Cswip 3.1 April 2013, Surat

3
Page 1 of 3 Course Ref No.: WIS 5 Welding Inspectors Level 2 (Fresh & Retest) & Course Ref No.: WIS 7 AWS - CWI to CSWIP3.1 Bridge Course Title : CSWIP 3.1 “Certified Welding Inspector Seminar & Examination” Dear Sir, Sub: CSWIP 3.1 Seminars and Exam for the April, 2013 Registration. With the great pleasure, we are informing that next batch of CSWIP 3.1 Seminar and Examination is finalized during April, 2013 at Surat . The requirements of the same are given below for your information. For Further Queries, if any please contact either by email/phone The course is ideal for welding inspectors, welding engineers and supervisory staff: The candidate has to provide the following documents: All Qualification Certificates (i.e. 10 th , Inter, Diploma & Degree etc.) Experience Certificates Requirements of 3.1 Welding Inspector: Three years as a welding inspector OR certified visual welding inspector for a minimum of 2 years OR Welding instructor/welding foreman/ supervisor for a minimum of 5 years. TWI Enrollment Form Note: On the 3rd page of the Event Enrollment form we need the company seal and on 4th page in the place of verifying signature box, sign of authorized signatory required. Vision Certificate ( Eye Testing) Two Pass Port Size color photos [with Either White or Blue back ground] Copy of Passport Copy OR other Govt. Photo ID Latest CV Valid AWS-CWI Certificate (applicable only in case of - AWS-CWI to CSWIP 3.1 Bridge) Notice of CSWIP3.1 Examination Results (applicable - in case of Retest) Your Latest CV will be scrutinized as per requirements of cswip3.1 and you will be intimated your eligibility. Normally the seats or limited to 15 candidates for batch. At the earliest application are enrolled on first come first served basis. To avoid disappointment please forward the above certificates to the below given mail ID’s. The Management reserves right to change schedule / shift venue ‘Surat’ in case of no adequate strength of registration. Email ID: [email protected] and CC : to [email protected] Contact Person: S.B. Mody [Mo. 08128687560], R. V. Mehta [Mo. 08128687540] Address: Mody Institute For Non Destructive Testing (MINT), Time Square Building, T- 6 ~ T-12, 3 rd Floor, Near Bhulka Bhavan School, Anand Mahal Road, Adajan, Surat, Gujarat, Pin : 395 009, India. Encl. : TWI Enrolment form & Vision Certificate (to be filled up and sent to MINT at above mentioned address along with fees) along with Latest CV.

Transcript of Cswip 3.1 April 2013, Surat

Page 1: Cswip 3.1 April 2013, Surat

Page 1 of 3

Course Ref No.: WIS 5 Welding Inspectors Level 2 (Fresh & Retest) & Course Ref No.: WIS 7 AWS - CWI to CSWIP3.1 Bridge Course Title : CSWIP – 3.1 “Certified Welding Inspector Seminar & Examination”

Dear Sir,

Sub: CSWIP 3.1 Seminars and Exam for the April, 2013 – Registration.

With the great pleasure, we are informing that next batch of CSWIP 3.1 Seminar and Examination is finalized during April, 2013 at Surat. The requirements of the same are given below for your information. For Further Queries, if any please contact either by email/phone

The course is ideal for welding inspectors, welding engineers and supervisory staff:

The candidate has to provide the following documents:

All Qualification Certificates (i.e. 10th, Inter, Diploma & Degree etc.)

Experience Certificates

Requirements of 3.1 Welding Inspector:

Three years as a welding inspector OR certified visual welding inspector for a minimum of 2 years OR

Welding instructor/welding foreman/ supervisor for a minimum of 5 years.

TWI Enrollment Form

Note: On the 3rd page of the Event Enrollment form we need the company seal and on 4th page in the place of verifying signature box, sign of authorized signatory required.

Vision Certificate ( Eye Testing)

Two Pass Port Size color photos [with Either White or Blue back ground]

Copy of Passport Copy OR other Govt. Photo ID

Latest CV

Valid AWS-CWI Certificate (applicable only in case of - AWS-CWI to CSWIP 3.1 Bridge)

Notice of CSWIP3.1 Examination Results (applicable - in case of Retest)

Your Latest CV will be scrutinized as per requirements of cswip3.1 and you will be intimated your eligibility. Normally the seats or limited to 15 candidates for batch. At the earliest application are enrolled on first come first served basis. To avoid disappointment please forward the above certificates to the below given mail ID’s. The Management reserves right to change schedule / shift venue ‘Surat’ in case of no adequate strength of registration.

