DCM Aerospace - Tooling & GSE Catalogue 2016

Copyright 2016, DCM Aerospace, All Rights reserved 1

890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2 Phone: +1-450-435-9210 E-Mail: [email protected]



Index

Aircraft Maintenance Tooling and GSE DCM Aerospace is a global aerospace Integrator with a manufacturing facility in Canada. With state-of-the-art integrated software, DCM Aerospace designs, develops and manufactures critical and high performance aerospace structural components as well as high lev-el equipments that includes special engine stands and engine removal systems, wing and landing gear components, and related tooling that meets the stringent requirements of the aerospace industry. Authorized manufacturer for Bombardier Aerospace and licensed by Boeing Commercial Airplanes for proprietary aircraft Maintenance tooling & GSE used on CRJ Series Aircraft, Q-Series turboprops, business aircraft, amphibious aircraft, all Airbus, Boeing, Douglas, Embraer Phenom 300 and holds various approvals for manufacturing aircraft parts and sub-assemblies.

PRODUCT Page PRODUCT Page

TIME LIMITS & MAINTENANCE CHECKS (ATA-5) Loop Resistance tester & Loop Controller 5 Air Flow Cup 7

SERVICING (ATA-12) Lavatory & Potable Water 25 Nitrogen & Oxygen 25 NATO Cases 26

LIFTING & SHORING (ATA-7) Adapters , Jacking Pad aircraft 8 Aircraft Jacking Equipment 9 Axle Jack 10 Tripod Jack & Safety Tail 12

STANDARD PRACTICES AIRFRAME (ATA-20) Grommet & O Ring Installation Tool 27 Cutting Tool 27 Swaging Tool Kit 27 Digital Protractor 28 Gaseous Test Panel 28 I/R of NAS5454 Tab Washer and Hardware 29 Boom Hoist - 400 Lbs Capacity 30

LEVELING (ATA-8) Plumb Bob Kit 17 Leveling - High Precision 17 Weighting Load Cells Kit 18

AIR CONDITIONING (ATA-21) Lock Hold Open Outflow Valve 31 Test Set - Outflow Valve altitude limiter 31

TOWING & TAXIING (ATA-9) Tow Bar 19 Airplane Recovery 21

AUTOFLIGHT (ATA-22) Various Test box 32

PARKING & MOORING (ATA-10) Wheel Chocks 21 Pole Removal / Installation Tool Static Probe Cover 22 Streamers 22 Mooring Equipment 23 Plugs & Covers 23 Pin, Lock Landing Gear 24

COMMUNICATION (ATA-23) Various Breakout box 32 ELECTRICAL POWER (ATA-24) Removal & Installation IDG 32 IDG Filling Unit 32



Index PRODUCT Page PRODUCT Page

FIRE PROTECTION (ATA-26) Test Equipment - Fire Extinguishing System 33 Extender Card Set 33

PNEUMATIC (ATA-36) Precooler Equipment. - Removal / installation 45

FLIGHT CONTROLS (ATA-27) Various Rigging Equipments 34

WATER WASTE (ATA-38) Vacuum Waste system 46 Vacuum Toilet - Blockage Removal Tool 46 Drain Mast Plug - Water Waste 46 Test Cable - Potable Water Quantity Transmitter 46 Vacuum Lavatory system - Blockage Removal Tool 47 Vacuum Waste System - Blockage Removal Tool 47

FUEL (ATA-28) Test Equipment - Leak & Pressure APU Fuel Line shroud 34 SpannerWrench - Fuel Sump Drain Valve 34 Adapters—Sump Drain Valve Removal / Installation 34 Tool fuel Drain Valve Removal 34 Fuel Sampling Equipment 35 Fuel Tank Venting Equipment 36

AIRBORNE AUXILIARY POWER (ATA-49) Cradle APU & Hoist Equipments (Removal & Inst’l) 48 Lifting Eye - Generator & Starters 49 Thread Protectors - APU 49

HYDRAULIC POWER (ATA-29) Drain Kit—Hydraulic System 37 Tool set—Hydraulic Filter Overhaul 37 Cable Ass’y—Hydraulic Leakage Check 37 Hydraulic Ground Service Coupling 37 Removal / Installation equipment—Ram Air Turbine 38

DOORS (ATA-52) Door Seal Installation Tool 50 Various Tools (See Aircraft Specific ITEM)

Landing Gear (ATA-32) Brake Adjustment pressure - Bleed / Test Unit 39 Thread & Axle Protector 40 Inflation Tool - Deflation Tool (Tire & Strut) 41 Brake Bleed Hose Kit 41 Dolly MLG / NLG 42 Wheel & Brake Dolly 42

NACELLES (ATA-54) Sling Equipment 51

LIGHTS (ATA-33) Landing Light Adjustment Tool 43

STABILIZER (ATA-55) Sling Equipment 52

NAVIGATION (ATA-34) Breakout Box Equipment - ARINC 600 Line Maint. 44 Extender Box - Radio altimeter Receiver Transmitter 44

WINDOWS (ATA-56) Sling Equipment - Removal Equipment 53



Index PRODUCT Page PRODUCT Page

WINGS (ATA-57) Contour Board 54 Flap Profile Check Board 54 Wing Leading Edge & Winglets 54

EXHAUST (ATA-78) Hand Pump - Opening System Thrust Reverser 63 Hold Open Equipment - Thrust Reverser 64

PROPELLERS (ATA-61) Blade Lifter 55 Transport and Storage Dolly 55

STARTING (ATA-80) Air Start Adapter 65

POWER PLANT (ATA-71) Engine Lifting Sling 56 Bootstrap Lifting Device - Engine 57 Engine Crane - Installation & Removal 58 Engine Stand & Engine Cradle 59 Lift Fixture Engine Accessory 61 Dynamometer Load Cell 62

Bombardier Aerospace Airframe Tooling & GSE 64 CSeries Tooling List - License 65 Dash-8 Q400 Tooling List - License 67 Embraer Phenom 300 Tooling List - License 71 Boeing Commercial Airplane GSE - License 72 Boeing 737MAX Tooling list - License 73 Boeing 787 Tooling List - License 75

ENGINE RECIPROCATING (ATA-72) Engine Rotation Tool 62

WARRANTY 85

Some of the GSE are manufactured as per appropriate directives including its amendments. EC Declaration of conformity are supplied with the tools.

NIST TRACEABLE All GSE that requires a gauge comes with NIST Certification & Calibration Data. Re-calibration of these Equipment is done by DCM.



TIME LIMITS (ATA-5)

LOOP RESISTANCE TESTER

Standard Features: Automatic measurement range control Insensitive to loop inductance Portable, battery-powered operation (approx. 8 hours) RS-232 port to support remote data recording Measures stray current in the loop High-performance battery charger Note: Features and specifications are subject to change without notice.

Specifications: —————————————————————————————————————— Model Number Size & weight Use On Aircraft Model —————————————————————————————————————— 906-10246-3 78 Lbs; 737, 777, 787, Dash-8 24” x 24” x 48” Contains: (1) LRT (906-10247-3) (1) Accessory Kit (906-10271-3); which includes a battery charger, RS-232 Cable, spare probe tips and fuses. This unit is CE Certified but not ATEX Certified. ================================================================================ 906-10247-3 737, 777, Dash-8 Contains: Joint Probe Ass'y (906-10261-8) Sense and Drive Cable ass'y (906-10260-11 & -12) This unit is CE Certified but not ATEX Certified. ================================================================================



TIME LIMITS (ATA-5) LOOP RESISTANCE TESTER & LOOP CONTROLLER

Standard Features: LOOP Resistance Tester: This set is dedicated to the resistance measurement of closed loops by induction of an AC Voltage up to 200V. LOOP Controller: This tool has a function to measure principal features of aircraft fire detection loop such as the Airbus, Bombardier, ATR42 & 72, Boeing, MD and BAE Aircrafts. It is the only Loop Controller in accordance with the Technical Specifications of the Sensor Loop Manufacturer

Specifications: —————————————————————————————————————— Model Number Size & weight Use On Aircraft Model —————————————————————————————————————— 20102A2 78 Lbs; All Fleet Loop Resistance Tester 24” x 16” x 10.10” 9240SI 165 x 75 x 35 mm Bombardier / Airbus (replaced by 20549SIC 400g Loop Controller 20549SIC 220 x 115 x 80 mm Bombardier / Airbus Loop Controller 670g



TIME LIMITS (ATA-5) AIR FLOW CUP –LOW /HI BLOW TEST

Usage: The air flow cup is used during the low/hi blow pressure test. This tool will be used locally to detect leaks. Note: Features and specifications are subject to change without notice.

Specifications: —————————————————————————————————————— Model Number Size & weight Use On Aircraft Model —————————————————————————————————————— G21007-1 4.1 Lbs 727, 737, 747, 757, 767, 777, 787 9” x 7” x 7”



LIFTING & SHORING (ATA-7) Adapters, Jacking Pad Aircraft

Usage: Used to interfere with most tripod jacks. Note: Features and specifications are subject to change without notice.

———————————————————————————————————–——- Model Number Applicable Aircraft Location —————————————————————————————————————— Learjet 2370102-4 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Nose 2572006-3 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Wing 2572006-8 Learjet 24, 25, 28, 31, 35, 55, 60 Wing 2572006-11 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Main Boeing A07001-11 767 FWD Body A07003-1 767 Outboard Body B07001-7 757 FWD Body C07002-1 737-600 to 737-900 Wing C07004-1 737-600 to 737-900 AFT Body C07007-1 737-600 to 737-900 FWD Body F70009-1 707 Outboard Wing F71138-500 /-501 707 Tail F71139 707 Aircraft Body F71156 707 Inboard Wing F80000-7 737-100 to 737-500 Aircraft Body F80001-1 737-100 to 737-500 AFT Body F80060-1, -4, -6 707, 737-100 to 737-500, 757 Inboard Wing J07001-23, -25 777 FWD Body J07002-1 777 Inner Wing J07003-1 777 Outer Wing K07003-15 787 FWD Body K07004-1 787 Inner Wing K07005-1 787 Outer Wing Bombardier G600-070001-1 CL-605, CL-300 Main & Nose G601R071001-1 CRJ, CL-850 Main & Nose G670-071000-1 CRJ700, CRJ900 Main & Nose G700-071001-1 Global Express Main & Nose GSB0700007 Q100, Q200, Q300, Q400 Nose GSB0700017 Q100, Q200, Q300, Q400 Main CG9000054-0001 CS100/ CS300 Kit complete CG9000054-0007 CS100/ CS300 Nose CG9000054-0009 CS100/ CS300 Wing Embraer AGE-04510-401 Phenom 100 Main & Nose AGE-04890-401 Phenom 300 Main & Nose AGE-04363-401 ERJ170/175/190/195 Main & Nose



LIFTING & SHORING (ATA-7) Aircraft Jacking Equipment

Usage: Used to jack the airplane using the Main Landing Gear or Nose Landing Gear Axle.

———————————————————————————————————–——- Model Number Applicable Aircraft Location —————————————————————————————————————— A07002-1, -11, -12 767 NLG Axle A07008-19 767 Jack bar set - MLG Axle B07003-1, -13, -15 757 Jack bar set - MLG Axle B07004-1, -12 757 Jack bar set - NLG Axle B07008-1 757 MLG Axle G215-070021-73 CL-415 Jack Adaptors - Flat Tire G415-070027-3 CL-415 Jack Adaptors J07004-23, -59 777 NLG J07005-33 777 MLG J07013-1 777 MLG Axle K07001-14 787 MLG K07001-18 787 MLG K07002-1 787 NLG 2317-T020-401 Embraer Phenom 300 NLG TMH MA02 ATR42/72 MLG TMH MA03 Fokker 100 MLG TMH NA01 ATR42/72 NLG TMH NA10 Fokker 100 NLG



LIFTING & SHORING (ATA-7) Axle Jacks - Wheel Change



LIFTING & SHORING (ATA-7) Hydraulic Axle Jack - Wheel

———————————————————————————————————–——-

Model Capacity Closed Number Ton US Height In. Applicable Aircraft —————————————————————————————————————— TMH CR01 44 6.9 See Data Sheet TMH CR02 60 3.9 See Data Sheet TMH CR04 49 6.7 See Data Sheet TMH CR05 49 8.8 See Data Sheet TMH CR06 6.6 13.5 See Data Sheet TMH CR07-00-00 27 19.3 See Data Sheet TMH CR08 60 6.9 See Data Sheet TMH CR09 38 10 See Data Sheet TMH CR10-00-00 8.8 11.8 See Data Sheet TMH CR11 33 7.1 See Data Sheet TMH CR12 49 9.2 See Data Sheet TMH CR13 8.8 11.8 See Data Sheet TMH CR14 3.3 24.4 See Data Sheet TMH CR15 60 8.5 See Data Sheet TMH CR17 38 6.7 See Data Sheet TMH CR22 84 10.6 See Data Sheet TMH CR23 60.5 8.46 See Data Sheet TMH CR25 33 7.8 See Data Sheet TMH CT02 60 3.9 See Data Sheet TMH CT03 38 6.7 See Data sheet TMH CT05 49 9.2 See Data Sheet TMH CT13 44 6.9 See Data Sheet TMH CT16 60.5 8.46 See Data Sheet



LIFTING & SHORING (ATA-7) Tripod Jack / Safety Stay

———————————————————————————————————–——–——-- Model Capacity Extended Applicable Typical Number Ton US Height In. Aircraft Application ——————————————————————————————————————–—— TMH AS01 6.7 96.4 ATR42/72 Tail TMH AS02 6.6 173.6 ATR42/72 Shoring TMH AS03 8.8 181.1 A320 / B707 Tail TMH AS09 13 118 A320 family CEO & NEO Shoring TMH AS10 11 157 A320 family CEO & NEO Shoring TMH AS12 13 267.7 A300/330/340 Safety Stay TMH AS18 1.7 74.8 ATR42/72 Tail TMH AS20 7 See Data Sheet A300 Shoring TMH AS23 1.6 98.4 F100 Tail TMH AS24 11 98.4 B737 Nose TMH AS25 14 283.4 B747 Tail support Stanchion TMH AS36 + TMH AS37 11 181.1 (with extension) A320 Shoring TMH AS50 7 183 A320 family CEO & NEO Tail TMH AS51 9 104 B737-100 to – 900 + MAX Nose TMH AS52 9 283 A330-200 / -300 Tail A340-200/ -300/ -500 / -600 Tail A350-900 Tail TMH AS53 24 179 B787-8 / -9 Nose TMH TJ20 11 135 A320 family CEO & NEO Nose TMH TJ21 39 179 A320 family CEO & NEO Wings TMH TJ30 11 151 B737-100 to –900 + MAX Tail TMH TJ31 39 122 B737-100 to –900 + MAX Wings TMH TJ40 11 137 A320 family CEO & NEO Nose B737-100 to –900 + MAX Nose TMH TJ41 38 181 A320 family CEO & NEO Wings B737-100 to –900 + MAX Wings TMH TJ42 11 183 A320 family CEO & NEO Tail B737-100 to –900 + MAX Tail TMH TJ50 22 205 A330-200 / -300 Nose A340-200/ -300/ -500/ -600 Nose A350-900 Nose B787-8 / -9 Nose TMH TJ51 110 260 A330-200 / -300 Wings A340-200 / -300 / -500 / -600 Wings A350-900 Wings TMH TJ52 22 205 A350-900 Nose TMH TJ80 78 236 B787-8 / -9 Tail TMH TJ81 101 193 B787-8 / -9 Wings




