crealco - Eurostyle · CLIP44 SHOPFRONT SYSTEM HINGED DOOR BUTTERFLY GASKET AND WEDGE CODES WEDGES...
Transcript of crealco - Eurostyle · CLIP44 SHOPFRONT SYSTEM HINGED DOOR BUTTERFLY GASKET AND WEDGE CODES WEDGES...
-
CLIP44 SHOPFRONT SYSTEMHINGED DOOR
PRODUCT MANUAL
Revision: November 2012
crealco. C L I P 4 4
Disclaimer: The right to make alterations is reserved 2012 Wispeco (Pty) Ltd, All Rights Reserved
-
IndexLegal Disclaimer 5Profile Identification 6-8Profile Identification Alternative Profiles With Woolpile 9Profile Identification 10-11Hinged Door Insert Hardware Identification 12Butterfly Gasket and Wedge Codes 13Leaf Size Limitation Guide 14Typical Configurations 15Cottage Pane Hinged Door Typical Configurations 16Fixing Details 17Single Hinged Door Inward Opening Cross Sectional Detail 18Single Hinged Door With Midrail Inward Opening Cross SectionalDetail
19
Single Hinged Door Inward Opening In Adaptor Frame CrossSectional Detail
20
Single Hinged Door With Midrail Inward Opening In Adaptor FrameCross Sectional Detail
21
Single Hinged Door Outward Opening Cross Sectional Detail 22Single Hinged Door With Midrail Outward Opening Cross SectionalDetail
23
Single Hinged Door Outward Opening In Adaptor Frame CrossSectional Detail
24
Single Hinged Door With Midrail Outward Opening In Adaptor FrameCross Sectional Detail
25
Single Cottage Pane Hinged Door Inward Opening Cross SectionalDetail
26
Single Cottage Pane Hinged Door Inward Opening In Adaptor FrameCross Sectional Detail
27
Single Cottage Pane Hinged Door Outward Opening Cross SectionalDetail
28
Single Cottage Pane Hinge Door Outward Opening In Adaptor FrameCross Sectional Detail
29
Double Hinged Door Inward Opening Cross Sectional Detail 30Double Hinged Door With Midrail Inward Opening Cross SectionalDetail
31
Double Hinged Door Inward Opening In Adaptor Frame CrossSectional Detail
32
Disclaimer: The right to make alterations is reserved
PAGE 2 2012 Wispeco (Pty) Ltd, All Rights Reserved
crealco. C L I P 4 4
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,BEE Certificates and the Performance Certificates for the relevant system. The manual must also beused in conjunction with the design and cutting list from the latest version of StarFront.
-
Double Hinged Door With Midrail Inward Openings In Adaptor FrameCross Sectional Detail
33
Double Hinged Door Outward Opening Cross Sectional Detail 34Double Hinged Door With Midrail Outward Opening Cross SectionalDetail
35
Double Hinged Door Outward Opening In Adaptor Frame CrossSectional Detail
36
Double Hinged Door With Midrail Outward Opening In Adaptor FrameCross Sectional Detail
37
Double Cottage Pane Hinged Door Inward Opening Cross SectionalDetail
38
Double Cottage Pane Hinged Door Inward Opening In Adaptor FrameCross Sectional Detail
39
Double Cottage Pane Hinged Door Outward Opening Cross SectionalDetail
40
Double Cottage Pane Hinged Door Outward Opening In AdaptorFrame Cross Sectional Detail
41
Assembly Detail 42Sill Machining Detail To Suit All Sill Combinations 43Sill Options 44Sill Combinations 45Sill Option 1 Floor Level Detail 46Sill Option 2 Floor Level Detail 47Sill Option 3 Floor Level Detail 48Sill Option 4 Floor Level Detail 49Midrail Machining Detail To Suit All Sill Combinations 50R4 Filler Adaptor Machining Detail 51Midrail Combinations 52Spigot Machining Detail 53Door Stile Machining Detail 54Rod & Spigot Assembly Detail 55Handle Machining Detail 56Lock Machining Detail 57Hinge Machining Detail On 26 Mullion To Suit 26B; 26C & 26E
58
Disclaimer: The right to make alterations is reserved
PAGE 3 2012 Wispeco (Pty) Ltd, All Rights Reserved
crealco. C L I P 4 4Index
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,BEE Certificates and the Performance Certificates for the relevant system. The manual must also beused in conjunction with the design and cutting list from the latest version of StarFront.
