Datasheet Experience bright and vivid colors · 3 Datasheet - Fortimo LED SLM 1205 L13 Gen5...
Transcript of Datasheet Experience bright and vivid colors · 3 Datasheet - Fortimo LED SLM 1205 L13 Gen5...
December 2015
Datasheet
Fortimo SLM 1205 L13 G5Fortimo LED SLM Gen5 continues to focus on the combination of Quality of Light and performance. By offering the CoB separate from the holder, even more flexibility in possible system combinations and specifications is achieved. This results in an extensive portfolio of lumen ranges, CCTs and spectras. Please also check the online Easy Design-in Tool for your perfect system combination (www.easydesignintool.com)
Key features and benefits• High quality of white light• Small LES for narrow beam angles and small reflector designs• Flexibility to select a different lumen output between 700 and 6000 lm • High energy efficacy of up to 147 lm/W or even higher• System proposition (CoB + Holder + driver)• Xitanium window drivers with SimpleSet for maximum flexibility • Mini drivers for smallest possible luminaire designs • Five years system warranty• Over 50,000 hours lifetime• Three dedicated product lines:
- SLM Gen5 Premium White - SLM Gen5 CrispWhite - SLM Gen5 Food
Experience bright and vivid colors
SLM 1205 L13 Gen5
2 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
This product is available in the following options. It is possible to combine these with any of the holders from the portfolio. The customer has full flexibility to tune the CoB to get the required lumen output and/or efficacy. More details can be found further on in the document.
Ordering data
Commercial product name EOC 12NC
Fortimo SLM C 827 1205 L13 2024 G5 6947939 118090 00 9290 009 85680
Fortimo SLM C 830 1205 L13 2024 G5 6947939 118113 00 9290 009 85780
Fortimo SLM C 835 1205 L13 2024 G5 6947939 118137 00 9290 009 85880
Fortimo SLM C 840 1205 L13 2024 G5 6947939 118151 00 9290 009 85980
Fortimo SLM C 927 1205 L13 2024 G5 6947939 118175 00 9290 009 86080
Fortimo SLM C 930 1205 L13 2024 G5 6947939 118199 00 9290 009 86180
Fortimo SLM C 935 1205 L13 2024 G5 6947939 118212 00 9290 009 86280
Fortimo SLM C 940 1205 L13 2024 G5 6947939 118236 00 9290 009 86380
Drive currents and case temperatures
Parameter Nominal* Life** Max*** Unit
I (current through the LED module) 500 500 1050 mA
Tc (Case temperature at Tc point) 85 85 95 °C
* Nominal value at which typical performance is specified.** Value at which lifetime is specified.*** Maximum value for safe operation, do not operate above this value.
Electrical Characteristics
Parameter Min Typ Max Unit
Nominal Current 500 1050 mA
Forward Voltage 34.2 37.2 V
Power consumption 17.1 18.6 W
Specifications stated at Tc-nom and I-nom.
Absolute Maximum Ratings
Parameter Min Typ Max Unit
Current through the LED module (I-max) 1050 mA
Case temperature (Tc-max) 95 °C
Power at rated Tc-max and I-max 39 W
ESD Human Body Model (HBM) Class 3A JESD22-A114-E 8 kV 8 kV
ESD Machine Model (MM) Class B JESD22-A115-B 400 kV
Ambient temperature -20 40 °C
Storage temperature -40 80 °C
3 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Rel
ativ
e in
tens
ity
(a.u
)Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
827R
elat
ive
inte
nsit
y(a
.u)
Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
830
Optical characteristics - table per color (CCT)
Fortimo SLM 827 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 2700 K
Color Coordinates (CIEx, CIEy) (0.458, 0.410) -
CRI 80 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module.Tolerance of ± 0.005 on x, y coordinates.
Fortimo SLM 830 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 3000 K
Color Coordinates (CIEx, CIEy) (0.434, 0.403) -
CRI 80 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module. Tolerance of ± 0.005 on x, y coordinates.
Operation point 827 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1830 134
Tc-nom 85 °C 1750 130
Tc-max 95 °C 1700 127
I-nom = I - life 500 mA Tc 65 °C 2210 128
Tc-nom 85 °C 2110 123
Tc-max 95 °C 2060 121
I-max 1050 mA Tc 65 °C 3970 100
Tc-nom 85 °C 3780 96
Tc-max 95 °C 3680 94
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Operation Point 830 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1920 141
Tc-nom 85 °C 1840 137
Tc-max 95 °C 1790 134
I-nom = I - life 500 mA Tc 65 °C 2320 135
Tc-nom 85 °C 2220 130
Tc-max 95 °C 2160 127
I-max 1050 mA Tc 65 °C 4180 106
Tc-nom 85 °C 3980 101
Tc-max 95 °C 3870 99
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
81 79 92 94 76 79 90 82 59 12 82 72 73 82 98
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
84 83 94 93 80 84 94 81 60 12 87 80 76 86 97
4 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Rel
ativ
e in
tens
ity
(a.u
)
Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
840
Optical characteristics - table per color (CCT)
Fortimo SLM 835 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 3500 K
Color Coordinates (CIEx, CIEy) (0.407, 0.392) -
CRI 80 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module.Tolerance of ± 0.005 on x, y coordinates.
