Data Enrichment Services - Blackbaud · 2017-08-15 · • Address Validation • Deceased...
Transcript of Data Enrichment Services - Blackbaud · 2017-08-15 · • Address Validation • Deceased...
www.blackbaud.co.uk Page 1
Data Enrichment Services
Executive Summary This document contains all information and instructions pertaining to Data Enrichment Services
including:
- Data Enrichment Services Overview
- High Level Process Flow
- Specific Instructions on Process Steps:
o How to export your Raiser’s Edge data
o How to create an FTP Site
o How to reset your FTP Site Password
o How to upload and download files from your FTP Site
o How to reupload your Data Enriched processed file to your Raiser’s Edge
You may also refer to the following KnowledgeBase articles:
• What is Mailwise & What Does it Do?
• Mailwise Data Preparation Guide; for instructions on how to query and export data for the
Mailwise Data Enrichment Service.
• Mailwise Attribute Guide; for instructions on how to create the necessary attributes utilised
by the service.
• Mailwise Return File Import Guide; for instructions on how to import the cleansed data.
• Mailwise Analysis Guide; for instructions on how to analyse the imported, cleansed data.
Data Enrichment Services Overview
With the help of our partner, CCR Data Ltd, we are able to make the process of managing your
data even easier and what’s more it only takes one click.
Our Data Enrichment Services allow you to keep your data as clean as possible, so your
fundraising efforts aren’t hampered by old addresses, bad phone numbers and missing donor
information. The last thing you want to do is waste time and money on efforts that lead to dead
ends because you have bad information.
Services we offer:
• Address Validation
• Deceased Suppression
• Gone away Suppression
www.blackbaud.co.uk Page 2
• Movers Address Update
• Postcode Address File
• Email Append
• Social Score
• Date of Birth Append
• Electoral Roll
• Deduplication
• Telephone Number Append
• Mosaic
• Wealth Profiling
• Mail Preference Service
• Telephone Preference Service
For more information about the above services, please see our website at
https://www.blackbaud.co.uk/datacleaning or contact your Blackbaud Account Manager @
[email protected] or call 0845 658 8590 to get started.
Process Flow Once your Blackbaud representative is aware of your interest in receiving Data Enrichment Services, the below is a high level process flow.
After reviewing your Audit Report with Blackbaud, if you decide to move forward with your Data Enrichment Service, you follow the next set of steps:
Please continue reading this document for specific instructions on each step. If you have any questions or problems along the way, please contact Blackbaud Support via Chat, by going to www.blackbaud.co.uk, then following the links to support > chat with support. Or, call on 0845 658 8500.
Export your
Raiser’s Edge
Data
Create and/or
login to your
FTP Site
Upload your
data export file
Wait for Blackbaud to
reach out to you with
your Audit Report
Blackbaud &
CCR will
process your
data
You will
receive an
automated
email that your
file is ready
Login to your
FTP site and
download the
final
processed file
Upload the file to your
Raiser’s Edge
www.blackbaud.co.uk Page 3
Step 1) Exporting and your Raiser’s Edge Data and Formatting
Supplying data to Blackbaud in the correct format will improve efficiency and accuracy. For full
instructions please refer to the Mailwise Data Preparation Guide.
Blackbaud can accept almost any file format including but not limited to: CSV, TEXT and SQL. - Where possible our preferred data format is a CSV file with field headers in the first row with the use of double quotes (“name”) as the text qualifier. Text files should consist of ASCII characters and use the western European code page.
Data security
Blackbaud data security very seriously and have published a full data security policy which can be
found at https://www.blackbaud.com/privacy-policy.aspx
For further information on the audit process or to discuss your requirements in more detail please
feel free to contact your Account Manager @ [email protected] or call 0845 658 8590.
Step 2) Create and/or login to your FTP Site
FTP Account Creation Process
1) Use either Internet Explorer Goggle Chrome or Firefox
2) Click here for the Blackbaud Data Enrichment Services FTP, this will take you to your FTP
Portal to create you FTP Account
3) Click on Signup
www.blackbaud.co.uk Page 4
4) Fill in your name and a user name. ******Very Important: The USER NAME should be in
the format “Mailwise_YourOrganisationNameSiteID” ******* Please remember not to
use spaces. If you do, there may be delays to processing your request. If your site id is not
known, proceed as normal.