-
Hinge Machining Detail On Door Jamb 59Flush Bolt Machining Detail On R1Door Jamb Used In Meeting StileTo Suit; R3SP; R9; R9W; R11 & R11W
60
Single Hinged Door AAAMSA Test 61Double Hinged Door AAAMSA Test 62Setting Block Location 63
Disclaimer: The right to make alterations is reserved
PAGE 4 2012 Wispeco (Pty) Ltd, All Rights Reserved
Index
crealco. C L I P 4 4
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,BEE Certificates and the Performance Certificates for the relevant system. The manual must also beused in conjunction with the design and cutting list from the latest version of StarFront.
-
LEGAL DISCLAIMERAll information, recommendations or advice contained in this documentationis given in good faith to the best of Wispecos knowledge and is based oncurrent procedures in effect.
Since the actual use of this documentation by the user is beyond the control ofWispeco, such use is within the exclusive responsibility of the user. Wispecocannot be held responsible for any loss incurred through incorrect or faulty useof this documentation.
Great care has been taken to ensure that the information provided is correct.Wispeco will accept no responsibility for any errors and/or omissions, which mayhave inadvertently occurred.
All mechanical joints must be sealed with a Wispeco approved joint sealer.
Laminated glass must not stand in water.
All drawings in the Wispeco Documentation are shown NOT to scale.
Wispeco cannot accept responsibility for the use of standard products sinceWispeco does not know where these products are being installed.
The use of anti-magnetic stainless steel screws and pop rivets is recommendedto reduce galvanic corrosion in harsh environments.
The hardware recommended in this documentation is suitable for use in mostatmospheric environments. When hardware is used in severe costal environmentsthe manufacturer of the hardware must be consulted.
Fixing lugs on frames must be positioned as per the user manual and used inaccordance to the AAAMSA specifications. When profiles are screwed togetherthe screw centers must also be according to the user manual.
All glass used within Wispeco products must comply with SAGGA regulations.
All glazing above 10m from ground level must be signed off by a competent person(Glazing) in accordance with the national building regulations
By continuing to use this documentation you acknowledge that youunderstand and accept the legal disclaimer.
Disclaimer: The right to make alterations is reserved
PAGE 5 2012 Wispeco (Pty) Ltd, All Rights Reserved
crealco. C L I P 4 4
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION
75.00
CLIP44 26DRECESSED BACKW53365
75.00
CLIP44 26BRECESSED BACKW44084
75.00
CLIP44 26C JAMBOPEN BACKW26154
75.00
CLIP44 26EFLAT BACKW53194
95.00
CLIP44 95BRECESSED BACKW55365
105.00
CLIP44 105BRECESSED BACKW55364
CLIP44 130BRECESSED BACKW56084
130.00120.00
CLIP44 120BRECESSED BACKW55363
44.00
CLIP44 R6 SILLRAIL 150mmW44094
44.00
CLIP44 R4 HEAD/SILL RAIL 85mmW44088
44.00
CLIP44 R7 HEAD/SILL RAIL 50mmW44087
CLIP44 BOX SPIGOT4 X S/PORTW55456
62.30
CLIP44 150BRECESSED BACKW55362
150.00
Disclaimer: The right to make alterations is reserved
PAGE 6 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION
CLIP44 150mm MULLIONHEAVY DUTYW54043
30.00
CLIP44 W150 MULLIONW53151
30.00
CLIP44 MULLION W120W44092
30.00
CLIP44 MULLION W130W56083
30.00
CLIP44 MULLION W95W44090
30.00
CLIP44 MULLION W105W44091
30.00
CLIP44 MULLION 116.4mmW53305
30.00
W53033
30.00
CLIP44 MIDRAIL GLAZING BAR
30.00
CLIP44 26 MULLIONW44083
75.00
CLIP44 CORNER MULLIONW53029
Disclaimer: The right to make alterations is reserved
