CRD-2196A IB EMER 001 REV0 GB · There’s an integrated iPod® docking station right up front that...

OWNER’S MANUAL

iC2196

Visit our web site at www.emersonradio.com

Made for all iPod® models including iPod® nano and iPod® mini

CD Stereo Dual Alarm Clock Radio

with Docking for iPod

CRD-2196A IB EMER 001 REV0 GB.p65 2008-1-11, 15:481

CAUTION

Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has twoblades with one wider than the other. A grounding type plug has two blades and a third groundingprong. The wide blade or the third prong is provided for your safety. If the provided plug does notfit into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where they exit from the apparatus.Only use attachments / accessories specified by the manufacturer.Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus hasbeen damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.This appliance shall not be exposed to dripping or splashing water and no object filled with liquidssuch as vases shall be placed on the apparatus.Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, use cautionwhen moving the cart/apparatus combination to avoid injury from tip-over.Do not overload wall outlet. Use only power source as indicated.Use replacement parts as specified by the manufacturer.The product may be mounted to a wall only if recommended by the manufacturer.Upon completion of any service or repairs to this product, ask the service technician to performsafety checks.

1.)2.)3.)4.)5.)

6.)

7.)

8.)9.)

10.)

11.)

12.)

13.)14.)15.)16.)

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTEN-SION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BEFULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCKHAZARD, DO NOT EXPOSE TH IS APPL IANCE TO R A I N O R M O I S T U R E .

The Caution Marking maybe located at the bottom enclosure of the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1 2

The lightning flash with arrowheadsymbol, within an equilateraltriangle is intended to alert the userto the presence of uninsulated‘dangerous voltage’ within theproduct’s enclosure that may be ofsufficient magnitude to constitutea risk of electric shock to persons.

The exclamation point within anequilateral triangle is intendedto alert the user to the presenceo f i m p o r t a n t o p e r a t i n g a n dm a i n t e n a n c e ( s e r v i c i n g )ins t ruc t ions in the l i te ra tureaccompanying the appl iance.

WARNING: TO REDUCE THE RISKOF ELECTRIC SHOCK DO NOTREMOVE COVER (OR BACK), NOUSER SERVICEABLE PARTSINSIDE REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.

fyi… … … .For Your iPod®

Thank you for purchasing this Home Audio System with integrated iPod® DockingStation by Emerson Research. This compact, but powerful system features a amplifierto deliver sound performance that you would never expect from a systemthis size.

There’s an integrated iPod® docking station right up front that will accommodate anyiPod® introduced as of January 2006. You can play any iPod® through the speakers ofthis system, and charge the battery in your iPod®.

There’s a top mounted CD player that also handles CD-Rs, and CD-RWs. The built inclock/timer allows you to wake to the radio, the CD player, and electronic buzzer,or even your iPod®. And we’ve included a convenient Auxiliary input jack (LINE INjack) that allows you to connect and play other types of MP3 players through thespeakers of this system as well.

With so many great features in such a compact system it is important that you readthis Owner’s Manual completely to insure that you are getting the maximum benefitfrom this unit. Please keep the manual handy for future reference until you arecompletely familiar with all the functions and operations of this system.

We have taken great care to make sure that every feature of your system was workingproperly when it left our factory. If you have any problems with the set-up or operationof this system, please do not return it to the retail store.

Please call the Emerson Customer Service Hotline, toll free, at 1-800-898-9020. Oneof our customer service representatives will try and resolve the problem for you. Ifnecessary you will be advised of the proper procedure to obtain a replacement unit.

Once again, thanks for selecting this Home Audio System from Emerson Research.

iPod® is a trademark of Apple Computer Inc., registered in the U.S. and other countries.


4

CLASS 1 LASER PRODUCT

This product contains a low power Laser Device.

IMPORTANT NOTES

3

Avoid installing this unit in places exposedto direct sunlight or close to heat radiatingappliances such as electric heaters, on topof other stereo equipment that radiates toomuch heat, places lacking ventilation ordusty areas, places subject to constantvibration and/ or humid or moist areas.Do not attempt to clean this unit withchemical solvents as this might damagethe finish. Use a clean dry cloth.

