Continuous Emission monitoring systEms

EnvironnEmEnt S.A is a world-wide designer and manufacturer of high-precision measuring instruments and analysers approved by international institutes and authorities.

We are committed to provide Best Available techniques (BAt) and highest quality products and services for main continuous monitoring applications :

• Air Quality monitoring Systems (AQmS)

• Continuous Emission monitoring Systems (CEmS)

• Engine Exhaust Gas monitoring System (EGAS)

• Water Quality monitoring System

• radionuclide monitoring System

• Engine Exhaust Gas monitoring System (EGAS)

• Water Quality monitoring System

• radionuclide monitoring System

With more than three decades of activity and experience, our brand name has become internationally renowned and is identified as image of accuracy, reliability, leading-edge technology and innovation. Environnement s.A are committed to research and innovation permanent investment for developing new products to meet the ever-changing technical and regulatory needs of our industry.

our broad analysis products range is also supported by one of the largest worldwide sales and service organizations, through a dynamic and expert network of nearly 80 Companies and Partners. this strong international presence is further supported by our corporate-owned subsidiary organisations in italy, germany, China, india and the united states of America.

Environnement sA’s factory trained Field service team provides expert services (hands-on and technical support) for your equipment all over the world.

As supplier to the environmental fields, we integrate environmental factors into our day-to-day activity. this has resulted in the development of Quality and Environment management systems that meet the requirements of iso standards 9001 and 14001.

EnvironnEmEnt S.A is a world-wide designer and manufacturer of high-precision measuring instruments and analysers approved by international institutes and authorities.

We are committed to provide Best Available techniques (BAtechniques (BAtechniques (BA ) and highest quality products continuous monitoring applications :

Continuous Emission Continuous Emission Continuous Emission Continuous Emission Continuous Emission

111 boulevard robespierreBP 84513 - 78304 Poissy Cedex - Francetél. : +33 (0)1 39 22 38 00 - Fax : +33 (0)1 39 65 38 08

www.environnement-sa.com

contact : info@environnement-sa.com

EnvironnEmEnt S.A, leading analyser manufacturer, designs and produces a complete range of state of the art analysers, sampling systems, data acquisition and software’s for the measurement and reporting of regulatory pollutants such as: HCi, So2, no, no2, nox, n2o, Co, Co2, CH4, tHC, nmHC, toC, nH3, HF, H2S, trS, o2, H2o, temperature, Flow, Pressure, Particulates, mercury, Furans, Dioxins...

AmEsA® on stack mir 9000 Blue Box insitu mir is sEC box on stack mir 9000 analysers mir Ft rack cabinet

With many years of industrial experience, our turnkey systems are designed and engineered to provide a complete solution-driven approach from extraction of the sample, analysis, system build through the data acquisition and reporting. Each turnkey system is fully configured to meet the ever-changing technical or regulatory needs of our industry or your company’s challenges.

2S, S, 2, H2 , emperature, Flow, Pressure, Particulates, ercury, Furans, Dioxins...

WEX software(DAS-CAS)

Sampling Lines • Dry, not heated• Heated

Flue gas treatment

FurnaceBoiler

Turbine Process...

Sampling and Conditioning Systems• Dilution (MDS Series)• Dry extractive (SEC)• Hot extractive (HOFI / LCPD)Optional: built-in Flow, Temperature, Pressure

In situ analysers (MIR IS)

Analysis principles• FTIR (MIR FT)• NDIR GFC / HEATED NDIR GFC (MIR 9000, MIR IS, CO12M / MIR 9000H)• FID / HEATED FID (HC51M / Graphite 52M)• CLD / HOT CLD (AC32M / Topaze 32M)• UVFluorescence (AF22M)• UV Absorption (O342M)

Particles analysersBETA 5M / Optical analysers)

Continuous dioxin / furansampling system (AMESA)

Stack testing «portable» analysers(Graphite 52M / MIR 9000 CLD)

A/C Shelters and Cabinets

GAS SAmPlinG SyStEmS

DIL-1 / MS-1 SEC BOX HOFI BOXHOFI BOX

no matter what your process conditions are (hot, wet, dusty), we can offer the most suitable sampling solution :

The dilution systemIdeal for mid-high to high concentrations or for sampling locations in hazardous areas

The dry permeation techniqueDesigned to meet almost all gas sample conditions using exclusive dry sampling method : ideal for sampling of corrosive gases

The hot filtration techniqueDesigned to feet almost all gas sample conditions using heated sampling universal method: ideal for sampling of corrosive gases

• Dilution probes available in different lengths and materials to suit the sample conditions

• selectable orifice size for different ranges of dilution ratios

• sample transfer up to 150 m (diluted / clean & dry sample) by non-heated sampling line

• Fluid control unit for management of 1 to 4 Dilution probes

• span gas injection at the sampling point• Automatic backflush function included

to be used with low concentration analysers (AC32m / Co12m / AF22m / HC51m) or with mir 9000.

