DECORATIVE & ARCHITECTURALCONCRETE SOLUTIONS

2

CONTENTSPigmented Coatings .......................... 4

Epoxy Flakes & Metallics .................... 6

Micro Topping .................................... 8

Thin Overlays ...................................... 9

Non-Slip Coatings ............................ 10

Stampable Products ......................... 12

Vertical Coatings .............................. 14

Surface Preparation .......................... 16

Concrete Stains ................................ 18

Exterior Sealers ................................. 20

Interior Sealers .................................. 21

XS Precast ......................................... 22

Precast Accessories .......................... 23

XS Hybrid GFRC ............................... 24

Cheng D-FRC ................................... 25

XS Terrazzo........................................ 26

XS Lightweight.................................. 27

Products Index

Surface Preparation ...................... 28

Stamping Concrete ...................... 30

Solvents ......................................... 31

Non-Slip ........................................ 32

Colorants ....................................... 33

Bag Mix - Overlay & Patch ........... 35

Acrylic Sealers ............................... 37

High Performance Coatings ......... 39

Xtreme Series ................................ 41

Xtreme Series Accessories ........... 42

XS Application Charts ...................... 45

Integral Color Chart ......................... 46

Main Color Chart .............................. 47

SureCrete Design is a decorative & specialty concrete manufacturer of eco-friendly solutions for concrete floors, walls, countertops, ceilings and architectural elements.

15246 Citrus Country Drive, Dade City Florida 33523 USA, Toll Free 1.800.544.8488, Local 1.352.567.7973, Fax 1.352.521.0973

Websites: www.SureCreteDesign.com, www.TheConcreteWhisperer.com, www.SureCrete.TV

3

The Only In House Concrete Coatings Tinting System

Pigmented Coatings

ON DEMAND COATINGS

100% solid epoxy solvent-based acrylics

water-based acrylicswater-based epoxyexterior wall paints

• same day order completion• reduced inventory• 228 standard colors• limitless custom colors• fade resistant pigments

As seen in

4

PIGMENTED ACRYLICS

Pigmented Acrylic sealers are designed to be applied to many different types of concrete surfaces. They deliver a solid, non-transparent color that will hide the color of the concrete surface including stains.

Pigmented AcrylicSolvent-Based

600 g/L VOC30% SolidsSatin Sheen

30 Standard Colors

Pigmented Acrylic Solvent-Based Low VOC

400 g/L VOC30% SolidsSatin Sheen

30 Standard Colors

Pigmented AcrylicWater-Based

100 g/L VOC30% SolidsSatin Sheen

30 Standard Colors

Scan the QR code to the right using the QR Scanner mobile application to find the nearest location featuring our

ON DEMAND COATINGS228 Colors ON DEMAND COATINGS228 Colors ON DEMAND COATINGS228 Colors

5

PIGMENTED EPOXIES

Pigmented Epoxies are the perfect choice for high traffic, interior concrete surfaces. They deliver commercial grade performance, superior chemical resistance, improve light reflectivity and are allergen-free flooring systems. These high performance coatings are generally used in one of four designs: solid color, metallics, flakes and quartz.

Pigmented Dura-KoteWater-Based Epoxy

175 g/L VOC52% Solids

High Gloss Sheen30 Standard Colors

Pigmented Dura-KoteEpoxy 100

0 g/L VOC100% Solids

High Gloss Sheen30 Standard Colors

Scan the QR code to the right using the QR Scanner mobile application to find the nearest location featuring our ON DEMAND COATINGS

ON DEMAND COATINGS228 Colors ON DEMAND COATINGS228 Colors

6

Epoxy Metallic flooring provides a seamless three dimensional appearance thru the use of suspended reflective mica pearl inside of an Epoxy 100% Solids clear coating. This flooring system is ideally suited for heavy traffic residential and commercial settings.

EPOXY METALLICS

Dura-Kote Metallics System

• Apply base coat of pigmented Epoxy

• Mix Metallic powder into Epoxy 100%

• Apply High Performance Clear Coat

Bark Brown

Champagne

Mahogany

Royal Blue

Blonde

Charcoal

Midnight Blue

Sequoia

Brass

Copper

Onyx

Slate

Bronze

Dark Cherry

Pearl

Toffee

Burnt Orange

Gun Metal

Pewter

Wine Red

EPOXY 100METALLICS PFC-120PIGMENTEDEPOXY WB

7

EPOXY FLAKES

Epoxy Flakes can create a vibrant, multi-hued, slip resistant and seamless flooring system. Epoxy Flakes yield an exceptionally durable and long lasting floor for commercial kitchens, medical center walkways, retail centers and high traffic residential areas.

Asphalt

Durango

Savannah

Buckskin

Gravel

Sierra

Chimney

Nevada

Smoke

Cosmos

Prairie

Wrangler

Dura-Kote Flakes System

• Apply base coat of pigmented Epoxy

• Broadcast Epoxy Flakes

• Apply High Performance Clear Coat

FLAKES PFC-180PIGMENTEDEPOXY WB

PIGMENTEDEPOXY 100

OR

8

Micro Topping is an extremely versatile and durable cementitious topping for interior concrete surfaces. Micro Topping is designed for horizontal surfaces, but may be used on vertical surfaces to create a faux Venetian plaster look. Application is applied by hand trowel or stand-up squeegee. Micro Topping creates a supremely smooth, tight-troweled finish.

Micro ToppingNew single coat formulaZero VOC – Just add waterSelf Bonding (no primer)

Create a new canvas for staining concrete

Coverage Rate200 - 300 ft² (18.6 - 27.9 m²)

Tape Patterns

What Tape To Use?Fiber reinforced tape is essential in creating a clean pull and finished look.

Technical DataCompressive Strength ASTM C-109:28 day 3,525 PSI (24,300 kPa)

ECO-STAINCOLOR PACKS WB POLYURETHANEMICRO TOPPING

MICRO TOPPING

9

SureSpray is the most versatile thin concrete overlay in our portfolio. It combines eco-friendly features with the ability to be troweled, sprayed or squeegeed. Used in both interior and exterior applications, SureSpray gives you the ability to resurface and transform a concrete floor while also generating “LEED” points on many projects.

SureSprayZero VOC – Just add waterSelf Bonding (no primer)

Freeze/Thaw Climate ApprovedSpray – Squeegee – Trowel

Coverage RateBase 175 ft² (16.3 m²)Finish 150 ft² (13.9 m²)

Wet Bubble

Creating a Wet BubbleAdd water to the maximum amount and spray it out of a grout sprayer or gravity feed hopper gun.

Technical DataCompressive Strength ASTM C-109:28 day 4,250 PSI (29,300 kPa)

HS 360SURESPRAY

THIN OVERLAYS - SURESPRAY

ECO-STAINCOLOR PACKS

10

Water parks, theme parks, hotels and pool decks are areas where slip resistance is essential. SureTex’s specific aggregate blend and self-bonding properties make it the perfect cementitious overlay for these venues.