PAGE 7 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION
CLIP44 MULTI TRACKHEAD RAIL
57.60
CLIP44 MULTI TRACKSILL RAIL
57.60
CLIP44 MULTI TRACKSILL ADAPTOR
22.10
W26507 W26509 W26508
45.50
CLIP44 R12 SPECIALW44099
CLIP44 R12 DOUBLEDOOR JAMBW44086
44.00
CLIP44 R3 SPECIALDOOR JAMBW44093
44.00
CLIP44 R1DOOR JAMBW44085
44.00
CLIP44 R11WD/STILE 60mm W/PILEW53666
44.00
CLIP44 R11SPD/STILE 60mmW53566
44.00
CLIP44 R11DOOR JAMBW53099
44.00
CLIP44 R4-SPECIALMID RAIL 85mmW44089
44.00
CLIP44 R9WD/STILE 90mm W/PILEW53407
44.00
CLIP44 R9D/STILE 90mmW53406
44.00
CLIP44 R9SP D/STILE90mmW54720
44.00
Disclaimer: The right to make alterations is reserved
PAGE 8 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION- ALTERNATIVE PROFILES WITH WOOLPILE
W55875W55824
W32877
75.0
30.0
75.0
W56012
30.0
75.0
W55913
30.0
CLIP44 W150 MULLIONWOOLPILE
CLIP44 150mm MULLIONHEAVY DUTYWOOLPILE
W56013
30.0
CLIP44 W150 MULLIONWOOLPILE
W56014
30.0
CLIP44 W105 MULLIONWOOLPILE
W56015
60.0
CLIP44 W95 MULLIONWOOLPILE
CLIP44 FLATBACK WOOLPILE
CLIP 44 RECESSEDBACK WOOLPILECLIP44 JAMB
OPEN BACK WOOLPILE
CLIP44 MULLIONWOOLPILEW55891
Disclaimer: The right to make alterations is reserved
PAGE 9 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION
78.28
CLIP44 CORNERMULLION 1W28523
80.60
CLIP44 CORNERMULLION 2W28524
73.50
CLIP44 CURVED CLIPHAND RAILW27038
CLIP44 TRANSOM COVERW25029
97.00
101.60
CLIP44 TRANSOMW25028
CLIP44 UNIVERSALDOOR HANDLE
34.47
W26464
CLIP44 R19 SPECIAL CLADDINGW27934
116.00
COLONIAL BARW29247
40.0044.00
CLIP44 DOOR ENDSTYLE FOR PIVOTW26155
CLIP44 COMPENSATINGCHANNELW23224
44.40
CLIP44 THRESHOLDW30289
75.00
58.00
CLIP44 SLIDING DOORHEAD RAILW26198
CLIP44 ANGLEDGLAZING BEADW30468
21.10CLIP44 ANGLEDGLAZING BEAD
18.30
W14108
CLIP44 DOUBLEGLAZING BEAD
23.50
W27882
NEW CLIP44 ANGLEDGLAZING BEADW31142
18.1518.30
CLIP44 SQUAREGLAZING BEADW14109
Disclaimer: The right to make alterations is reserved
PAGE 10 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORPROFILE IDENTIFICATION
44.45
CLIP44 SILL ADAPTORW25048
47.55
CLIP44 DRAINAGE SILLW53448
CLIP44 DRAINAGESILL ADAPTOR
51.75
W27522
CLIP44 FLOOR TRACK
26.00
CLIP44 CHANNELSPIGOT
21.00 40.40
CLIP44 SPIGOTW26197
CLIP44 FRAME SPIGOT
71.00
W26228W26228
CLIP44 40mmCOVER PLATEW25025
40.05
44.00
CLIP44 PIVOT DOORHEAD ADAPTORW26207
CLIP44 DOOR ADAPTOR
46.30
W26150
CLIP44 DOOR ADAPTORFOR W150
83.43
W30505
CLIP44 DOORADAPTOR FOR W95
31.08
W29368
38.58
CLIP44 DOORADAPTOR FOR W105W29366
53.43
CLIP44 DOORADAPTOR FOR W120W29367
CLIP44 GLAZINGADAPTOR
46.30
W28643
40.00
CLIP44 R4 FILLERADAPTORW26151
CLIP44 SLIDING DOORSTOP ASTRAGAL
42.00
W25022
CLIP44 ASTRAGALWITH WOOLPILE
47.96
W27921
40.00
CLIP44 R4 SILLEND FILLERW26093
65.90
CLIP44 DOOR ADAPTORFOR W 130W33174
Disclaimer: The right to make alterations is reserved
PAGE 11 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORHINGED DOOR INSERTHARDWARE IDENTIFICATION
POP RIVET4.8x12mm
4x10 C/SUNKRIVET
8.00
BUTTERFLY H13 WEDGE H2
8.00
EQUAL ANGLE 50.0 x 50.0 x 2.0W20423
8x40 P/HEAD POSIS/S SCREW
SHOP HANDLE
CISA LATCH LOCK
ALUFAB HINGE
SPIGOT
FLUSH BOLT
FRAME SPIGOT
BOX SPIGOT 4 X S/PORTW53752
NVT8MMTR8MM
WSH8MM
FBNAT
HND26464NFG
HRA1040NATFG
CL44620/25
CLPIV4FG CLRIV65FG CSKR410 CSKR4812 STPPS840
W26197
W26228
Disclaimer: The right to make alterations is reserved
PAGE 12 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORBUTTERFLY GASKET ANDWEDGE CODES
WEDGES
BUTTERFLY GASKET
B01O
W01G W02B W03R
CLIP 44 WITH W31142 BEAD
27
4
26
5
25
6
24.62
6.38
W31142 BEAD
W05P
W30468 BEAD
CLIP 44 WITH W30468 BEAD
2
8.38
8.79 2
10.38
6.792
12
5.1 2
12.38
4.79