• Heated probe with a choice of materials and Probe lengths to suit the application

• Double stage particle filtration • Built-in exclusive permeation sample dryer

system• sample transfer up to 100 m ( Clean & dry

sample) by non-heated sampling line • suitable for sample transfer of high soluble

gases• span and zero gas injection at the sampling point • Fitted with automatic backflush function

to be used with non heated analysers such as mir 9000, mir 9000 CLD

• Heated probe with choice of materials and Probe lengths to suit the application

• Double stage particle filtration • sample transfer up to 50 m (Clean & wet

sample) by 140-180°C heated line • Longer heated sampling line available

on request• span and zero gas injection at the sampling

point • Automatic backflush function

to be used with heated analysers such as mir Ft, mir 9000H, graphite 52m, topaze 32m

Wide range of sampling probes available for sEC and HoFi boxes, selection is depending on process conditions (humidity, temperature, dust, stack diameter…)

All probes are available with DtP option (temperature, flow rate and pressure measurement)

All our gas sampling systems can be used with dry or heated mVs multiplexing solutions (2 to 4 channels)

• refineries• Chemical process • Power plant using diesel engines...

mAin APPliCAtionS :• Waste incineration (municipal Energy from Waste or industrial) • sludge incineration • gas turbines • Power Plant • Boilers • Paper mills • glass industry • Petro chemical • Chemical industry • Cement Plants …

APPliCAtionS :

• First, we review and study your monitoring requirements.• next, we design, engineer and manufacture the best solution to meet your specific needs.• Prior to shipment we perform a factory acceptance test of the complete system

to ensure highest quality and optimal performance.• Finally, we perform commissioning and start-up of your CEms.• From CAD drawings to assembly, testing and commissioning, we provide the complete

engineered solution. Our commitment to your satisfaction continues beyond installation• After your CEms is installed, you can rely on our technical staff for on-site user training,

certification testing (rAtA), direct and fast access to spare parts and all necessary support you may require.

• to ensure maximum performance, you can also select routine monthly, quarterly or yearly maintenance contracts, including QA/QC audits required by regulatory agencies.

Our solutions are in compliance with latest regulations and standards (2010/75/UE Directive, 2000/76/EC Directive, 2001/80/EC Directive, EN 14181, EN15267-3….)

Our solutions are worldwide approved and certified (TÜV, MCERTs, CEN, US EPA, NF, J-MOE, KEMA...)

tAiLorED DEsign AnD EnginEEring oF your CEms ProjECts

o be used with low concentration analysers o be used with low concentration analysers (AC32(AC32mm / C / Coo1212mm / AF22 / AF22m / HC51m) or with mirmir 9000. 9000.

•• rrefifineriesneries•• Chemical process Chemical process • Power plant using Power plant using diesel engines... diesel engines...

AAPPPPliliCACAtiontionCAtionCACAtionCA S S ::

ExtrACtivE multi-GAS AnAlySErS

ExtrACtivE, SPECiFiC AnAlySErSMIR 9000 BLUE BOX

ExtrACtivE, SPECiFi

MIR 9000

AnAlySErS

MIR 9000 CLD MIR FT

Multi-Gas Infrared GFCOffers excellent performance for multiple gas measurements, including HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4 (TOC), HF, N2O and O2

Multi-Gas Infrared GFCProfitable package for online analysis of mid-high ranges of SO2/NOx/CO/CO2/O2 in Biomass, Boilers and Power plants applications

Multi-Gas Infrared GFC fitted with optional CLD benchUses the standard reference method SRM for the simultaneous measurement of NO, NO2, NOx, CO, CO2 and O2 in a single analyser

Fourier Transform Infrared Multi-Gas AnalyserBased on a leading edge technology for simultaneous, multi-gas measurement of: HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4

(TOC), NH3, HF and H2O

Heated Infrared GFCUses the heated Infra-Red Gas Filter Correlation technology, the MIR 9000H is a perfect multi-gas analyser for DeNOx (SCR/SNCR) applications.