SureTexZero VOC – Just add waterSelf Bonding (no primer)

Great for Knockdown or Skip TrowelSpray – Squeegee – Trowel

Coverage RateBase 175 ft² (16.3 m²)Finish 150 ft² (13.9 m²)

RESIDENTIAL NON-SLIP COATINGS

Technical DataCompressive Strength ASTM C-109:28 day 4,250 PSI (29,300 kPa)

SURETEX

Concrete Stencil PatternsHundreds of patterns available. Available in adhesive and non-adhesive.

PIGMENTED SEALERCOLOR PACKS HS 360

11

Restoration of concrete has become increasingly popular with the rise in aggressive freeze/thaw cycles and the use of destructive deicing agents. High bond strength and compressive strength are essential in restoring high traffic areas, and SureBroom is your solution.

Technical DataCompressive Strength ASTM C-109: 7 day 3,750 PSI (25,900 kPa)28 day 6,100 PSI (42,100 kPa)

SureBroomZero VOC – Just add waterSelf Bonding (no primer)

Slip Resistant AggregateSpray – Squeegee – Trowel - Broom

Coverage Rate90 ft² @ 1/16” thickness @ 2 coats(8.4 m² @ 1.6 mm thickness @ 2 coats)

COMMERCIAL NON-SLIP COATINGS

SUREBROOM

Spraying Self-Bonding OverlaysWith a grout sprayer you can apply SureBroom at a rate of 1,000 - 1,200 ft² per hour.

COLOR PACKS PIGMENTED SEALER

12

SureStamp is a single component, stampable cementitious overlay designed to withstand high traffic and freeze/thaw climates. The mix design allows for deeper impressions and more realistic textures without compromising cure time or compressive strength.

SureStamp4,000+ PSI (27,600 kPa)Zero VOC – Just add waterExcellent Bond Strength for Freeze/Thaw

Coverage Rate20 - 24 ft² @ 1/4” (1.9 - 2.2 m² @ 6 mm)15 - 18 ft² @ 3/8” (1.4 - 1.7 m² @ 10 mm)

Secondary ColorantsEco-AccentEco-Stain

Blue Stone Roman Slate Old Granite Cleft

STAMP OVERLAY

SURERELEASELIQUID

SURESTAMPSUREBOND HS 260COLOR PACKS

13

This system turns freshly placed concrete flatwork into an aesthetically pleasing pavement. The concrete is poured, placed, colored and then stamped with a texturing tool. There are a multitude of natural looking choices for interior, exterior, residential and commercial applications. There are NO temperature or freeze/thaw restraints.

Step 1 – Choose Base Coloring SystemIntegral ColorColor Hardener

Step 2 – Secondary ColoringPowder ReleaseEco-StainEco-Accent

Step 3 – Choose Texture150+ stamp tool designs

Ashlar Slate Random StoneEuropean Fan

STAMPED CONCRETE

COLOR HARDENERINTEGRAL COLOR CS 250POWDER RELEASE

OROR

SURERELEASELIQUID

14

SureCrete formulated Wall Spray as a lightweight, sprayable, copolymer based coating for increasing the flexural strength, fire rating, and “R” value of exterior surfaces. In each application, attention is given to the functionality of the surface performance including: moisture migration, flame spread, adhesion, and impact resistance.

Wall SprayZero VOC – Just add waterSelf Bonding (no primer)

35% Recycled AggregateHelps Achieve LEED Points

COMPRESSIVE STRENGTH: ASTM C-10914 day 2,330 PSI (16,100 kPa)28 day 2,870 PSI (19,800 kPa)

FLEXURAL STRENGTH: ASTM C-348-0814 day 720 PSI (5,000 kPa)28 day 950 PSI (6,600 kPa)

TENSILE STRENGTH: ASTM C-190-85 3 day 110 PSI (760 kPa)14 day 140 PSI (970 kPa)28 day 140 PSI (970 kPa)

WIND DRIVEN RAIN TESTPasses ( Wall Spray w/ Elasto-Shield passes after 70 cycles)

VERTICAL CONCRETE COATINGS

WALL SPRAY SUPER WB

FREEZE THAW: ASTM C 6750 Cycles (Passes)

WATER PERMEABILITY: ASTM D2247No Blistering or Cracking

FIRE TESTING: E-84 (Testing on OSB)Class “B” Rating @ 1/8” (0.3 cm) Thick

HUMIDITY CYCLE TEST60F/75% RH - 8 hoursRamp to 120F/50% RH - over 4 hours120F/50% RH - 8 hoursRamp to 60F/75% RH - over 4 hours

COLOR PACKS

15

VERTICAL CARVING & STAMPING

The lightweight mix design of Wall Stamp allows for fantastic bond strength and freeze/thaw climate survivability. Whether you desire to stamp, carve or texture a vertical surface, Wall Stamp is your ideal material.

Wall StampCarvable & Stampable OverlayZero VOC – Just add waterSelf Bonding (no primer)

Single ComponentChange Color w/ Color Packs

Coverage Rate18 ft² @ 3/8” (1.7 m² @ 10 mm)10 ft² @ 1/2” (0.9 m² @ 13 mm)Capable of 4” (10 cm) Build Out

WALL STAMP

COMPRESSIVE STRENGTH: ASTM C-109 7 day 1,750 PSI (12,100 kPa)28 day 2,600 PSI (17,900 kPa)

FLEXURAL STRENGTH: ASTM C-348-08 7 day 620 PSI (4,300 kPa)28 day 1,150 PSI (7,900 kPa)

TENSILE STRENGTH: ASTM C-190-85 7 day 360 PSI (2,500 kPa)28 day 680 PSI (4,700 kPa)

COLOR PACKS SURERELEASELIQUID

ECO-STAIN

16

Surface preparation is the key to a long lasting decorative or restorative concrete project. We offer commercial grade, environmentally friendly solutions for concrete: degreasing, profiling, mastic removal, crack treatment and acrylic sealer stripping.

SURFACE PREPARATION & REPAIR

Elasto-Shield

Elastomeric membrane for crack prevention and blocking

moisture migration.

SCR

3 Products in 1 / Eco-friendly Cleans – Degreases – EtchesRemoves: rust, lime deposits,

mortar, dirt and mild oil.

Flash Patch

Self-bonding, single component cement based

chemical patching compound that delivers high compressive

strength and fast curing; can be feather edged.

Deep Level

Concrete patching product for use in spalls or holes 1 inch or deeper. Does not allow for a

feathered edge.