———————————————————————————————————–——–——--

Model Capacity Extended Applicable Typical Number Ton US Height In. Aircraft Application ——————————————————————————————————————–—— TMH TR04 49 181.5 ATR42/72 Wing A320 Wing & Tail B707 Tail B737 Tail B757 Nose, Wing, Tail B767 Nose TMH TR05 11 90.5 B737, F100 Nose TMH TR09 130 267.3 A300 Wing & Tail A310 Wing & Tail A330 Wing & Tail A340 Wing & Tail B747 Wing B767 Wing & Tail TMH TR12 16 275.6 A300 / A310 Tail A330 / A340 Tail B747 / B767 Wing TMH TR13 27 231.9 A300 / A310 Tail B747 / B767 Wing TMH TR15 66 322.8 B747 Tail TMH TR17 110 175.6 A320 Wing A300 Nose B707 Tail B737 Tail B747 Fuselage B757 Nose, Wing, Tail B767 Nose, Fuselage TMH TR19 3.3 70.9 ATR42 / 72, Fokker F27 Nose TMH TR20 11 159.5 ATR42/72, Fokker F27 Wing A320 Tail B707 Tail B737 Tail TMH TR23 55 173.3 A300 / A310 Nose A320 Wing & Tail B707 Tail B737 Tail B757 Nose, Wing, Tail B767 Nose ATR42/72 Wing TMH TR25 9 196.8 A310, A320, B707, B737 Tail ATR42 Wing




———————————————————————————————————–—————- Model Capacity Extended Applicable Typical Number Ton US Height In. Aircraft Application ——————————————————————————————————————–——- TMH TR27 11 175.2 ATR42/72 Wing A320 Tail B707, B737 Tail B757 Nose, Tail B767 Nose TMH TR28 4 74.8 ATR42/72 Nose TMH TR30 88 204.7 A300/A310 Wing B767 Tail TMH TR31 10.6 47.2 A320 Nose B707, B727, B767 Nose B737 Tail TMH TR35 10.6 101.2 B707, B737, F100 Nose TMH TR38 26.5 185.4 B707, B737 Tail B757 - Nose & Tail B767 Nose TMH TR39 44 220.5 A310 Tail B757 Wing & Tail TMH TR40 27 94.5 B727 Nose Wing Tail B737 Nose & Wing F100 Nose, Wing Tail TMH TR41 66 94.5 B727, B737 Nose F100 Nose & Tail TMH TR42 17 100.4 See Data Sheet TMH TR45 7.7 66.9 Embraer 120 Nose & Wing TMH TR47 55 202.8 A300, A310, A330, A340 Nose A320 Nose & Wing B707 Tail B737, B747 Nose B757 Nose, Wing, Tail B767 Nose, Tail TMH TR55 11 79.1 ATR42/72 Tail TMH TR58 22 92.5 B727 Tail B737 Nose TMH TR62 4.4 181.5 A320 Wing & Tail B757 Tail ATR42/72 Wing TMH TR63 11 134.2 A320 Nose B737 Tail TMH TR64 8.8 187 A320 Tail ATR42/72 Wing TMH TR65 7.7 216.5 A300/A310 Tail




———————————————————————————————————–—————— Model Capacity Extended Applicable Typical Number Ton US Height In. Aircraft Application ——————————————————————————————————————–——— TMH TR66 22 185 A300/A310/ A320 Nose B737 Wing & Tail B747 Nose B757 Nose & Tail B767 Nose ATR42/72 Wing TMH TR67 77 236.2 A300/A310 Wing & Tail B747 Wing B767 Wing & Tail TMH TR69 33 See data Sheet Aircraft Shoring TMH TR72 13 147.6 B737 Tail TMH TR73 33 210.6 A300/A310 Nose & Tail A320 Tail A330 /A340 B737 Tail B747 Nose B757 Nose & Tail B767 Nose & Wing ATR42/72 Wing TMH TR76 44 See Table B727 Nose & Wing B737 Wing F100 Wing A320/A321, B757 Tail ATR Wing B757 Tail TMH TR79 5.5 74.8 ATR42/72 Nose & Tail TMH TR85 44 118.1 A319/A320 Nose B727, B737 Wing F100 Wing TMH TR87 11 145.6 A320/A321 Nose B727-100 & -200 Nose B737-100 & -200 Tail B737-300 Nose & Tail TMH TR88 44 183.2 A320 Wing & Tail A321 Wing & Tail B757 Nose & Tail B767 Nose ATR42/72 Wing TMH TR89 6.6 188.9 A320/A321 Tail TMH TR92 16 275.6 A300, A310, A330, A340 Tail B747, B767 Wing TMH TR94 44 115 B727 Nose & Wing B737 Wing F100 Wing




———————————————————————————————————–—————- Model Capacity Extended Applicable Typical Number Ton US Height In. Aircraft Application ——————————————————————————————————————–——- TMH TS15 11 76.7 ATR42/72 Nose CRJ100 - Wing TMH TS19 5.5 74 ATR42/72, CRJ100 Nose TMH TS31 8.25 75.6 ATR42/72 Nose & Tail TMH TS32 38.5 115 B737 Wing TMH TS33 16.5 100.4 A320, B737-100 to –300 Nose TMH TS34 13 83.4 Business & General Aviation TMH TS35 28 82.2 Business & General Aviation



LEVELING (ATA-8) Plumb Bob Kit

Usage: Used to indicate that the aircraft on ground is level.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— 108 Learjet 23, 24, 25, 28, 31, 35, 55, 60 G601R082202-1 CRJ / CRJ700 / CRJ900 G700-082001-11 Global Express GSB0800001 Q100, Q200, Q300, Q400

G601R082202-1

Leveling High Precision

G600-080003-1

Usage: Leveling the aircraft for maintenance

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— G600-080003-1 CL-604, CL-605, CL-300 G601R082201-1 CRJ / CL-604 / CL-605 G700-081002-1 Global Express G600-080001-161 CL-604, CL-605



LEVELING (ATA-8) Weighting Load Cells Kit AE Series

Usage:

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— TMH AE01 Overload Warning Horn Kit A310, A320, A330, A340, A350, A380 B737 TMH AE20 Wireless Weighing Load Cells A320 Family Ceo & NEO TMH AE30 Wireless Weighing Load Cells B737-100 to –900 + MAX ATR42/72 TMH AE40 Wireless Weighing Load Cells B737-100 to –900 + MAX A320 family CEO + NEO TMH AE50 Wireless Weighing Load Cells A330, A340, A350-900, B767, B787-8 TMH AE70 Wireless Weighing Load Cells B747, B777 TMH AE80 Wireless Weighing Load Cells A380



TOWING & TAXIING(ATA-9) Tow Bars

Usage: Used to tow or push the aircraft

———————————————————————————————————–——- Model Number Applicable Aircraft Weight Lbs Dimensions In. —————————————————————————————————————— TMH BRC21 (Two bars in one) A320/ A321/ A330/ A340 846 197 And all aircraft of categories I and IV As per AS1614 standard TMH TB02 CRJ100 167 118 TMH TB03 ATR42/72 99 124 TMH TB04 (Splittable) ATR42/72 132.1 122.6 TMH TB05 MD80 595 205 TMH TB07 (Splittable) MD80/ Fokker 100 264 205 TMH TB14 707, KC135 350 248.8 TMH TB15 (Splittable) 707, KC135 420 248.8 TMH TB10 737 506 196.8 TMH TB11 747 880 98.4 TMH TB12 757 583 165.3 TMH TB13 767/ A330/ A340 682 165.3 TMH TB19 A330 / A340 / B777 / B767 660.8 169.3 TMH TB19-80-00 (Splittable) A330/ A340/ B777/ B767 662 118.11 TMH TB22 A300/ A310 580 177.1 TMH TB23 A319/ A320/ A321 484 206.5 TMH TB24 A318/ A319/ A320/ A321/ B737 484 206.6 TMH TB26 A320/ B757 561 206.6 TMH TB27 Fokker 100/ A320/ B737/ BAE146/ C130 264 198.2 TMH TB29 B727/ B737/ A300/ A310 660 177.1 TMH TB30 Fokker 100 / Fokker 70 484 196.8 TMH TB70 A320 Family CEO + NEO 618.95 213.34 TMH TB71 B737 All series (737-100 to 737-900) 618.95 213.34 TMH TB72 B737 / A320 Family CEO + NEO 618.95 213.34 TMH TB73-00-00 (Fly Away) B767/ B777/ A330/ A340 220 78.7 TMH TB77 B767/ B777/ B787/ A330/ A340/ A350 1101 181 TMH TB80 A380-700/-800/-800R/-800F/-900 1650 1403 TMH TB93 See below - Tube + Head TMH TB93-10-00 Dismountable tube ass’y with swivel ring 165 177 TMH TB93-20-00 Dismountable tube ass’y with shock absorber 172 186 TMH TB93-50-00 Splittable tube ass’y with swivel ring 163 177 TMH TB93-60-00 Splittable tube ass’y with shock absorber 170 186 Available Heads TMH TB93-31-00 / CRJ700 / 900 / 1000 TMH TB93-32-00 / CRJ100 / 200 TMH TB93-33-00 / E170/ E175/ E190 / E195/ Lineage 1000



TOWING & TAXIING(ATA-9) Tow Bars

Usage: Used to tow or push the aircraft

———————————————————————————————————–——- Model Number Applicable Aircraft Weight Lbs Dimensions In. —————————————————————————————————————— TMH TBC11 B747 880 141 TMH TBC45 B737 / A320 550 200 TMH TBC50 A319/ A320/ A321 550 200 TMH TBC60-10-00 B767/ B777/ A330/ A340 700 147 TMH TBC60-20-00 (Splittable) B767/ B777/ A330/ A340 700 147 TMH TBC60-60-00 (Splittable) B767/ B777/ A330/ A340 700 147 TMH TBC95-60-00 A340-500/-600 880 141 G670091000-1 CRJ700/900 178 153 GSB0900005 Dash 8-400 125 140 AGE-04914-401 Phenom 300 (Head only) 15



TOWING & TAXIING(ATA-9) Airplane Recovery - Towing Strap

Usage: Used to tow the aircraft by the undercarriage.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— G601R091008-1 CRJ200 G604-091008-1 CL-604/CL-605 G700-091004-1 Global Express GSB091007-1 Q100, Q200, Q300 GSB0910008-1 Q400

G700-091004-1

Wheel Chocks

Usage: Used to prevent the aircraft from moving while parked or moored.

———————————————————————————————————–——- Model Number Applicable Aircraft Length Width Height Weight —————————————————————————————————————— DCM1506 CL-604, 605, GX, CRJ200 24” 7” 5 1/2” 24 CRJ700/900, 757 DCM1534 747, 767, 777, 787 37” 7” 5 1/2” 37 DCM1536 Learjet 23, 24, 25, 28, 29, 31 12” 7” 5 1/2” 12 35, 36, 40, 45, 55, 60, 60XR ERJ135, 145, 170, 175, 190, 195 Boeing 707, 717, 727, 737 all MD-80, Phenom 300 DCM1537 CL-300, ERJ-170, 175, 190, 195 18” 7” 5 1/2” 18 GSB100004 Dash-8 Q100, Q200, Q300, Q400 24” 7” 5 1/2” 24”



PARKING & MOORING (ATA-10) Pole Removal / Installation Tool - Pitot Static

A10002-9

Usage: Used to remove or install the protective cover on the pitot static probe .

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— A10002-7 Boeing 737 all models, ERJ-170, 175, 190, 195 A10002-9 Boeing 747, 767, 777, 787

Warning Streamers

Usage: Used to highlight locations of safetying or maintenance - required devices on the aircraft and to provide for their timely removal. Attached to GSE installed on the aircraft.

———————————————————————————————————–——- Model Number Applicable Aircraft Length —————————————————————————————————————— G600-100001-11 (Remove Before Flight) CL-600, 604, 605, CL-300, Global Express 27” G601R100001-1 (Remove after test) CRJ200, 700, 900 27” G601R100001-2 (Remove Before Flight) CRJ200, 700, 900, Q100, Q200, Q300 Q400 27” GSB100001 (Remove after Test) Q100, Q200, Q300, Q400 27” GSB100002 (Remove Before Flight) Q100, Q200, Q300, Q400 27” NAS1091 (Remove Before Flight) Boeing all & Embraer all Various NAS1756 (Remove Before Flight) Boeing all & Embraer all 12”, 24”, 36” 60”



PARKING & MOORING (ATA-10)

Mooring Equipment

G600-100018-1 Usage: To Secure Aircraft to Ground

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— C10002-9 737-600 /700 /800 /900 C10008-xx B737-8 G1001020014-001 CL-300 G600-100018-1 CL-600 / 601 / 604 G601R102001-1 CRJ G700-102001-1 Global Express

Plug & Covers

Usage: For Environmental damage protection

Various Plugs & Covers in I.T.E.M. available. Review your specific aircraft ITEM for part numbers.



PARKING & MOORING (ATA-10) Pin, Lock Landing Gear

Usage: Used to ensure that the landing gears remain locked in the down position when the aircraft is parked or moored / to lock the towing lever during towing.

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— A09003-1 Lock pin towing lever NLG 737-600 to –900, 757, 767, 777 A09003-2 Lock pin towing lever NLG 737-600 to –900, 767, 777, 787 G600-100015-1 Pin NLG ground lock CL-604 / CL-605 G604-101051-1 Pin MLG ground lock CL-604 / CL-605 G601R101103-1 Pin MLG ground lock CRJ200 G601R101104-1 Pin NLG ground lock CRJ200 G670100001-1 Pin NLG ground lock CRJ700 / 900 G670100002-1 Pin MLG ground lock CRJ700 / 900 GSB100007 Pin MLG ground lock Q100, Q200, Q300 GSB100019 Pin NLG ground lock Q100, Q200, Q300, Q400 GSB100029 Pin MLG ground lock Q100, Q200, Q300, Q400 DCM1532 Pin MLG ground lock CL-300 DCM1533 Pin NLG ground lock CL-300 DCM1581 PIN MLG Ground Lock Legacy EMB-550 DCM1582 PIN NLG Ground Lock Legacy EMB-550 A32014-1 MLG Downlock Pin 767 A32014-2 NLG Downlock Pin 767 C32026-1 NLG & MLG Downlock Pin 737-600/ 700/ 800/ 900 F70008-500/501 NLG Downlock Pin 707 J32011-3 MLG Downlock Pin 777, 787 J32011-7 NLG Downlock Pin 777, 787



SERVICING (ATA-12) Lavatory & Potable Water

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— G1001200001-001 Lavatory Servicing Unit Adaptor CL-300 G601R121801-29 Adaptor Potable Water Supply CRJ

Nitrogen & Oxygen

———————————————————————————————————–——- Model Number Description Applicable Aircraft ————————————————————————————————————–— G600-120001-1 Adaptor Nitrogen Charging CL-600/604/605, 300, Global Express G601R121611-1 Adaptor Nitrogen Charging CRJ G670121000-1 Dolly - For Nitrogen bottle With Booster All Aircraft (1 Bottle) GSB1210012 Kit Oxygen Charging Adapter Q100, Q200, Q300, Q400 G700-200002-1 Panel Nitrogen Shop Air 0-5 PSIG Global Express G604-200026-1 Gaseous Test Panel 0-100 PSIG CL-604, Global Express G601R121605-1 Gaseous Test Panel 0-100 PSIG CRJ200/ 700/ 900, Q100/ 200/ 300/ 400 TMH RD01 Nitrogen Servicing Cart / Axle carrying Wheel Carrying / Wheel Change Dolly See Data Sheet TMH RD18 Nitrogen Cart (4 Bottles) See Data Sheet TMH RD29 Nitrogen Cart (2 Bottles) See Data Sheet TMH RD49 Oxygen Cart (2 Bottles) See Data Sheet



SERVICING (ATA-12) NATO CASE

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— TMH GA35-00-00 Nitrogen Test Box All Aircraft TMH GA36-00-00 Air 3520 Test Box All Aircraft TMH GA37 Skydrol Test Box All Aircraft TMH GA38-00-00 Nitrogen and /or Mineral Oil MIL-H5606 All Aircraft TMH GA41-00-00 Nitrogen / Air 3520 Test Box All Aircraft TMH GA42-00-00 Nitrogen/Skydrol Test Box All Aircraft TMH GA43-00-00 Skydrol Test Box All Aircraft TMH GA50-00-00 Nitrogen/Air 3520 Test Box ATR42/72 TMH GA53-00-00 Nitrogen/Skydrol Test Box All Aircraft TMH GA55-00-00 Nitrogen / Skydrol Test Box All Aircraft TMH GA70 Mineral Oil Test Box All Aircraft TMH GA71 Skydrol Test Box All Aircraft TMH GA72 Nitrogen Test Box All Aircraft TMH GA73 Mineral Oil / Nitrogen Test Box All Aircraft TMH GA74 Skydrol / Nitrogen Test Box All Aircraft