Operate controls and switches asdescribed in the manual.Before turning ‘On’ the power, makecertain that AC power cord is properlyinstalled.Store your CDs in a cool area to avoiddamage from heat.When moving the set, be sure to firstdisconnect the AC power cord.

NOTE: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.

FCC Information

This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.

CAUTIONINVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKSDEFEATED.

AVOID EXPOSURE TO BEAM

CLASS 1 LASER PRODUCTAPPAREIL Á LASER DE CLASSE 1PRODUCTO LASER DE CLASE 1

PREPARATION FOR USEUnpacking and Set-up

Protect Your FurnitureThis model is equipped with non-skid rubber ‘feet’ to prevent the product from movingwhen you operate the controls. These ‘feet’ are made from non-migrating rubbermaterial specially formulated to avoid leaving any marks or stains on your furniture.However certain types of oil based furniture polishes, wood preservatives,or cleaningsprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue onthe furniture. To prevent any damage to your furniture we strongly recommend thatyou purchase small self-adhesive felt pads, available at hardware stores and homeimprovement centers everywhere, and apply these pads to the bottom of the rubber‘feet’ before you place the product on fine wooden furniture.

The display carton contains the main unit, five (5) different iPod® adapters, and one(1) iPod® dust cover.Remove all of the components from the carton and make surethat nothing is accidental ly d iscarded wi th the packing mater ia ls.We recommend that, if possible, you save the carton and packing materials in theevent that your unit ever needs to be returned for service. Using the original cartonand packing materials is the only way to protect your unit from damage in transit.

Remove all packing materials from the main unit and the accessories.

Remove any descriptive labels from the front or top panels of your unit. Do notremove any labels from the back or bottom panels.

Remove any small strips of tape that may have been used to secure the CD doorand the secondary control cover door.

Open the CD door. Remove the dummy CD transit protection card from the CDmechanism.

Remove the “paper dummy iPod®” from the docking area.

Unwind the AC power cord and extend it to its full length.

Place the main unit on a stable, level surface such as a table, stand, or shelf,convenient to an AC outlet, out of direct sunlight, and away from sources of excessheat, dust, moisture, vibration, and strong magnetic fields.

•

•

•

•

•

•

•

•


• Replacement of batteries must be done by an adult.• Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.• The supply terminals are not to be short-circuited.• Non-rechargeable batteries are not to be recharged.• Exhausted batteries are to be removed.• Only batteries of the equivalent type are to be used.• Batteries are to be inserted with the correct polarity.• Dispose of batteries properly. Do not dispose of batteries in fire. The batteries may explode or leak.

Battery Precautions

65

Installing The Back Up BatteriesThis system includes a battery back up circuit that will maintain the clock and alarmtime settings in the event of a temporary power interruption. The battery back upcircuit requires 2 “AAA” or UM-4 batteries, not included. We recommend that youinstall a well-known brand of alkaline batteries for longest life and best performance.While it is not absolutely necessary to install the back up batteries it is stronglyrecommended. If you do not install the back up batteries it will be necessary to resetthe clock and the alarm settings each time the system is unplugged, or whenever youhave an unexpected power interruption in your home.

After installing the batteries replace the battery compartment cover and make surethat it is firmly locked in place.

Install 2 “AAA” batteries in the battery compartmentaccording to the polarity markings engraved in thecompartment. If the batteries are inserted incorrectlythe battery back up system cannot function.

Open the battery compartment by pushing the batterycover locking tab in the direction of the arrow and liftingthe battery compartment cover downward.

CAUTIONDANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

Power SourceThis system is designed to operate on 120V AC 60Hz house current only.Connecting this system to any other power source may cause damage to the systemand such damage is not covered by your warranty.NOTE: The system has polarized AC plug with one wide blade and one narrow blade.The plug will only fit into matching polarized AC outlets.

This is a safety feature to reduce the possibilityof electric shock. If the plug will not fit in yourAC outlets, you probably have an outdated non-polarized outlet. You should have your outdatedoutlet changed by a qualified, licensedelectrician. Do not file the wide blade on theplug, or use an adapter to make the plug fitinto your outlet. This defeats the safety featureand could expose you to electric shock.