Scan the QR code to the right using the QR Scanner mobile application to see our Surface Prep & Restoration Products at work

17

RELATED ACCESSORIESCRACK TREATMENT

SCT-22 Epoxy Crack & Spall Kit SureBroom

SURFACE PRODUCTS

EnviroStrip GlueRemove LD1800 FastStrip Plus

RETARDERS & ADHESION

Surface Delay Retarder SurePrime Polymer Concentrate

SLIP RESISTANCE

SureGrip SureGrip Additive / HD Additive SureFinish - Gloss SureFinish - Matte

- 2 Part Urethane- Rapid Set- Low VOC

- Citrus Based- Acrylic Stripper- Degreaser

- Spray-On Retarder - Slows Water Evaporation - Reduces Shrinkage

- Aluminum Oxide- Broadcast

- 2 Part Epoxy- Sand Addition

- Mastic Remover - Water-Based- Softens Glue

- Liquid Retarder - Add to Bag Mix - Change Winter Mix to Summer Mix

- Polypropylene- Blend into Sealer- 300 Micron- 840 Micron (HD)

- Cement Fill- Self-Bonding- Low Shrinkage

- Lithium Densifier- Strengthens Concrete- Slows Efflorescence

- Bonding Agent- Liquid Polymer

- Industrial Strength Sacrificial Coat- Gloss Finish- Can Be Burnished

- Solvent Striper- Removes Heavy Coatings

- Liquid Acrylic- 50% Solids

- Industrial Strength Sacrificial Coat- Matte Finish- Can Be Burnished

Scan the QR code to the right using the QR Scanner mobile application to see our Surface Prep & Restoration Products at work

18

A water-based, penetrating, zero VOC concrete stain which uses the concrete’s porosity level in combination with varying dilution rates and applications to create a modeled or variegated color design. Eco-Stain is available in 29 UV-stable colors and can be used in either interior or exterior applications.

Eco-Stain29 UV Stable Colors1 Gallon & 5 Gallon PailsDilute with Water Zero VOC

USE ONInterior & Exterior ConcreteCementitious OverlaysSelf-Leveling ProductsXtreme Series Castings

ECO-STAIN

Beechnut

Bermuda Blue Blue Ash Burnt Crimson Cool Forest

Flamingo Green Olive Harvest Yellow Kayak

Orange Blossom Pewter Ruby Safari Tan

Thai Green Titanium Grey Walnut White

19

REACTIVE ACID STAIN

Arbor Green Autumn Gold Aztec Gold

Domino Epic Blue Espresso

Fir Green

Kodiak Magnet Navy Blue

Oak Spanish Red

Low residue reactive acid stains are available in 8 standard colors. SureStain is available in 1 gallon containers only.

Spanish Gold Spice Nut Terra Cotta

Black Harvest Gold Mission Brown

Jade Pacific Blue

SureStain8 Reactive Acid Colors1 Gallon Low Residue

20

SureSeal exterior sealers are designed to be “breathable” with excellent bond strength and superior UV resistance while helping to maintain and beautify natural or decorative concrete surfaces.

Super 30600 g/L VOC30% SolidsClear & Color Enhancing5 Gal Pails & 55 Gal Drums Super WB & Low Luster WB100 g/L VOC30% SolidsClear & Color Enhancing5 Gal Pails & 55 Gal Drums

CS 250 & CS 250L25% Solids700 g/L & 400g/L VOCStyrenated Acrylic (Cure & Seal)5 Gal Pails & 55 Gal Drums

Super 20600 g/L VOC20% SolidsClear & Color Enhancing5 Gal Pails & 55 Gal Drums

HS 260 & HS 24020% Solids w/ Premium Acrylics600 g/L & 400 g/L VOCSlows Moisture Migration5 Gal Pails & 55 Gal Drums

HS 360 & HS 34030% Solids w/ Premium Acrylics600 g/L & 400 g/L VOCSlows Moisture Migration5 Gal Pails & 55 Gal Drums

EXTERIOR CLEAR SEALERS

a b d f

a

b

c

d f

e

21

Dura-Kote interior sealers are designed for high traffic areas and provide superior abrasion resistance, color enhancement, and chemical resistance. Choose from high gloss and matte finishes.

Dura-Kote Epoxy 100100% Solids Epoxy0 g/L VOC 100% SolidsHigh Gloss Sheen

Dura-Kote PFC-120Solvent Hybrid Polyaspartic330 g/L VOC 67% SolidsHigh Gloss Sheen

Dura-Kote PolyurethaneSolvent Acrylic Polyurethane435 g/L VOC 51% SolidsHigh Gloss & Satin Sheens

Dura-Kote WB PolyurethaneWater-Based Acrylic Polyurethane72 g/L VOC 57% SolidsGloss & Matte SheensNO AROMA

Dura-Kote PFC-180Solvent Hybrid Polyaspartic200 g/L VOC 80% SolidsHigh Gloss Sheen

INTERIOR CLEAR COATINGS

b d e

a

b

d

e

f

22

Concrete Countertops have been simplified through the use of Hybrid GFRC technology. XS PreCast requires no special training, no steel reinforcement, no expensive vibration tools and can be tinted to virtually any color due to its white cement formulation.

XS PreCast(1) 50 lb Bag(1) Gallon of XS Modifier

XS PreCast Attributes10,400+ Compressive PSI (C170) (71,700+ kPa) 1,450+ Flexural PSI (C880) (10,000+ kPa)20.92 Abrasion Resistance (C1353-96)126 lbs/ft³ Material Density (2,020 kg/m³)

Travertine & Veining

Pressed

XS PRECAST

XS PreCast FeaturesWhite Cement Formulation32 - Standard Base ColorsAdd up to 20% Recycled ContentCovers 10 ft² @ ½” thickness (0.9 m² @ 13 mm) Premixed PVA Fiber Strength

TexturesSolid Color - Stained - Travertine - Veining - Pressed

XS PRECAST XS PRECASTMODIFIER

XS-327COLORANTS:XS COLORS & XS VEINING

23

PRECAST ACCESSORIES

50 FT ROLL EDGE PROFILES

Bullnose Chamfer Eased Square Ogee

STRUCTURAL FIBERS AND RODS

Structural FiberGlass AR Fiber Basalt Fiber 3mm Basalt Rods

COLORANTS

XS VeiningXS Color Packs

ADDITIVES & FILLING

Packing Additive XS Slurry

Desert SandPutty Sand Buff Chocolate Green Slate

Sun Buff

Blue Fog

CharcoalMaple Wood GrayRedwood

FOAM FORMING SYSTEM

4’ Linear Foam Rails Clear Facing Tape Roll Pressure Sensitive Adhesion Tape Roll

SEALERS

XS-327 XS-PC12 SureFinish

- ¾” x 4’ (28 rails / box)- 1” x 4’ (28 rails / box)- 1 ½” x 4’ (16 rails / box)- 2” x 4’ (16 rails / box

- Water-Based- 2 Part 40 oz. Kit- Gloss & Matte Options- Minimal Color Enhancing

- ¾” x 100’ roll- 1” x 100’ roll- 1 ½” x 100’ roll- 2” x 100’ roll

- Solvent-Based- 2 Part Quart Kit- High Gloss- Color Enhancing

- ¾” x 108’ roll (PSA)

- 1 Gallon Container- Gloss & Matte Options

(1 ½” x 50’ Flexible Rolls)

- 32 Standard Colors- 2 packs per 1 gallon XS Modifier

Custom Color Packs

4 ½ oz. Fiberglass Mesh

- Used to create the “pressed” precast design

- White Cement- Accepts Color Packs

24

Glass Fiber Reinforced Concrete or GFRC delivers unparalleled design flexibility along with a limitless variety of colors, textures and shapes. Xtreme Series delivers a hybrid GFRC formula which offers high early strength, lighter weights, wider temperature ranges and sprayable attributes.