STANDARD PRACTICES AIRFRAME (ATA-20) Grommet & O Ring Installation Tool

Usage: To Install NAS1368 Plastic flip grommet

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— A20006-32 Installation Tool Grommet Set NAS1368 737 all, 767, 777, 787 ST1065C Installation Tool Grommet Set NAS1368 707, 737 ST848 Installation Tools O Rings 767 ST848R Removal Tool O Rings 767, 777, 737 all models

A20006-32

Cutting Tool - Swaging Tool - Bearing Tools

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— A20012-10/-11 Swaging Tool—Bearing (S302T001-305) 767 C57001-1 Roller Swaging Tool (.560 & .619 dia.) 737 F70297-1 Roller Swaging Tool (BACB10C196 Bearing) 707 F80013-37 Kit Roller Swage Bearing (2 3/8” - 2 5/8” dia.) Boeing all aircrafts F80113-105 Kit Roller Swage Bearing (15/32” - 2 3/8” dia.) Boeing all aircrafts F80113-61 Kit Roller Swage Bearing (3 7/8 - 4 1/8” dia.) Boeing all aircrafts F80113-88 Kit Roller Swage Bearing (3” - 3 5/8” dia.) Boeing all aircrafts F80113-95 Kit Roller Swage Bearing (5 1/4” dia.) 777 F80117-1 & -10 Roller Bearing Swage Assembly (10-60545-205S) 737-100 to –500 F80205-1 Bearing Swaging Equipment (10-61846-3 & 10-61970-2) 737-100 to –500 G600-206001-1 Hydraulic Swaging tool CL-600 G600-206002-1 Cutter Kit Bearing - MS14103-5 Bearing CL-600 G600-206003-3 Cutter Kit Bearing - MS14103-7A Bearing CL-600 G600-206004-1 Swaging Tool Kit - MS14103-5 Bearing CL-600 G600-206006-1 Swaging Tool Kit - MS14103-4 Bearing CL-600 G600-206007-1 Cutter Kit Bearing - MS14103-4 Bearing CL-600 G600-206008-1 Cutter Kit Bearing - MS14103-6 Bearing CL-600 G600-206009-1 Swaging Tool Kit - MS14103-6 Bearing CL-600 G600-322003-1 Kit Oversize Bushing Replacement (Cutter) CL-605 G601R200007-39 Hydraulic Kit Bearing Swaging CRJ G601R200008-1 Bearing Tool Kit - Swaging and Cutting CRJ (Use with G601R200007-39 MS14103-7A, MS14103-8 KR9-CWGB) G601R200009-1 Bearing Tool Kit - Swaging and Cutting CRJ/ 700/ 900 KSC322209B-1, KSC322209B-2, KSC322209B-3



STANDARD PRACTICES AIRFRAME (ATA-20)

Cutting Tool - Swaging Tool - Bearing Tools

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— ST918 Mandrel Ball Bearing Pressing 707, 737 ST919 Support - Bearing Installation 707, 737, 767 ST922 Staking Tool 767 ST925 Staking Tool Bearing Point 707, 737 ST926 Staking Tool Roller Bearing 707, 737, 767, 777 ST927 Removal Tool Bearing 707, 737, 767, 777 ST928C Swaging Tool Roller Bearing Sleeve 737 ST929-1A Swaging Tool Roller Bearing Sleeve 707, 737 ST929-2C Staking Tool—Bearing Sleeve 6 point 767 ST929-4 Staking Tool Bearing Line 707, 737 ST931A & B Staking Tool Bearing Ball Point 707, 737 ST931D Staking Tool Ball Bearing 707 ST932 Staking Tool Roller Bearing 707, 737, 767 ST932B Swaging Tool Roller Housing Bearing 707, 737 ST932C Swaging Tool Roller 707, 737 ST933 Tool Bearing, Ring, Housing & Shaft Type 707

Digital Protractor

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— 3052-11 / 655-881J Dial Indicator ERJ170/175 G601R200003-1 Dial Indicators & Holder (In.) CRJ/700/900/ CL-604 / CL-605 G601R200003-3 Dial Indicators & Holder (Metric) CRJ/700/900/ CL-604 / CL-605 GSB2000009 Digital Protractor Q100, Q200, Q300, Q400 PRO360 / KS5549 Digital Protractor CRJ / 700 / 900, CL604, Global Express, CL-300 CL-605 950-315 Digital Protractor CL-605 A01-700-28000-1 Aileron / Flap RH/LH Rigging CRJ / 700 / 900, CL605, Global Express, CL300

Gaseous Test Panel To supply regulated shop air or nitrogen for general purposes.

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— G604-200026-1 Air Test Panel CL-604 / CL-605 / Global Express G601R121605-1 Air Test Panel CRJ200 / 700 / 900

G604-200026-1




Positive and Locking System Installation & Removal Tool of Tab Washer NSA5454 Description: The positive locking system has been developped to cover the needs of a wide range of applications requiring a quick, self-contained, re-usable, com-pact, positive locking method for threaded components. Standard Features: - The nut and washer assembly are highly re-usable - Easily removed without damage - Kitting of all tools include in a convenient plastic case - Nut, lockwasher and shaft are balanced due to the absence of a keyway.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— SL90 A300, A310, A319, A320, A321, A340




Boom Hoist Equipment (400 lbs Capacity) Model # A20001-82 Use on Aircraft Models: Boeing 737-600 to –900 Boeing 747 Boeing 757 Boeing 767 Boeing 777 Boeing 787

USAGE The A20001-82 Boom Hoist equipment, in conjunction with appropriate adapters, will be used to to install / remove various airplane components. Short hoist Arm Ass’y may be used as a 27 inch extension to the boom hoist. When required for installation & removal of vari-ous airplane components. Long hoist arm ass’y may be used in conjunction with A78018 Sling– Thrust Reverser Translating Sleeve, CF6-80C2 & as an extension to the Boom Hoist.

Weight And Dimensions:

416 Lbs Boom Hoist 18 Lbs Short Hoist Arm 36 Lbs Long Hoist Arm

Boom Hoist Assembled: 46” x 92” x 113”

Boom Hoist Disassembled: 36” x 86” x 92”

Short Hoist Arm: 2” x 10” x 31” Long Hoist Arm: 2” x 31” x 55”



AIR CONDITIONING (ATA-21)

Lock Hold Open Outflow Valve

Usage: Used to lock the outflow valve in the full open position which allows airplane to be dispatched for unpressurized flight with outflow valve inoperative.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— A21014-1 767-400 J21006-1 777 K21007-1 787

Test Set Outflow Valve Altitude Limiter Usage: Used to do the special test of the outflow valves.

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— G601-210007-1 Test Set - Outflow Valve Altitude limiter CL-600 / CL-604 / CL-605 G601-210007-3 Test Set - Outflow Valve Altitude limiter CL-600 / CL-604 / CL-605 G601R210001-1 Test Set - Outflow Valve Altitude limiter CRJ 115 Vac / 60 Hz G601R210001-145 Test Set - Outflow Valve Altitude limiter CRJ 220 Vac / 50 Hz G601R210001-3 Test Set - Outflow Valve Altitude limiter CRJ (No Vacuum Pump) G600-210004-183 Kit Pneumatic Pressure Test (115 V - 60 Hz) CL-605 G600-210004-197 Kit Pneumatic Pressure Test (220 V - 50 Hz) CL-605

G601-210007-1



Usage: Used to actuate the

emergency release latch on overhead bins.

AUTOFLIGHT (ATA-22) Various Test Boxes - See Airplane I.T.E.M.

COMMUNICATION (ATA-23) Various Test Boxes - See Airplane I.T.E.M.

TMH GA30 - IDG Filling Unit

ELECTRICAL POWER (ATA-24) Removal & Installation IDG

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— TMH SD09-10-00 R/I Dolly IDG V2500 Serie 766219 A318 / A319 / A320 / A321 TMH SD09-60-00 R/I Dolly IDG V2500 Serie 772292 A318 / A319 / A320 / A321 TMH SD10-20-00 R/I Dolly IDG CFM56 - 740119 Serie A319/ A320 / A321 TMH SD10-60-00 R/I Dolly IDG CFM56 - 772181, A319/ A320 / A321 1706903, 1708897 Serie TMH SD25 R/I IDG B747-400 / B757 / B767 TMH SD36-10-00 R/I IDG - CF6-80E1 A330/ A340 TMH SD36-20-00 R/I IDG - CFM56-5 A330/ A340 TMH SD36-30-00 R/I IDG - PW4168 A330/ A340 TMH SD36-60-00 R/I IDG - CFM56-5 (Type 767 142)



FIRE PROTECTION (ATA-26) Test Equipment—Fire Extinguishing System

———————————————————————————————————–——- Model Number Description Applicable aircraft —————————————————————————————————————— B26002-1 Test Equipment - Discharge Lines, Cargo Fire Ext. 737 all models C26001-20 Test Equipment - Fire Extinguishing System 737 C26002-21 Test Equipment - Engine / APU Fire Detection System 737-100 to –500 C26004-8 Test Equipment - Engine Fire Extinguishing System 737 all models C26004-32 Test Equipment - Engine Fire Extinguishing System 737 all models C26004-33 Test Equipment - Engine Fire Extinguishing System 737 all models C26005-1 Test Box - APU / Engine Fire Detection System 737-600 to –900 C26006-1 Test Box - Cargo Fire Extinguishing System 737 all models C26006-29 Test Box - Cargo Fire Extinguishing System 737 all models C26006-30 Test Box - Cargo Fire Extinguishing System 737 all models C26006-54 Test Box - Cargo Fire Extinguishing System 737 all models C26008-xx Removal / Installation - Cargo Fire Extinguisher 737-8 C26009-xx Removal / Installation - Engine Fire Extinguisher 737-8 F70213-1 Breakout Box Control Unit Fire Detection 707 F80229-69 & -61 Test Equipment - Fire Extinguishing System 737 all models F80229-52 & -56 Shorting Plug Ass’y 737 all models F80229 Adapter Cable Assembly 737 all models (-48, -57, -58, -59, -60, -61) G700-260001-1 Harness - Fire Detection / Extinguishing Global Express G700-262102-1 Tester - Firex Squib Circuit Global Express J26003-12 Test Box - Time Delay, Cargo Fire Extinguishing Bottle 777 J26004-24, 28, 53, 54 Test Equipment - Squib Fire Extinguishing System 777, 787 J26005-1, -19, -24, -32 Test Equipment - Fire Extinguishing Tubing Cargo 767, 777 J26008-1, -2, -3, -35 Test Equipment - Engine Fire Extinguishing System 777 J26009-1 Test Equipment - Fire Extinguishing Tubing Cargo 767, 777 K26001-1, -20 Test Equipment - Fire Extinguishing Tubing Cargo 787

Extender Card Set

———————————————————————————————————–——- Model Number Description Applicable Aircraft —————————————————————————————————————— G26004-39 / -40 Extender Card - Electronic Card file 767 J26002-1 / -2 / -3 Extender Card—E/E Equipment 777 AGE-05190-401 Extender Cards Set Phenom 300



FLIGHT CONTROLS (ATA-27) Various Tool - See Airplane I.T.E.M.

Test Equipment—Leak & Pressure APU Fuel Line Shroud Usage: Used to check pressure and leakage of APU fuel line shroud.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— A28005-24 767 A28005-50 737-600/700/800/900, 767, 777 A28005-43 777 A28005-48 737-600/700/800/900 K28004-1, -30 787

FUEL (ATA-28)

Spanner Wrench Fuel Sump Drain Valve Usage: Use for installation or removal of sump drain Valve.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— A28012-1 767, 777 A28012-2 777 C28002-9 737-100/200/300/400/500, 777 K28001-1 787



FUEL (ATA-28)

Adapters - Sump Drain Valve Removal / Installation Usage: Use for installation & Removal of the primary sump drain valves from the fuel tanks.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— B28001-11 737-100 /-200 B28001-13 737-300 thru -900 B28001-18 727, 737, 757, 767, 777

B28001-11

Tool Fuel Drain Valve Removal Usage: Used to drain fuel from all tanks outboard of fuselage.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— G600-280002-23 CL-600 / CL-300 / CL-605 G601R281101-1 CRJ / 700 / 900 (2 pins) G601R281101-9 CRJ / 700 / 900 (4 pins) G700-280001-1 Global Express GSB2810001 Dash-8 Q100 / Q200 / Q300 / Q400 J28013-1 767, 777 K28002-1 787 CG9000063-0001 CS100/ CS300

K28002-1

Fuel Sampling Equipment Usage: Used to collect fuel samples from the sump drain valves and to drain water.

———————————————————————————————————–——- Model Number Applicable Aircraft —————————————————————————————————————— A12001-14 747, 767 A12001-15 777, 787 GSB1210014 Q100, Q200, Q300, Q400

A12001-15



FUEL (ATA-28) Fuel Tank Venting Usage: Used to ventilate fuel tanks during maintenance.

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— A28003-90 767, 787 G1002813022-001 CL-300 G604-281101-1 CL-604 / CL-605 G670281102-1 CRJ/ 700 /900 (Outboard Fuel Tank) G670281103-1 CRJ/ 700 /900 (Inboard Fuel Tank) G700-281001-1 Global Express

A28003

G604-281101-1



HYDRAULIC POWER (ATA-29)

Drain Kit - Hydraulic System & Ground Service Coupling

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— G600-120005-1 Adapter Ground servicing Engines CL-604/ CL-601/ CL-600 / CL-605 C29004-1 Drain Hose Hydraulic Reservoir Boeing 737 all models CG9000023-0001 Kit Hydraulic Fluid Sampling CS100/ CS300 G600-290001-11 Kit Hydraulic System Drain Line CL-604 / CL-605 G600-290002-1 Kit Sampling Adapter CL-604 / CL-605 G601R291001-1 Drain Kit—Hydraulic System CRJ200/ 700/ 900 G601R291004-25 Kit Sampling Adapter CRJ200/ 700/ 900 GSB2900002 Kit Hydraulic Coupling Q100/ Q200/ Q300/ Q400 G700-121204-1 Ground Hydraulic Coupling Global Express TYPE 101 Ground Hydraulic Coupling A300/ A310/ A320/ A330/ A340/ B747 B757/ B767

Tool Set—Hydraulic Filter Overhaul

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— A29003-49 Tool Set Hydraulic Filter Overhaul 767, 777 A29003-54 Tool Set Hydraulic Filter Overhaul 777 A29004-1 Tool set - Hydraulic Module Filter Overhaul 767

Cable Assembly - Hydraulic Leakage Set Cable assembly is used in series between the airplane wiring connector & the electric driven hydraulic pump. With leads to connect to a 0-50 AMP AC Ammeter for measuring pump current & determining related system internal leakage.

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— F80135-13 Boeing 727 & 737 all models



HYDRAULIC POWER (ATA-29)

Removal / Installation Equipment—Ram Air Turbine Usage: Used in the installation / removal of the Ram air turbine

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— J29002-1 Boeing 777 K29002-78 Boeing 787

Hydraulic Test Bench / Filling Unit

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— TMH GA01 Hydraulic Test Bench Max. 3000 psi See data sheet TMH GA10 Filling Unit 0 to 435 psi See data sheet TMH GA11-00-00 Mobile Fluid Rig - Max 8700 psi See data sheet TMH GA15-00-00 Mobile Fluid Rig - Max 3000 psi See data sheet TMH GA16-10-00 Portable Fluid Flow Assessment Unit See data sheet TMH GA18 Portable Turbine Oil Dispenser See data sheet TMH GA24 Mobile Fluid Rig - Max 145 psi See data sheet TMH GA25 Hydraulic System Fluid Dispenser See data sheet TMH GA26 Mobile Fluid Rig - Max 435 psi See data sheet TMH GA34-50-00 MLG Refilling Tool - Max 200 psi See data sheet TMH GG13-50-00 MLG Filling Unit - Max 200 psi See data sheet TMH PM07-50-00 Hand Pump - Mineral Oil See data sheet TMH PM07-60-00 Hand Pump - Skydrol See data sheet TMH 3000 Mobile Hydraulic test stand - Max 3500 psi See data sheet TMH 5000 Mobile Hydraulic test stand - Max 5000 psi See data sheet TMH 5500 Mobile Hydraulic test stand - Max 5000 psi See data sheet MEH 2429 Mobile Hydraulic test unit ATR GE 195 Hydraulic Testing Unit See data sheet



LANDING GEAR (ATA-32)

Brake Pressure Unit - Adjusting & Servicing A01-670-1500-1 The DCM “Brake Pressure Test Unit” is a very simple unit which is intended to be used for adjusting and servicing of the brake system, on either the CRJ series, Challenger 300, Challenger 605, Global Express and ERJ140/145 aircrafts.