Fortimo SLM 840 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 4000 K
Color Coordinates (CIEx, CIEy) (0.382, 0.380) -
CRI 80 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module. Tolerance of ± 0.005 on x, y coordinates.
Operation Point 835 lm Lm/W
80% I-nom 400 mA Tc 65 °C 2000 147
Tc-nom 85 °C 1910 142
Tc-max 95 °C 1860 139
I-nom = I - life 500 mA Tc 65 °C 2420 140
Tc-nom 85 °C 2310 135
Tc-max 95 °C 2250 132
I-max 1050 mA Tc 65 °C 4340 110
Tc-nom 85 °C 4130 106
Tc-max 95 °C 4020 103
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Operation Point 840 lm Lm/W
80% I-nom 400 mA Tc 65 °C 2070 152
Tc-nom 85 °C 1980 147
Tc-max 95 °C 1930 144
I-nom = I - life 500 mA Tc 65 °C 2500 145
Tc-nom 85 °C 2390 140
Tc-max 95 °C 2330 137
I-max 1050 mA Tc 65 °C 4490 113
Tc-nom 85 °C 4270 109
Tc-max 95 °C 4160 107
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
85 86 96 93 80 85 94 83 65 22 90 79 71 89 97
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
82 80 89 96 79 80 85 86 63 5 74 77 58 82 98
5 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Rel
ativ
e in
tens
ity
(a.u
)Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
927R
elat
ive
inte
nsit
y(a
.u)
Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
930
Optical characteristics - table per color (CCT)
Fortimo SLM 927 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 2700 K
Color Coordinates (CIEx, CIEy) (0.458, 0.410) -
CRI 90 -
Energy Efficiency Label A+ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module.Tolerance of ± 0.005 on x, y coordinates.
Fortimo SLM 930 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 3000 K
Color Coordinates (CIEx, CIEy) (0.434, 0.403) -
CRI 90 -
Energy Efficiency Label A+ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module. Tolerance of ± 0.005 on x, y coordinates.
Operation Point 927 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1600 117
Tc-nom 85 °C 1530 113
Tc-max 95 °C 1490 111
I-nom = I - life 500 mA Tc 65 °C 1930 112
Tc-nom 85 °C 1840 108
Tc-max 95 °C 1800 106
I-max 1050 mA Tc 65 °C 3470 88
Tc-nom 85 °C 3300 84
Tc-max 95 °C 3210 82
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Operation Point 930 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1650 122
Tc-nom 85 °C 1580 118
Tc-max 95 °C 1540 115
I-nom = I - life 500 mA Tc 65 °C 2000 116
Tc-nom 85 °C 1910 112
Tc-max 95 °C 1860 109
I-max 1050 mA Tc 65 °C 3590 91
Tc-nom 85 °C 3420 87
Tc-max 95 °C 3330 85
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
92 92 96 99 91 91 96 91 79 54 90 91 81 93 99
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
93 93 97 99 91 92 96 91 81 58 92 92 77 94 99
6 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Rel
ativ
e in
tens
ity
(a.u
)
Wavelength (nm)
1
0.8
0.6
0.4
0.2
0380 430 480 530 580 630 680 730 780
940
Optical characteristics - table per color (CCT)
Fortimo SLM 935 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 3500 K
Color Coordinates (CIEx, CIEy) (0.407, 0.392) -
CRI 90 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module.Tolerance of ± 0.005 on x, y coordinates.
Fortimo SLM 940 1205 L13 G5Parameter Min Typ Max Unit
Correlated color temperature (CCT) range 4000 K
Color Coordinates (CIEx, CIEy) (0.382, 0.380) -
CRI 90 -
Energy Efficiency Label A++ -
Radiation Angle deg
Color consistency of 3 SDCM, averaged over the module. Tolerance of ± 0.005 on x, y coordinates.
Operation Point 935 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1710 126
Tc-nom 85 °C 1630 122
Tc-max 95 °C 1590 119
I-nom = I - life 500 mA Tc 65 °C 2070 120
Tc-nom 85 °C 1970 115
Tc-max 95 °C 1920 113
I-max 1050 mA Tc 65 °C 3710 94
Tc-nom 85 °C 3530 90
Tc-max 95 °C 3440 88
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Operation Point 940 lm Lm/W
80% I-nom 400 mA Tc 65 °C 1790 132
Tc-nom 85 °C 1710 127
Tc-max 95 °C 1670 125
I-nom = I - life 500 mA Tc 65 °C 2160 125
Tc-nom 85 °C 2060 121
Tc-max 95 °C 2010 118
I-max 1050 mA Tc 65 °C 3880 98
Tc-nom 85 °C 3700 94
Tc-max 95 °C 3600 92
Tolerance for flux data is ±10%.Tolerance for Vf data is ±10%. Tolerance for efficacy data is dependent on the above mentioned tolerances. Please refer to the warranty window to ensure that your operating conditions are covered.