XS Backer10,000 PSI (68,900 kPa)Increases Flexural & Tensile StrengthHeavy Glass AR Fiber LoadPre-Blended Formula

Coverage Rate10 ft² @ 1/2” (0.9 m² @ 13 mm)

Use WithXS Precast, XS Face, XS Terrazzo

XS FaceSprayable6 Hour Demold TimeUse with XS Backer Mix

Coverage Rate80 ft² @ 1/16” (7.4 m² @ 1.6 mm)

TexturesSolid ColorSandstone

3/4 Inch Reduction MethodApply “Face Coat” to a thickness of 1/8”- 1/4” (3 - 6 mm). Reinforce the “Face Coat” with XS Backer at a minimum thickness of 1/2” (13 mm).

XS GFRC SYSTEM

XS FACE KIT XS BACKER KIT XS-PC12XS COLOR PACKS

25

THE BIGGEST PARTNERSHIP IN PRECAST

An advanced fiber-reinforced concrete formulated in convenient dual-component packaging. CHENG D-FRC is a versatile system that makes pouring, spraying and even hand-packing concrete an easy to follow, no-fuss process. Create flawless concrete countertops, wall panels, floor tiles, fireplace surrounds and furniture.

A MIX FOR EVERY APPLICATIONCHENG D-FRC is available in three mix types: CASTING, BACKING and FACE Mixes allow for incredible versatility.

POURABLE, SPRAYABLE & PACKABLEComplex designs are a breeze to cast when you have three individual mixes to choose from. Pouring, spraying and hand-packing your concrete projects are all possible with the convenient CHENG D-FRC Mixes.

PRO PERFORMANCE• ASTM C170 Compressive Strength - 10,450 PSI

ASTM C880 Flexural Strength - 1,464 PSI• Reduced Material Needs - Average concrete

countertop and table top thickness is 3/4” Small tiles 1/4”-3/8” thickness. Large tiles and wall panels 3/8”-1/2”

• Flexible Casting Temperatures - 40°-90°F• Convenient Packaging - 50 lb plastic lined

bags• Coverage - 10 ft² at 1/2” thickness

D-FRC KIT XS-327

CHENG SmartColor® PALETTE

XS-PC12

26

Xtreme Series Terrazzo is a hybrid GFRC, dual component, pourable terrazzo concrete bag mix that allows for an extreme load of recycled content - as much as 150%. XS Terrazzo is the strongest cementitious composite in the terrazzo industry.

XS Terrazzo Mix10,000 PSI (68,900 kPa)Up to 150% Recycled Content6 Hour Demold TimePolishable Within 8 Hours

Coverage Rates20 - 26 ft² @ ½” (1.9 - 2.4 m² @ 13 mm)Depends on aggregate load & size

XS TERRAZZO KIT LD1800

XS TERRAZZO

XS COLOR PACKS XS-PC12

27

LIGHTWEIGHT CASTINGS & PANELS

Xtreme Series Lightweight products are used to reduce weight of architectural pieces. These cementitious composite materials have dynamic strength to weight ratios previously unachievable in the concrete industry.

XS Lightweight +32 Component KitSun Buff Base Color / Zero VOC

Material Density = 59.3 lbs/ft³ (950 kg/m³)

XS Lightweight +12 Component KitNatural White Base Color / Zero VOC

Material Density = 70 lbs/ft³ (1,100 kg/m³)

28

SURFACE PREPARATION

SCRPackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 150 ft² (13.9 m²) Uncut (see TDS for dilution rates)Description: Mild acid detergent that etches, cleans and lightly degreases concrete in preparation for overlays and stains (rinse with water, no neutralization).

EnviroStripPackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 150 ft² (13.9 m²) per gallonDescription: Non-flammable, environmentally safe, citrus based stripper for acrylic seals, as well as being a light degreaser.

LD1800Packaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 150 ft² (13.9 m²) per gallon (depending on porosity, see TDS)Description: Helps make concrete stronger and more durable, slows moisture migration and efflorescence.

Elasto-ShieldPackaging: 3.5 gal. (13.2 L) & 5 gal. (18.9 L) pailsCoverage: 300 ft² (27.9 m²) per gallon, per coat (8 mills wet)Description: Ready-to-use waterproofing & crack prevention elastomeric liquid membrane.

GlueRemovePackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 150 ft² (13.9 m²) per gallonDescription: Safe non-flammable, water based carpet glue & mastic remover.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

29

SURFACE PREPARATION

SCT-22Packaging: 22 oz. (650 mL) cartridge (requires gun)Coverage: ¼” (6.4 mm) wide x ¾” (19.1 mm) deep x 17’ (5.2 m) crack (without sand)Description: A rapid set, high strength, ultra-low viscosity urethane concrete crack and spall treatment.

FastStrip PlusPackaging: 5 gal. (18.9 L) pailsCoverage: 150 ft² (13.9 m²) per gallonDescription: Solvent-based stripper for removing heavy coatings and solvent based sealers.

Polymer ConcentratePackaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSolids: 50% Solids Polymer ResinDescription: Liquid acrylic used to increase bonding of an existing concrete surface to a new cementitious overlay.

SCT-EP Epoxy Crack TreatmentPackaging: 3 gal. (11.4 L) kitCoverage: 1/8” (3.2 mm) wide x ¾” (19.1 mm) deep x 600’ (183 m) crackDescription: Two part crack treatment to treat static cracks in concrete or to minimize their return in active, structural cracks.

SurePrimePackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 400 - 500 ft² (37.2 - 46.5 m²) per gallonDescription: Liquid acrylic polymer that enhances the bonding of cementitious products for both vertical and horizontal concrete, cement board, drywall, and other construction materials.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

30

STAMPING CONCRETE

Integral ColorPackaging: 10 lb. (4.5 kg) water-soluble bagsColors: 18 standard colors made from 6 stock color bagsCoverage: See Color ChartDescription: Iron oxide pigments used to integrally color freshly poured concrete. Packaged in biodegradable bags for ready-mix trucks.

Color HardenerPackaging: 60 lb. (27.2 kg) pails or bagsColors: 30 standardCoverage: 100 ft² (9.3 m²) per pail (varies based on color, see TDS)Description: Pre-mixed, dry-shake pigment for coloring and hardening freshly poured concrete. Specially formulated to allow for faster application.

Powder ReleasePackaging: 30 lb. (13.6 kg) pailsColors: 18 standardCoverage: 750 - 1,000 ft² (65 - 93 m²) per pailDescription: Powder releasing agent and secondary coloring system integrated with iron oxide pigments to color concrete and release stamping tools from concrete.

SureRelease LiquidPackaging: 5 gal. (18.9 L) pails & 55 gal. (208.2 L) drumsCoverage: 250 - 500 ft² (23.2 - 46.5 m²) per gallon, per coatDescription: Used to release any decorative imprinting tool from concrete or overlay.

Eco-AccentPackaging: 5 lb. (2.3 kg) pailsColors: 10 standardCoverage: 3,000 - 5,000 ft² (279 - 465 m²) per pail (varies by color & application, see TDS)Description: Zero VOC, water based, UV-Stable secondary coloring agent for both new and existing stamped or textured concrete surfaces.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

31

STAMPING CONCRETE

Surface DelayPackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 200 - 400 ft² (18.6 - 37.2 m²) per gallon, diluted (see TDS)Description: Delays the initial evaporation of water from overlays/slabs.

