CONTROL YOUR CLIMATEIn your Telecom networks

With more than 20 years of developing and producing cooling solutions for the Telecom industry, Dantherm knows the business and the challenges that network operators and suppliers meet every day.

We use this know-how to make complete cli-mate control solutions, which ensure reliable networks, drive down costs and protect temperature-sensitive electronic and telecommunications equipment.

This makes Dantherm the preferred partner for electronics cooling and substantiates our position as the leading global supplier of climate control solutions.

GLOBAL ONE-STOP-SHOPFor customised Telecom cooling solutions

COMBO COOLING

DC AIR CONDITIONING

COMPARTMENT COOLING

THERMOSIPHON HEAT EXCHANGE

FREE COOLING

INTELLIGENT CLIMATE CONTROL

HEAT EXCHANGE

SPLIT DC AIR CONDITIONING

FREE COOLINGMost energy-efficient climate control solution

Cost-effective total heat managementFree Cooling is cost-effective controlled ventila-tion: The Telecom shelter or enclosure is cooled by means of ambient air without a compressor. Dantherm Free Cooling solutions operate with an overpressure delivering filtered air into the room, thereby ensuring a clean environment for the radio transmission equipment.

The Flexibox units generate documented energy cost savings of up to 90 % on cooling at Telecom sites hosting GSM, UMTS or LTE networks. Scan the code below to calculate your estimated energy savings or get non-binding, site-specific energy counselling.

Flexible cooling solutionsDantherm Flexibox is available for indoor and out-door mounting, with AC and DC power and suits both new and existing sites. Dantherm Displace-ment Free Cooling is designed for cost-effective, low-noise cooling in small rooms with stagnant air. Dantherm TKS60 is developed for high-capacity free cooling of large shelters with cooling needs up to 12kW.

Suitable for challenging climatesDantherm Free Cooling solutions generate savings and maintain stable operation in regions with extreme humidity, heat, cold and heavy contami-nants in the air. Visit our website to learn more.

FEATURES AND BENEFITS

Radio base stationsTelecom sheltersElectronics enclosuresHybrid Telecom sitesNetwork and computer roomsPower supply rooms

APPLICATIONSFEATURES AND BENEFITS

Significant, continuous OPEX savingsEasy and flexible installationLow total cost of ownershipHigh return on investmentIntelligent climate controlRemote surveillance and configuration

Flexibox Free Cooling TKS60 High-Capacity Free Cooling

DisplacementFree Cooling

Reduce CO2-emissions and operating costsBoth carbon dioxide emissions and operating costs are getting increased attention in the Tele-com industry. Dantherm’s Combo Cooling solution generates optimum savings, reduces your carbon footprint and ensures minimum down-time at your site.

Dantherm has re-thought the concept of Combo Cooling, creating a solution that combines Free Cooling and Air Conditioning to provide the most energy-efficient cooling and generate significant savings. The units are designed to run Free Cooling only, unless very high ambient temperatures require backup Air Conditioning.

COMBO COOLINGTotal heat management in challenging environments

The Dantherm Combo Cooling units are easy and safe to put in use and provide total heat manage-ment, automatic operation and control of Free Cooling, re-circulation, mixing function, Air Con-ditioning, humidity control, fire emergency shut-down and optional connection of a heater.

Continuous developmentWith every business case come new requirements to meet our customers’ needs. Our Combo Cooling units have been running in the field for more than 20 years. Continuous development of the solution ensures the high standard needed to support the quality of your services.

Radio base stationsTelecom sheltersElectronics enclosuresHybrid Telecom sitesNetwork and computer roomsPower supply rooms

APPLICATIONS

FEATURES AND BENEFITS

Intelligent micro processor controller: Free Cooling first priority - backup Air Conditioning High-capacity Free Cooling, Air Conditioning Emergency cooling and redundancy in case of power or air conditioner outage Heating and humidity detector are optional Compact filter in Free Cooling mode ensures clean indoor environment Easy installation in indoor/outdoor shelters and cabinets Dantherm-developed protection against water, sand, leaves and snow: AirMaze

DC AIR CONDITIONINGIndustry-leading solution for small off-grid sites

Stable site uptime and continued earningsSites with battery back-up power and hybrid sites powered by renewable energy sources such as solar, wind, fuel cells or hydro are only as reliable and profitable as the climate control solution protecting the electronic equipment inside it.

The Dantherm DC Air Conditioners are designed to ensure the reliability of sensitive electronic equip-ment in challenging outdoor environments.

The units are made from quality components to ensure a long service life. Soft-startup prevents the typical start-up inrush current as seen by AC compressor drives. Finally, they are built to run on battery backup ensuring full site uptime, even during power outage or intermittent power.