NOTE: The battery compartment is located on the bottom of the cabinet. Beforeturning the unit upside down to install the back up batteries we suggest that you placea towel or similar padding under the unit to avoid scratching the finish on the top panelwhen the unit is upside down.


7 8

Front Panel

1.)2.)3.)4.)5.)6.)7.)8.)9.)10.)11.)12.)13.)14.)15.)16.)17.)18.)19.)20.)21.)22.)23.)24.)25.)26.)27.)28.)29.)30.)31.)32.)33.)34.)35.)

Side Panel

CD DoorCD Door OPEN PositionSNOOZE ButtoniPod® Dock PLAY/PAUSE Button SEARCH/SETTING Button STOP/ENTER ButtonFUNCTION Button POWER ButtonMENU/DISP. ButtonSLEEP Button REPEAT Button RANDOM ButtonPROG./CLOCK ButtonALARM 1 & ALARM 2 ButtonAC Power Cord.FM Wire Antenna.Battery Back-up Compartment.LED DisplaySpeakersPM IndicatorSLEEP IndicatorPOWER IndicatorFM STEREO IndicatorREPEAT IndicatorRANDOM IndicatorPROGRAM IndicatorALARM 1 Mode IndicatorALARM 2 Mode IndicatorVOLUME ControlLINE IN JackPHONES JackBand (AM/FM/FM ST.) SelectorTuning Dial Scale AreaTUNING Control

Top Panel

LOCATION OF CONTROLS AND INDICATORS


Listening to the Radio

1)Press the POWER button to turn the unit “on”. The POWER indicator comes “on” and the display will show “ ” few second to

9

OPERATING INSTRUCTIONS

10

• Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘live’. Do not use an outlet that is controlled by a wall switch.

Antenna InformationAMThe AM ferrite bar antenna is insidethe cabinet. If AM reception isunsatisfactory try turning the entireunit slightly until you find the directionthat provides the best reception forthe desired station.

FMMake sure the FM lead wire antennais extended to it’s full length. You mayhave to vary the direction of the wireantenna to find the position thatprov ides the best recept ion .

1)While the display is flashing, press and hold PROG./CLOCK button two second, “ ” flashing on display to select the clock format, press SEARCH/SETTING / button to select 12hr or 24 hr format.

Setting the Time of Day

2)Then press PROG./CLOCK button to enter the clock format, hour digit flashing, press SEARCH/SETTING / button to set the hour. Be sure to observe the PM indicator to set the hour correctly. If the PM indicator is “on”, the hour display is PM.

3)Then press PROG./CLOCK button again to enter the hour and minute digit flashing, press SEARCH/SETTING / button to set the minute.

4)Press PROG./CLOCK button again to install the adjusted time.

Setting the wake up time

The unit has two separate wake up alarm that can be set and used independently withdifferent alarm mode.

1)Press and hold ALARM 1 or ALARM 2 button. The display will change from the respective time of day to wake up time and hour digit flashing.

2)Press SEARCH/SETTING / button to set the wake up hour. Set correctly for AM or PM then press respective ALARM button to enter the wake up hour and minute digit flashing.

3)Press SEARCH/SETTING / button to set the wake up minute then press respective ALARM button to install the wake up time and display will return to correct time.

4)Adjust the VOLUME control to desired level.

Playing Compact DiscsNote: Although this CD player can read CD-R and CD-RW discs, in addition to normalCDs, however the playability of CD-R/RW discs may be affected by the type of softwarethat was used to create the discs, as well as the quality and condition of the blankmedia you are using. 100% playability cannot be guaranteed. This is not an indicationof a problem with the player.

• When the unit is plugged in for the first time the display will show flashing “ ” (AM).

mention unit in radio mode then display will return to correct time. (as unit default atradio mode at the beginning, so if the display didn’t show “ ”, press FUNCTIONbutton cyclic until display show “ ”).

2)Set the BAND selector (on right panel) to AM, FM or FM ST..

3)Turn the TUNING control to find the desired station, if select in FM ST. band and tune to a FM stereo station, the FM STEREO indicator comes “on”.

5)When you want to finish listening, press the POWER button to turn the unit “off”. The POWER indicator goes “off”.