Translucent HighlightingPackaging: 5 gal. (18.9 L) pailsColors: 6 standardCoverage: 150 - 175 ft² (13.9 - 16.3 m²) per gallonDescription: Solvent based “antiquing” or secondary coloring system for stamp overlay and stamped concrete. Can be applied over an existing acrylic sealed surface.

XylenePackaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsCoverage: N/ADescription: Solvent cleaning agent commonly used to clean up spills, over-spray, and contaminated tools.

Aromatic 100 SolventsPackaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsCoverage: N/ADescription: A slower evaporating solvent cleaning agent commonly used to clean up spills, over-spray, and contaminated tools.

SOLVENTS

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

32

NON-SLIP

SureFinish - GlossPackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 1,500 ft² (139 m²) per gallon first coat; subsequent coatings 2,000-3,000 ft² (186 - 279 m²) per gallonDescription: “Mop-on” industrial protective acrylic floor finish.

SureGripPackaging: 1 qt. (946 mL) containersCoverage: 200 ft² (18.6 m²) per quartDescription: Premium grade (toss-on), aluminum oxide for broadcasting a slip resistance product between coats for sealers & coatings.

SureGrip AdditivePackaging: 1 qt. (946 mL) containersCoverage: Add 1 quart per 5 gallon pail of acrylic sealerAggregate Size: 300 micronsDescription: Premium grade, polypropylene additive, is a slip resistance product for resin based sealers.

SureFinish - MattePackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 1,500 ft² (139 m²) per gallon first coat; subsequent coatings 2,000-3,000 ft² (186 - 279 m²) per gallonDescription: “Mop-on” industrial protective acrylic floor finish.

SureGrip Additive HDPackaging: 1 qt. (946 mL) containers & 5 gal. (18.9 L) pailsCoverage: 1 quart per 5 gallon pail of acrylic sealerAggregate Size: 840 micronsDescription: Premium grade polypropylene with an 840 micron or 20 mesh resistance, will not crush.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

33

COLORANTS

Color PacksPackaging: pre-measured bagColors: 30 standardCoverage: 1 color pack per bag overlay mix; 2 per XS PreCast ModifierDescription: Pre-measured integral coloring for SureCrete’s white cement-based overlay and XS mixes.

Color Packs - CustomPackaging: pre-measured bagCoverage: 1 color pack per bag overlay mix; 2 per XS PreCast ModifierDescription: We can create non-standard colors and turn them into a dry pigment that can go into either white or gray Portland cement bag mixes.

Eco-AccentPackaging: 5 lb. (2.3 kg) pailsColors: 10 standardCoverage: 3,000 - 5,000 ft² (279 - 465 m²) per pail (varies by color & application, see TDS)Description: Zero VOC, water based, UV-Stable secondary coloring agent for both new and existing stamped or textured concrete surfaces.

Scan with QR Reader

XS VeiningPackaging: 1 qt. (946 mL) containersColors: 10 standardCoverage: Varies depending on applicationDescription: Used to create the Veining Technique with XS mixes.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

SureStainPackaging: 1 gal. (3.8 L) pailsColors: 8 standardCoverage: 200 ft² (18.6 m²) per gallon (uncut)Description: Reactive acid concrete stain for creating very specific “earth-tone” designs.

Scan with QR Reader

34

COLORANTS

Eco-StainPackaging: 1 qt. (946 mL) jars (select colors), 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsColors: 29 standardCoverage: 200 ft² (18.6 m²) per gallon (uncut, see TDS for dilution rates)Description: Zero VOC water based penetrating concrete stain (no neutralization or cleanup required). Slab needs porosity for penetration.

Dura-Kote FlakesPackaging: 25 lb. (11.3 kg) bagsColors: 12 pre-blended, multi-colored designsCoverage: Full Broadcast = 6 - 10 ft² (0.56 - 0.93 m²) per 1 lb. (0.45 kg) of Flake Description: ¼” (6.4 mm) random shaped colored polymer chips that are broadcasted into a wet epoxy, delivering a vibrant, multihued, slip resistant, seamless floor.

Scan with QR Reader

Dura-Kote MetallicsPackaging: 16 oz. (473 mL) jars Colors: 20 standardCoverage: 1 jar to 3 gallons of Epoxy 100 Clear Coat Description: Reflective mica pearls that are suspended into an Epoxy 100 % solids to create a unique three dimensional appearance.

Scan with QR Reader

EcoPrimePackaging: 1 gal. (3.8 L) & 5 gal. (18.9 L) pailsCoverage: 200 - 300 ft² (18.6 - 27.9 m²) per gallon, per coat (diluted 4:1 with water)Description: Reduces porosity of excessively porous concrete, thus regulating the penetration rate of Eco-Stain.

Scan with QR Reader

Scan with QR Reader

35

BAG MIX - OVERLAYS & PATCHING

Micro ToppingCoverage: 40 lb. (18.1 kg) bag per 200 - 300 ft² (18.6 - 27.9 m²)Water: Add 5 - 6 quarts (4.7 - 5.7 L) of water per 50 lb. bagDescription: Self bonding, extremely thin, troweled on overlay, used to create a blank canvas for staining or a tight-troweled finish; accepts color packs.Base Color: Gray & White

Deep LevelCoverage: 50 lb. (22.7 kg) bag covers 12 ft² (1.1 m²) @ ½” (13 mm) thicknessWater: Add 4 quarts (3.8 L) water per 50 lb. bag (SureBond required)Description: Concrete patching product for use in spalls or holes 1 inch or deeper. Does not allow for a feathered edge; accepts color packs.Base Color: Gray

SureSprayCoverage: 50 lb. (22.7 kg) bag per 80 - 175 ft² (7.4 - 16.3 m²)Water: Add 4½ - 6½ quarts (4.3 - 6.2 L) water per 50 lb. bag Description: Self-bonding, trowelable and sprayable thin overlay for use on concrete slabs. Typical textures include orange peel, bubble, knock down and slop trowel; accepts color packs.Base Color: White

SureTexCoverage: 50 lb. (22.7 kg) bag per 150 - 175 ft² (13.9 - 16.3 m²)Water: Add 4½ - 6½ quarts (4.3 - 6.2 L) water per 50 lb. bag Description: Self bonding, trowelable and sprayable thin overlay for use on concrete slabs when creating a knockdown finish (slightly larger aggregate than SureSpray); accepts color packs.Base Color: White

Flash PatchPackaging: 20 lb. (9.1 kg) pails & 50 lb. (22.7 kg) bagsWater: Add 4 - 4½ quarts (3.8 - 4.3 L) of water per 50 lb. bagCoverage: 50 lb. bag covers 0.45 ft³ (0.03 m³) or 12 ft² (1.1 m²) @ ½” (13 mm) depthDescription: Self-bonding, single component cement based chemical patching compound that delivers high compressive strength and fast curing properties.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