Disclaimer: The right to make alterations is reserved
PAGE 13 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORLEAF SIZE LIMITATION GUIDE
WHEN USING 45mm DOOR JAMB (EG. - R1 DOOR JAMB)
MAXIMUM DOOR LEAF WIDTH: X1 = 1000mmMAXIMUM DOOR LEAF HEIGHT: Y1 = 2200mm
60 1W
14
90 9W
26
W44085
WHEN USING mm DOOR JAMB (EG. W53666 - R1 DOOR JAMB)
MAXIMUM DOOR LEAF WIDTH: X1 = 1 00mmMAXIMUM DOOR LEAF HEIGHT: Y1 = 2 00mm
WHEN USING mm DOOR JAMB (EG. W53407 - R DOOR JAMB)
MAXIMUM DOOR LEAF WIDTH: X1 = 1 00mmMAXIMUM DOOR LEAF HEIGHT: Y1 = 2 00mm
X1
Y1
Disclaimer: The right to make alterations is reserved
PAGE 14 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORTYPICAL CONFIGURATIONS
SINGLE HINGED DOOR DOUBLE HINGED DOOR
SINGLE HINGED DOORWITH MIDRAIL
DOUBLE HINGED DOORWITH MIDRAIL
Disclaimer: The right to make alterations is reserved
PAGE 15 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOOR
TYPICALCOTTAGE PANE HINGED DOOR
CONFIGURATIONS
SINGLE COTTAGE PANEHINGED DOOR (2 x 3 PANE)
DOUBLE COTTAGE PANEHINGED DOOR (2 x 3 PANE)
SINGLE COTTAGE PANEHINGED DOOR (2 x 4 PANE)
DOUBLE COTTAGE PANEHINGED DOOR (2 x 4 PANE)
Disclaimer: The right to make alterations is reserved
PAGE 16 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORFIXING DETAILS
TYPICAL SINGLE DOOR
C/L LOCK
150 Max. 750 150
C/L HINGE
C/L HINGE
C/L HINGE
TYPICAL DOUBLE DOOR
150 Max. 750 Max. 750150150 150
C/L HINGE C/L HINGE
C/L HINGE C/L HINGE
C/L HINGEC/L HINGE
Disclaimer: The right to make alterations is reserved
PAGE 17 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOORINWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44090
W29368
W14108
W44088
W44090
W44085
W29368
W14108
Disclaimer: The right to make alterations is reserved
PAGE 18 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOR WITHMIDRAIL INWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44090
W29368
W14108
W44088
W44089
W44090
W44085
W29368
W14108
Disclaimer: The right to make alterations is reserved
PAGE 19 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOORINWARD OPENING IN ADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44084
W26150
W14108
W44088
W44084
W44085
W26150
W14108
Disclaimer: The right to make alterations is reserved
PAGE 20 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOR WITHMIDRAIL INWARD OPENING INADAPTOR FRAMECROSS SECTIONAL DETAIL
SECTION B - B
B
B
A A
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44084
W26150
W26150
W44089
W44088
W44085
W44084
W14108
W14108
Disclaimer: The right to make alterations is reserved
PAGE 21 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOROUTWARD OPENINGCROSS SECTIONAL DETAIL
SECTION B - B
B
B
A A
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44083
W14108
W44088
W44083 W44085
W14108
Disclaimer: The right to make alterations is reserved
PAGE 22 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOR WITH MIDRAILOUTWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44083 W44085
W14108
W14108
W44088
W44089
W44083
Disclaimer: The right to make alterations is reserved
PAGE 23 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOROUTWARD OPENING IN ADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
4.00 15.0030.0045.00
45.70
3.00
W44084
W44084
W26150
W14108
W14108
W26150
W44085
W44088
Disclaimer: The right to make alterations is reserved
PAGE 24 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE HINGED DOOR WITHMIDRAIL OUTWARD OPENING INADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
15.00
50.00
4.0030.0045.00
45.70
3.00
W14108
W44088
W44089
W44084
W26150
W44084
W14108
W26150
W44085