4)Display show “ ” and flash while the player reads the table of contents of the disc then start to play the disc automatically, display will show “ ” for a few seconds then return to the correct time.

11 12

Normal playback1)Press the POWER button to switch the unit “on”. The POWER indicator comes on then press FUNCTION button cyclic until display show “ ”.

2)Open the CD door by pulling up the ‘OPEN’ on CD door.

NOTE : If the disc is inserted incorrectly or if thedisc is badly scratched and cannot read by theplayer, “ ” will appear on the display for afew seconds then returns to the correct time.

5) To Pause briefly during the playback press the PLAY/PAUSE button, the Cd track number flashes briefly and the sound stop, but the disc continues to spin. Press PLAY/ PAUSE button again to cancel pause and resume playback.

6) To skip forward or backward to other tracks, repeatedly press the or buttons until the desired track number appears in the display. Playback will begin on the selected track.

3)Press or button to select the track to be repeated. The selected track will be repeated continuously.

Repeat PlaybackYou can program the player to repeat a single track or the entire disc continuously.

One track repeat1)Play your disc as normal.

2)Press REPEAT button once, the display will show “ ” with the current track number for a few seconds then return to correct time, REPEAT indicator flashes, the current played track will repeated playback.

All tracks repeat

2)To cancel repeat playback, press REPEAT button until REPEAT indicator goes “off” or press STOP button.

1)Press REPEAT button twice, the display will show “ ” with the current track number for a few seconds then return to correct time, REPEAT indicator comes “on”, the entire CD will repeated playback.

High Speed Music SearchYou can search rapidly forward or backward within a track to locate a specific musicalpassage.Depress and hold the or button to begin high speed search. The display willshow the current track and the player moves rapidly forward or backward.When you reach the desired passage release the or button and normalplayback resumes.Note: The volume level is automatically reduced during high speed music search.

To Start Playback From A Specific TrackLoad your disc to the CD compartment, unit will play automatically after read TOC.Press the or buttons to select the desired track, playback will jump to theselected track and continue until the end of the disc.

3)Place your disc on the center spindle with the printed label side facing up and close the CD door.

7) To stop playback at any time press the STOP button. After the last track has played the disc stops automatically. Pull up the OPEN to open the CD door and remove your disc.


13 14

Random playbackTo listen the tracks on a disc in random order and this feature only can active at CDSTOP mode. If a disc is playing, press the STOP button to stop playback.

2)Display will show a random track number few seconds then return to the correct time and RANDOM indicator will comes “on”.

1)Press RANDOM button once, the until will start to play automatically with random mode.

1) Press the PROGRAM button. The PROGRAM indicator flashes and the display briefly shows “ ” with “ ” flashes indicating that you can select the first track to be programmed.

2) Press the or buttons to select the first track. The desired track number flashes on the display.

3) After each track has played once the player stops automatically. To cancel random playback at any time, press the STOP button.

Programmed PlaybackThe CD player in this unit has a 20 track programmable memory which allows youto program any disc to play just the tracks you want to hear in the exact order thatyou want to hear them. You may program a track or tracks to play more than once ifdesired.

Note: Programming can only be done while the player is in the Stop mode. Ifa disc is playing press the STOP button to stop playback before performing theprogramming steps below.

3) Press the PROGRAM button again. The selected track is entered in program memory number 01 and the display advances to “ ” with “ ” flashes indicating that you can select the next track to be programmed.

5) Repeat step 4 to program up to 20 tracks in the memory.

6) After you have programmed all the desired tracks, press the PLAY / PAUSE button to begin programmed playback. The PROGRAM indicator flashing. Play back will begin from the first track you programmed and continue until all programmed tracks have been played. Display return to correct time after few seconds.

4) Press the or buttons to select the next track to be programmed, and press the PROGRAM button to enter the track in the memory.

Notes:• After all programmed tracks have been played, the player stops but the program remains in the memory.Press the PROGRAM button and then press the PLAY / PAUSE button to begin programmed playback again.• To clear the program from the memory after the disc stops, press the PROGRAM button and then press the STOP button.Opening the CD door, pressing the POWER button to shut the unit ‘Off’, or by switching to the other function also clears the program.

Press PLAY / PAUSE to begin Program Repeat playback.