Click Sign Up
www.blackbaud.co.uk Page 5
5) Create your own password or click “Generate” to have a password created for you. Be sure
to copy this password and keep it somewhere safe as you will NOT receive an email
containing this password. If you choose to create your own password, it must be 10
characters, contain both upper and lower case letters and at least 1 number.
All fields are
required to
create an FTP
account
here
www.blackbaud.co.uk Page 6
Click this to generate
a password,
customer to write
this password down
Click I’m
not a robot
www.blackbaud.co.uk Page 7
6) After checking box for “I’m not a robot.”, click the “Sign up” button and wait for the process
to complete.
Click relevant
signs, symbols,
Vehicles etc.
www.blackbaud.co.uk Page 8
7) You will then receive a message under the login fields that your site has been created
successfully. Additionally, you will receive an automated email confirming your account has
been created.
Please note that
the process can
take a minute or
so to complete
account
here
www.blackbaud.co.uk Page 9
8) You will be redirected to the login page and you can now use your username and password
to login to your FTP Site. If you forget your login or password, please follow the next set of
directions below. Please note you will be locked out after 5 incorrect login attempts.
How to Reset your Password
If you have already created your FTP site login and forgotten your username, if you followed the
correct formatting, it should be “Mailwise_YourOrganisationNameSiteID” Please do not enter any
spaces in the username.
If you have forgotten your password, please follow the below instructions and please note you will
be locked out after 5 incorrect login attempts:
1) Use either Internet Explorer Goggle Chrome or Firefox
2) Click here for the Blackbaud Data Enrichment Services FTP, this will take you to the login
page of the FTP Portal.
3) Click on Reset Password
Message to show
the account has
been successfully
created
www.blackbaud.co.uk Page 10
4) Enter your Username and Click on Reset Password
5) You will receive an automated message and email saying “Password reset successfully” and be redirected to the login screen.
www.blackbaud.co.uk Page 11
6) Go to your email to retrieve your new temporary password
www.blackbaud.co.uk Page 12
7) Log back into FTP Portal and click on Log In
8) This will then force you to change this password, minimum of 10 characters, containing both upper-case and lower-case characters and at least one number.
9) You are now logged back in, and can proceed with your file upload.
www.blackbaud.co.uk Page 13
How to Upload your Raiser’s Edge Database Export File to Your FTP (from
the first Process Step)
1) Use either Internet Explorer Goggle Chrome or Firefox
2) Log into your FTP Platform using your username and password. See above instructions for
FTP Site Creation or Password Reset instructions.
a. URL: Blackbaud Data Enrichment Services FTP Site
3) When you have logged onto your FTP Portal, Double Click on Customer Supplied Data
Folder.
www.blackbaud.co.uk Page 14
4) Click on the Upload Button at the top of the portal screen.
5) You will then have to browse for the file you would like to upload. You will have two
options how to upload your file.
1. Double Click on your file.
2. Click on file name and click on Open
6) You will now see a progress bar showing the status of the file you are uploading.
7) When your file has finished uploading you will see your file move from In Progress to
Completed.
www.blackbaud.co.uk Page 15
8) Your file has now been uploaded and you should receive an automated email
confirmation that your file has uploaded successfully. Blackbaud and the CCR team will
also receive this automated notification to kick off the Audit Report process.
9) Now simply wait for your Blackbaud representative to contact you with your Audit Report
results.
How to Download your final Raiser’s Edge file from the FTP Site once the
Data Enrichment Services have completed
After you have reviewed your Audit Report with Blackbaud and confirmed you would like to move
forward with the data enrichment service, you will eventually receive an email confirming your final
processed file is ready to be picked up from your FTP Site.
1) Use either Internet Explorer Goggle Chrome or Firefox
2) Log into your FTP Platform using your username and password. See above instructions for
FTP Site Creation or Password Reset instructions.
a. URL: Blackbaud Data Enrichment Services FTP Site
3) When you have logged onto your FTP Portal, Double Click on Processed Data Folder.
4) Click the checkbox next to the file you would like to download and click the “Download
button” near the top right of the portal screen.
www.blackbaud.co.uk Page 16
5) Check your download folder and download the file. Follow the next set of instructions to
learn how to upload this finalised data file to your Raiser’s Edge.
How to Upload the Final Processed File to your Raiser’s Edge Database
For full instructions, please refer to the following document:
• Mailwise Return File Import Guide