damixa_2010.pdf

105
2010 Catalogue Danish Design

Transcript of damixa_2010.pdf

Page 1: damixa_2010.pdf

2010Catalogue

Danish Design

Page 2: damixa_2010.pdf

At Damixa we have always been known for our designs. This is naturally something we are proud

of. But we do not design just for the sake of the design. When we develop new mixer taps, func-

tion and quality have equal priority with personality and appearance. We call it sensible design.

But you should, of course, just follow your own good taste and choose the Damixa mixer tap that

you think looks best. Whichever you prefer, you can be certain that it will be easy to use and that

it will work perfectly for many, many years.

Whendesignmakessense“

Page 3: damixa_2010.pdf
Page 4: damixa_2010.pdf

Not either/or, but both/andWhen you look at Damixa products, you need only to concentrate on their appearance and the design of your preference. Whichever product you choose, you can be certain that it will be top quality in terms of function, operation and quality.

At the same time, you can enjoy the wide range of industry-leading innovative functions and features that you get with Damixa. Here you can see a few examples.

Anti-scaldingSafety for little fingers “Anti-scalding” is an adjustable temperature

limiter which ensures that it is never possible

to run water that is so hot that it might injure

and scald someone. The limiter takes effect

at 38°C. The system also saves energy.

X-Change™Easy, fast and practical.Change the mixer tap in seconds without switching off the water. With the X-Change™ system you can change your mixer tap without using any special tools. You do not even need to switch off the water supply. It is easy, fast and practical.

Spray head pull outA flexible hose. With the “Pull out” system you can pull the

spray head up to 60 cm out from its fixed

position in the mixer tap. This makes it easier

to clean your sink, for example. After use,

the hose slides back into place using a simple

counterbalance system.

High FlowFrom 0 to 40 litres in 60 secondsA High Flow mixer tap fills your bath in no time.

The Hydro-flow cartridge system allows a flow

up to 40 litres of water per minute.

Swing diverterFrom bath to shower in no time.By moving the mixer tap spout, you can switch between bath and shower head. Fast and easy.

Eco-saveSave water with Eco-save...A water saving feature that is activated and adjusted on a small screw on the ceramic cartridge. You can save up to 25-30 % of your normal water usage, which benefits both you and the environment.

Dishwasher shut-off valveOff in a flash.An integrated valve that makes it possible

to have the water supply to the dishwasher

under the worktop. It also makes it possible

to switch off the water quickly.

Cool TechKeep cool.Cool Tech™ is a system which ensures that the mixer tap never gets too hot. The cold water runs on the outside in the mixer tap so that only the cold water influences the surface temperature.

Aqua SealEverything sealed off.On a selection of Damixa mixer taps with pull-out spray heads, the Aqua Seal ensures that water cannot run down under the worktop when the spray head is being used and when it is fitted in its holder.

Standard features

X-ChangeTM

Page 5: damixa_2010.pdf

Now you can switch mixer tap in less than 20 seconds

With X-Change™ you can change your Damixa mixer without using any special tools, and without turning of the water.

It takes just a few seconds, and you do not even need to switch off the water supply. Nor do you need to spend time looking for a pipe wrench and other special tools. The X-Change™ system is a perfect solution for many applications, for example in flats,

where you can choose between several dif-ferent models, but also in hotels because it is easy to replace a single dripping tap. The X-Change™ system is also beneficial where it is expedient to fit all the mixer taps at the end of a construction period.

X-ChangeTM

Page 6: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

Page 7: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

Page 8: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 9: damixa_2010.pdf
Page 10: damixa_2010.pdf
Page 11: damixa_2010.pdf
Page 12: damixa_2010.pdf
Page 13: damixa_2010.pdf
Page 14: damixa_2010.pdf
Page 15: damixa_2010.pdf

by DamixaO S I E RKitchen Simplicity

The OSIER Series consists of 3 different spouts, so you can choose the model that goes hand in hand with the other styles of the room. Whichever OSIER model you prefer, you will get an elegant one-grip fitting with both anti-scalding and water saving features.

OSIER also comes supplied with Damixa’s patented X-Change™ base as standard, which makes it possible to change the fit-tings in less than 20 seconds.

OSIER is manufactured in chrome, but a version in stainless steel is already on the drawing board.www.damica.com

Water saving

X-ChangeTM

X-ChangeTM Anti-scalding

Page 16: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 17: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 18: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 19: damixa_2010.pdf
Page 20: damixa_2010.pdf

A R CInfinite beauty. Infinite possibilities.