Program Repeat PlaybackYou may use the Program and Repeat features together to repeat a programmedsequence of tracks.Simply enter the desired tracks in the program memory as described, then press theREPEAT button twice to select ‘All Tracks Repeat’.

The REPEAT indicators will both come “on” andPROGRAM indicator flashes.

Line In Jack (Connection Cable Not Included)

This unit includes an LINE IN jack to allow youto connect external devices, such as aniPod® or portable MP3 player, and listen to themusic stored on your external device throughthe speakers of this unit.Connect the headphone jack of your externaldevice with the LINE IN jack located on the leftside of this unit. The connected cable is notincluded.


2) Set the HOLD switch of your iPod® to the “Off” position to unlock the clickwheel navigation controls.

The docking station in this system follows the Apple “Universal Well” design.This system is supplied with 6 different inserts that can be fitted in the docking station.One insert serves only as a cover for the docking area to keep the connector free fromdust when no iPod® will be connected for long periods of time. If you take youriPod® on a two-week vacation, place this “cover” in the docking area until you returnand use the system again.The other 5 inserts are designed for use with any 3rd generation (3G) or 4th generation(4G) dockable iPod® model, available as of January 2006, including the iPod Miniand the 1st generation (1G) iPod® nano.If you have either the 30GB or 60GB 5th generation (5G) iPod® with video capability,or the 2nd generation (2G) iPod® nano, use the insert that was included when youpurchased your iPod®. It will fit properly in the docking station of this system.

If you are using one of the 30GB or 60GB (5G) iPod® with video capability, or the(2G) iPod® nano, use the inserts that were included with the iPod® when you boughtthem.

Press the POWER button to switch the unit“on”. The POWER indicator comes “on” thenpress FUNCTION button cyclic until displayshow “ ” few seconds then will return tothe correct time.

After connecting your external device to the LINE IN jack, slowly adjust both the volumecontrols on this unit and your external device to find the desired setting. Please NOTEthat if the VOLUME control on this unit is set to a low level while the VOLUME controlon your external device is set too high, the sound will be distorted.

15 16

Play your iPod

1) Select the proper insert for your particular iPod® model from the “Chart” on page 18 and place the insert in the docking area as shown.

Playing your ‘Dockable’ iPod®

IMPORTANT

®

3) Place your iPod® into the insert in the docking area and make sure that it is fully seated on the connector.

5) Unit will start to play the song in the iPod® automatically.

4) Press the POWER button to switch the unit “on”. The POWER indicator comes “on” then press FUNCTION button cyclic until display show “ ” few seconds then will return to the correct time.

6) Use the PLAY/PAUSE, MENU, , and ENTER key to control your iPod® or / key to select your desired song form your iPod.

8) Press POWER button to switch “off” the unit.

7) To stop playback, depress and hold the iPod Play/Pause button until the Pod®

shuts off.


NOTE:-To prevent interference between the battery charging circuit and the radio in this system the battery charging circuit is turned off while you are listening to the radio. When you shut the radio off, battery charging resumes automatically.-Battery charging for Model iPod 3G is not available from this unit.

17

18

Charging the iPod® Battery

When your iPod® is connected to the docking station of this system, and the iPod® isnot playing, the iPod® battery will be recharged automatically. The battery will be chargedwhether the power of this system is “on” or “off”. It will be charged during CDplayback or while you are listening to an external auxiliary music source.


2) Press and hold the ALARM 1 and /or ALARM 2 button. The respective Alarm time Hour Digit will flash for checking/setting. Upon pressing the respective ALARM 1 and/or ALARM 2 button, the respective Alarm time Minute Digit will flash for checking/ setting.

20

3) Press respective ALARM 1 and/or ALARM 2 button cyclic until Alarm CD indicator comes on.

Wake To CD

2) Press and hold the ALARM 1 and /or ALARM 2 button. The respective Alarm time Hour Digit will flash for checking/setting. Upon pressing the respective ALARM 1 and/or ALARM 2 button, the respective Alarm time Minute Digit will flash for checking/ setting.

1) Playback the CD as usual and adjust the Volume level, then press POWER button to turn “off”.