Disclaimer: The right to make alterations is reserved
PAGE 25 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE COTTAGE PANE HINGEDDOOR INWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION A - A
45.70
45.00 30.0015.004.00
50.00
20.0015.70
15.00
3.00
SECTION B - B
W44090
W44090
W44085
W14108
W14108
W53033
W53033
W29368
W29368
W44088
Disclaimer: The right to make alterations is reserved
PAGE 26 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE COTTAGE PANE HINGEDDOOR INWARD OPENING INADAPTOR FRAME CROSSSECTIONAL DETAIL
B
B
A A
SECTION B - B
15.00
SECTION A - A
45.70
45.00 30.004.00
50.00
20.0015.70
15.00
3.00
W44088
W44084
W44084
W26150
W26150W53033
W53033
W14108
W14108
W44085
Disclaimer: The right to make alterations is reserved
PAGE 27 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE COTTAGE PANE HINGEDDOOR OUTWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION A - A
SECTION B - B
45.70
45.00 30.0015.004.00
50.00
20.0015.70
15.00
3.00
W44085
W44083
W44083 W53033
W53033
W14108
W14108
W44088
Disclaimer: The right to make alterations is reserved
PAGE 28 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
B
B
A A
CLIP44 SHOPFRONT SYSTEMHINGED DOORSINGLE COTTAGE PANE HINGEDOOR OUTWARD OPENING INADAPTOR FRAME CROSSSECTIONAL DETAIL
SECTION A - A
45.70
45.00 30.0015.004.00
50.00
20.0015.70
15.00
SECTION B - B
3.00
W44084
W26150
W14108
W44088
W44084
W26150
W53033
W44085
W14108
W53033
Disclaimer: The right to make alterations is reserved
PAGE 29 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOORINWARD OPENINGCROSS SECTIONAL DETAIL
SECTION A - A
B
B
A A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.0015.003.00
50.00
SECTION B - B
W14108
W14108
W44088
W44090
W44090
W29368
W29368
W44085
W44085W44086
Disclaimer: The right to make alterations is reserved
PAGE 30 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOR WITHMIDRAIL INWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.0015.003.00
50.00
W14108
W44090
W29368
W44085
W44085W44086
W44090
W29368
W14108
W44088
W44089
Disclaimer: The right to make alterations is reserved
PAGE 31 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
B
B
A A
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOORINWARD OPENING IN ADAPTOR FRAMECROSS SECTIONAL DETAIL SECTION B - B
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.0015.003.00
50.00
W44084
W26150
W14108
W44088
W44084
W26150W44085
W14108
W44085W44086
Disclaimer: The right to make alterations is reserved
PAGE 32 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOR WITHMIDRAIL INWARD OPENING INADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.0015.003.00
50.00
W44084
W26150W44085
W14108
W44085W44086
W14108
W44088
W44089
W44084
W26150
Disclaimer: The right to make alterations is reserved
PAGE 33 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOROUTWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.0030.00
15.00
3.00
50.00
W14108
W44088
W44083
W44085
W44083
W14108
W44086 W44085
Disclaimer: The right to make alterations is reserved
PAGE 34 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOR WITHMIDRAIL OUTWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.00
15.003.00
50.00
W44085
W44083
W14108
W44086 W44085
W14108
W44088
W44083
W44089
Disclaimer: The right to make alterations is reserved
PAGE 35 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
B
B
A A
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOROUTWARD OPENING IN ADAPTOR FRAMECROSS SECTIONAL DETAIL
SECTION A - A
50.00
45.70
45.00
50.0045.70
45.002.00
2.00
4.00
45.7045.00
30.00
15.003.00
50.00
SECTION B - B
W14108
W44088
W44084
