Cutting Metals Quiz Rip Saw Hacksaw Flush Cut Saw Piercing Saw 1.Name the tool shown below Dovetail...
-
Upload
percival-douglas -
Category
Documents
-
view
243 -
download
5
Transcript of Cutting Metals Quiz Rip Saw Hacksaw Flush Cut Saw Piercing Saw 1.Name the tool shown below Dovetail...
Rip Saw
Hacksaw
Flush Cut Saw
Piercing Saw
1. Name the tool shown below
Dovetail Saw
Jnr Hacksaw
Panel Saw
Tenon Saw
Picture BPicture A
3. Which picture shows the correct way of holding metal in the vice when using a Hacksaw?
Rip Saw
Hacksaw
Flush Cut Saw
Piercing Saw
4. Name the tool shown below
Dovetail Saw
Jnr Hacksaw
Panel Saw
Tenon Saw
6. What is wrong in this picture?
The bar is too big to be cut in this way
The bar being cut should be further back in the jaws
The bar being cut should be further forward in the jaws
Round bar should be cut in the shear hole
Because the Gabro guillotine
can cut thicker metal
Because the cutting action produces a waste notch
7. Why does the Gabro guillotine produce more waste material than the bench shears?
Bench Shears
Gabro Guillotine
8. Which tool is most suited to cut 25mm steel rod?
A Hacksaw
Tinsnips A Jnr Hacksaw
The Guillotine
25mm steel Rod
9. Which tool is most suited to cut 300 x 300 x 0.5mm steel sheet into strips ?
A Hacksaw
Tinsnips The Gabro guillotine
Jnr Hacksaw
0.5mm steel sheet