5) To stop the CD immediately, press the POWER or respective ALARM button. The CD stops and the reset itself for the following day.

6) To cancel the alarm completely press the ALARM 1 and/or ALARM 2 buttons until the ALARM mode indicator disappears.

4) At the selected wake up time the CD turns “on” and the ALARM CD indicator flashes. It will continue for 60 minutes and the then “off” and reset itself for the following day.

Wake to iPod

1) Playback the iPod as usual and adjust the Volume level, then press POWER button to turn “off”.

7) Alarm system will change to wake to Buzzer automatically if no CD place to CD compartment or CD can’t read.

4) At the selected wake up time the iPod turns “on” and the ALARM iPod indicator flashes. It will continue for 60 minutes and the then “off” and reset itself for the following day.


5) To stop the iPod immediately, press the POWER or respective ALARM button. The iPod stops and the reset itself for the following day.

3) Press respective ALARM 1 and/or ALARM 2 button cyclic until Alarm iPod indicator comes “on”.

2) Press respective ALARM 1 and/or ALARM 2 button cyclic until Alarm buzzer indicator comes on.

1) Press and hold the ALARM 1 and /or ALARM 2 button. The respective Alarm timeHour Digit will flash for checking/setting. Upon pressing the respective ALARM 1 and/or ALARM 2 button, the respective Alarm time Minute Digit will flash for checking/setting.

Alarm OperationThis unit gives you the option of the waking to an electronic Buzzer alarm, the AM/FMRadio, CD player or iPod.

3) At the selected wake up time the electronic Buzzer turns “on”’ and the ALARM buzzer indicator flashes. It will continue for 60 minutes and the then “off” and reset itself for the following day.


Wake To Buzzer

4) To stop the buzzer immediately, press the POWER or respective ALARM button. The buzzer stops and the alarm reset itself for the following day.

Wake to Radio1) Select the desired wake up radio station refer to the Listening to the radio section.

3) Press respective ALARM 1 and/or ALARM 2 button cyclic until Alarm Radio indicator comes “on”.

2) Press and hold the ALARM 1 and /or ALARM 2 button. The respective Alarm time Hour Digit will flash for checking/setting. Upon pressing the respective ALARM 1 and/or ALARM 2 button, the respective Alarm time Minute Digit will flash for checking/setting.

4) At the selected wake up time the radio turns “on” and the ALARM indicator flashes. It will continue for 60 minutes and the then “off” and reset itself for the following day.


5) To stop the Radio immediately, press the POWER or respective ALARM button. The Radio stops and the reset itself for the following day.

19


22

IMPORTANT! Before you put on your headphones please reduce the volume controlof this system to a low level. Then put your headphones on and graduallyincrease the volume to a comfortable listening level. Remember that CDs and digitalmusic files can contain both very soft and very loud passages. You should adjust thevolume control to a comfortable level while listening to a louder passage so that youwill not experience any discomfort caused by any sudden increase in volume level.The headphones must be disconnected from the Phones jack in order to listen to theinternal speakers again.

Stereo Headphone JackThis system includes a 3.5mm mini stereo headphone (Phones) jack on the left panelso that you can listen privately without disturbing others. When the headphone (notincluded) is connected to the Phones jack of this system the internal speakers areautomatically shut off.

TROUBLE SHOOTING GUIDEShould this unit exhibit a problem, check the following before seeking service.

Possible Cause

Station not tuned properly forAM or FM.FM: FM Wire antenna is notextended.AM: The bar antenna is not

positioned correctly.You have tunes to a monostation.FUNCTION switch is not setto AM or FM ST.Volume at minimum.

FUNCTION switch is not setto CD.CD is not installed orinstalled incorrectly.Disc is dirty or scratched.

iPod mode is not selected.

Solution

Retune the AM or FMbroadcast station.Extend FM Wire antenna.

Reposition the unit until best

reception is obtained.Select another FM stereostation.Set FUNCTION switch to AM orFM ST. as desired.Increase Volume.

Set FUNCTION switch to CD.

Insert CD with label side up.

Wipe disc with cloth or use

another dise.

Ensure an iPod is connectedto the unit.

®

® ®

SymptomRadioNoise or sounddistorted in AM or FMbroadcasts.