Energy-efficient and flexible DC coolingDantherm DC Air Conditioners are true DC Air Con-ditioners which eliminate the need for an inverter.Because our DC Air Conditioners are capacity regulated, they only provide the exact amount of cooling needed. This means that they are much more efficient in use than traditional DC Air Conditioners and Air Conditioners that use a 230V-48V inverter.

Ideal for battery coolingThe Dantherm DC Air Conditioner has a fixed cooling set point of 25°C, making the unit highly suitable for battery compartment cooling. Settings and status can be monitored remotely, and the slim-line design ensures fast and flexible installa-tion in applications with limited space.

Radio base stationsTelecom sheltersElectronics enclosuresHybrid Telecom sitesNetwork and computer roomsPower supply rooms

APPLICATIONS

FEATURES AND BENEFITS

Highly energy-efficient Closed loop cooling Emergency cooling in case of power outage Low voltage disconnect prolongs battery life Safe and quick plug-and-play installation Built-in Dantherm controller Built-in RS232/RX485 connection Ready for Dantherm Remote Climate Control

SPLIT DC AIR CONDITIONINGHigh-capacity solution for off-grid sites with limited space

Ensure site uptime and earningsSites with battery back-up power and hybrid sites powered by renewable energy sources such as solar, wind, fuel cells or hydro are only as reliable and profitable as the climate control solution protecting the electronic equipment inside it.

The Dantherm Split DC Air Conditioners are desig-ned to ensure the reliability of sensitive electro-nic equipment in remote sites with high cooling requirements.

The units are made from quality components to ensure a long service life. Soft-startup prevents the typical start-up inrush current as seen by AC compressor drives. Finally, they are built to run on battery backup ensuring full site uptime, even during power outage or intermittent power.

Energy-efficient and flexible DC coolingDantherm Split DC Air Conditioners are true DC Air Conditioners which eliminate the need for an inverter. Because our Split DC Air Conditioners are capacity regulated, they only provide the exact amount of cooling needed. This means that they are much more efficient in use than traditional Split DC Air Conditioners and Air Conditioners that use a 230V-48V inverter.

Low energy use and easy installationOur Split DC Air Conditioners meet cooling needs up to 3.5 kW and are ideal for sites with onsite power sources, because they are soft starting and thus require very little energy to activate. Settings and status can be monitored remotely and the split design ensures fast and flexible installation in applications with limited space.

Radio base stationsTelecom sheltersElectronics enclosuresHybrid Telecom sitesNetwork and computer roomsPower supply rooms

APPLICATIONS

FEATURES AND BENEFITS

Highly energy-efficient Closed loop cooling Ideal for all-DC setups Emergency cooling in case of power outage Low voltage disconnect prolongs battery life Safe and quick split installation Built-in Dantherm controller Ready for Dantherm Remote Climate Control

THERMOSIPHON HEAT EXCHANGEEfficient passive cooling in small applications

Next-generation heat exchangers Thermosiphons are the most energy-efficient climate control solutions on the market, next to Free Cooling. Thermosiphons are next-generation heat exchangers, because they have a more compact way of generating heat exchange than traditional air-to-air heat exchangers. In other words, Ther-mosiphons provide a higher cooling capacity in a smaller unit.

The fully industrialised Dantherm DC Thermo-siphons are operated with control strategies based on our co-operation with the Telecom industry’s most important suppliers, vendors and operators. The control strategy is focused on transmission up-time even during installation, service, power outage or extreme ambient conditions.

Ideal for coastal areasFilters are not needed for the Dantherm Thermo-siphon solutions, because the closed loop cooling units protect the equipment entirely from dust, sand or moisture.

The Dantherm Thermosiphon is suitable for Tele-com equipment and electronics cooling where the climate must be strictly controlled 24 hours a day, 365 days a year, e.g. in coastal areas.

FEATURES AND BENEFITS

High cooling performance Up to 80 % documented energy savings Cooling without a compressor Ensures a clean environment for sensitive electronic equipment No filter needed Less than 2 years return on investment

Radio base stationsTelecom cabinetsElectronics enclosuresHybrid Telecom sitesPower supply roomsNetwork and computer roomsUPS and battery roomsDrive stationsAutomation control cabinets

APPLICATIONS

HEAT EXCHANGEEnvironmentally friendly air-to-air heat exchange

Reliable performance for small heat loadsThe line of Dantherm air-to-air heat exchangers is designed for reliable, energy-efficient climate con-trol in challenging outdoor environments. They are ideal for coastal areas, because of the closed loop design, protecting the system completely from the outside environment.

Stepless fan speed control ensures that the inter-nal temperature is kept at the exact level neces-sary to protect and prolong the service life of the electronic equipment in the cabinet. The air-to-air cooling method is highly environmentally friendly and thus contributes to lowering your carbon footprint.

Fast installation and low noise levelA light-weight plastic core ensures easy, fast and low-cost installation i.e. on shelter doors.

