175 - 330
254 - 483
40
10
10
10
10
5
5
5
5
1
0-40° or 93
124
162
202
276
238
322
372
422
647
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0 - 13/8”
¼ - 2½”
1¾ - 3¼”
¼ - 5”
3 - 6¼”
4¼ - 7½”
5 - 9”
6 - 11”
7 - 13”
10 - 19”
”3 3/4
43/4 ”
1/26 ”
8”
1/29 ”
11”
3/412 ”
”25½
3/414 ”
3/416 ”
EPDM will withstand constant temperatures at thge roofline of -50°C (58°F) to 115°C (239°F) and up to 150°C (302°F intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F) intermittently.Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
Need to flash a tiled roof? Contact DEKS to discuss the tile roof flashing range.
Easy to Work With
Need to flash a tiled roof? Contact Lakeside Construction Fasteners to discuss the tile roof flashing range.
www.lakeside-fasteners.com
EPDM will withstand constant temperatures at the roofline of -50°C (-58°F) to 115°C (239°F) and up to 150°C (302°F) intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F).Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
www.deks.com.au
A Skellerup Industries Company
Selection Guide
A
Installation Information
vailable in Black and Grey EPDM or Red Silicone
DEKTITE RETROFIT BLACK EPDM
DEKTITE ORIGINAL RED SILICONE
1Cut Dektiteat appropriatepipe diametermarking.
®
2Slide Dektiteflashing downover pipe.
3
Apply sealant onunderside offlexible aluminumbase.
4Press Dektitebase into contoursof panelconfiguration.
5Fasten Dektiteto surface withlong -life, selfdrilling fasteners.Apply additionalsealant aroundbase if desired.
®
®®
Always use the neutral cure low modulus silicone for sealingIn corrosive and coastal environments fix using LCF Long-Life ZMAX / SC STEEL GUARD fasteners. Heads of long-life fasteners wont Red Rust!
· ·
Black EPDM
DF100B
DF102B
DF103B
DF104B
DF105B
DF106B
DF107B
DF108B
DF109B
DF100G
DF102G
DF101B DF101G
DF103G
DF104G
DF105G
DF106G
DF107G
DF108G
DF109G
DF200RE
DF202RE
DF201RE
DF203RE
DF204RE
DF205RE
DF206RE
DF207RE
DF208RE
DF209RE
Grey EPDM Red Silicone
Dektite Original #0
Dektite Original #1
Dektite Original #2
Dektite Original #3
Dektite Original #7
Dektite Original #8
Dektite Original #9
Dektite Original #4
Dektite Original #5
Dektite Original #6
mm inch mm inch
DEKS Code Description Pipe OD Base OD Pitch CartonQTY
0 - 35
5 - 60
45 - 80
5 - 127
75 - 160
108 - 190
125 - 230
150 - 280
175 - 330
254 - 483
40
10
10
10
10
5
5
5
5
1
0-40° or 93
124
162
202
276
238
322
372
422
647
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0-40° or
0 - 13/8”
¼ - 2½”
1¾ - 3¼”
¼ - 5”
3 - 6¼”
4¼ - 7½”
5 - 9”
6 - 11”
7 - 13”
10 - 19”
”3 3/4
43/4 ”
1/26 ”
8”
1/29 ”
11”
3/412 ”
”25½
3/414 ”
3/416 ”
EPDM will withstand constant temperatures at thge roofline of -50°C (58°F) to 115°C (239°F) and up to 150°C (302°F intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F) intermittently.Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
Need to flash a tiled roof? Contact DEKS to discuss the tile roof flashing range.
Easy to Work With
Need to flash a tiled roof? Contact Lakeside Construction Fasteners to discuss the tile roof flashing range.
To Order Call: 800-537-4160 Or Visit our Websitewww.lakeside-fasteners.com
EPDM will withstand constant temperatures at the roofline of -50°C (-58°F) to 115°C (239°F) and up to 150°C (302°F) intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F).Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
Selection GuideBlack EPDM
–
DF102B
DF103B
DF104B
DF105B
DF106B
DF107B
DF108B
DF109B
DF100G
DF102G
DF101B DF101G
DF103G
DF104G
DF105G
DF106G
DF107G
DF108G
DF109G
–
DF202RE
DF201RE
DF203RE
DF204RE
DF205RE
DF206RE
DF207RE
DF208RE
DF209RE
Grey EPDM Red Silicone
Dektite Original Mini
Dektite Original #1
Dektite Original #2
Dektite Original #3
Dektite Original #7
Dektite Original #8
Dektite Original #9
Dektite Original #4
Dektite Original #5
Dektite Original #6
mm inch
DEKS Code Description Pipe OD CartonQTY
0 - 35
5 - 60
45 - 80
5 - 127
75 - 160
108 - 190
125 - 230
150 - 280
175 - 330
254 - 483
40
10
10
10
10
5
5
5
5
2
0 - 13/8”
¼ - 2½”
1¾ - 3¼”
¼ - 5”
3 - 6¼”
4¼ - 7½”
5 - 9”
6 - 11”
7 - 13”
10 - 19”
– DF606 DF706
DF203G
DF204G
DF205G
DF206G
DF207G
DF208G
DF209G
Grey Silicone
–
–
–
–
Dektite Original #10 381 - 609 115 - 24”
EPDM will withstand constant temperatures at the roofline of -50°C (-58°F) to 115°C (239°F) and up to 150°C (302°F) intermittently.Red Silicone will withstand constant temperatures at the roofline of -50°C (-58°F) to 200°C (392°F) and up to 250°C (482°F).Please Note that the outside temperature of the pipe may be significantly different to the exit temperature of the appliance.
Grey White Bright Red Brown Terra
CottaDark Green
Light Green
Dark Blue
Light Blue Black
DektiteDescription
Pipe OD Carton Quantity
DF100G – – – – – – – – – Original Mini 0 - 35 0 - 1 3/8” 40
DF101G – – – – – – – – DF101B Original #1 5 - 60 1/4 - 2 1/2” 10
DF102G – – – – – – – – DF102B Original #2 45 - 80 1 3/4 - 3 1/4” 10
DF103G DF103WH DF103BR DF103BN DF103TC DF103DG DF103LG DF103DB DF103LB DF103B Original #3 5 - 127 1/4 - 5” 10
DF104G – – – – – – – – DF104B Original #4 75 - 160 3 - 6 1/4” 10
DF105G DF105WH DF105BR DF105BN DF105TC DF105DG DF105LG DF105DB DF105LB DF105B Original #5 108 - 190 4 1/4 - 7 1/2” 5
DF106G – – – – – – – – DF106B Original #6 125 - 230 5 - 9” 5
DF107G – – – – – – – – DF107B Original #7 150 - 280 6 - 11” 5
DF108G DF108WH DF108BR DF108BN DF108TC DF108DG DF108LG DF108DB DF108LB DF108B Original #8 175 - 330 7 - 13” 5
DF109G – – – – – – – – DF109B Original #9 254 - 483 10 - 19” 2
DF606 – – – – – – – – – Original #10 381 - 609 15 - 24” 1
mm inch
![Quasi-steady-state analysis of coupled flashing ratchetsbresslof/publications/15-12.pdfsystems of coupled flashing ratchets [6,13–15]. A major focus of these studies was on self-organization](https://static.fdocuments.in/doc/165x107/6022c7f591e4707c790d16c1/quasi-steady-state-analysis-of-coupled-iashing-bresslofpublications15-12pdf.jpg)