• over 1500 installations world wide, covering many applications and industries

• Designed to measure dry and corrosive sample

• Fast and simultaneous measurements of up to 10 gases

• measurement is on a dry basis• Automatic cross interference correction• Highly accurate, excellent stability

with automatic optical stability check• intrinsic security with on-board residual

H2o measurement• on-board paramagnetic cell for long term

o2 measurement• Available in 19’’ rack or tight box version • MCERTs and TÜV certified to En15267-3• QAL1 as defined by En14181• QAL3 compliance to En14181

• Fast response time, designed to measure wet and corrosive sample

• up to 191°C heated detector for HC measurement

• integrated zero air catalyser• MCERTs certified

• Chemiluminescence standard reference method (srm) for low & ultra low nox

• infra-red gas Filter Correlation for Co, Co2 and on-board Paramagnetic for o2

• Designed to measure dry and corrosive sample

• Fast and simultaneous measurements of up to 10 gases (so2 / n2o can be added to ir gFC module)

• measures is on a dry basis• Automatic cross interference correction• Highly accurate, excellent stability

with automatic optical stability check• intrinsic security with on-board residual

H2o measurement• MCERTs and TÜV certified to En15267-3• QAL1 as defined by En14181• QAL3 compliance to En14181

• multicomponent measurement capability (from a library of 50 gases)

• Designed to measure wet and corrosive sample

• 180°C heated measurement cell • Fast and simultaneous measurements

of up to 14 gases• Automatic spectral interference correction• Automatic cross-interference • reproducible and accurate • Excellent calibration stability• High sensitivity heated sample cell• MCERTs certified to En15267-3• QAL1 as defined by En14181• QAL3 compliance to En14181• Compliant with U.S. EPA 40 CFr Part 60

Appendix B - Performance specification 15.

• Designed to measure wet and corrosive sample

• Perfect analyser for ammonia slip detection• 180°C heated measurement cell• ultra fast response time• simultaneous and continuous multi-gas

and H2o measurement available• Automatic spectral interference correction• reproducible and accurate • Excellent calibration stability• robust and reliable design built into

a stainless steel tight box for withstanding the harshest industrial environments

• Compliant with QAL1 of En14181 & En15267-3

APPliCAtionS:• Waste incineration: municipal, Domestic, industrial, special, Hospital, … • Power & Combustion Plants • gas turbines • Biomass • Cement Kilns • Pulp & Paper • Denox (snCr, sCr) • industrial Boilers & Furnaces in Chemical & Petrochemical Plants • Process Control • Accredited testing Laboratories

Heated, specific analysersmir 9000H

• stainless steel sampling probe with heated filtration, integrated in a specific LCPD box

• Clean, hot and wet sample transfer up to 50m• Possible backflush & span gas injection• sampling treatment by cooler • Fast and simultaneous measurement of up to

6 gases by ir-gFC technology combined with on-board paramagnetic cell for o2

• Zero gas adjustment by ambient air • reliable measurement on a dry basis• Automatic cross interference correction• MCERTs and TÜV certified to En15267-3• QAL1 as defined by En14181

Heated Flame Ionisation Detection Graphite 52M analyser is fitted with FiD for continuous and simultaneous measurement of total Hydrocarbons (tHC), non-methanic Hydrocarbons (nmHC) and methane (CH4)in compliance with En12619

Heated ChemiluminescenceTopaze 32M utilises the CLD for continuous and simultaneous measurement of no, no2 and nox in compliance with En14792• 180°C heated detector• Fast response time• Virtually no quenching influence (measuring

chamber under vacuum)

in Situ multi-GAS AnAlySEr

PArtiCulAtES AnAlySEr

DioxinS AnD FurAnS SAmPlEr

MIR IS BETA 5 M AMESA®

Multi-Gas Infrared GFC AnalyserA complete “all in one compact” system based on the tried and tested proven MIR 9000 analyser and SEC sampling system, for multi-gas measurements.

ß-ray attenuation Analyser The BETA 5M allows continuous precise and representative measurement of particulate mass by Beta attenuation combined with Isokinetic sampling.

Isokinetic long term SamplerThe AMESA utilises the modified cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other organic contaminants.

• Fast and simultaneous measurement from a choice of HCl, no, no2 (nox), so2, Co, Co2, HC, CH4 (toC), HF, n2o, o2 at the sampling location

• Heated probe with choice of materials and lengths to suit the application

• robust and reliable design, built in a stainless steel tight box enclosure

• Designed for measurement of dry and corrosive sample, with built-in exclusive sample dryer system (same as in sEC Box)

• integrated air drying and handling system• simultaneous measurements of up to

10 gases (on a dry basis)• Automatic cross interference correction• reproducible and highly accurate; excellent

calibration stability with automatic optical check• intrinsic security with on-board residual

H2o measurement• on-board paramagnetic cell for long term

o2 measurement • Powerful remote control and display functions • MCERTs certified to En15267-3• QAL1 as defined by En14181• QAL3 compliance to En14181

• Wide range of heated sampling probe materials and lengths to suit the application

• Fixed or flexible sampling probes available to suit installation

• isokinetic sampling by built-in Pitot tube within the sampling probe

• Designed for measurement of wet and corrosive sample

• robust and reliable design for withstanding the harshest of environments

• no interference on measurement due to water or particulate characteristics (size, shape and colour)