Improved performance, low power consumption and reduced noise emissions make the Dantherm Heat Exchanger a very good choice for small heat loads in cabinets and enclosures placed both in- and outdoors.

The units consist of quality components to ensure the long service life and reliability demanded by leading Telecom companies.

FEATURES AND BENEFITS

Unique cooling strategies Cost-effective closed loop cooling system Quick and easy installation and maintenance Efficient and reliable radial fans Stepless fan speed control Compact construction For plastic cores: light Power supply 48 VDC

Radio base stationsTelecom sheltersElectronics enclosuresDrive stations Bill boards/displaysAutomation control cabinets

APPLICATIONS

COMPARTMENT COOLINGDual-zone compartment and battery cooling

FEATURES AND BENEFITS

Optimum battery lifeMinimum energy consumptionSuitable for coastal areas

Active cooling is only started when necessaryDantherm Remote Climate Control available as an accessory

Dual climate zones create higher savings Maintaining low temperatures in a compartment and higher temperatures in the remaining shelter/cabinet leads to substantial energy savings.

Dantherm’s dual-zone cooling strategy is a cost-saving alternative to traditional large-scale cooling, which normally leads to high energy costs for applications with different cooling needs.

Multiple small-scale cooling optionsDantherm offers Peltier TEC and DC Air Condi-tioner solutions for small compartment cooling and recommends combining these with either of the two passive cooling solutions Flexibox Free Cooling or Thermosiphon Heat Exchange.

Optimum temperatures for all equipmentThe basic method of dual-zone compartment and battery cooling is to divide the shelter/room into two temperature zones.

In the smaller compartment, active cooling is only initiated when necessary, and a higher tempe-rature is maintained in the remaining room by means of energy-efficient passive cooling. This generates the desired climate conditions for all enclosed equipment, using a minimum of energy.

In addition to ensuring more energy-efficient climate control, dual-zone compartment cooling prolongs the service life of all enclosed equipment including temperature-sensitive batteries.

FEATURES AND BENEFITS

Telecom shelters Battery compartmentsDual climate zone cabinetsHybrid Telecom sitesNetwork and computer roomsUPS stations

APPLICATIONS

Controllers make the real difference A site-specific cooling solution is the way to begin reducing your energy bill intelligently, but the actual intelligence lies in the control of the units. That is why we have developed a line of controllers with intelligent control strategies, meaning that each controller solution is designed to control our product solutions according to the exact conditions at your site.

In other words, your equipment is protected according to customised settings, taking into consideration that your energy savings potential is fully utilised.

Unique control strategies for all scenariosDantherm’s controllers are all intelligent solutions that create the best possible climate conditions and savings at your site. The line features micro-processor-based climate controllers intended for controlling fan motors, dampers, compressors, air conditioning systems, heaters, redundancy cooling, emergency cooling and much more.

The Dantherm CC3000 and Dantherm Remote Cli-mate Control are state-of-the-art communication gateways and server solutions that provide secu-rity of operation by means of remote surveillance and change of settings online.

INTELLIGENT CLIMATE CONTROLCustomised control strategies optimise savings

FEATURES AND BENEFITS

Optimum protection of your equipmentIntelligent control of your cooling solution Savings potential fully utilisedOperational safety: remote control State-of-the-art controller solutions

FEATURES AND BENEFITS

Free Cooling Combo CoolingDC Air ConditioningCompartment CoolingThermosiphon Heat ExchangeHeat Exchange Air Conditioning

APPLICATIONS

Non-binding savings counselling

t

Dantherm A/SMarienlystvej 65 | DK-7800 Skive Tel. +45 96 14 37 00 | Fax +45 96 14 38 20info@dantherm.com | www.dantherm.com

ABOUT THE DANTHERM GROUP

Control your climate

The Dantherm Group is a leading provider of climate control products and solutions. The group companies have more than 60 years of experience in designing and manufacturing high-quality and energy-efficient equipment for heating, cooling, drying and ventilation for a wide range of mobile and fixed applications.

Every year, Dantherm Group uses significant resources on product development to stay in the forefront and is constantly adapting the products to changing market demands and legislation.

The Dantherm Group has a number of strong brands with well-established market positions in the mobile, pool, commercial/industrial and residential markets.

Dantherm Group customers benefit from our comprehensive knowledge base and the experience and expertise that we have gained from more than three million climate control products and solutions sold worldwide.

Global reach

The Dantherm Group is headquartered in Skive, Denmark and has its own market presence in Norway, Sweden, United Kingdom, Germany, Switzerland, Italy, Spain, Poland, Russia, China and United Arab Emirates.

In 2016 the Dantherm Group was acquired by the Swedish equity fund Procuritas Capital Investors V LP – a strong owner with the ambition to continue the development and growth of the company.