Arc is guaranteed to turn your world upside down. Not only will the beautiful design complement any room. The body, the arm and the head can all be adjusted individu-ally to offer an infinite amount of settings, allowing water to flow freely in virtually any direction. The multifunctional Arc is available with head and handle in chrome and black (standard) and in white and red – and is a unique solution for kitchens and bathrooms alike.

www.damixa.com

ArcRed

ArcBlack

ArcWhite

ArcCrome

Page 21: damixa_2010.pdf
Page 22: damixa_2010.pdf

.. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 23: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

Page 24: damixa_2010.pdf
Page 25: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 26: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 27: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 28: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 29: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

Page 30: damixa_2010.pdf
Page 31: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 32: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 33: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 34: damixa_2010.pdf
Page 35: damixa_2010.pdf
Page 36: damixa_2010.pdf
Page 37: damixa_2010.pdf
Page 38: damixa_2010.pdf
Page 39: damixa_2010.pdf

C L O V E RCreated to protect the environment by Damixa

Save water with Eco-save...A water saving feature that is activated and adjusted on a small screw on the ceramic cartridge. You can save up to 25-30 % of your normal water usage, which benefits both you and the environment.

www.damixa.com

Page 40: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 41: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 42: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 43: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 44: damixa_2010.pdf
Page 45: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

Page 46: damixa_2010.pdf
Page 47: damixa_2010.pdf
Page 48: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

Page 49: damixa_2010.pdf
Page 50: damixa_2010.pdf
Page 51: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 52: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 53: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 54: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 55: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. ..

.. .. .. .. ..

Page 56: damixa_2010.pdf

.. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 57: damixa_2010.pdf
Page 58: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 59: damixa_2010.pdf
Page 60: damixa_2010.pdf
Page 61: damixa_2010.pdf
Page 62: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 63: damixa_2010.pdf
Page 64: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 65: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. ..

.. .. .. .. ..

.. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 66: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 67: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 68: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 69: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 70: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 71: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 72: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 73: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 74: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 75: damixa_2010.pdf
Page 76: damixa_2010.pdf
Page 77: damixa_2010.pdf
Page 78: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

Page 79: damixa_2010.pdf

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

.. .. .. ..

.. .. .. .. ..

Page 80: damixa_2010.pdf
Page 81: damixa_2010.pdf
Page 82: damixa_2010.pdf
Page 83: damixa_2010.pdf
Page 84: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

Page 85: damixa_2010.pdf

.. .. ..

.. .. .. .. ..

.. .. ..

.. .. .. .. ..

Page 86: damixa_2010.pdf
Page 87: damixa_2010.pdf
Page 88: damixa_2010.pdf
Page 89: damixa_2010.pdf
Page 90: damixa_2010.pdf
Page 91: damixa_2010.pdf
Page 92: damixa_2010.pdf
Page 93: damixa_2010.pdf
Page 94: damixa_2010.pdf
Page 95: damixa_2010.pdf
Page 96: damixa_2010.pdf
Page 97: damixa_2010.pdf
Page 98: damixa_2010.pdf
Page 99: damixa_2010.pdf
Page 100: damixa_2010.pdf

Series Description Hole diameter

G Type V3.0 72000 Ø34

72820 Ø34

72830 Ø34

72013 Ø27/29/27/27

Profile 38047/38002 Ø34

38847/38802 Ø34

38877/38872 Ø34

Osier 18077/18072 Ø34

18087/18082 Ø34

18097/18092 Ø34

Eris 33147/33122 Ø34

Orbix 35047/35002 Ø35

Arc 29000 Ø34

29821/29021 Ø34

Merkur 14000 Ø34

14821/14021 Ø34

14721/14730 Ø34

14030/14040 Ø34

14831 Ø34

14013 Ø35/32/35

14012 Ø35/32/35

Venus 16047/16002 Ø34

16847/16857 Ø34

16877/16872 Ø34

16013 Ø27/28/27/33

Kafé 14138 Ø34

Clover 60047/60002 Ø34

60077/60072 Ø34

60847/60802/60837 Ø34

60877/60872 Ø34

Elara 52000 Ø34

52821/52021 Ø34

52831 Ø34

Lyra 51000 Ø34

51821/51021 Ø34

51831 Ø34

Saturn 25921/25930 Ø32

25821/25021 Ø32

Jupiter 15921/15930 Ø32

15821/15021 Ø32

15013 Ø35/32/35

Series Description Hole diameter

Space 10000 Ø34

10120 Ø34

10821/10021 Ø34

10030 Ø34

Titan 62000 Ø34

62821/62021 Ø34

62820 Ø34

Dispenser 48000 Ø30

48005 Ø30

48084 Ø30

Tradition 24000 Ø34

37005 Ø34

37008 Ø34

37010 Ø34

37029 Ø34

37020 Ø34

37035 Ø34

37013 Ø34

37078 Ø35/32/35

37014 Ø22

37016 Ø22

Hole diameter

Page 101: damixa_2010.pdf

Conditions for using Damixa products

Damixa products are designed to suit all types of installations and have been approved in many countries throughout the world. It is important that certain factors are taken into consideration when deciding which Damixa model is best for you

Pressure, capacity and noise conditions:

Check that the selected model meets your requirements. The high pressure mixer taps usually require a minimum of 120-150 kPa and a maximum of 600 kPa to work efficiently. To enable the 1- and 2- handle mixer taps to cover a very wide pressure area the aerator should be replaced with a flow straightener.