In fact, it can also be used on any other types of aircraft by simply changing the adapter that connect to the brake system.

STANDARD FEATURES Model: A01-670-1500-1

Finish: Safety yellow acrylic enamel

Accuracy of the unit: (0.1%) gauge and transducer

Pressure gauge: Skydroll resistant. Initial calibration required, high impact resistant, longer field service life, great reading accuracy.

Maximum Working Pressure: 3,000 psi +/- 200 psi

ADDITIONAL INFORMATIONS This kit can be operated with or without a computer (# RCS 486/PE NT - supplied by Techmatron) with an acquisition card # UPC 601U (supplied by validyne). These equipments are not included with the DCM kit. The wheels, (2 swivels and 2 fixed), tow bar and handles make the DCM oil brake easy to move and handle.




Brake Adjustment Pressure - Bleed / Test Unit

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— G600-320024-145 Brake Pressure Test kit CL-604 / CL-605 G600-320026-123 Fixt. Brake Pedal Pressure Test CL-604 / CL-605 G601R324302-1 Brake Pressure Test Kit CRJ G601R324303-1 Fixt. Brake Pedal Pressure Test CRJ200/ 700/ 900 G670324001-1 Brake Pressure Unit - Adjusting & Servicing CRJ200/ 700/ 900/ 1000 A01-670-1500-1 Brake Pressure Unit - Adjusting & Servicing CL-604 /Global Express / (See data sheet on next page) ERJ145 G1003243031-001 Brake Pedal Adapter Kit CL-300 J32001-67 / -68 Measuring Equipment Brake Pedal 737-600/-700/-800/-900 747, 757, 767, 777 AGE-05416-401 Device Pressure Test Brake Phenom 300

Thread Protector - Axle Protector

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— C32022-17 Thread Protector MLG & NLG Axle 737-600/ -700/ -800 /-900 C32022-20 Thread Protector MLG & NLG Axle 737-600/ -700/ -800/ -900 F72880-1 Thread Protector Landing Gear Axle 707 F72913-10 Thread Protector MLG Axle 737-100/-200/-300/-400/-500 F72913-8 Axle Protector 737-100/-200/-300/-400/-500 F72913-11 Thread Protector 737-100/-200/-300/-400/-500 F72913-13 Thread Protector MLG & NLG Axle 737-100/-200/-300/-400/-500 F80115-10 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-500 F80115-11 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-400/-500 F80115-12 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-500 F80115-13 & -14 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-400/-500 F80115-15 Thread Protector & Alignment Tool Main Gear 727 F80116-16 & -17 Thread Protector & Alignment Tool Main Gear 737-400 J32007-1 Thread Protector NLG Axle 777 J32031-12 Protector Equipment Axle - MLG 767-400, 777, 787 K32002-1 Thread Protector NLG Axle 787 G601R324305-1 Protective Sleeve MLG CRJ200 G601R326306-1 Protective Nut MLG Sleeve CRJ200 G670-321101-2 Protective Sleeve MLG Axle CRJ700

G600-320024-145




Inflation Tool - Deflation Tool (Tire & Strut)

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— A12007-23 Inflation Tool Tire 767-200/ -300/ -400, 747-400/ -8 F70200-18 Inflation Tool Strut 707, 727, 737 All models, 747, 757 767-400, 777, 787 F70199-52 Inflation Tool Tire 707, 727, 737 all models, 757, 767, 777, 787 TMH DI56-10-00 Inflation Tool Tire Max 175 PSI All Aircraft (Equipped with standard tire valve or High flow tire valve) TMH DI56-20-00 Inflation Tool Tire Max 360 PSI All aircraft (Equipped with standard tire valve or High flow tire valve) F70294-1 Deflation Tool Tire 707, 737 All models GSB1210016 Inflation Tool Strut / Gauge CRJ, Q100, Q200, Q300, Q400 GSB1216005 Deflation Tool Tire Q100, Q200, Q300, Q400 G600-324006-1 Digital Pressure Gauge - Tire CL-600/ -604 / -605 / -300

Brake Bleed Hose Kit

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— G1003240016-025 Brake Bleed Hose CL-300 G600-320024-89 Adapter Bleeder Valve CL-600/ 604 / CRJ200/ 700/ 900/ GX G600-320025-11 Brake Bleed Hose CL-600/ 604 / -605 J32060-1 Drain Equipment - OLEO MLG & NLG 767, 777, 787, 737 all models G601R324301-1 Brake Bleed Hose CRJ200, Q100, Q200, Q300, Q400 G700-324305-1 Brake Bleed Hose Global Express G1003210001-001 Servicing Adapter NLG - Hydraulic CL-300 MS27612-5 Adapter Bleeder Valve CRJ - Embraer MS27611 Valve Bleeder CRJ - Embraer AN6204-1 Brake Vale Bleeder Gulfstream - Falcon TMH GA12 Acft. Brake System Filling Unit All Aircrafts

G700-324305-1 J32060-1 G1003240016-025 G1003210001-001 TMH GA12




Dolly MLG & NLG

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— 23TME5-83045 Installation Dolly MLG Boeing 707 4PME5-83046 Transport & Wheel Inst’l Dolly Nose Gear Boeing 707 A32038-1 Transport Dolly - NLG 767 (Not for shipping) Boeing 767 A38038-23 Transport Dolly - NLG 757 & 767 (not for shipping) Boeing 757, 767 B32050-50 Build Up Stand - MLG Boeing 757, 767 A32057-1 / -10 / -40 Build Up Stand - NLG Boeing 757, 767 G604-320001-1 Dolly MLG & NLG Removal & Installation CL-604 G601R321006-1 Dolly MLG & NLG Removal & Installation CRJ200 J32030-44 Transportation Dolly - NLG Boeing 777 K32010-1 Transportation Dolly - NLG Boeing 787 DCM1563 Transport Dolly - NLG & MLG Installation Learjet 85 DCM1564 Dolly MLG - Installation / Removal Legacy EMB-550 DCM1596 Dolly NLG - Installation / Removal Legacy EMB-550 TMH SD06 MLG Handling Trolley See data sheet

Wheel & Brake Dolly

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— G601R324001-1 Dolly - Wheel & Brake Installation / Removal CRJ200 / CL-850 DCM1538 Dolly - Wheel & Brake Installation / Removal CL-300, 600, 601, 604, 605 CRJ700, 900, GX, Q100, Q200 Q300, Q400 TMH 550 Servicing Trolley - Wheels / Jacks / Nitrogen All types of aircraft except B777 Bottle / filling station TMH RD04 Wheel Change Dolly R/I See data sheet TMH RD21 Wheel Brake Trolley - handling See data sheet TMH RD34 Towable Wheel dolly - R/I See data sheet TMH RD54 Aircraft Wheels Transport Dolly A300, A310, A318, A319, A320, A321, A330, A340, A350, A380, B737, B747, B757, B767, B777, B787 TM200 Wheel Lift Airbus & Boeing



LIGHTS (ATA-33)

Landing Light Adjustment Tool

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— F80179-1 Light Adjustment Tool Retractable Boeing 737 all models Landing light G600-330001-1 Tool Wing Landing Light Alignment CL-605 G601R330001-1 Spare Bulbs Kit CRJ200 G601-330001-51 Tool Nose Landing Light Alignment CL-605 G601R334101-1 Alignment Tool - Landing Light CRJ200 G601R334102-1 Alignment Tool - Landing and Taxi Light CRJ200 GSB3340001 Tool inboard landing light alignment Q100 / 200/ 300/ 400 GSB3340002 Tool outboard landing light alignment Q100 / 200/ 300/ 400

G600-330001-1 F80179-1



NAVIGATION (ATA-34)

Breakout Box Equipment - Line Maintenance

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— A34011-1 / -112 B.O.B. Equipment - ARINC 600 737 all models, 767 A34011-119 / -165 B.O.B. Equipment - ARINC 600 767 A34016-xxx B.O.B. Equipment - ARINC 600 737 all models, 767, 777, 787 B34002-xx B.O.B. Equipment - ARINC 404 737 all models G604-340003-1 Kit ARINC 429 Cable CL-605 G601R340002-1 Kit ARINC 429 Cable CRJ200 J34001 B.O.B. Line Maintenance 777 J34002-19 Test Fixture AOA 787

Extender Box - Radio Altimeter Receiver Transmitter

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— C34005-1 Boeing 737 all models, 767, 777 C34005-16 Boeing 737-600/ -700/ -800/ -900, 787



PNEUMATIC (ATA-36)

Pre-cooler Equipment - Removal / Installation

———————————————————————————————————–——– Model Number Application Applicable Aircraft —————————————————————————————————————— A36001-1/-24/-44/-45 Boeing 767 A36022-1 RB211 Boeing 767 C36003-xx LEAP-1B Boeing 737-8 C36004-xx LEAP-1B Boeing 737-8 C36005-1 Boeing 737-8 J36001-102 Trent 800 Boeing 777 J36002-338 PW Engines Boeing 777 J36004-1 PW4084 Boeing 777 J36006-1 GE90 Boeing 777 J36020-1 GE90 Boeing 777



WATER WASTE (ATA-38)

Vacuum Waste System

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— A38001-68 Boeing 737-600 / -700 / -800 / -900, 787 A38001-65 Boeing 787 A38007-9 737-600 to –900, 767, 777, 787 K38001-1 787

Vacuum Toilet - Blockage Removal Tool

————————————————————————————————–—————- Model Number Applicable Aircraft ———————————————————————————————–——————- A38003-20, -30 737-600 to 737-900, 767, 777, 787

Drain Mast Plug - Water Waste

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— C38001-23 Drain Plug Water Waste 737 all models, 767, 777 G601R381002-13 Blanking Plug Drain Mast CRJ200 G601R381001-1 Adapter Potable Water CRJ200 G700-381001-1 Adapter Potable Water Global Express G700-381201-1 Drain Plug Water System Global Express TMH GG16 Water Drain Pump All aircraft

Test Cable - Potable Water Quantity Transmitter

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— A38010-1 Boeing 767, 777 A38010-11 Boeing 737-600 to –900, 767, 777 A38010-45 Boeing 737 all

C38001-23

A38003-20



WATER WASTE (ATA-38)

Vacuum Lavatory System - Tool Blockage Removal

———————————————————————————————————–——– Model Number Applicable Aircraft —————————————————————————————————————— G38004-13 737-600 to –900, 767, 777

Vacuum Waste System - Tool Blockage Removal

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— G38006-1 737-600 to –900, 767, 777



AIRBORNE AUXILIARY POWER (ATA-49)

Cradle APU & Hoist Equipment (Removal & Installation)

———————————————————————————————————–——– Model Number Description Applicable Aircraft —————————————————————————————————————— A49001-83 Cradle APU 757, 767 A49001-84 Cradle APU 757, 767 A49001-17 Cradle APU 757, 767 A49003-12 Transportation Dolly - APU 757, 767 A49005-12 Sling APU Shop Handling 757, 767 C49003-1 Cradle APU Sundstrand - Hoist 737 C49004-36 Sling APU - 737 GTCP85-129 Garrett GTCP 36-280 Garrett APS 2000 Sundstrand C49004-37 Sling APU - 737 GTCP 85-129 Garrett APS 2000 Sundstrand C49004-38 Sling APU - GTCP 36-280 Garrett 737 C49004-39 Sling APU - APS 2000 Sundstrand 737 C49004-40 Sling APU - 131-9B Allied Signal 737 C49010-50 Cradle Assembly - AE 131-9B APU 737-600 to –900 C49012-1 Equipment - Removal & Installation Exhaust 737-8 G600-490002-1 Sling APU - Removal & Installation CL-600 G601R491001-1 Sling APU - Removal & Installation CRJ G604-490001-77 Sling APU - Removal & Installation CL-605 F80002-24 Cradle & Hoisting Ass’y - APU 737 F80114-25 Cradle & Hoisting - Garrett APU 737 J49006-67 Cradle APU 777 J49007-29 Dolly Transportation APU 777 K49004-1 Hoist Equipment - Inst’l / Removal 787 TMH RD45-00-00 APU Transport Dolly A319/ A320 / A321 TMH SD59-00-00 APU Removal / Installation Dolly A330 / A340 TMH SD70-00-00 APU Maintenance Dolly C135



AIRBORNE AUXILIARY POWER (ATA-49)

Lifting Eye - Generators & Starters

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— A49002-1 757, 767-200 & 767-300 (Helicoil Inserts) A49002-2 757, 767-200/-300/-400, 737-600 to –900, 777, 787 (Stainless steel Armored Inserts)

Thread Protectors - APU

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— C49006-1 Thread Protector - APU Mount Bolts 737-600 to –900 G49007- 5 Thread Protector - APU Retention Bolts 747, 777 K49001-7 Thread Protector - APU Retention Bolts 787



DOORS (ATA-52)

Door Seal Installation Tool

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— B52004-1 707, 727, 737 all models, 747, 757, 767 K52011-1 787

Various Tools - See Aircraft Specific ITEM)



NACELLES (ATA-54)

Sling Equipment

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— ACS87002-1 Sling - Inlet Cowl CRJ700 / 900 A54003-1 Sling - Strut Removal & installation P&W Engine 767 A54003-41 Sling - Strut Removal & Installation GE CF6-80A Engine 767 A54003-42 Sling - Strut Removal & Installation GE CF6-80C2 Engine 767 A54012-1 Sling - Strut Removal & Installation RR RB211-524H Engine 767 B71040-39 Sling - Inlet Cowl CFM56-7 737-600 to –900 RB211-524G & RB211-524H 747 RB211-535C & RB211-535E4 757 RB211-524H 767 C54001-37 Sling - Strut Removal & Installation 737-300/ -400/ -500 C54011-59 Sling - Strut Removal & Installation GE CFM56-7 Engine 737-600 to –900 C54016-xx Sling - Strut Removal & Installation CFM LEAP Engine 737-8 C54019-xx Sling - Fuse Pin R/I CFM56-7 737-8 C54021-xx Sling - Fuse Pin R/I LEAP 737-8 G600-540001-1 Sling - Nose Cowl Removal & Installation CL-605 G601R541101-1 Sling - Nose Cowl Removal & Installation CL-605 / CRJ J54002-85 Sling - Strut Removal & Installation PW Engine 777 J54003-1 Sling - Strut Removal & installation GE Engine 777 J54003-2 Sling - Strut Removal & Installation RR Engine 777 K54004-43 Sling - Installation / Removal Engine Pylon 787



STABILIZER (ATA-55)

