Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands...

36
©Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands

description

Returns the status of the magnetic field of the RWM

Transcript of Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands...

Page 1: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

©Contrinex 2013 - JDCPPT_HF_RWMTAGCommands

HF RWM and TAG Commands

J.-D. Chatelain

HF RWM CommandsHF TAG Commands

Page 2: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Allows to activate or to deactivate the magnetic field of the RWM

Page 3: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the status of the magnetic field of the RWM

Page 4: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Stores two bytes at a specified address of the memory of the RWM

Page 5: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Reads the block (two bytes) at the specified address of the memory

Page 6: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns information on the firmware and the type of the RWM

Page 7: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Each RWM stops to scan the transponders in front of it. RWMs come out from this mode as soon as a command is sent on the fieldbus.

Page 8: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Restarts the RWM

Page 9: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Defines the logical address of the RWM.

Page 10: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the address of the RWM in decimal.

Page 11: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Defines the mode (physical or logical) of addressing the RWM.

Page 12: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the addressing mode of the RWM

Page 13: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Activates or deactivates the protection mode of the RWM.

Page 14: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the status of the protection mode of the RWM

Page 15: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

HF RWM and TAG Commands

J.-D. Chatelain

HF RWM CommandsHF TAG CommandsExit

Page 16: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Reads the specified number of blocks (and protection code of each block if option flag = 1) starting from the specified address

Page 17: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Writes the specified number of blocks of data starting from the specified address in the transponder(s) concerned.

Page 18: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Protects definitively against writing the selected blocks

Page 19: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Set the concerned transponder in the "Quiet state".

Page 20: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Set the concerned transponder in the “Selected state".

Page 21: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Set the concerned transponder(s) in the "Ready" state.

Page 22: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Writes AFI (Application Family Identifier) code in the transponder(s) concerned.

Page 23: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Protect definitively against writing the AFI code in the concerned transponder(s).

Page 24: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Writes DSFID (Data Storage Format IDentifier) code in the transponder(s) concerned.

Page 25: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Protect definitively against writing the DSFID code in the concerned transponder(s).

Page 26: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the specific characteristics of the transponder

Page 27: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Commands to the transponder to return a random number

Page 28: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Sends the encrypted password to the transponder in order to unlock it.

Page 29: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Modification of the passwordA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 30: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Locks, in an irreversible way, the specified passwordA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 31: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Activates definitively a password of 64 bits made up of the read and write passwordsA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 32: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Protects the specified pages in accordance with the desired protection statusA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 33: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Locks, in an irreversible way, the protection conditions of the page concernedA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 34: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Returns the protection state of the specified blocks

Page 35: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

Deactivates, in an irreversible way, the transponder which will not answer any command any moreA login (“Get Random Number” followed by “Set Password”) is mandatory before this command

Page 36: Contrinex 2013 - JDC PPT_HF_RWMTAGCommands HF RWM and TAG Commands J.-D. Chatelain HF RWM Commands HF TAG Commands.

©Contrinex 2013 - JDCPPT_HF_RWMTAGCommands

HF RWM and TAG Commands

J.-D. Chatelain

End of this chapter