Space requirement:

Ensure that you have sufficient space for the selected model to be installed correct-ly. The dimensional sketches and installation instructions, which are included in the box of every mixer tap (and can be found under each product here on the website), will provide you with the tap dimensions.

Cleaning:

To clean your Damixa product, wipe it with a soft clean cloth after use. Soapy water or a liquid cleaning agent can be used, but no scouring agents must be used. Grime or deposits of calcium can be removed by using Vinegar or a weak solution of aci-dic acid, leave this to work for a short while and then rinse, using plenty of water.

PLEASE NOTE: The guarantee will be invalid if the incorrect cleaning material have been used.

Important factors!

Please ensure that your Damixa product does not come into contact with any strong acids, perticulary Hydrochloric Acid or any other agents that contain Chloric Chemi-cals. Colored finishes may fade if exposed to direct sunlight over a continual period of time.

Maintenance precaution against frost damage:

PLEASE NOTE: When installing a Damixa tap in a summer residence, where there may be a risk of frost damage, turn the mixer tapp off at the main supply and then drain any residual water.

Page 102: damixa_2010.pdf

Damixa Warranty

The following warranty provisions shall apply to pro-ducts delivered by Damixa ApS: Any products which are found to have manufacturing defects shall be replaced or repaired free of charge upon being returned carriage paid to Damixa within a maximum period of two (2) years from the date of invoice.

The warranty shall apply only where the defect is attributable to faulty materials or faulty manufacture and where such defect has not been caused by erroneous handling, incorrect fitting or inadequate maintenance, neglect or unusual wear and tear.

In the event of product defects which are covered by Damixa’s warranty, the following guidelines should be followed:

Defects found upon receipt, in connection with the installation or after installation shall be reported to the distributor from which the product was purchased with a view to agreeing on any remedying of the defect or return of the product. The distributor shall subsequently contact Damixa directly.

Page 103: damixa_2010.pdf

From 0 to 40 litres in 1 minute

Terms of Sale and Delivery

Introduction: The following terms of sale and delivery apply to all despatches from this company except where an alterna-tive agreement has been established in writing.

Placing of orders: The buyer is responsible for obtaining any necessary import licences, etc. required. Literature, catalogues etc.: Technical information and illustrations in catalogues, leaflets, etc. are subject to alteration and amendment without prior notice.

Packing:Unless otherwise agreed in writing, the prices quoted are inclusive of packing or other protection for ship-ment, which, under normal transportation conditions is required to prevent damage or deterioration of the articles until they arrive at the point of destination stated in the order.

Shipment: Unless otherwise agreed in writing, articles are sold ex works and the method of shipment is selected ac-cording to our best judgement and without responsibility for freight differences, which may occur. Unless it has been agreed in writing to the contrary, the date at which the risk is transferred is fixed according to the international rules of interpretation of commercial expressions (Incoterms) made out by the International Chamber of Commerce, valid at the time of acceptance of the order.

Date of despatch: Unless otherwise agreed in writing, confirmation of an order will be sent stating estimated date of despatch according to our best judgement. We take no responsibility for any consequential losses due to the late despatch.

Prices: Articles are normally supplied at the prices stated in quotations or order confirmations. Where a change of price occurs at our works before the date of despatch agreed upon, the prices will automatically be adjusted.

Returned goods: Goods shall only be returned via the wholesale plumbing supplier/distributor and subject to prior agreement where Damixa specifies the return number which must be enclosed with the return product along with a copy of the invoice. The good shall be marketable and must be returned in original packaging in undamaged condition. Provided that the goods are returned carriage paid, a 20 % return charge will be deducted.

Freedom from responsibility: The company cannot take responsibility for delays, cancellations or other problems resulting from working conflict and other similar circumstances of which the parties are not in control such as fire, war mobilisation or unforeseen military calling of corresponding extent, requisition, confiscation, currency restrictions, re-volts and disturbances, lack of means of transport, general shortage of articles, rejection of greater works, restrictions of motive power and defects of deliveries from subsuppliers or delay of such deliveries being due to some of the circumstances mentioned under this item.

Re-export: The goods cannot be re-exported without written agreement.

Arbitration:Any disputes concerning these terms of sale or resulting from additional agreements or concerning legal matters covered, will be settled under Danish Law but cannot be subjected to examination by court and will be settled by arbitration in conformity with Danish Law.

Page 104: damixa_2010.pdf

Damixa’s policy is one of continual refinement in the design and performance of our products. Therefore we reserve the right to change the specifications at any time. For this reason the Damixa product you purchase may differ slightly in appearance from that pictured.

www.damixa.com

Page 105: damixa_2010.pdf

Damixa ApS Østbirkvej 2 5240 Odense NØ Denmark Tlf: +45 63 10 22 10 Fax: +45 63 10 22 09 www.damixa.com