FM ST. indicator doesnot light.AM or FM, no sound.

Compact Disc PlayerCD Player will not play.

CD skips while playing.

iPodiPod does not play.

Snooze/Repeat AlarmAfter the alarm turns on in the morning you can press the SNOOZE button for afew extra minutes sleep. The alarm will stop for approximately 9 minutes and thencome on again. Snooze operation can be repeated several times if desired, but afterone hour the alarm will not turn “on” again.

NOTE:- If you set the sleep time for either 120, 90 or 60 minutes and you are playing a CD that only 48 minutes long, playback will stop at the end of the disc.- Sleep and alarm mode can set to different mode.- If sleep time “ ” was selected, unit will change to “on” mode from sleep mode .

Sleep To Music TimerYou can use the sleep timer to fall asleep to the Radio, CD player or iPod® for 120, 90,60, 30, or 15 minutes and have the unit shut off automatically.

1) Press the SLEEP button to cyclic to select the sleep timer time between 120, 90, 60, 30, 15, 00 minutes and this time will show on display with POWER and SLEEP indicator and the unit will turns on automatically.

2) Display will show the previous function mode and start to play, press FUNCTION button to change to your desired sleep mode, then display will return to the correct time.

3) To stop the unit before the sleep timer counts down to ‘00’, press POWER button to the unit ‘off’.

7) Alarm system will change to wake to Buzzer automatically if no iPod® inserted tothe unit.

21


23

TO FIND THE LOCATION AND PHONENUMBER OF YOUR NEAREST SERVICECENTER PERMITTED TO PERFORMWARRANTY...

CALL TOLL FREE: 1-800-695-0098

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCEPLEASE CALL:1-800-898-9020

FOR CUSTOMER SERVICE, PLEASE WRITE TO:Emerson Radio Corp.,

Consumer Affairs Dept.,5101 Statesman Drive,

Irving, TX 75063.

Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents orabrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.Never write on or affix labels to the surface of compact discs.

To remove a disc from its storage case, press down on the center of the caseand lift the disc out, holding it carefully by the edges.

CARE AND MAINTENANCECOMPACT DISC CARE

Fingerprints and dust should be carefully wiped off the disc’s recorded surfacewith a soft cloth. Unlike conventional records, compact discs have no grooves tocollect dust and microscopic debris, so gently wiping with a soft cloth should removemost particles. Wipe in a straight line from the inside to the outside of the disc.Small dust particles and light stains will have absolutely no effect onreproduction quality.

CARE OF THE CABINETIf the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,polish sprays, or abrasive cleaners on the cabinet.

CAUTIONNever allow any water or other liquids to get inside the unit while cleaning.iPod® Docking CoverIf no iPod® will be connected to the system for a long period, place the iPod® dockingcover insert over the iPod® docking well to prevent excess dust from settling on theconnector.

24


iC2196-801-01 Printed in china25

LIMITED WARRANTYEmerson Radio Corp. warrants manufacturing defects in original material, including

original parts and workmanship, under normal use and conditions, for a period of

ninety (90) days from the date of original purchase in the U.S. With your dated proof

of purchase, we will provide repair service at no charge for labor and parts at an

authorized Depot Repair Facility, or replace the product in our discretion. For repair

or replacement, pack your unit in a padded box, enclose your check or money order

payable to Emerson Radio Corp. in the amount of $9.00 (not required by California

residents) to cover shipping and handling costs, and enclose a copy of your proof of

purchase. Send your unit to:

Emerson Radio Corp.,

5101 Statesman Drive,

Irving, TX 75063.

This warranty does not cover damage from negligence, misuse, abuse, accident,

failure to follow operating instructions, commercial use, rental, repairs by an

unauthorized facility, or products purchased, used, serviced or damaged outside of

the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU 898M

The Serial Number can be found in the bottom cabinet. We suggest that yourecord the Serial Number of your unit in the space below for future reference.

Model Number : iC2196

Serial Number :


CRD-2196A IB EMER 001 REV0 GB · There’s an integrated iPod® docking station right up front that...

Documents

Transcript of CRD-2196A IB EMER 001 REV0 GB · There’s an integrated iPod® docking station right up front that...