36

BAG MIX - OVERLAYS & PATCHING

SureBroomCoverage: 50 lb. (22.7 kg) bag covers 160 ft² (14.9 m²) @ 1/32” (0.8 mm) thickness (2 coats recommended)Water: Add 7 - 8 quarts (6.6 - 7.6 L) water per 50 lb. bagDescription: Self-bonding, extremely durable thin concrete overlay for recreating freshly broomed concrete. Can be troweled or sprayed; accepts color packs.Base Color: Gray & White

Scan with QR Reader

SureStampCoverage: 50 lb. (22.7 kg) bag covers 15 -18 ft² (1.4 - 1.7 m²) @ 3/8” (9.5 mm)or 20 - 24 ft² (1.9 - 2.2 m²) @ ¼” (6.4 mm)Water: Add 3½ - 4 quarts (3.3 - 3.8 L) water per 50 lb. bag (SureBond required)Description: Stampable overlay product for use on concrete slabs; accepts color packs.Base Color: White

Wall SprayCoverage: 40 lb. (18.1 kg) bag covers 28 - 30 ft² (1.9 - 2 m²) @ ¼” (6.4 mm)Water: Add 3½ - 4 quarts (3.3 - 3.8 L) water per 40 lb. bagDescription: Self-bonding, lightweight, cement-based overlay for vertical surfaces containing 35% post-consumer recycled aggregate. When applied to EPS foam, it will dramatically increase flexural and tensile strength. Product can be troweled or sprayed. Base Color: White

Wall StampCoverage: 40 lb. (18.1 kg) bag covers 18 ft² (1.7 m²) @ 3/8” (9.5 mm)Water: Add 5 - 6 quarts (4.7 - 5.7 L) water per 40 lb. bagDescription: Self-bonding, lightweight carvable and stampable overlay for vertical surfaces; accepts color packs.Base Color: Light Gray

RetarderPackaging: 1 gal. (3.8 L) pailsCoverage: Per Bag: SureStamp - 3 oz. (89 mL) / SureSpray - 8 oz. (237 mL) / SureTex - 7 oz. (207 mL)Description: Water-borne retarder designed to slow SureCrete’s overlay products set time. Coverage ratios will turn SureCrete’s “Winter” mixes into “Summer” mixes.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

37

ACRYLIC SEALERS

CS 250 (Cure & Seal)Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: Gloss (color enhancing)Coverage: 300 - 500 ft² (27.9 - 46.5 m²) per gallon, per coat Description: Clear, 25% solids, solvent styrene acrylic finishing membrane that enhances the curing process of freshly poured concrete. Helpful in preventing dusting, spalling, moisture and chemical migration. Also resists deicing salts and many chemicals.

CS 250L (Cure & Seal)Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: Gloss (color enhancing)Coverage: 300 - 500 ft² (27.9 - 46.5 m²) per gallon, per coat Description: VOC compliant (400 g/L), clear 25% solids, styrene acrylic finishing membrane that enhances the curing process of freshly poured concrete. Helpful in preventing dusting, spalling, moisture and chemical migration, resists deicing salts.

Super 30Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: High GlossCoverage: 180 - 200 ft² (16.7 - 18.6 m²) per gallon, per coat Description: Solvent-based, 600 g/L VOC, 30% solids, clear acrylic sealer for vertical & flat concrete surfaces, concrete overlays and many other cementitious surfaces.

Super 20Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: High GlossCoverage: 180 - 200 ft² (16.7 - 18.6 m²) per gallon, per coat Description: Solvent-based, 600 g/L VOC, 20% solids, clear acrylic sealer for vertical & flat concrete surfaces, concrete overlays and many other cementitious surfaces.

Super WBPackaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: Gloss & Low LusterCoverage: 180 - 200 ft² (16.7 - 18.6 m²) per gallon, per coat Description: Water-based, low VOC (<100 g/L), 30% solids, clear acrylic sealer for vertical & flat concrete surfaces, concrete overlays and many other cementitious surfaces.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

38

ACRYLIC SEALERS

Pigmented Solvent-Based AcrylicPackaging: 1 gal. (3.8 L) pails, 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: SatinColors: 30 Standard / 228 Coverage: 160 - 200 ft² (16.7 - 18.6 m²) per gallon, per coat Description: Solvent-based, 600 g/L VOC, 30% solids, pigmented acrylic sealer; the first with pigments specifically formulated for superior UV stability on cementitious surfaces.

HS 360Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: GlossCoverage: 200 - 240 ft² (18.6 - 22.3 m²) per gallon, per coat Description: Solvent-based, 600 g/L VOC, 30% solids, “premium acrylic” sealer that delivers slower evaporating solvents, deeper penetration and bonding to the concrete and helps to slow moisture migration and efflorescence.

HS 240Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: Gloss & MatteCoverage: 200 - 240 ft² (18.6 - 22.3 m²) per gallon, per coat Description: Solvent-based, 400 g/L VOC, 20% solids, “premium acrylic” sealer that delivers slower evaporating solvents, deeper penetration and bonding to the concrete and helps to slow moisture migration and efflorescence.

HS 340Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: GlossCoverage: 200 - 240 ft² (18.6 - 22.3 m²) per gallon, per coat Description: Solvent-based, 400 g/L VOC, 30% solids, “premium acrylic” sealer that delivers slower evaporating solvents, deeper penetration and bonding to the concrete and helps to slow moisture migration and efflorescence.

HS 260Packaging: 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: GlossCoverage: 200 - 240 ft² (18.6 - 22.3 m²) per gallon, per coat Description: Solvent-based, 600 g/L VOC, 20% solids, “premium acrylic” sealer that delivers slower evaporating solvents, deeper penetration and bonding to the concrete and helps to slow moisture migration and efflorescence.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

ON DEMAND COATINGS

39

ACRYLIC SEALERS

Dura-Kote Solvent PolyurethanePackaging: 2 gal. (7.6 L) & 5 gal. (18.9 L) kitsSheen: High Gloss & SatinCoverage: 300 ft² (27.9 m²) per gallon, per coat Mix Ratio: 4:1 (A:B)Description: 51% solids, dual-component, solvent acrylic polyurethane that enhances color while providing excellent abrasion and chemical resistance to interior concrete.

Dura-Kote Water-Based PolyurethanePackaging: 2 gal. (7.6 L) & 4 gal. (15.1 L) kitsSheen: Gloss & MatteCoverage: 400 ft² (37.2 m²) per gallon, per coat Mix Ratio: 3:1 (A:B)Description: 57% solids, dual-component, water-based polyurethane delivering: superior bond strength, chemical resistance, zero aroma, and anti-graffiti properties.

Pigmented Water-Based AcrylicPackaging: 1 gal. (3.8 L) pails, 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: SatinColors: 30 Standard / 228Coverage: 160 - 200 ft² per gallon, per coat Description: Water-based, 100 g/L VOC, 30% solids, pigmented acrylic sealer; the first with pigments specifically formulated for superior UV stability on cementitious surfaces.