Sling Equipment

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— A07007-33 Vertical Fin Installation & Removal 767 C27003-38 Rudder Installation & Removal 737-200, 737-300 to –500 C55001-1 Elevator Installation & Removal 737-200 / -300 C55004-1 Vertical Fin Installation & Removal 737-100 to –500 C55010-1 Vertical Fin Installation & Removal 737 all Models C55010-56 Vertical Fin Installation & Removal 737-8 C55014-1 Horizontal Stab. Installation & Removal 737-8 F70172-1 Horizontal Stab. Installation& Removal 707 S/N 2001 + F70172-2 Horizontal Stab. Installation & Removal 707 S/N 1 to 1999 F70298-1 Vertical Fin Installation & Removal 707 F70307-1 Elevator Installation & Removal 707, 720 F80006-1 Horizontal Stab. Installation & Removal 737-100 / -200 F80006-2 Horizontal Stab. Installation & Removal 737-100 / -200 F80006-51 Horizontal Stab. Installation & Removal 737-100 / -200 F80006-52 Horizontal Stab. Installation & Removal 737-300 / -400 / -500 F80006-54 Horizontal Stab. Installation & Removal 737-300 / -400 / -500 F80006-67 Horizontal Stab. Installation & Removal 737-100 / -200 F80025-30 Rudder Installation & Removal 737-100 / -200 F80035-18 Vertical tail installation & Removal 737-200/ -300/ -400/ -500 G601R551000-1 Horizontal Stab. Installation & Removal CRJ G670-274001-101 Horizontal Stab. Installation & Removal CRJ700 J55004-1 Horizontal Stab. Installation & Removal 777 J55005-1 Vertical Fin Installation & Removal 777-200/ -300 J55005-32 Vertical Fin Installation & Removal 777-200/ -300/ -200LR/-200F/ 777-300ER K55001-1, -55 Horizontal Stab. Installation & Removal 787 K55005-1, -87 Vertical Fin installation & Removal 787

C55010-33



WINDOWS (ATA-56)

Sling Equipment

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— A56001-15 Sling set - # 1 & 3 Control Cabin Windows 757-200, 767 G600-561101-1 Windshield & Side Window Removal CL-600/ 604/ 605 Global Express G601R561102-1 Windshield & Side Window Removal CRJ/ CRJ700/ CRJ900 K56001-38 Sling Set - # 1 & 2 Control Cabin Windows 787

G600-561101-1 K56001-38



WINGS (ATA-57) CONTOUR BOARDS

Flap Profile Check Board

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— G600-570019-1 CL-600 G700-575101-1 Global Express

Winglet

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— C57002-xx B737-8 Sling Equipment R/I Winglet C57006-1 B737-8 Holding Fixture Winglet

Wing Leading Edge

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— TN059536 Lear 23, 24, 25, 28, 31, 35, 55 TN455401 Lear 40, 45 TN504699 Lear 23 to 60XR



PROPELLERS (ATA-61)

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— TMH BS12-00-00 Blade Lifter (same as GS20871-1) ATR42/72 (valid only for “14SF” type ) TMH SD18 Transport storage Dolly R/I Blades ATR42/72 Propeller support PW120 / 124 TMH SD38 Transport storage dolly R/I Blades ATR42/72 Propeller support PW120 / 124



POWER PLANT (ATA-71)

Engine Lifting Slings

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— ACS87002-1 Sling - Inlet Cowl CF34-8C5 CRJ700 / 900 B71040-39 Sling - Inlet Cowl - - - - - - - - - - CFM56-7 737-600 to –900 RB211-524G & RB211-524H 747 RB211-535C & RB211-535E4 757 RB211-524H 767 A01-1133-1 Sling Engine Power Plant - GE CF-34-8C5 CRJ700/900 A71008-64 Sling Equipment - PW JT9D-7R4D Engine 767 A71008-65 Sling Equipment - PW4000 Engine 747, 767 C71004-1 Sling - Inlet Cowl GE CFM56-3 737-300/-400/-500 C71015-83 Sling Engine - Overhead Shop Handling - - - - - - - - - - - GE CFM56-3 737-300/-400/-500 GE CFM56-7 737-600 to –900 C71026-1 Sling - Fan Cowl GE CFM56-7 Engine 737-600/-700/-800 C71027-1 Frame Equipment. - Inlet Cowl 737-600 to –900 C71031-1 Sling Assembly—Fan Cowl, LEAP-1B 737-8 C71033-xx Installation / Removal Frame Assembly Inlet Cowl 737-8 C71039-xx Engine Sling Equipment - Overhead Shop 737-8 C71041-xx Unlock Pole - Fan Cowl Hold Open Rod 737-8 G601-710008-157 Sling Engine Power Plant - CF34 CRJ/ CL604/ CL605 G215-710021-1 Sling Engine (Tilt-Arc) CL-215 G71007-28 Sling - Inlet Cowl GE CF6-80C2B 747-300/-400, 767-200ER 767-300 / 767-300ER G71010-79 Sling Engine Handling GE CF6-80A & CF6-80C2B 747, 767 G71010-80 Sling Engine Handling GE CF6-80C2B 747, 767 G71010-81 Sling Engine Handling GE CF6-80A 767 G71010-82 Sling Engine Handling GE CF6-50 747 G71013-1 Sling - Fan Cowl GE CF6-80C2B 747 G71030-1 Sling - Nose Cowl R.R RB211-524 & GE CF6-50 747, 767-300ER G71032-1 Sling - Inlet Cowl R.R. RB211-524 & GE CF6-50 747, 767 J71001-66 Sling - Inlet Cowl - PW, RR, GE Engines 777, 787 J71004-9 Sling - Fan Cowl - PW, RR, GE Engines 777 J71015-18 Sling - Fan Cowl Support Beam PW & GE90 777 K71008-37 Sling - Fan Cowl Support Beam GE GENx 787 K71009-36 Sling - Fan Cowl RR Engines 787 K71009-41 Sling - Fan Cowl GE Engines 787 TMH BS09 Sling - Inlet & Fan Cowl CFM56 A320 TMH BS29-00-00 Sling - R/I Mixer CFM52-5C See OEM Item TMH BS31-00-00 Sling - Engine Handling CFM56-5 & V2500 A320




Bootstrap Lifting Device - Engine Installation & Removal Used to install and remove the engine / power plant.

————————————————————————————————–————— Model Number Applicable Engine Applicable Aircraft ————————————————————————————————–————— A1-24001-1 GE CF-34 CRJ TMH BS01 see data sheet A300 / A310 TMH BS02-00-00 PW120 / PW124 / PW125 ATR42 / 72 A71001-191 PW JT9D-7R4D 767 PW4056-4060 A71011-262 GE CF6-80A 767 A71011-263 GE CF6-80C2B 767 A71047-150 RR RB211-524H 767 C71003-247 GE CFM56-3 737-300/ -400/ -500 C71020-91 GE CFM56-7 737-600/ -700/ -800/ -900 C71029-xx LEAP-1B 737-8 C71030-1 Fixture Proof Load - LEAP-1B 737-8 J71005-73/ 74/ 84/ 85 PW Engine 777 G71029-90 RR RB211 747 J71009-68 / -69 RR Trent 800 777 J71043-89 GE GE90 777 K71001-143 GE GEnx 787 K71002-116 /-141 RR Trent 1000 787 CG9000033-0001 PW 1500-G CS100 / CS300




Utility Crane & Engine Installation / Removal A01-1784-1 The DCM mobile crane has been designed to remove and install engines on any Regional Jet or busi-ness aircraft. Its manoeuvrability and ease of operation allow for more efficient aircraft maintenance. The legs of the crane surround the transporter stand during engine pick-up, thus saving working space. The boom of the crane can be lowered to facilitate transportation on a flat bed truck.

STANDARD FEATURES

Model : DCM A01-1784 Rated Capacity: 3,080 Lbs. @ 22 Feet Max. Mobile unit: 24 Volts DC / 510 AMP Rechargeable Battery Mobile Unit : «EE Rated » Gross Weight : 4,500 Lbs. Casters 10 Inch dia.: With lock and brake (4) Maximum speed: 3 MPH.

DIMENSIONS

Height Boom Up: 26 feet Height Boom down: 115 inches Width: 107 inches Length Boom down: 350 inches Distance between (2) legs: 90 inches Depth between (2) legs: 112 inches

HOIST:

Manufacturer: Vulcan (Modified by DCM) Model: A01-1784-440 Chain Length: 25 feet Speed of the hoist: Variable 0-8 feet /

min. Transversal displacement: +/- 6” Longitudinal displacement: +/- 6”

MOBILE UNIT

Model: Crown TR3560 (Modified)

Batteries (Rechargeable) 24 volts DC; 510 AMP.

Consuming time : 5 hours (continuous use)

Charging time: 8 hours Cooling time: 4 hours Certified: EE Rated Travel speeds “Loaded”: 3 mph. Battery charger: Include




Engine Stand & Engine Cradle

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— C71008 Engine Cradle / Dolly GE CFM56-3 737-300/ -400/ -500 A71006-79 Engine Cradle - Pratt & Whitney, JT9D-7R4D 767 PW4056 767 PW4256 747-400 A71023-53 Engine Cradle - GE CF6-80A, 90 inch rail 767 F80062-55 Transportation / Assembly Dolly - JT8D 737 G215-710009-1 Engine Dolly - (CL-215 Only) CL-215 G601-710004-101 Stand Engine Power Plant Transportation CF34 CRJ / CL604 / CL605 G601-710006-101 Stand Engine Power Plant build up CF-34 CRJ / CL604 / CL605 G601-710007-101 Stand Engine Power Plant Rest CF-34 CRJ / CL604 / CL605 G71002-48 Engine Cradle - GE CF6-80C2B 747, 767 G71015-75 Engine Cradle - RB211-524G & RB211-524H 747, 767 TMH EC03-00-00 Engine Cradle - PW120 series ATR42/72 TMH EC05-00-00 Engine Cradle - CFM56-5C2 A340-200 / A340-300 TMH EC07 Engine Cradle - CF6-80C2 / E1, 90 inch rail A300 / A310 / A330 Associated to TMH ET06-20-00 & TMH ET06-10-00 TMH EC08-00-00 Engine Cradle - CF6-80C2, 90 inch rail - I Beam A300/ A310 TMH EC11 Engine Cradle - PW4168, 90 inch rail - I Beam A330 TMH EC14 Engine Cradle - CF6-50, 90 inch rail - I Beam A300 TMH EC17 Engine Cradle - Trent 700, 118 inch rail A330 TMH EC22 Engine Cradle - 90 inch I Beam See Data sheet JT9D-7 All series & PW4000 All series




Engine Stand & Engine Cradle

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— TMH EC27 Engine Cradle - CFM56-3 B737-300 to -B737-500 CFM56-5 (-5A/ -5B/ -5C) A318/ A319/ A320/ A321/ A340 IAE V2500 A319/ A320 / A321 TMH EC28 Engine Cradle - CFM56-5, 90 inch I Beam A318/ A319/ A320/ A321 TMH EC29 Engine Cradle - IAE V2500, 90 inch standard A320 Associated to TMH ET06-10-00 & TMH ET06-20-00 TMH EC37-00-00 Engine Cradle - Rolls Royce Trent 500 A340 TMH EC37-00-00 Engine Cradle - Rolls Royce Trent 700 A330 TMH ET06 Engine Trolley - 90 inch rail - Associated engines Cradles - TMH EC05, EC07, EC10, EC11, EC12, EC13, EC28, EC29 TMH ET07 Engine Trolley - Suitable for all I Beam 90 inch cradles / adapters TMH ET07-10-00 - Single Steering TMH ET07-20-00 - Double Steering TMH ET09 Fly Away Stand - Suitable I Beam 90 inch cradle / adapters (Engine Transportation / Engine Storage) TMH ET10 Engine Trolley - Suitable for all “I” beam 118 inch cradle / adapters Trent 700 Engine (Engine Ground Transportation / Storage) TMH ET10-50-00 - Double Steering TMH ET10-60-00 - Single Steering TMH ET13 Engine Trolley - Suitable for all “I” Beam 118 inch cradle / adapters Trent 700 Engine (Engine Ground Transportation / Storage) TMH SD16 Working Stand - CFM56 Engine TMH SD53-00-00 Inlet Dolly - C135 AWACS TMH SD69 R/I of Nozzle & Center Body - CFM56-5A/5B A318/ A319/ A320/ A321




Lift Fixture Engine Accessory Model # A71015-108 Use on Aircraft Models: Boeing 737-600 to –900 Boeing 747 Boeing 757 Boeing 767 Boeing 787

USAGE To support engine accessories in conjunction with the following adapters: RB211 & CF6-50 USE 2ME65B89603 757/767 use A71013 for IDG except 767-400 JT9D-3 & -7 USE 69ME65B00713 747/767 use A78003 for exhaust nozzle. JT9D-7Q USE 69ME65B00713 Plus 757/767 use A21001 for A/C Pack and heat PWA28941 (Fuel Pump / Control) exchanger. 737 Use C21005 for A/C Pack. Weight And Dimensions: Weight (Excluding Box) : 400 lbs. Dimensions (Excluding Box): 30” x 50” x 90”




Dynamometer - Load Cell

————————————————————————————————–————— Model Number Description ————————————————————————————————–————— 30006-0050 5000 lbs Capacity; 5” dial 30006-0068 6000 Lbs Capacity; 5” dial 30006-0092 15000 lbs Capacity; 5” dial 30007-0042 4000 lbs Capacity; 10” dial 30007-0059 5000 lbs Capacity; 10” dial 30007-0125 2000 KG Capacity; 10” dial 30784-0017 30000 lbs Capacity; 10” dial

Engine Rotation Tool Usage: Used for an accurately controlled rotation of the engine compressor/turbine during boroscopic checking.

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— TMH DI27 Engine Rotation Tool See Data sheet

ENGINE ROTATION TOOL (ATA-72)



EXHAUST (ATA-78)

Hand Pump - Opening system Thrust Reverser To supply hydraulic pressure to the actuator that opens the thrust reverser “C” ducts for engine maintenance.

————————————————————————————————–————— Model Number Applicable Aircraft ————————————————————————————————–————— A78019-29 737-300 to –900, 747, 757, 767 (Except RB211) , 777 GE90 (with Custom Option # 7200-000482), 787 (Genx & Trent 1000) C78005-26 / -53 737-300 to –900, *** 747 (CF6 & PW4000 engines only), 757, 767, 787 DCM1493 / (AM1986) ERJ170 / 175 / 190 / 195 TMH GA13-20-00 Cowl Door Opening Unit TMH GA17-10-00 Cowl Door Opening Unit - Tank Capacity 1 L TMH GA17-20-00 Cowl Door Opening Unit - Tank Capacity 4 L TMH GA17-30-00 Cowl Door Opening Unit - Tank Capacity 10 L

TMH GA17 TMH GA13-20-00



EXHAUST (ATA-78)

Hold Open Equipment Thrust Reverser Used to hold open the Trust Reverser during engine maintenance.

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— C78001-13 Hold Open Rod - CFM56-3 Engine T/R 737-300 C78012-14 Hold Open Rod - CFM56-3 T/R Cowl 737-300/ 400/ 500 (See ITEM for 737-300 applicable notes) C78019-15 Hold Open Eqpt. - CFM56-7 T/R Cowl 737-600 to –900 C78031-1 Hold Open Eqpt. - LEAP-1B T/R Cowl 737-8 C78033-xx Hold Open Eqpt. - LEAP-1B T/R Cowl 737-8 G78002-1 Hold Open Set - CF6-80C2B T/R Cowl 747 / 767 K78005-22 Hold Open Eqpt. - RR Thrust Reverser 787 K78009-1 Hold Open Eqpt. - GE Thrust Reverser 787 TMH TRSV.01F78AH Hold Open Rod - Trent 500 A340-500 / -600 CG9000051-0001 Hold Open Device - T/R CS100/ CS300

Brace Hold Open

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— TMH BS10 Brace Hold Open Cowls CFM56-5 A318/ A319/ A320 / A321 - CEO TMH BS10-10-00 Brace Hold Open Cowls CFM56-5 A320 This tool replaces S587BHO, S587-1BHO, S587-2BHO TMH BS13-00-00 Brace Hold Open Cowls -V2500 A320 TMH BS17-00-00 Brace Hold Open Cowls - CFM56 A340 TMH BS19 Brace Hold Open Cowls - CF6-80E1 A330 TMH BS58 Brace Hold Open Cowls - CF6-80C2 A300 / A310 This tool supersedes 98A71101506001 TMH TRSV.01F71AC Brace Hold Open - Trent 500 A340-500/ -600



STARTING(ATA-80)

————————————————————————————————–————— Model Number Description Applicable Aircraft ————————————————————————————————–————— G1008011029-001 Air Start Adapter - GSE CL-300 15MIT65B00717 Wrench - Pylon Valve manual drive 747 G71021-16 Drive Extension - Starter Valve and 767 Pressure Regulating & Shutoff Valve

G71021-16



Worldwide Licensed Manufacturer - GSE.

