Danfoss Pumps
12
07-2009 DKCFN.PD.011.A9.02 521B0835 Data Sheet Pumps type PAH 2/4/6.3, P AH 10/12.5, PAH 20/25/32 and PAH 50/63/70/80/100 PAH 2/4/6.3, PAH 10/12.5, PAH 20/25/32 and PAH 50/63/70/80/100 are pumps designed to supply water ow under high pressure. The pumps are based on the axial piston principle enabling a very light and compact design. The pumps ar e designed so that lubricatio n of the moving parts in the pumps is provided by the water itself. No oil lubrication is thus required. PAH 20/25/32 cross-section Introduction All parts included in the pumps are designed to provide long service life, i.e. long service life with a constant ly high efficiency an d mininum of service required. The pumps ar e xed displacement pumps where the ow is proportional to the number of revolu- tions of the input shaft and the pump displace- ment. 1: Shaft sealing 2: Mounting flange/ housing with bearing 3: Retaining ring 4: Piston/shoe 5: Valve/thrust plate 6: Swash plate 7: Cylinder barrel 8: Spring 9: Port plate 10: Connecting flange
Transcript of Danfoss Pumps
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 1/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 2/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 3/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 4/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 5/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 6/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 7/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 8/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 9/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 10/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 11/12
8/12/2019 Danfoss Pumps
http://slidepdf.com/reader/full/danfoss-pumps 12/12
![Axial Piston Tandem Pumps - Danfoss€¦ · S42 Integrated Tandem Pumps (4T) are advanced hydrostatic units for medium power applications with maximum loads of 415 Bar [6020 psi]](https://static.fdocuments.in/doc/165x107/5eae70aff07f8c47a24f8052/axial-piston-tandem-pumps-danfoss-s42-integrated-tandem-pumps-4t-are-advanced.jpg)
