Creating Digital Video Creating Digital Video using a Digital Camcorder using a Digital Camcorder

& The Web & The Web

ETEC-562ETEC-562Spring 2004Spring 2004

Kai A. DupéKai A. Dupé

www.kaidupe.neptune.com

Steps To Creating Digital Video Steps To Creating Digital Video using MovieMakerusing MovieMaker

• Choose video contentChoose video content

• Connect video capture deviceConnect video capture device

• Capture contentCapture content

• Save movie fileSave movie file

• Send movie fileSend movie file

• View videoView video

• Share videoShare video

Connecting Digital Camera Connecting Digital Camera to PCto PC• Install USB drivers if neededInstall USB drivers if needed

– Disconnect DVC from PC & setup drivers.Disconnect DVC from PC & setup drivers.

• Locate USB cableLocate USB cable– Most camera’s come with a USB cableMost camera’s come with a USB cable– Similar to USB cable used for digital camerasSimilar to USB cable used for digital cameras

• Connect small end to DVC USB connectorConnect small end to DVC USB connector• Connect large end to USB port on PCConnect large end to USB port on PC• Verify XP recognizes new hardwareVerify XP recognizes new hardware

Using MovieMakerUsing MovieMaker

• Launch MovieMakerLaunch MovieMaker• Select “Capture Video”Select “Capture Video”

– Follow instructions using Capture Video Follow instructions using Capture Video wizardwizard

• Save Movie wizardSave Movie wizard– Follow instructions using Save Movie Follow instructions using Save Movie

wizardwizard– Drag “captured clips” from collections to Drag “captured clips” from collections to

storyboardstoryboard

www.neptune.comwww.neptune.com