————————————————————————————————–————— Aircraft Models Description ————————————————————————————————–————— Challenger All Bombardier Proprietary GSE Global Express All Bombardier Proprietary GSE CRJ All Bombardier Proprietary GSE CRJ Next Gen All Bombardier Proprietary GSE Q Series All DeHavilland Proprietary GSE C Series All Bombardier Proprietary GSE Amphibious Aircraft All Bombardier Proprietary GSE



C Series CS100 - CS300

————————————————————————————————–————— Part Number Description ————————————————————————————————–————— CG9000023-0001 Kit Hydraulic Fluid Sampling CG9000024-0001 Water Waste Tank Removal SGSE CG9000029-0001 HSTA Hoisting Bracket CG9000030-0001 T/R Hold Open Rod Assembly CG9000031-0001 Aft Equipment Bay Platform - Interior CG9000032-0001 Escape Slide Protection Mats CG9000033-0001 Engine Bootstrap kit CG9000034-0001 Picketing Kit CG9000036-0001 Mid– Avionic Boxes Removal Kit CG9000037-0001 EPC Removal / Installation Tool CG9000038-0001 Fuel Inerting Kit CG9000039-0001 Decode ELT Signals CG9000040-0001 Fidex Lifting Adaptor CG9000041-0001 Fishnet SGSE CG9000043-0001 Kit NLG Door Rigging CG9000044-0001 Fidex Test Kit CG9000045-0001 IRS Alignment Kit CG9000047-0001 Fuel Lines Pressure and Obstruction Kit (Not Supplier provided) CG9000050-0001 Wheel Bin Removal GSE CG9000051-0001 T/R Primary Hold Open Device CG9000053-0001 T/R Hold open Shop Air Bootstrap CG9000054-0001 Jacking Pad Kit CG9000054-0007 Jacking Pads - Nose CG9000054-0009 Jacking Pads - Wing CG9000055-0001 Flap Hinge Bushing Tooling CG9000056-0001 Cover - Fuel Drain Mast CG9000057-0001 NACA Plugs - ECS Intake CG9000058-0001 NACA Plugs CG9000059-0001 Plug - ESC Exhaust CG9000060-0001 HP Pipe Leakage Tester (June 2015) CG9000061-0001 Cover - MLG Wheel Assembly CG9000062-0001 Cover - NLG Wheel Assembly CG9000063-0001 Tool Fuel Drain Valve Removal CG9000064-0001 Kit - Fuel / Vent Lines Shroud Leak Test CG9000065-0001 Kit - Leak Test Shroud and drain Lines CG9000066-0001 Fire Loop Removal / Installation Tool CG9000069-0001 Cover - TAT CG9000070-0001 Fuel Vent Blanking Plug



C Series CS100 - CS300

————————————————————————————————–————— Part Number Description ————————————————————————————————–————— CG9000071-0001 Cover - Louver Panels CG9000072-0001 Cover - Case Drain Guide Vane CG9000074-0001 Pylon Removal / Installation Sling CG9000095-0001 Kit Rudder Rigging CG9000096-0001 Kit Rigging Pin CG9000099-0001 Elevator Pointer Kit G600-200014-17 Bonding Equipment Tester (120V) G600-200014-19 Bonding Equipment Tester (230V) G601R280001-1 Kit - Breathing Apparatus G601R284102-1 Kit - Hydrometer and Cylinder C01518150-RFIX02-0001 Door Mechanism Rigging Pin C01518150-TFIX01-0001 Fixture, Rigging PAX Door Mechanism C01518150-TFIX04-0001 Inner Handle Load Adapter C01518150-TFIX05-0001 Adapter Handle Mode select C01550000-TFIX01-0001 Fixture Rigging Mechanism Cargo Door C01570000-RFIX03-0001 Fixture Shaft Cam Rigging C01570000-RFIX04-0001 Fixture Rigging Mechanism Oweed C01570000-TFIX01-0001 Mechanism Rigging Fixture C01570000-TFIX03 Fixture Rigging Mechanism Oweed C01570000-TFIX05-0001 Mechanism Rigging Fixture C02040910-SFIX01-0001 Tool Horizontal Stab Holding C500-522111-TFIX01-0001 Oweed Dummy Actuator GT9910014-GT0001-0010 Spring Compressor FPD - FSD - ASD- Doors GT9910014-GT0001-0015 Spring Compressor FPD- FSD - ASD Doors GT9910014-GT0001-0020 Spring Compressor FPD - FSD - ASD Doors GT9910014-GT0001-0025 Spring Compressor FPD - FSD - ASD Doors GT9910014-GT0001-0030 Spring Compressor FPD - FSD - ASD Doors GT9910014-GT0001-0035 Spring Compressor FPD - FSD - ASD Doors GT9910014-GT0001-0040 Spring Compressor FPD - FSD - ASD Doors GT9910014-GT0001-0045 Spring Compressor GT9910014-GT0001-0050 Spring Compressor GT9910014-GT0001-0055 Spring Compressor GT9910014-GT0001-0060 Spring Compressor GT9910014-GT0001-0065 Spring Compressor S500-213001-TFIX03-0001 Pressuziration Blanking Kit S500-271011-TFIX01-0001 Aileron Backlash Arm S500-272011-TFIX01 Rudder Backlash Bar S500-273011-TFIX01-0001 Backlash Check Tool S500-344311-TFX01-0001 Attenuator TSS Antenna S500-345011-TFIX01-0001 LOC Antenna Attenuator



Q SERIES Dash 8 - Q400

————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— DCM1176-1 Covers Main Wheel (Canvas) Option for 34 inch wheels DCM1177-1 Covers Nose Wheel (Canvas) ACS28001 Cover Engine Intake (DCM1178-1 / 8SC5016)) ACS28002 Cover Engine Exhaust (8SC5017) ACS28001 Sling Lower Forward Cowl ACS28004 Sling Forward Cowl ACS28005 Stand Lower Forward Cowl Support / Transport ACS28009 Hoist Lower Fower Cowl ACS28010 Plug / Bung Oil Cooler Vent Scoop ACS28013 Tool Oil Cooler Thermal Valve Removal ACS28016 Lanyard Lower Forward Cowl AOA100 Cover Angle of Attack Vane G601R121605-1 Gaseous Test Panel G601R324301-1 Kit Brake Bleeding GSB0700007 Adapter Jack Pad GSB0700017 Adapter Jack Pad - Wing GSB0800001 Plumb Bob Leveling Aircraft GSB0800003 Adapter Main Wheel Measuring GSB0910008 Strap Towing Aircraft Recovery




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— GSB1000001 Warning Streamer (G601R100001-1) - Remove After Test GSB1000002 Warning Streamer (G601R100001-2) - Remove Before Flight GSB1000004 Wheel Chocks MLG & NLG GSB1000018 Flashlight with batteries GSB1000020 Pin NLG Ground Lock Door GSB1000027 Flyaway Kit (Basic) GSB1000028 Pin MLG Ground Lock Door GSB1000029 Pin MLG Ground Lock GSB1000031 Set Propeller Restraint GSB1000032 Flyaway Kit - (APU Option) GSB1000033 Covers Pitot Static GSB1011007 Cover ECS Exhaust (Left & Right) Ref. 8SC5014-001 & 8SC5014-002 GSB1011008 Cover ECS Ram Air Duct (L/H) Ref. 8SC5013-001 GSB1011009 Cover ECS Ram Air Duct (R/H) Ref 8SC5013-002 GSB1210016 Strut Service Gauge GSB1216005 Tool Tire Deflation GSB1216008 Gauge Tire Servicing GSB2000009 Digital Inclinometer GSB2000016 Kit Optical Depth Micrometer




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— GSB2100006 Vacuum Pump GSB2111004 Kit Techne Fluidized Bath (117V or 240V) GSB2130002 Hose - Outflow Valve Test GSB2700008 Kit Rigging Pin GSB2700009 Tension Meter for Cables (20-200LBS) GSB2715001 Tool Left Gear Tab Rigging GSB2715002 Tool Right Gear Tab Rigging GSB2715003 Tool Left Elevator Rigging GSB2715004 Tool Right Elevator Rigging GSB2715005 Tool Aileron Rigging GSB2720001 Rudder Pedal Force Meter Fixture GSB2733002 Rigging Fixture Control Column GSB2733003 AOA Vane Rigging GSB2750003 Flap Drive Adaptor GSB2810001 Tool Fuel Drain Valve GSB3240006 Tool Force Application IM563 Socket NLG Axle Nut IM963 Socket MLG Axle Nut GSB3242004 Spin Up Tool




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— GSB3251006 Protractor NLG Steering Angle GSB3340001 Tool Inboard Landing Light Alignment GSB3340002 Tool Outboard Landing Light Alingment GSB3351001 T Light Comparator GSB3443003 Radio Altimeter Simulator GSB5200001 Rigging Tool L/H AFT Baggage Door Latch GSB5200002 Rigging Tool R/H AFT Baggage Door Latch GSB5260001 Tool Airstair Door Gas Spring Installation GSB5400001 Bar Pry GSB7610003 Tool - PLA Rigging



EMBRAER Phenom 300 GSE Worldwide Licensed Manufacturer

————————————————————————————————–————— Model Number Description ————————————————————————————————–————— AGE-05315-401 Adapters - MEAS Horizontal Tail Backlash AGE-05271-401 Clamp Set Locking Control Surface AGE-05422-401 Pins, Set Aircraft Cables Rigging AGE-05468-401 Balancer Set Control Surface AGE-05204-401 Straight Edge Symmetry Aircraft AGE-05416-401 Device Pressure Test Brake 2317-S137-001 Wow Proximity Sensor Adjustment Device AGE-05190-401 Extender Cards Set AGE-05122-401 Protractor Control Surface Deflection AGE-04890-401 Adapters - Set Jacking Aircraft 2317-T020-401 Jacking Device NLG Assembly 2117-T010-401 Locking Stay Installation Device Assembly 2617-T001-401 Free Fall System Rig 2317-T010-401 Pin Removal Device MLG AGE-04914-401 Tow Bar Head AGE-05491-401 Harness Assembly Stick Pusher Actuator



Worldwide Licensed Manufacturer - GSE

————————————————————————————————–————— Aircraft Models ————————————————————————————————–————— Boeing 737 Boeing 737MAX Boeing 747 Boeing 767 Boeing 777 Boeing 787 Out of Production models Boeing 707 Boeing 717 Boeing 727 Boeing 757 Douglas DC-8 Douglas DC-9 Douglas DC-10 McDonnell Douglas MD-11 McDonnell Douglas MD-80 McDonnell Douglas MD-90



Boeing 737-8 (Tools unique to) Worldwide Licensed Manufacturer - GSE

————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— C10005-1 Cover, Engine Inlet - LEAP 1B C10006-1 Plug EQPT - Engine Exhaust, LEAP-1B C10007-1 PLUG EQPT - FAN REVERSER C10008*** Mooring Equipment for NLG R10009 *** Plug - APU Port, Assembly C20004*** Boom Hoist - Engine Fire Bottle J20009-50 Adapter - Load Positioner F70207-151 Kit, Rigging Pins C26008*** Installation/Removal Equipment - Cargo Fire Extinguisher Bottle C26009*** Installation/Removal Equipment - Engine Fire Extinguisher Bottle C26007*** Test Equipment - Compartment Overheat Detection Control, M237 Inline C26010*** Cover - Warning Horn, APU Fire Detection C27034-31 Sling Equipment - Elevator Removal/Installation C27083-18 Rigging Bar - Elevator Tab C27086-27 Spring Removal / Installation Equipment - Elevator Tab Mechanism Assy C27091*** Lock Set - Flight Spoiler Actuator (Contains 8 Lock Assemblies) C27095 *** Rigging Tool - Four Degree Speedbrake Lever Tool C27092 *** Rigging Beam - Elevator Index Plate Installation F80027 *** Lock Assembly - Horizontal Stabilizer C32026 *** Downlock Equipment - NLG and MLG * Flyaway Equipment * (Contains 3 Lock Assemblies) C32055 *** Clamp Assy - Steering Cables, NLG C32015-18 Puller Equipment - Fuse Pin, MLG Forward Trunnion Support C32041-67 BUILDUP EQPT - NLG C32054 *** Rmvl/Instl Equipment - Trunnion Pin, NLG C36005-1 Sling - Precooler C36006*** Test Equipment - Air Supply Control System C36003*** Equipment - Removal/Installation, LEAP-1B Engine Precooler - Engine Off C36004*** Equipment - Removal/Installation, LEAP-1B Engine Precooler - Engine On J46002-16 Breakout Box - ARINC-600 Connector, Fiber Optic J46002-17 Breakout Box - ARINC-600 Connector, Fiber Optic C49012-1 Equipment - Instl/Removal, APU Exhaust C53002-1 Removal and Installation Equipment - Tail Cone C54016*** Rmvl/Instl Equipment - Engine Strut, CFM LEAP C54017*** Aft Fairing - Removal & Installation C54018-1 Alignment Equip - Eccentric Bushing, Engine Strut Side Link C54019*** Sling Equipment - Fuse Pin R/I, CFM56-7 C54021*** Sling Eqpt - Fuse Pin Removal, CFM LEAP, Preload/Unload C54022*** Rmvl / Instl - Fuse Pin C55010-56 Sling Equipment - Vertical Fin



Boeing 737-8 (Tools unique to) Worldwide Licensed Manufacturer - GSE

————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— C55014-1 Sling Equipment - Horizontal Stabilizer, Removal/Instl C57002 *** Sling Equipment - Removal/Installation, Winglet C57007 *** Dispatch Tool - Cover Plate, Winglet Lower Blade C57006-1 Holding Fixture - Winglet C71029 *** Bootstrap Equipment - LEAP-1B Engine C71031-1 Sling Assembly - Fan Cowl, LEAP-1B Engine C71032 *** Safety Screen - Personnel Barrier, LEAP-1B Inlet C71033 *** Installation/Removal Frame Assembly - Inlet Cowl C71035-1 Lanyard - Personnel Safety, Engine Maintenance C71037-1 Support - Engine Anti-Ice Duct, LEAP-1B C71038-1 Alignment / Thread Protector Equipment - Thrust Link C71040*** Equipment - Torque, Engine Mount Bolts, LEAP-1B engine C71041 *** Unlock Pole - Fan Cowl Hold Open Rods C71036 *** Brace - Transportation, LEAP-1B Engine Forward/Aft Mounts C20002 *** Hoist - Boom, Ground Based Thrust Reverser C78031-1 Equipment - Hold Open, Thrust Reverser Cowl, 65 Degree C78032-1 Equipment - Sling, Thrust Reverser, LEAP-1B C78033 *** Equipment - Hold Open, Thrust Reverser Cowl, LEAP-1B C78035-1 Assembly - Lock, Thrust Reverser Actuator, LEAP-1B (Contains 2 Locks) C78036 *** Dolly - Thrust Reverser C78037 *** Tool - Latching, Thrust Reverser C-Duct Halves C78030-10 Gap Measurement Gauge - TRAS Locking Actuator C78025 *** Tool - Thrust Reverser Actuator, Removal/Installation C78034 *** Sling Equipment - Thrust Reverser Sleeve, LEAP-1B Engine C71039 *** Engine Sling Equipment - Overhead Shop Handling C71030-1 Fixture - Proofload, LEAP-1B Bootstrap C07008-28 Restraint Equipment - Inboard and Outboard Trailing Edge Flap Tracks ***Recovery***