W26150
W44084
W44085
W44085
W44086
W14108
W26150
Disclaimer: The right to make alterations is reserved
PAGE 36 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE HINGED DOOR WITHMIDRAIL OUTWARD OPENING INADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.7045.00
30.00
15.003.00
50.00
SECTION B - B
W44084
W44085
W44085
W44086
W14108
W26150
W14108
W44088
W44089
W44084
W26150
Disclaimer: The right to make alterations is reserved
PAGE 37 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE COTTAGE PANEHINGED DOOR INWARD OPENINGCROSS SECTIONAL DETAIL
B
B
A A
SECTION A - A
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
45.70
45.00 30.0015.003.00
50.00
20.0015.70
15.00
SECTION B - B
W53033
W44085
W14108
W44085W44086
W44090
W29368
W44088
W14108
W44090
W29368
W53033
Disclaimer: The right to make alterations is reserved
PAGE 38 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE COTTAGE PANEHINGED DOOR INWARD OPENINGIN ADAPTOR FRAMECROSS SECTIONAL DETAIL
B
B
A A
SECTION B - B
SECTION A - A
45.70
45.00 30.0015.003.00
50.0020.0015.70
15.00
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
W44088
W14108
W53033
W53033
W44085
W14108
W44085W44086
W44084
W26150
W44084
W26150
Disclaimer: The right to make alterations is reserved
PAGE 39 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE COTTAGE PANEHINGED DOOR OUTWARDOPENING CROSS SECTIONAL DETAIL
B
B
A A
SECTION A - A
SECTION B - B
45.70
45.0030.00
15.003.00
50.0020.0015.70
15.00
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
W44088
W14108
W53033
W53033
W44085
W14108
W44085W44086
W44083
W44083
Disclaimer: The right to make alterations is reserved
PAGE 40 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
B
B
A A
SECTION A - A
45.70
45.0030.00
15.003.00
50.0020.0015.70
15.00
50.00
45.70
45.00
50.00
45.70
45.002.00
2.00
4.00
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOUBLE COTTAGE PANEHINGED DOOR OUTWARD OPENINGIN ADAPTOR FRAMECROSS SECTIONAL DETAIL
SECTION B - B
W44088
W14108
W53033
W44084
W26150
W53033
W44085
W14108
W44085W44086
W44084
W26150
Disclaimer: The right to make alterations is reserved
PAGE 41 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORHINGED DOORCOMPONENT ASSEMBLY DETAIL
1. W44085 - R1 DOOR JAMB2. W44088 - R4 HEAD/SILL RAIL3. W44089 - R4-SPECIAL MID RAIL 85mm4a. W26197 - SPIGOT 30mm4b. W26197 - SPIGOT 58mm
5. HRA1040NATFG - ALUFAB HINGE SINKLS 100x40mm NAT6. NVT8MM - NUT GALV 8mm ROD7. WSH8MM - WASHER GALV 8mm ROD8. TR8MM - 8mm THREADED ROD GALV 3M9. HND26464NFG - SHOP HANDLE UNIV NAT 190mm10. CL44620/25 - CISA LATCH LOCK 25mm B/SET11. FBNAT - FLUSH BOLT NAT ALUFAB 150x19mm
12. HANDLE MACHINING DETAIL SEE PAGE B4713. LOCK MACHINING DETAIL SEE PAGE B4814. HINGE MACHINING DETAIL SEE PAGE B5015. FLUSHBOLT MACHINING DETAIL SEE PAGE B51
1
1
1
2
2
2
2
3
3
4b
4b
4b
4b
4a
12
4a
4a
4b
4b
4b
4b
5
5
5
5
6
6
5
7
7
6
6
67
7
6
7
7
7
6
6
7
8
8
8
8
9
9
9
10
11
13
5
14
14
14
15
4a
9
11
15
10
Disclaimer: The right to make alterations is reserved
PAGE 42 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
VIEW A
VIEW B
3.30
4.70
CUTOUT TO LOCATEHORIZONTAL STILES ONR1 DOOR JAMB ORMEETING STILE PROFILE
VIEW B
VIEW AVIEW C
VIEW C
15.00
15.00
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL MACHINING DETAILTO SUIT ALL SILL COMBINATIONS
NOTE:FOR SILL COMBINATIONS PLEASEREFER TO PAGE B36 OF THIS MANUAL
W44088
W44088
W44088
Disclaimer: The right to make alterations is reserved
PAGE 43 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL OPTIONS
SILL OPTION 1W44088R4 HEAD/SILL RAIL 85mm ( )
SILL OPTION 2
26D RECESSED BACK ( )DOOR ADAPTOR ( )