Email ID: [email protected] and CC : to [email protected]

Contact Person: S.B. Mody [Mo. 08128687560], R. V. Mehta [Mo. 08128687540]

Address:

Mody Institute For Non Destructive Testing (MINT), Time Square Building, T- 6 ~ T-12, 3rd Floor, Near Bhulka Bhavan School, Anand Mahal Road, Adajan, Surat, Gujarat, Pin : 395 009, India.

Encl. : TWI Enrolment form & Vision Certificate (to be filled up and sent to MINT at above mentioned address along with fees) along with Latest CV.

Page 2: Cswip 3.1 April 2013, Surat

Page 2 of 3

[A]

WIS 5 : CSWIP – 3.1 Welding Inspector Level 2 / WIS 7 : AWS - CWI to CSWIP 3.1 (Level 2) Bridging Seminar & Examination by TWI,UK

Seminar Schedule Daily Contact Hours Exam Schedule

April 15 ~ 18, 2013 8 Hours April 19 or 20, 2013

Seminar & Examination Fees of TWI, UK :

(1) For “ WIS 5 : CSWIP – 3.1 Welding Inspector (Level 2) ” Seminar & Examination is INR 93,500/-

(2) For “ WIS 7 : AWS - CWI to CSWIP3.1 (Level 2) Bridge ” Seminar & Examination is INR 46,750/-

(3) For Retest (eligibility as per Cl. 4 of CSWIP-WI-6-92, Latest Edn.) of WIS5 / WIS 7 : Retest Exam. Fees is INR 16,150/-

(4) For 2nd Retest ( Including One day Course), (eligibility as per Cl. 4 of CSWIP-WI-6-92, Latest Edn.) of WIS5 / WIS 7 : Retest Exam. Fees is INR 33,150/-

(5) Payment either of (1) or (2) or (3) or (4), as applicable to be made in the form of Demand Draft in favor of “Southern Inspection Services Private Limited” payable at Visakhapatnam and send to below mentioned Surat address .

(6) Payment to be sent to :

Mody Institute For Non Destructive Testing (MINT), Time Square Building, T- 6 ~ T-12, 3rd Floor, Near Bhulka Bhavan School, Anand Mahal Road, Adajan, Surat, Gujarat, Pin : 395 009 India.

Venue: Hotel Gate Way, Athwalines, Surat [ Tentative as of date]

During the course, 2 times tea and snacks with lunch will be provided to the delegates.

Fees to be paid at the earliest for confirmation of Enrolment

[B] Examination Subjects:

1. Theory Part A1 : General Welding Theory, Product Technology and NDT 30 Multiple Choice Questions. Time allowed 45 Minutes.

2. Theory Part B1 : Specific Welding Technology. 60 Multiple Choice Questions. Time allowed 90 Minutes.

3. Practical Part A2 : Inspection of a plate butt weld to a code provided by the Test Centre. Time allowed 1hr 15 Minutes [Not applicable for AWS-CWI to CSWIP 3.1 Bridge examination]

4. Practical Part B2 : Inspection of a Pipe Butt Weld to a code provided by the Test Centre. Time allowed 1hr 45 Minutes

5. Practical Part C2 : Inspection of a set of destructive test samples to a code provided by the Test Centre (Two Macros or Two Bends or Two Fractures). Time allowed 45 Minutes

Page 3: Cswip 3.1 April 2013, Surat

Page 3 of 3

[C]

Preparatory Course (NOT Mandatory) :

WIS 5 CSWIP – 3.1 Welding Inspector ( Level 2) WIS 7 CSWIP – 3.1 AWS to CSWIP 3.1 Bridging

Training Schedule Daily Contact Hours Total Training Hours

April 05 to 14, 2013 8 Hours Minimum & extendable to 10 Hrs.

100 Hours including Practical

Training Fees : 22,472/- (inclusive of Service Tax @12.36% ) Demand Draft in favor of “ Mody Institute For Non Destructive Testing ” payable at Surat.

Venue: Mody Institute For Non Destructive Testing (MINT), Time Square Building, T- 6 ~ T-12, 3rd Floor, Near Bhulka Bhavan School, Anand Mahal Road, Adajan, Surat, Gujarat, Pin : 395 009, India.

Fees to be paid at the earliest for confirmation of Enrolment

During preparatory course, No accommodation will be provided to delegates. If candidate wishes, institute will support to book Hotel as required.

Detail practical's on samples of Plates & Pipes, Macros sheets are arranged Minimum 40 multi choice examinations during the training program.