Boeing 787 Worldwide Licensed Manufacturer - GSE

————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— A09003-2 Lock Pin—Nose Gear Towing Lever A10002-9 Pole—Removal / Installation, Pitot Static Probe Cover A12001-15 Fuel Sampling Equipment A20001-65 Long Hoist arm Ass’y A20001-152 Boom Hoist Equipment—(400 lbs Capacity) A20001-83 Short Hoist Arm Ass’y A20006-32 Grommet Installation Set A20011-76 / -141 Bushing Removal / Installation Kit—Landing Gear A20012-10 / -11 Swatool Tool—Bearing A21010-190 Vacuum tank—Pressure Relief Valve Test A27092-110 Actuator / Deactuator Set - Proximity sensor A27124-1 Force Equipment—Rudder Freeplay check A32015-9 Installation / Removal Tool—Down Lock, MLG & NLG A32066-1 Drain Equipment—Shock Strut, MLG & NLG A32099-76 Spring Extender Equipment A34001-4 Warning Equipment - (ATC), (DME), (VHF) Antenna and Drain Mast A34016-2, -5, -8, -9, -21 Breakout Box Equipment - ARINC 600 Line Maintenance -26, -35, -38, -42, -46-47, -59, -64, -180, -181-182, -183, -184, -185-186, -187, -188, -189 A38001-65, -68 Vacuum Test Equipment - Vacuum Waster System A38003-20, -30 Blockage Remover - Vacuum Toilet A38006-1 Tester - Toilet Vacuum A38007-9 Plug—Vacuum Waste System A38012-85, -86 Pump Equipment—Vacuum Lavatory System A49002-2 Lifting Eye—Generators and Starters (CE) A51002-1 Alignment Equipment - Airplane Structural repair A52019-13 Driver Set - Hinge Pins, Large Cargo Door A52020-1 Mandrel Equipment—Bearing Installation A71015-108 Lift Fixture—Engine Accessory A78019-29 Hand Pump - Opening System, thrust Reverser B20004-21, -42 Leverage Adapter Equipment—Access Panel B28005-27, -42 Pressure Plug Equipment - Fuel System B32066-1 Roller Swaging and Removal Equipment—Bearing B32070-1 Installation Kit—Bushings, NLG C10004-1 Protective Cover—Vane Sensor AOA C20001-1 Roller Swage—Bearing Installation, Elevator Tab Control Crank Ass’y C28013-8 Protective Equipment - Protective Ring for wing Lower Panel Access Doors C32009-1 Swaging Equipment—Oversize Nose Gear Bearing, Upper Drag Brace C34005-16 Extender Box - Radio Altimeter Receiver Transmitter C35001-27 Pressure Leak Test Equipment—Crew Oxygen System F70199-25, -52 Inflation Tool - Tire F70200-14, -18 Inflation Tool - Strut F70284-1 Wear Gage Set - Ground Power Plug and Receptacle F70328-1 Probe - Film Resistance Measuring F71329 Leakage Tracing Device - Integral Tank Leakage Test




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— F72951-1 Water Manometer - Test Equipment F80113-37, -50, -61, -64 Kit Roller Swage -70, -88, -105 F80117-1, -10 Swage Assembly—Roller F80118-1, -15, -27, -31 Kit Bearing Retention / Removal -38, -42 F80205-1 Bearing Swaging Equipment G21007-1 Air Flow Cup - Low / High Blow Test G25010-98, -133, -167 Gantry Equipment - Passenger Seat G28018-28, -31, -32 Test Equipment—Engine Fuel Feed Manifold G38004-13 Blockage Removal Tool - Vacuum Lavatory System G38006-1 Blockage Removal Equipment - Vacuum Waste System G51002-1 Fall Protection - Overhead Personnel Support G51003-1 Fall Protection - Overhead Personnel Support G54020-1, -2 Sling Equipment - Strut Unload, Engine Removed (CE) G71009-167, -207 Fixture - Proof Load, Bootstrap Equipment G71038-1, -13 Unlock Pole Equipment - Fan Cowl Hold Open Rod G71045-1, -2 Hoisting Equipment - Engine Change Kits G71048-1 Thread Protector Equipment - Engine Mount and Thrust Link Bolts, GenX G71051-1 Calibration Kit—Load Cell System (CE) J10007-5, -59, -60 Weight Equipment—Dummy Engine (CE) J20002-44, -59 Load Positioner - Engine Accessories, 250 Lbs Capacity (CE) J20009-88, -108, -109, -110 Jacking Equipment - Hydraulic Telescoping (CE) J24015-1 Pressure Test Equipment - Engine Generators J26004-24, -28, -53, -54 Test Equipment - Squib, Fire Extinguishing System J27024-47, -48, -65, -66 Sling Equipment - Rudder, Remv’l & Installation (CE) J27052-1 Adapter - Side Gust Suppression Leak Test J27076-10 Test Assembly - Pressure Switch, Nose Gear J27079-31, -32, -38 Inspection Equipment - Elevator Freeplay J28007-9, -11 Pressurization Equipment - Wing dry bay, Fuel Leak Detection J28010-26, -96 Console - Shop Air Supply J28011-1, -11, -205 Aux. Defueling Equipment—External Power ControlUnit J32001-67, -68 Measuring Equipment - Brake Pedal J32008-74 Puller Equipment - Brake Systems Pins, MLG J32010-75 Puller Equipment - Wheel & Brake Sleeves, MLG Axles J32011-3, -7 Downlock Equipment—NLG & MLG J32012-18 Puller Equipment - Brake MLG J32031-12 Protector Equipment - Axle MLG J32032-22 Wrench Equipment - Wheel Retention Nut, MLG J32036-57 Remv’l & Inst’l Equipment - Aft Trunnion Pin, MLG J32052-1 Extension Bar - Functional Test, NLG Steering J32060-1 Drain Equipment - Oleo Strut, MLG & NLG




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— J32065-1, -13 Alignment Pin - MLG Tow Fitting J32067-85 Fixture—Functional Test, Landing gear Springs J32092-1 Bushing Replacement and honing kit—MLG J34002-19 Test Fixture - Angle of Attack J38004-232 Pump Equipment - Vaccum Lavatory System J46002-1, -2, -3, -4, -5 Fiber Optic Breakout Equipment - ARINC 600 Style Connectors J51004-1 Vacuum Generator Test Equipment J51005-1, -7 Installation / Removal Adapter, Fuselage Drain Valve J54005-32 Hoist Adapter - Diagonal Brace, Removal / Install (CE) J54009-25 Sling Equipment - Strut AFT Fairing (CE) J55001-13, -16 Bearing Equipment - Horizontal Stabilizer Removal / Installation J71001-63, -66 Sling Equipment—Inlet Cowl (CE) J71032-15 MAT - Protective, Engine Inlet, GE, PW & RR J71039-155 Guard - Inlet Engine Run UP Safety J71044 / J71046 Specification - Load Cell Equipment J78007-58, -85 Removal / Installation Equipment - Exhaust Sleeve & Plug (CE) K05001-1, -2 Extension Cable—Brake Release, MLG K07001-14, -18 Emergency Jacking Equipment - MLG (CE) K07002-13, -17 Emergency Jacking Equipment - NLG (CE) K07003-15 Jack Fitting - FWD Body K07004-1 Jack Fitting Equipment - Inner Wing K07005-1 Jack Fitting Equipment - Outer Wing K07006-1 Sling Equipment - Lifting Tethering Airplane Recovery (CE) K07007-1, -2, -35, -36 Hoist Equipment - Airplane Recovery Without MLG K09001-1 TowBar K10001-1, -26 Protective Cover - Wheel / Tire / Brake, MLG & NLG K10002-1 Plug - Inlet Vent, RR Trent 1000 K10003-1, -13 Tethering Equipment - Engine Pylon, Airplane Recovery K10004-1, -24 Plug Set - Exhaust Vent , Thermal Anti-Icing K10005-33, -34 Tethering Restraint - Entry Door K10006-1, -17 Tethering Equipment - Upper AFT Fuselage K10007-1 Protective Cover - Engine Inlet, GE GEnx K10008-14, -23 Protective Plug Equipment - Engine Exhaust, GE GEnx K10009-1, -15 Protective Plug Equipment - Thrust Reverser Exhaust Duct, GE GEnx K10010-21, -22 Tethering Equipment - Inboard and Outboard Flap Support K10011-1 Protective Cover - Engine Inlet, RR Trent 1000 K10012-14 Protective Plug Equipment—Engine Exhaust, RR Trent 1000 K10013-15 Protective Plug Equipment - Thrust Reverser Exhaust Duct, RR Trent 1000 K12001 Specification - Platform, Access MLG Wheel Well K20001-64 Hoist—FWD Electronic / Equipment (E/E) Bay Line Replaceable Units (LRU) (CE) K20002-25 Personnel Equipment - Shock Absorbing Lanyard, Engine / Strut K20003-35, -49 Personnel Equipment - Shock Absorbing Lanyard, Upper Wing (CE) K20004-30, -31 Personnel Equipment - Shock Absorbing Lanyard, Horiz. Stab (CE) K20005-1 Work Table - Pilot’s Aisle Stand




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K20008-46 Hoist - AFT Electrical / Electronic Bay Line Replaceable Units (CE) K20009-1 Pin Set - Rigging K20010-1 Hoist Equipment—P100 and P200 Power Panel Removal / Inst’l (CE) K20012-1, -2, -3 Protective Equipment - P100/P150/P200 Panels, AFT Electrical / Electronic Bay K20014-1 Wrench - Battery Enclosure, Electrical / Electronic Bay K21001-1 Install / Remove / Transport Cart - Supplemental Cooling Unit K21002-1 Transport Equipment - Cargo Refrigeration Unit Removal & Installation (CE) K21003-1, -67 Installation / Removal Equipment - Power Electronics Cooling System (PECS) (CE) K21004-40, -72 Adapter Equipment - Heat Exchanger Cluster, Removal & Installation (CE) K21006-46 Jack Adapter - Air Compressor, Air Conditioning Pack (CE) K21008-1 Jack Adapter - Air Cycle Machine, Air Conditioning Pack (CE) K21010-45 Jack Adapter - Ram Air Fan, Air Conditioning Pack (CE) K21011-59 Adapter Equipment - Adjustable Angle Jack (CE) K21012-1 Support, Fluid Service Cart Hose K21013-36 Remv’l / Inst’l Equipment - FWD Cargo Air Conditioning (FCAC) Pump (CE) K21014-1 Jack Adapter - Condenser, Air Conditioning Pack, Removal and Installation (CE) K21016-129, -130, -136 Adapter Kit - Liquid Cooling System Service K24001-1, -2, -3, -4, -114 Hoist Adapter - Variable Frequency Starter Generator (VFSG) (GE & RR) and -118, -119, -120 APU Starter Generator (ASG) (CE) K24002-1, -2, -3, -71 Dispatch Equipment—Motor Controllers K24003-2, -3, -4, -5 Breakout Equipment—Radiall EPX Connectors -6, -7, -8, -9, -10, -11 -12, -13, -14, -15, -16 -17, -18, -19, -20 -21, -22, -23, -24, -25 -26, -27, -28 K24004-1 Breakout Equipment - Power Conversion Panel (P500 / P600, in line) K24005-84 Variable Frequency Starter Generator Hoist - RR Engine All Purpose Stand (CE) K24006-51, -66 Breakout Box - Auto Transformer Rectifier Unit (ATRU) K24007-1, -2, -3, -82 Breakout Box Equipment - Motor Controllers K24008-1 Breakout Box - Remote Power Distribution Units (RPDU, In Line) K24011-2 Breakout Box - Start Power Unit (SPU, In line) K24012-1 Dispatch Kit - APU Starter Generator (ASG) K24013 (Various) Breakout Box - Circular Connectors, multipurpose K25001-1 Lever - Stowage Bin Release K25002-1 Adapter Equipment - Overhead Flight Attendant Rest (OFAR) / Overhead Flight Crew Rest (OFCR) Module, Removal / installation K25003-1 Hoisting Equipment - Upper Vestibule Module Removal / Installation K25005-1, -125 Dolly Equipment - Overhead Flight Attendant Rest (OFAR) / Overhead Flight Crew Rest (OFCR) Module Removal / Installation




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K25007-1, -49 Cart - Passenger Seat K26001-1, -20 Test Equipment - Fire Extinguishing Tubing, Cargo Compartment K26003-35, -36 Test Equipment - Engine Fire Extinguishing System K27001-1, -100 Removal / Installation Equipment - Leading Edge / Trailing Edge Power Drive Unit (PDU) (CE) K27002-83, -85 Adapter Equipment - Trailing edge Geared Rotary Actuator, Removal / Inst’l (CE) K27003-1 Adapter Equipment - Aileron Power Control Unit Removal / Installation (CE) K27004-156, -157, -158 Hoist Equipment - Removal & Installation, Rudder Power Control Unit (CE) K27005-63 Removal / Installation Equipment - Elevator Power Control Unit (CE) K27006-1 Removal / Installation Equipment - Spoiler Electric Motor Actuator (CE) K27007-1 Drive Adapter Equipment - Actuator, Horizontal Stabilizer Trim K27008-67 Sling Equipment - Removal / Installation, Aileron (CE) K27009-124 Removal / Installation Equipment - Flaperon (CE) K27010-99, -104 Remove / Install Equipment - High Lift Hydraulic Control Unit (CE) K27011-32, 33, 47 Dispatch Equipment - Hydraulic Spoiler Actuators K27012 Drive Adapter - Torque Tube Couplings, Leading Edge Slat and Trailing Edge Flap K27013-1 Electrical Covers - Leading Edge Slats, Trailing Edge Flaps, Flaperons K27014-38 Gap Gage - Spoiler to Flap Clearance K27015-24 Lock - Aileron Power Control Unit K27016-1 Lock - Horizontal Stabilizer Actuator Ball Nut K27017-22, -36, -46 Lock Equipment - Spoiler Hydraulic Actuators K27019-1, -56, -66, -70 Lock Equipment - Trailing Edge Flap K27021-1 Removal / Installation Equipment - Horiz. Stab. Trim Actuator K27022-1, -39 Rigging Equipment - Flaperon K27023-42, -64 Sling Equipment - Elevator Removal / Installation (CE) K27024-25, -30 Sling Equipment - Inboard Trailing Edge Flap, Removal & Installation (CE) K27025-25, -28 Sling Equipment - Outboard Trailing Edge Flap, Removal & Installation (CE) K27027-175, -207 Sling Equipment - Removal / Installation, Inboard and outboard Slats (CE) K27029-1 Extender Breakout Box Equipment - Flight Control Electronics Unit (FCEU) K27030-1, -2 Revolution Counter Equipment and Adapter Equipment K27032-1 Pin Puller Equipment - Drive Link, Outboard Trailing Edge Flap K27033-1 Wrench Set - Wing Trailing Edge Flap Support Nut K27035-1 Support Rod - Flaperon K27036-1 Wrench Equipment - Eccentric bushing Adjustment, Trailing Edge Flaps K27037-1, -47, -48 Rigging Equipment - Leading Edge Slat Installation K27038-1, -25 Lock—Rudder Power Control Unit K27039-1 Rigging Equipment - Trailing Edge Flaps




