DALI DIMMING MICROWAVE MOTION SENSOR · DALI This sensor contains a DALI power supply circuit,...

Detection rangeHold-timeDaylight sensor

Power supplySensor antenna socket

Stand-by period Stand-by dimming level

8794

102

45

2614

4

Model: ANT01 (standard)Dual-processor daylight sensor Infrared remote receiver

Fixing finger

RJ11 cable entry

Model: ANT02 (optional)Dual-processor daylight sensor Infrared remote receiver

Fixing bolt

Screw nut

RJ11 cable entry

Suggested size for mounting aperture: 21 x 18mm

Suggested size for mounting aperture: 25mm dia

3.5 22.0

38

44

50

14

10

2.5

14.0

10.0

1.0 16.5

17.5

24

28

24

DA DA Push 1 Push 2

PushDALI

This sensor contains a DALI power supply circuit, which gives DALI output to the driver to carry out the sensor on/off and dimming control.

DETACHABLE ANTENNA OPTIONS

DALI DIMMING MICROWAVE MOTION SENSOR

MODEL: FXS05DL

DALI Dimming with Detachable Antenna and Remote Control

38

44

50

t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk

FXS05DL - KEY FEATURES

• DALI dimming control

• Easy programming via DIP switches or optional infrared remote control (REM01)

• Dual-photocell technology allows real daylight monitoring for use with 'step-dim' drivers in built-in applications

• RJ11 connection between the sensor body and antenna head, easy plug and play

• Designed for luminaires with limited space or with with metal louvres. Control unit can be mounted behind geartray while thedetached antenna head can be mounted remotely

• Zero-cross circuit protects the sensor relay against in-rush current, thereby maximising product life expectancy

• 5.8GHz C-band microwave motion sensor

• Operating voltage: 120 - 277V AC 50 - 60Hz

• Switched power : max. 30 devices; max. 60mA

• Stand-by power: 1s) : adjust the target lux level by turningthe light up or down. Both the adjustment on remote control and push switch can overwrite each other, the last adjustment remains in memory.

Sensor 'OFF' mode:

Short push (1s) : adjusts the dimming level

Sensor 'ON' mode:

* Short push (

2lux

10lux

6 7

1

SETTING VIA DIP SWITCHES

1

OFF

ON

ON

100%

2

50%

75%

sensoroff*

2

*to enter test mode (walk test) set hold-time to T3s*. This mode enables the user toset the desired detection range. In this mode, the daylight sensor is disabled, sowhen there is no motion detected the luminaire remains on. When motion isdetected, the luminaires cycles 3s on and 2s off.

3 4 5T3s30s90s5min

10min

30min

OFF

*

ON

ON

Disable

7

OFF

OFF

7

50lux

5

+

8 9 10

5min

10s

30min1h

10min

8

Stand-by dim level

This is the desired dimmed low light level after the hold-time in the absence of detected motion.

OFF

ON11

0%

12

10%

50%

30%

*

* when detection range is set to “sensor off” this sensor becomes a Push to DALI dimmer

I

II

III

IV

I

II

III

IV

I

II

III

IV

IIIIIIIV

VIV

IIIIIIIVVVI

Detection rangeDetection range can be reduced by selecting the combination on the DIP switches to fit user requirements.

Hold-time

This setting adjusts the period of full brightness after motion detection.

3 Daylight sensor

This setting adjusts the daylight threshold to enable or disable the sensor function.

“Disable”:

“50lux”:

The sensor works always, even during daylight.

The sensor works only in twilight.

“10lux, 2lux”: The sensor works only in the dark.

Stand-by period

This is the time period that the luminaire remains at a low light level before it is completely switched off in the long absence of detected motion.

= bi-level dimming control - luminaire always on

4

*0% = on/off control

10% Vdim = 1.5Vdc

30% Vdim = 3.0Vdc

50% Vdim = 5.0Vdc

8


Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.

Test3s Test mode

Ambientlearn

Ambient learn

Test mode default settings:• Daylight sensor = disabled• Hold time = 3s• Twilight time = N/A • Twilight level = N/A

To enter test mode (walk test) set hold-time to T3s*. This mode enables the user to apply the desired detection range. In this mode, the daylight sensor is disabled, so when there is no motion detected the luminaire remains on. When motion is detected, the luminaires cycles 3s on and 2s off (0.5s soft off/1.5s off).

*Users can quit this mode by pressing “ON/OFF”, “reset”, or any "hold time" bu�on.

SETTING VIA REMOTE CONTROL - REM01

Permanent ON/OFF function

Press “ON/OFF” button, luminaire goes to permanent on or permanent off mode, sensor is disabled.

*press “Auto”, “Reset” or “Ambient learn” to quit this mode.

Dim Dim +/-

Press “Dim” button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.

*After desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.

Auto Sensor mode

Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.

Reset Reset functionREM01

Note:

The buzzer short beeps (~0.5s) ONCE when sensor successfully receives RC signal after pressing any buttons except for“Ambient learn”.

The buzzer short beeps (~0.5s) TWICE to start learning ambient lux after pressing“Ambient learn” Then followed by a long beep (~1s) to indicate the success of ambient learning.

Press “Reset” button, all settings go back to the value of DIP switch settings.


DETECTION PATTERN

Ceiling mount (m) Wall mount (m)

Hei

ght

(m)

Hei

ght

(m)

WIRING DIAGRAM

FXS05DL

Antenna

DALI Driver

L N Push1Push2

DA DA L N + -LED

DALI Driver

DA

DA- DA+

DA L N + -LED


DAYLIGHT MONITORING

Brighter

Darker

Lux OFF Level

Ambient Light

Lux ON Level

Lux Time Lux Time

Lights turn on Lights turn off

Occupancy detected

lssue V1: 5/1/2020

t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.ukRegistered Office: Alex House 260/8 Chapel Street, Salford, Manchester, M3 5JZ

Company Registration No. 11821284 VAT Registration No. 320 9921 12

Utilising dual-photocell technology, the sensor can differentiate between natural light and artificial light from behind the diffuser. It can switch on automatically (even without movement) when the ambient light is below the target value, and then switch off automatically whenever the artificial light is not required (sufficient ambient light).

This is REAL & INTELLIGENT daylight monitoring for built-in applications.

Note: Lux-Off sampling time: ~30s; Lux-On sampling time: ~10s.

Lux-On function takes effect only when standby dimming period set at + ∞ .

DALI DIMMING MICROWAVE MOTION SENSOR · DALI This sensor contains a DALI power supply circuit,...

Documents

Transcript of DALI DIMMING MICROWAVE MOTION SENSOR · DALI This sensor contains a DALI power supply circuit,...