Pigmented Solvent-Based Low VOC AcrylicPackaging: 1 gal. (3.8 L) pails, 5 gal. (18.9 L) pails & 55 gal. (208 L) drumsSheen: SatinColors: 30 Standard / 228 ON DEMAND COATINGSCoverage: 160 - 200 ft² per gallon, per coat Description: Solvent-based, 400 g/L VOC, 30% solids, pigmented acrylic sealer; the first with pigments specifically formulated for superior UV stability on cementitious surfaces.

HIGH PERFORMANCE COATINGS

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

ON DEMAND COATINGS

40

HIGH PERFORMANCE COATINGS

PFC-180Packaging: 2 gal. (7.6 L), 4 gal. (15.1 L) kits & 20 gal. (75.7 L) kitsSheen: High GlossCoverage: 150 - 200 ft² (13.9 - 18.6 m²) per gallon, per coat Mix Ratio: 3:1 (A:B)Description: 80% solids, dual component, thicker build hybrid solvent polyaspartic. It is UV-stable, has excellent chemical and abrasion resistance, and is set to touch in 4 hours.

PFC-120Packaging: 2 gal. (7.6 L) & 5 gal. (18.9 L) kitsSheen: High GlossCoverage: 300 - 400 ft² (27.9 - 37.2 m²) per gallon, per coat Mix Ratio: 4:1 (A:B)Description: 67% solids, dual component, hybrid solvent polyaspartic. This coating is UV-stable, has excellent chemical and abrasion resistance, and is set to touch in 2 hours.

Dura-Kote Pigmented WB EpoxyPackaging: 2 gal. (7.6 L) & 5 gal. (18.9 L) kitsSheen: GlossColors: 30 Standard / 228 ON DEMAND COATINGSCoverage: 125 - 250 ft² (11.6 - 16.3 m²) per gallon, per coat Mix Ratio: 4:1 (A:B)Solids: 52% solids

Scan with QR Reader

Dura-Kote Epoxy 100Packaging: 3 gal. (11.4 L), 15 gal. (56.8 L) & 150 gal. (568 L) kitsSheen: High GlossCoverage: 40 - 150 ft² (3.7 - 13.9 m²) per gallon, per coat Mix Ratio: 2:1 (A:B)Description: 100% solids, dual-component high build coating used with the Metallic system or as a clear coat. Ideal for commercial traffic, abrasion and chemical resistance.

Scan with QR Reader

Scan with QR Reader

Scan with QR Reader

Dura-Kote Pigmented Epoxy 100Packaging: 3 gal. (11.4 L), 15 gal. (56.8 L) & 150 gal. (568 L) kitsSheen: High GlossColors: 30 Standard / 228 ON DEMAND COATINGSCoverage: 40 - 150 ft² (3.7 - 13.9 m²) per gallon, per coat Mix Ratio: 2:1 (A:B)Solids: 100% solids

Scan with QR Reader

41

XTREME SERIES

XS BackerPackaging: 50 lb. (22.7 kg) bag & 1 gal. (3.8 L) XS PreCast ModifierCoverage: 10 ft² (0.9 m²) @ ½” (13 mm) thickness Water Addition: Up to 40 oz. (1.2 L)Description: Glass AR Fiber rich, hybrid GFRC, cement based reinforcement for use with all other XS bag mixes. Aids in faster de-mold times, higher flexural & tensile strength in castings.

Scan with QR Reader

XS FacePackaging: 50 lb. (22.7 kg) bag & 1 gal. (3.8 L) XS PreCast ModifierCoverage: 80 ft² (7.4 m²) @ 1/16” (1.6 mm) thickness Water Addition: Up to 16 oz. (473 mL)Description: Sprayable face coating designed to be used in conjunction with XS Backer. This system delivers high early strength, lighter weight casting, and better solid color.

Scan with QR Reader

XS PreCastPackaging: 50 lb. (22.7 kg) bag & 1 gal. (3.8 L) XS PreCast ModifierCoverage: 10 ft² (0.9 m²) @ ½” (13 mm) thickness Water Addition: Up to 16 oz. (473 mL)Description: Pourable, PVA fiber mix design providing high early strength, superior de-mold times and can create solid color, veining, travertine and pressed textures.

Scan with QR Reader

XS TerrazzoPackaging: 50 lb. (22.7 kg) bag & 2 gal. (7.6 L) XS PreCast ModifierCoverage: 20 - 26 ft² (1.9 - 2.4 m²) @ ½” (13 mm) thickness (depends on aggregate size, see TDS)Water Addition: Up to 40 oz. (1.2 L)Description: Pourable, cement based terrazzo formula that allows for the addition of 50 - 80 lb.’s of recycled aggregate to create an elegant polishable surface.

Scan with QR Reader

XS Lightweight Plus 1Packaging: 35 lb. (15.9 kg) bag & 1 gal. (3.8 L) XS Lightweight Plus ModifierCoverage: 12 ft² (1.1 m²) @ ½” (13 mm) thickness / 0.5 ft³ (0.01 m³)Water Addition: Up to 64 oz. (1.9 L)Description: 50% lighter than concrete, architectural casting material with fire resistant properties.

Scan with QR Reader

42

XTREME SERIES

XS Packing AdditivePackaging: 1 qt. (946 mL) containersCoverage: 4 oz. (118 mL) per XS PreCast or XS FaceDescription: A thickening agent designed for the XS mixes. Allows for the creation of the “Pressed” texture technique.

Scan with QR Reader

XS Lightweight Plus 3Packaging: 35 lb. (15.9 kg) bag & 1 gal. (3.8 L) XS Lightweight Plus ModifierCoverage: 14 ft² (1.3 m²) @ ½” (13 mm) thickness / .59 ft³ (0.02 m³)Water Addition: Up to 1 gal. (3.8 L)Description: 60% lighter than concrete, architectural casting material with fire resistant properties.

Scan with QR Reader

XS Precast Modifier ConcentratePackaging: 5 gal. (18.9 L) pails, 55 gal. (208 L) drums & 275 gal. (1,041 L) totesCoverage: VariesMix Ratio: See TDSDescription: Concentrated version of XS PreCast Modifier - can be used for XS PreCast, XS Face, XS Backer and XS Terrazzo.

Scan with QR Reader

XS SlurryPackaging: 5 lb. (2.3 kg) pailsCoverage: VariableDescription: Quickly fills pinholes in precast concrete. White formula allows for it to be colored via concentrated color or color packs.Water: Up to 1½ qt. (1.4 L) per 5 lb. pail

Scan with QR Reader

XTREME SERIES ACCESSORIES

43

XTREME SERIES ACCESSORIES

XS-327Packaging: 40 oz. (1.2 L) kitsSheen: Gloss & MatteCoverage: 100 - 700 ft² (9.3 - 65 m²) per kit, per coat (see TDS for dilution rates)Mix Ratio: 3:2 (A:B)Description: Low VOC (25 g/L), food safe, two component, minimal color enhancement, film forming hybrid water-based polyurethane for concrete & natural stone surfaces.

XS-PC12Packaging: 1 qt. (946 mL) kitsSheen: High GlossCoverage: 100 ft² (9.3 m²) per quart, per coat Mix Ratio: 3:1 (A:B)Description: Low VOC (400g/L), food safe, dual-component, color enhancing, penetrating, film forming solvent polyurea coating delivering a mirrored finish for concrete & stone.