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K27040-1 Clamp Equipment - Drive Shafts, Leading Edge Slats and Trailing Edge Flaps K27041-69 Dolly - Horizontal Stabilizer Trim Actuator K27044-1 Support Equipment - Aileron K27046-15, -21 Lock - Elevator Power Control Unit (PCU) K27047-1 Removal / Installation Equipment - Spoilers and Flaperon Hinge Panels (CE) K27048-1 Dispatch Equipment - Horizontal Stabilizer Trim Actuator K27049-54, 78, -88 Hoist Equipment - Electronic Motor Controller, Horizontal Stabilizer (CE) K27050-1 Rigging Equipment - Trailing Edge Control Surface K27051-1, -10 Measuring Equipment - Electric Motor Actuator Position, Spoiler K27052-1 Removal / Installation Equipment / Torque Tube, Inboard Trailing Edge Flap K27054-1 Rigging Tool - Elevator K27055-1 Rigging Tool - Rudder K27056-1 Support Equipment—Elevator Power Control Unit (CE) K27057-1, -10 Wrench - Eccentric Bushing Adjustment, Leading Slat K27058-1 Rigging Tool - Slat Skew Detection Cable K27059-1, -12 Dispatch Equipment - Spoiler Electro Mechanical Actuator (SEMA) K27061-1 Lock-Out Equipment - Spoiler Electro Mechanical Actuator (CE) K28001-1 Spanner Wrench - Fuel Sump Drain Valve K28002-1 Drain Fitting - Fuel System K28003-1 Defueling Fitting - Main and Override Pump K28004-1 Test Equipment - Leak and Pressure, APU Fuel Line K28005-1 Test Equipment—Surge Tank Pressure Relief Valve K29001-1, -60 Adapter Equipment - Electric Motor Pump Removal / Installation (CE) K29002-78 Removal / Installation Equipment, Ram Air Turbine (CE) K29003-1 Adapter Assembly - Engine Driven Pump Bleed Adapter K29004-1 Adapter Reservoir Stand Pipe Operational Test K30001-1 Breakout Equipment - Wing, Translating Wire Bundle (WIPS/ SKEW, In-Line) K31001-1 Test Set - P40 Receptacle to Headset Jack K32001-1 Sling Equipment - Retract Actuator K32002-1 Protector Equipment - Axle and Thread, NLG K32003-1 Spring Removal / Installation Equipment - MLG Uplock & MLG Door Uplock K32004-17, -18 Removal / Installation Equipment - Fuse Pin, MLG FWD Trunnion Support K32006-1 Hoist Adapter Equipment - NLG Drag Brace Rem’l & Inst’l (CE) K32007-1 Spring Removal / Installation Equipment - Drag Brace, MLG K32008-71, -100 Wrench Kit - Landing Gear K32009-1, -25 Puller Equipment - Trunnion Pin, NLG ass’y and NLG Upper Drag Brace K32010-1 Dolly - Transportation, NLG K32011-1, -56 Replacement Equipment - Lower Bearing Seals, MLG K32012-1, -77 Hoist Equipment - Removal / Installation, NLG (CE) K32013-1 Removal / Installation Equipment - Retract Actuator, NLG (CE) K32014-1 Removal / Installation Equipment - MLG K32015-1 Replacement Equipment - Lower Seals, NLG K32016-1 Turnbuckle - Truck Position Actyuator, MLG




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K32017-1, -164 Build-Up Equipment—Truck Beam, MLG K32018-35 Side Strut Adjusting Equipment - Drag Strut Lock Link Assembly MLG K32019-64 Sling Equipment - Drag and Side Brace Removal / Installation (CE) K32020-1, -29 Retainer Equipment - MLG / NLG Torsion Link K32021-1 Dispatch Kit - Brake / Electric Brake Actuator (EBA) Connection Covers K32022-1 Wrench - NLG Wheel Retention Nut K32023-1 Shock Strut Equipment - Component Maintenance, NLG K32024-1 Shock Strut Equipment - Component Maintenance, MLG K32025-1 Removal / Installation Equipment - Retract Actuator, MLG Door (CE) K32026-1 Locating Equipment - Uplock Roller, MLG Door K32027-1 Pump, Retraction / Extension Landing Gear Actuator K32028-1, -2 Spanner Wrench - Gland Nut, MLG & NLG K32030-1 Sling Equipment - Handling, NLG K32031-1, -11 Puller Equipment - Bushing, MLG Bogie Beam K32032-1 Spanner Wrench - Steering Nut, NLG K32033-1 Build-Up Fixture Equipment - Shock Strut NLG K32035-1, -11 Removal & Installation Equipment - MLG Bogie Pivot Pin K32036-1, -2, -3 Dispatch Equipment—Axle Remote Data Concentrator K32037-1 Protector Equipment—Axle MLG K32038-1 Puller Equipment—Wheel & Brake Sleeves, MLG Axles (CE) K32039-1 Puller Equipment—Goodrich Brakes, MLG K32040-1, -73 Sling Equipment—Drag and Side Brace Removal / Installation MLG (CE) K35001-19, -100 Test Equipment - Flow Fuse, Crew Oxygen Distribution Manifold K38001-1 Removal / Installation Equipment - Vacuum Waste Tanks K42001-1 Breakout Box Equipment - Remote Data Concentrator (RDC) Connectors, Line Maintenance (IN-LINE) K42002-1 Breakout Box Equipment - Network Switch, Remote K42003-1 Breakout Equipment - Common Computing Resource (CCR) Cabinet K42004-1 Jumper Cable - Power Right Common Computing Resource Cabinet K45001-1 GSE Kit - Maintenance Laptop K45003-1 GSE Kit - Maintenance Laptop (Windows7) K46001-1 Breakout Equipment - Core Network Cabinet (IN-LINE) K46002-1 Fiber Optic Breakout Equipment K46003-1 Cable Assembly—Core Network Power K47001-1, -116 Nitrogen Generation System (NGS) Air Separation Module, Remv’l & Inst’l (CE) K47002-35 Leak Check Equipment K47003-1 Equipment - Nitrogen Generation System Motor Driven Compressor, Removal & Installation (CE) K49001-7 Thread Protector Equipment - APU Retention Bolts K49002-1 Hoist Equipment - APU Starter Generator (ASG) (CE) K49003-1 Dispatch Kit - APU K49004-1 Hoist Equipment—APU Removal / Installation (CE) K51001-56, -62 Static Balance Equipment - Flight Control Surfaces




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K51002-1 Platform - Service, Forward APU Firewall K51004-1 Bond Test Equipment—Standoffs, Pressure Deck Heat Shields K52001-1, -29 Rigging Simulator - Escape Slide, Passenger Door K52002-2, -66, -67, -68 Barrier - Passenger Entry Doors K52002-90 K52005-49, -85, -97 Hold Open Equipment - Passenger Entry Door K52006-1 Removal / Installation Equipment - Bulk Cargo Door (CE) K52007-1 Barrier - Safety Access Door K52008-175, -176, -233 Removal / Installation Equipment - MLG Door K52008-241 K52009-1 Barrier - Bulk Cargo Door K52010-1 Compression Set - Spring Passenger Entry Doors K52011-1 Installation Tool - Door Seal K52012-1 Test Equipment - Latch Assembly Blowout Doors K52014-1 Tool Kit - Cargo Door Rigging Adjustment K52015-23 Sling Equipment - Large Cargo Door Installation / Removal (CE) K52016-1 Safety Barrier - Cargo Doors K52017-1 Barrier - Section 48, Service Access Door K52018 Power Tool, Large Cargo Door Manual Opening K52024-69 Sling Equipment - Passenger Door, Removal/ Installation (CE) K52025-9 Wrench - Bearing Retainer End Cap, Lift Mechanism, Large Cargo Door K52026-1 Wrench - Hook Pull-IN Mechanism - FWD and AFT Cargo Door K52028-1 Wrench - Removal / Installation, Pull-IN Bearing Retainer Nut, Pull-IN Mechanism K52029-10 Dummy Girt Bar - Passenger Door Adjustment K52030-1 Adapter - Manual Drive, Large Cargo Door K52031-7 Rig Pin - Passenger Entry Door Lock K52032-1 Door Edge Protector - Removal / Installation K52033-1 Passenger Entry Door Vent Flap Seal Tool - Removal Installation K52034-1 Passenger Entry Door Hold-UP Rod, Removal / Installation K52035-1 Passenger Entry Door Hold-Up Rod K52036-1 Drilling Equipment - Hinge column Assembly, Passenger Entry Doors K52037-15 Installation Assembly - Window Edge Protector K52038-1 Cam Nut Socket - Removal / Installation, Handle Cam Nut K52039-1 Rig Pin, Passenger Entry Door Girt Bar K52040-1 Rig Pin - Large Cargo Door Valve Lever Arm K52041-1 Rigging Equipment - Large Cargo Door Vent Door Closed K52042-1 Spanner Wrench - Hinge Column Gas Spring K52044-1 Adapter - Drain Valve K52045-1 Spring Compression Equipment - Latch Probe Installation, Bulk Cargo Door K52046-1 Location Tool - Latched Proximity Sensor, FWD and Aft Cargo Door K52047-1 Roller Guide Adjustment Tool - Electric Equipment Access Doors K52048-1 Wrench Eccentric Inner Bushing, Bulk Cargo Door K52049-1 Fill and Bleed Equipment—Large Cargo Door




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K52050-1 Removal / Installation Socket - Door Handle Nut, Access Doors K52051-1 Proof Load Equipment - Removal / Installation Equipment, MLG K53001-1 Platform Equipment - Pressure Bulkhead Access K53002-31 Removal / Installation Equipment - Radome (CE) K53003-34 Ladder Equipment - Empennage Access, Vertical Fin K53004-1, -54 Access Ladder Equipment - Horizontal Stabilizer K53005-1 Wrench Assembly - Torque Adjustment, Radome Latch K53007-1 Platform Equipment - Passenger Floor Panel Support K54001-100, -111 Removal / Installation Equipment - AFT Strut Fairing (CE) K54003-1 Sling Equipment - Strut Fuse Pin Unload, RR Engine (CE) K54004-43 Sling Equipment - Removal / Installation Engine Pylon (CE) K54005-1, -38, -48 Removal / Installation Kit - Fuse Pin K54006-1 Locating Jig Equipment - Side Link Hole Centers K54007-1 Sling Equipment - Strut Unload, GE Engine (CE) K55001-1, -55 Jacking Equipment - Horizontal Stabilizer K55002-1, -2 Lock Assembly - Horizontal Stabilizer K55003-1 Removal / Installation Equipment - Hinge Pin, Horizontal Stabilizer K55005-1, -87 Sling Equipment - Removal / Installation, Vertical Fin K55006-73, -74 Reaction Fixture Equipment - Torque Tool K55006-75, -125 K55008-1 Tension Bolt Inspection Platform K56001-38 Sling Set - Number 1 & 2 Control Cabin Windows (CE) K56002-1 Protractor - Window Clip Check, Passenger Door K56003-1 Removal Shim - Passenger Door K71001-140 Engine Change Kit - GE (CE) K71002-116, -141 Engine Change Kit - Rolls Royce (CE) K71003-65,-73, -86, -87 Proof Load Fixture Adapter - Bootstrap Equipment K71004-34 Transportation Equipment - Engine Mount Stabilization, GE K71005-1 Transportation Equipment - Engine Mount Stabilization, Rolls Royce K71006-20 Hoist Equipment - Engine Mounts FWD and AFT, RR and GE (CE) K71007-1 Thread Protector Equipment - Engine Mount & Thrust Link Bolts, GE & RR Eng. K71008-37 Sling Equipment - Fan Cowl Support Beam, GE GEnx (CE) K71009-36, -41 Sling - Fan Cowl (CE) K71010-1, -2 Stand Assembly - Storage, Inlet Assembly K71011 Specification—Access Platform, GE and RR Engines K71012-1 Adapter—Hand Pump, Power Door Opening System K78001-49 Thrust Reverser Change Kit - GE GEnx K78002-70 Sling Equipment - Thrust reverser Sleeve, GEnX (CE) K78003-71, -95 Thrust Reverser Change Kit - RR Trent 1000 (CE) K78004-104 Sling Equipment - Removal / Installation, Fan Reverser Sleeve , RR Trent 1000 (CE) K78005-22 Hold Open Equipment - Hangar Maintenance, RR Thrust Reverser K78006-1 Lock - Thrust reverser Isolation Valve (Ground)




————————————————————————————————–————— Part Numbers Description ————————————————————————————————–————— K78008-1 Stand Transportation / Work GEnx Thrust Reverser K78009-1 Hold Open Equipment - Hangar Maintenance, GE Thrust Reverser K78010-72 Stand - Transportation / Work, RR Trent 1000 Thrust Reverser 2CF65B05528-1 Balance Stand - Outboard Aileron, Upper Rudder and Outboard Elevator 2ME65B00002 Wrench - Spanner Safety Lanyard Tie Down Locks TMH AE50 Wireless Weighing Load Cells TMH AS53 Tripod Jack Nose TMH TJ50 Tripod Jack Nose TMH TJ80 Tripod Jack Tail TMH TJ81 Tripod Jack Wings TMH TB77 Polyvalent Tow Bar



WARRANTY

DCM AEROSPACE (“DCM”) warrants that this product, manufactured in accordance with the best standards of workmanship, is free from any known defects, has been inspected and tested and was found to be in conformance with the specific standards, drawings and other pertaining documents. This commitment is in force for one (1) year from the date of shipment and applies only to the original user (Purchaser) of new Equipment from DCM. The product purchased under this agreement shall be used exclusive-ly by the Purchaser. There shall be no third party beneficiary of this warranty, except as authorized by DCM Aerospace. DCM has the right to site inspection and judgment of the claimed defects in any product cov-ered by this warranty. DCM’s liability is limited to the repair of any defects found by DCM to exist or, at DCM option, the replacement of the defective item. When the part or equipment must be returned to DCM for inspection or repair, the Purchaser must pay the transportation cost. Should the customer require the inspection or work to be done on his site by DCM qualified technicians, the Purchaser will have to assume the travel-ling expenses (traveling and logging expenses) of the technicians. Without limiting what fol-lows, DCM will assume the cost of labour to execute the repair to be done on site under war-ranty. The warranty does not cover :

Parts required for normal maintenance (normal wear and tear). Parts already covered by a component manufacturers warranty. Defects or deficiencies due to or arising out of weather or other influences of nature.

This warranty will apply only if all the following conditions are met:

1) the product was installed and operated in accordance with accepted industrial standards and in accord-ance with the printed instructions furnished by DCM or by original designer; and ,

2) the Equipment was used under normal conditions for which designed; and, 3) the product was not used in a corrosive, abnormally dusty or high humidity moisture condensing envi-

ronment; and , 4) the Equipment was not subjected to misuse, improper, abnormal, or negligent handling, operation,

maintenance, overloading, or use (e.g. exceeding the maximum workload, improper maintenance), im-proper site or installation; and,

5) the Equipment received proper care, protection and maintenance under the supervision of competent personnel; and,

6) no tampering, alteration, or repair were made by Purchaser, or by a third party other than DCM, without the prior written consent of DCM.

The warranty will not apply unless the buyer gives written notice to DCM of the specific defect within seven (7) business days of discovery of such defect and the buyer has met its financial obligation under the Contract, in-cluding its payment obligations. If a problem requiring servicing occurs, please contact DCM immediately. Do not attempt to repair or disassemble the product without first contacting DCM, since any action may affect war-ranty coverage.



WARRANTY

THIS LIMITED WARRANTY as defined herein, is the SOLE AND EXCLUSIVE WARRANTY OF DCM AND IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER OBLIGATIONS OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-RANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED. Purchaser’s sole and exclusive remedy for breach of warranty against DCM is limited to the repair or replacement, at DCM’s option, of defective parts. In the event DCM is una-ble or otherwise fails to repair or replace within a reasonable time, Purchaser’s sole and exclusive remedy against DCM is limited to an amount not in any event to exceed the Purchase Amounts actually paid for the Equipment (upon return of the Equipment to DCM).

DCM shall in no event be liable to the Purchaser, nor shall the Purchaser recover from DCM, for injury to per-sons or damage to property, or any other loss or damage whatsoever, arising out of or in connection with the con-tract, delivery, assembly, disassembly, repair, use, or installation of the Equipment (whether arising from any claim based upon contract, warranty, tort, products, liability, strict liability, or any other legal or equitable theo-ry), for any amount in excess of the purchase amounts actually paid by the Purchaser to DCM for the Equipment; provided, however, that in no event shall DCM be liable to Purchaser in any manner for any special, indirect, incidental, or consequential damages, including damages or losses arising out of the inoperability of the Equip-ment, operating labour, overhead, or lost profits (whether arising from contract, warranty, tort, products liability, strict liability, or any other legal or equitable theory), even if DCM has been advised of the possibility therefore. Any action for an alleged breach of contract relating to any Equipment sold by DCM to the Purchaser must be commenced by Purchaser within one (1) year of the date on which such cause of action accrued. The provisions of this agreement shall be construed and enforced in accordance with the uniform commercial code as enacted in the Province of Quebec - Canada. ***

DCM Aerospace 519 Papineau street Boisbriand, Quebec Canada, J7G 2B7 Phone : (450) 435-9499 Fax : (450) 435-3378 E-Mail : [email protected] Web site : www.dcmaerospace.com

DCM Aerospace - Tooling & GSE Catalogue 2016

Documents

Transcript of DCM Aerospace - Tooling & GSE Catalogue 2016