R4 HEAD/SILL RAIL 85mm (W44088)W53365
W26150
SILL OPTION 3
DRAINAGE SILL ( )DRAINAGE SILL ADAPTOR ( )
R4 HEAD/SILL RAIL 85mm (W44088)W53448
W27522
SILL OPTION 4
THRESHOLD ( )R4 HEAD/SILL RAIL 85mm (W44088)
W30289
Disclaimer: The right to make alterations is reserved
PAGE 44 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL COMBINATIONS
R6(W44094)
R7(W44087)
R4(W44088)R7 + R7
(W44087+W44087)
R7 + R4(W44087+W44088)
R4 + R4(W44088+W44088)
R4 + R6(W44088+W44094)
R6 + R6(W44094+W44094)
Disclaimer: The right to make alterations is reserved
PAGE 45 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL OPTION 1FLOOR LEVEL DETAIL
FINISHED FLOORLEVEL (INSIDE)
FINISHED FLOORLEVEL (OUTSIDE)
DAMP PROOF COURSE
SCREED
7mm
W44088
W44088
Disclaimer: The right to make alterations is reserved
PAGE 46 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL OPTION 2FLOOR LEVEL DETAIL
FINISHED FLOORLEVEL (INSIDE)
FINISHED FLOORLEVEL (OUTSIDE)
7mm
DAMP PROOF COURSE
SCREED NON SHRINKINGGROUTCONCRETE/BRICKWORK
W44088
W44088
W53365
W26150
Disclaimer: The right to make alterations is reserved
PAGE 47 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL OPTION 3FLOOR LEVEL DETAIL
FINISHED FLOORLEVEL (OUTSIDE)
FINISHED FLOORLEVEL (INSIDE)
DAMP PROOF COURSE
SCREED
PATH OFDRAINAGE
W44088
W44088
W27522
W53448
Disclaimer: The right to make alterations is reserved
PAGE 48 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORSILL OPTION 4FLOOR LEVEL DETAIL
FINISHED FLOORLEVEL (OUTSIDE)
FINISHED FLOORLEVEL (INSIDE)
DAMP PROOF COURSE
SCREED
W30289
NON SHRINKINGGROUT
W44088
W44088
Disclaimer: The right to make alterations is reserved
PAGE 49 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
VIEW B
VIEW A
VIEW C
VIEW C
15.00
15.00VIEW B
3.00
5.00
CUTOUT TO LOCATEVERTICAL STILES ONUPSTAND LEGOF CILL
NOTE: PLEASE SEE PAGE B42FOR ALL MIDRAILCOMBINATIONS
VIEW A
15.00
15.00
CLIP44 SHOPFRONT SYSTEMHINGED DOORMIDRAIL MACHINING DETAIL TOSUIT ALL COMBINATIONS
W44089
W44089
W44089
W44089
Disclaimer: The right to make alterations is reserved
PAGE 50 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORR4 FILLER ADAPTORMACHINING DETAIL
VIEW B
VIEW A
VIEW C
VIEW B
3.00
5.00
CUTOUT TO LOCATEVERTICAL STILES ONUPSTAND LEGOF CILL
NOTE: PLEASE SEE PAGE B44FOR ALL MIDRAILCOMBINATIONS
VIEW A
VIEW C
15.00
15.00
W26151
W26151
W26151
W26151
Disclaimer: The right to make alterations is reserved
PAGE 51 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORMIDRAIL COMBINATIONS
W44(W53033)
R7 + R4 FILLER(W44087+W26151)
R4 + R4 FILLER(W44088+W26151)
R4SP(W44089)
R7 + R7 + R4 FILLER(W44087+W44087+
W26151)R7 + R4SP(W44087+W44089)
R6 + R6 + R4 FILLER(W44094+W44094+
W26151)
R6 + R4SP(W44094+W44089)
R6 + R4 FILLER(W44094+W26151) R4 + R4SP
(W44088+W44089)
Disclaimer: The right to make alterations is reserved
PAGE 52 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
8.0
6.0
W26197
CLIP44 SHOPFRONT SYSTEMHINGED DOORSPIGOT MACHINING DETAILW26197
Disclaimer: The right to make alterations is reserved
PAGE 53 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOOR STILE MACHINING DETAIL
VIEW A
VIEW B
VIEW B
VIEW A
8mm
6mm
8mm
6mm
THREADED ROD
W53099 W53099
W53099
W26197
CSKR4810
Disclaimer: The right to make alterations is reserved
PAGE 54 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORROD & SPIGOT ASSEMBLY DETAIL
DETAIL TYPICAL TO HEAD AND SILL OF HINGED DOOR
1. ATTACH SPIGOTS TO STILES WITH NO 8 FIXING SCREWS (STPPS830)2. FASTEN STILES TO TOP AND BOTTOM RAILS WITH NUTS (NVT8MM)
AND THREADED RODS (TR8MM). USE WASHERS (WSH8MM).3. ENSURE ALL MATING JOINTS ARE BEDDED IN SEALANT BEFORE ASSEMBLY.