Scan with QR Reader

Scan with QR ReaderCountertop Edge ProfilesLength: 50 ft. (15.2 m) rollsProfiles: Bullnose, Chamfer, Eased Square, OgeeDepth: 1½” (38 mm)Description: Fast, easy to use, cut with a razor knife, bendable edge profile system for precast and pour-in-place concrete castings.

Scan with QR Reader

XS Foam RailsLength: 4 ft. (1.2 m) sticksProfiles: ¾” (19 mm), 1” (25 mm), 1½” (38 mm) & 2” (51 mm) optionsDescription: Fast, square edged, high density foam forming system that allows for the fastest setup of template.

Scan with QR Reader

XS Facing TapesLength: 100 ft. (30.5 m) rollsProfiles: ¾” (19 mm), 1” (25 mm), 1½” (38 mm) & 2” (51 mm) optionsDescription: Thick mil, clear facing tape delivers a smooth square profile edge when placed onto foam, wood, melamine, and many other casting surfaces.

Scan with QR Reader

44

XTREME SERIES ACCESSORIES

Basalt Structural RodsLength: 5 ft. (1.5 m) & 10 ft. (3 m) rodsSizes: 1/8” (3 mm), ¼” (6 mm), 5/16” (8 mm), 3/8” (10 mm) & ½” (12 mm) optionsDescription: 100% corrosion proof, 100% alkaline proof, non-conductive, heat resistant, hydrophilic non-absorbent, certified Basalt Pure rods designed to replace steel rebar in concrete.

Scan with QR Reader

Basalt FibersLength: 6 lb. (2.7 kg) & 50 lb. (22.7 kg) bagsSizes: ½” (13 mm), 1” (25 mm) & 2” (51 mm) optionsDescription: 100% corrosion proof, 100% alkaline proof, non-conductive, heat resistant, hydrophilic non-absorbent, certified Basalt Pure fibers designed to work in precast, fresh-pour, and other concrete mixes.

Scan with QR Reader

Glass AR FibersLength: 6 lb. (2.7 kg) & 50 lb. (22.7 kg) bagsSizes: ½” (13 mm), 1” (25 mm) & 2” (51 mm) optionsDescription: 100% corrosion proof, 100% alkaline proof, non-conductive, heat resistant, hydrophilic non-absorbent, certified Basalt Pure fibers designed to work in precast, fresh-pour, and other concrete mixes.

Scan with QR Reader

PSA TapeLength: 100 ft. (30.5 m) rollsProfiles: 1” (25 mm)Description: Double-sided pressure sensitive adhesive tape designed to hold the XS foam rails to typical casting surfaces. It’s high bond strength eliminates blowouts and aids in the industry’s fastest concrete forming system.

Scan with QR Reader

45

XS-327 SEALER DILUTION RATES

# Bags ft² @ 1/8” ft² @ 1/4” ft² @ 3/8” ft² @ 1/2” ft² @ 3/4” ft² @ 1” ft² @ 1.5” ft² @ 2”

1 40 20 13 10 6.5 5 3.25 2.75

2 80 40 26 20 13 10 6.5 5.5

3 120 60 39 30 19.5 15 9.75 8.25

4 160 80 52 40 26 20 13 11

5 200 100 65 50 32.5 25 16.25 13.75

6 240 120 78 60 39 30 19.5 16.5

7 280 140 91 70 45.5 35 22.75 19.25

8 320 160 104 80 52 40 26 22

9 360 180 117 90 58.5 45 29.25 24.75

10 400 200 130 100 65 50 32.5 27.5

11 440 220 143 110 71.5 55 35.75 30.25

12 480 240 156 120 78 60 39 33

13 520 260 169 130 84.5 65 42.25 35.75

14 560 280 182 140 91 70 45.5 38.5

15 600 300 195 150 97.5 75 48.75 41.25

XS BAG MIX MATRIX

1:1 2:1 3:1 4:1 5:1 6:1 7:1

• Kitchens,• Bars,• Sinks,• Floor Tiles,• Wet Areas,• Showers

Rolled Application* Rolled Application* Rolled or Burnished Application*

• Bath Vanities• Hearths• Mantles• Floors

• Wall Panels**

** Acts more as a treatmentinstead of a sealer at this dilution rate

Protection Level (after 7:1 prime coat)

* See TDS for application methods

* All dilution rates should be practiced before final application

46

INTEGRAL COLOR CHART

Used With: 5 Sack Mix, 5.5 Sack Mix, 6 Sack Mix

Note: The color of raw materials, or a sample strip, is subject to variation from the color chip reproduced above. Colors above are as accurate as can be produced using finest materials of reproduction. Job site variations from the above color may occur due to differences in local raw materials and methods of application. Before final color selection is made, a job site panel should be produced and approved.

Caramel BuffLight

1 Bag / 2 Yards Caramel BuffMedium

1 Bag / 1 Yard Caramel BuffDark

1.5 Bags / 1 Yard

WatermelonLight

1 Bag / 2 Yards WatermelonMedium

1 Bag / 1 Yard WatermelonDark

2 Bags / 1 Yard

Red BarnLight

1 Bag / 2 Yards Red BarnMedium

1 Bag / 1 Yard Red BarnDark

2 Bags / 1 Yard

ChestnutLight

1 Bag / 2 Yards ChestnutMedium

1 Bag / 1 Yard ChestnutDark

2 Bags / 1 Yard

ChocolateLight

1 Bag / 2 Yards ChocolateMedium

1 Bag / 1 Yard ChocolateDark

2 Bags / 1 Yard

Gun MetalLight

1 Bag / 2 Yards Gun MetalMedium

1 Bag / 1 Yard Gun MetalDark

2 Bags / 1 Yard

47

MAIN COLOR CHART

Note: All colors shown are intended to show the approximate color of finish, choices , and ranges. Colors are achieved after 2 coats of a penetrating clear sealer. DO NOT use this chart as a final selection. Colors are affected by site conditions and installation procedure. SureCrete recommends making final selections from job specific samples made in the field.

Color Packs can be used with SureStamp, SureSpray, SureTex, SureBroom, Micro Topping and the XS bag mixes. This color chart is not for Ready Mix or integral color use for concrete.

* These colors are available for use in our XS Veining product line+ These colors are for pigmented sealer in range Special Color 1, and have a higher cost

NATURAL WHITE

LIMESTONE

MINT

GREEN SLATE*+

BLUE FOG*+

CORAL

TERRA COTTA

OLD BRICK

TILE RED

REDWOOD*

DESERT SAND*

PUTTY*

SAND BUFF*

SMOKE

TAUPE

CARIBBEAN CREAM

IVORY

ANTIQUE WHITE

SUN BUFF*

ALMOND

SPICE

MAPLE WOOD*+

BROWN DERBY

CHOCOLATE*

DARK WALNUT

DOVE GRAY CONCRETE GRAY SILVER GRAY*

CHARCOAL*

SureCreteDesign.com15246 Citrus Country Drive, Dade City, Florida, USA 33523

1.800.544.8488 1.352.567.7973