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
93 93 97 98 90 91 94 94 87 68 90 90 69 94 98
Ri R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
94 95 99 98 91 93 96 92 85 69 96 92 76 97 99
7 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Beam shape
The Philips LED module generates a Lambertian beam shape, which is a pragmatic starting point for OEMs wishing to design secondary optics.
Lifetime
Operation point Lifetime x 1000 hours L70 L80 L90
B50 B20 B10 B50 B20 B10 B50 B20 B10
80% I-nom 400 mA Tc 65 °C >50 >50 >50 >50 >50 >50 >50 >50 42
Tc-nom 85 °C >50 >50 >50 >50 49 39 35 23 19
Tc-max 95 °C >50 >50 43 >50 34 27 24 16 13
I-nom = I - life 500 mA Tc 65 °C >50 >50 >50 >50 >50 >50 >50 47 37
Tc-nom 85 °C >50 >50 >50 >50 44 35 32 21 17
Tc-max 95 °C >50 49 39 46 30 24 22 14 12
I-max 1050 mA Tc 65 °C >50 >50 >50 >50 46 37 33 22 17
Tc-nom 85 °C >50 35 28 33 22 18 16 10 8
Tc-max 95 °C 38 25 20 24 16 13 11 7 6
Please refer to the warranty window to ensure that your operating conditions are covered.>50 k hours claim is based on extrapolating raw LM80-data by using statistical techniques.
CoB without a holder CoB with a standard/
down-light holder
CoB with a poke-in holder
180°
30°γ
30°
60°60°
90°90°
120°120°
100
200
300
400(cd/1000 lm) 0° L.O.R.= 1.00
180°
30°30°
60°60°
90°90°
120°120°
100
200
300
400(cd/1000 lm) 0° L.O.R.= 1.00
γ
180°
30°30°
60°60°
90°90°
120°120°
100
200
300
400(cd/1000 lm) 0° L.O.R.= 0.98
γ
8 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Mechanical characteristics
CL CL
CL
20±0.2
2x R1.6
ø 13+0.5-0.1
ø 15±0.324
±0.2
8
3.5
4.5
7.5
2
3.5
4.5
0.1
28
8.5
ø 2
0.5±0.2
1±0.1
+
-
Application information
Compliance and approvalIEC / EN 62031, IEC / EN 62471
EnvironmentalRoHS/REACH
Photobiological safety
Item Result: Risk group
Actinic UV Exempt
Near-UV Exempt
Retinal Blue Light Risk Group 1
Retinal thermal Exempt
Infrared Eye Exempt
Thermal skin Pass
EnvironmentalRoHS/REACH
IP rating No IP Rating
Overheating protection No Protection
9 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Tuning information
Current (mA)
Re
lati
ve
va
lue
(%
)
Flux vs Current
E�. vs Current
0
20
40
60
80
100
120
140
160
180
200
100 200 300 400 500 600 700 800 900 1000 1100
Tc (°C)
Rel
ativ
e va
lue
(%)
Flux vs Tc
E�cacy vs Tc
65
70
75
80
85
90
95
100
105
110
50 60 70 80 90 100
I [mA] Flux [%] Efficacy [%]
150 33,4% 118.5%
200 44,2% 116.2%
250 54,4% 113.8%
300 64,3% 110.8%
500 100,0% 100.0%
750 138,7% 88.5%
950 166,3% 81.5%
1050 179,1% 77.7%
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
Tc [°C] Flux [%] Efficacy [%]
95 97,5% 97.7%
85 100,0% 100.0%
75 102,4% 101.5%
65 104,7% 103.8%
55 107,0% 105.4%
Note: Performance above already considers 1-3% optical loss when holder is added to the COB.
0
200
400
600
800
1000
1200
0 10 20 30 40 50 60 70 80 90 100
TC Temperature (°C)
Cu
rre
nt
(mA
)
Warranty Window
Flux and efficacy versus temperature (at I = 500 mA)
Flux and efficacy versus current (at Tc = 85 °C)
10 Datasheet - Fortimo LED SLM 1205 L13 Gen5 December 2015
Lumen maintenance
0%
100%
70%
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000
B50
B10
Operating lifetime (hours)
Lum
en m
aint
enan
ce (
%)
0%
100%
70%
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000
Operating lifetime (hours)
Lum
en m
aint
enan
ce (
%)
65C
75C
85C
Lumen maintenance at I-life and Tc-life conditions
Lumen maintenance for B50 at current I-life conditions
>50 k hours claim is based on extrapolating raw LM80-data by using statistical techniques.
>50 k hours claim is based on extrapolating raw LM80-data by using statistical techniques.
© 2015 Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes inspecifications and/or to discontinue any product at any time without notice or obligation andwill not be liable for any consequences resulting from the use of this publication.
12/2015Data subject to change.
www.philips.com/technology