W53099 W44088 W53099
W53099 W44088 W53099
Disclaimer: The right to make alterations is reserved
PAGE 55 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORHANDLE MACHINING DETAILHND26464NFG
VIEW A
VIEW B
6mm
VIEW B
VIEW A
W53099
W53099
HND26464NFG
W53099
Disclaimer: The right to make alterations is reserved
PAGE 56 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORDOOR LOCK MACHINING DETAILCL44620/25
VIEW A
VIEW C
17.00
10.00
NOTE:ALL MECHANICAL JOINTS TO BESEALED WITH SILICONE
3.8mm
VIEW B
22.50
VIEW C VIEW B
VIEW A
40mm x 50mm PLATE
W53099
W53099
W53099
W53099
CL44620/25
Disclaimer: The right to make alterations is reserved
PAGE 57 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORHINGE MACHINING DETAILON 26 MULLION TO SUIT 26B; 26C & 26EHRA1040NATFG
VIEW A
VIEW B
VIEW A
VIEW B
4mm
HRA1040NATFG
W44083
W44083
W44083
Disclaimer: The right to make alterations is reserved
PAGE 58 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORHINGE MACHINING DETAILON DOOR JAMBHRA1040NATFG
VIEW B
4mm
VIEW A
VIEW A
VIEW B
HRA1040NATFG
W53099
W53099
W53099
Disclaimer: The right to make alterations is reserved
PAGE 59 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORFLUSH BOLT MACHINING DETAILON R1DOOR JAMB USED IN MEETING STILETO SUIT: R3SP; R9; R9W; R11 & R11WHRA1040NATFG
VIEW B
4.6mmVIEW A
VIEW A
VIEW B
4.6mm
W44085
W44085
W44085
FBNAT
Disclaimer: The right to make alterations is reserved
PAGE 60 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CLIP44 SHOPFRONT SYSTEMHINGED DOORAAAMSA TEST
OUTSIDEINSIDE
W54986
W44088
1
W26150
AA
B
INSIDE
W44084W53407W53407
W55365W55365W44084
OUTSIDE
2 12
1 1
2 2
TO PASS A3 WATER AND WIND TEST THE FOLLOWING MODIFICATIONS MUSTBE IMPLEMENTED.
B
Section A-A
Section B-B
NOTES:
1. Silicone injected behind thehard backing bubble seal.
2. Silicone used in and aroundthe outer frame weather sealjoints to seal corners ofbubble seal,
Disclaimer: The right to make alterations is reserved
PAGE 61 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
TO PASS A3 WATER AND WIND TEST THE FOLLOWING MODIFICATIONS MUSTBE IMPLEMENTED.
OUTSIDEINSIDE
1
CLIP44 SHOPFRONT SYSTEMHINGED DOORAAAMSA TEST
W55365
W55824
OUTSIDE
INSIDE
W54720
W31142
Bubbleseal
AA
B
B1
1
Section B-B
Section A-A
NOTES:
1. Sondor tape to be added on the inside of the sill and head sections where doors close.
2. Silicone to be added to the bubble seal backing
Disclaimer: The right to make alterations is reserved
PAGE 62 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
GLAZING
1. SELECTION OF GLAZING METHODS
1.1 SETTING AND LOCATION BLOCKS
Glass-to-metal contact must be avoided at all times by using setting and location blockshaving a hardness of 50 to 90 shore A durometer. Use only blocks made of Neoprene,EPDM, Silicone or other elastomeric material.
Setting blocks are to have a minimum thickness of 3mm and must be at least 27mm inlength per square metre of glass area.
In the event of laminated glass and/or sealed insulated glass units drainage is to beprovided to prevent the glass edge to be submerged. Two or more 7mm diameter holes or5mm x 9mm slotted holes, or larger, are to be equally spaced in the sill section of sash orframe to allow for such ventilation/drainage.
The position of the setting and location blocks is illustrated in Figure 2.
SB over pivot
b) Vertically pivoted(hung off-centre)
a) Fixed Light
SB over pivot
c) Vertically pivoted(hung centrally)
d) Top Hung e) Bottom Hung f) Side Hung or door
g) Horizontally pivotedand reversible
h) Horizontally sliding;6 blocks to each pane
i) Vertically sliding
FIGURE 2 - POSITION OF SETTING AND LOCATION BLOCKS
CLIP44 SHOPFRONT SYSTEMHINGED DOORSETTING BLOCK LOCATION
Disclaimer: The right to make alterations is reserved
PAGE 63 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.