• Excellent calibration stability• Calibration by on-board standard foil into

control cabinet (manual calibration)• optional daily calibration system available• on-board leak check of sampling system as

per EPA testing requirements• serial link rs232 / rs422• Compliant with US EPA and ISO standards

• isokinetic sampling by built-in Pitot or Prandtl tube on sampling probe

• Automatic continuous sampling from 6 h up to 6 weeks (Programmable)

• Adsorption on exclusive XAD-ii cartridge • Dioxins of all 3 phases (gaseous, solid

and liquid bounded) are collected in one cartridge

• High efficient dust filter• Fully automated solution with stored

datas on a removable srAm card or usB flashdrive

• Cooled probe in different materials and lengths to fit the application

• TUV & MCERTs certified• successfully tested under the US ETV

verification program• EPA method 23A compliant• upgrades for continuous mercury (Hg)

sampling or other contaminants such as heavy metals available as option

mAin APPliCAtionS:• municipal, industrial & Hospital Waste incinerators • Power & Combustion • gas turbines • Biomass • Cement Kilns • Pulp & Paper • Denox (snCr,sCr) • industrial Boilers & Furnaces in Chemical & Petrochemical Plants • Process Control • metal & steel industry...

EnvironmEntAl DAtA mAnAGEmEnt SoFtWArE WEx®

For compliance with ever-changing regulations and directives, the data managing system is an integral and the optimisation of environmental monitoring. our WEX® has been designed with this constant target in mind, as a real-time, web-enabled software suite for the control and the management of all continuous emission monitoring in accordance with latest international regulatory standards.WEX® is fully compliant with EN14181, QAL2 QAL3, ISO7168, ISO8258 and assume automatic comparison with mandatory Emission Limit Values (ELV), Automatic management and calibration of Automatic measurement system (Ams) as QAL 2 procedures and QAL3 (Ams drifts and accuracy control) with on-board control charts (shewart, EWmA, Cusum). WEX® can also provide some specific function as simulation of continuous emission impacts, real field data integration or Cmms (Computerized maintenance management system). WEX® is a powerful solution for the management of your entire Continuous Emissions Monitoring System.

EnvironmFor compliance with ever-changing regulations and directives, the data managing system is an integral and the optimisation of environmental monitoring. software suite for the control and the management of all continuous emission monitoring in accordance with latest international regulatory standards.WEXEmission Limit Values QAL 2 procedures and QAL3 (AWEXor CWEX

All our analysers are equipped with interactive menu-driven display allowing user-friendly and intuitive interface for the operator, with LAn connection and embedded Communication Protocol for WEX® management software.

• more than 160 AmEsA® in use and 16000 sampling’s already realised worldwide

• over 15 years of experience

Lowest / Highest available ranges, expressed in mg/m3 (or % when indicated)

HCl SO2 NOx NOx (CLD) N2O CO CO2 (%) CH4 TOC HF NH3 H2O (%) O2 (%)

MIR 9000 0-15 / 5000 0-75 / 5000 0-200 / 5000 0-20 / 1000 0-75 /10 000 0-10 / 100 0-10 / 1000 0-50 / 5000 0-20 / 300 0-10 / 25

MIR 9000 CLD 0-15 / 5000 0-75 / 5000 0-200 / 5000 0-20 / 2000 0-20 / 1000 0-75 /10 000 0-10 / 100 0-10 / 1000 0-50 / 5000 0-20 / 300 0-10 / 25

MIR 9000H 0-15 / 500 0-30 / 40 0-10 / 25

MIR IS 0-15 / 5000 0-75 / 5000 0-200 / 5000 0-20 / 1000 0-75 /10 000 0-10 / 100 0-10 / 1000 0-50 / 5000 0-20 / 300 0-10 / 25

MIR FT 0-15 / 500 0-75 / 2000 0-200 / 2000 0-100 / 500 0-75 / 10 000 0-10 / 30 0-10 / 1000 0-50 / 1000 0-15 / 100 0-15 / 500 0-30 / 40 0-10 / 25

MIR 9000 Blue Box 0-200 / 1500 0-200 / 1500 0-200 / 2000 0-10 / 20 0-10 / 25

Graphite 52M 0-10 / 10 000 0-10 / 10 000

0-15 / 5000

0-15 / 5000

0-15 / 5000

0-15 / 500

x

0-200 / 5000

0-200 / 5000

0-200 / 5000

0-200 / 2000

0-200 / 1500

2

0-20 / 1000

0-20 / 1000

0-20 / 1000

0-100 / 500

2

0-10 / 100

0-10 / 100

0-10 / 100

0-10 / 30

0-10 / 20

0-50 / 5000

0-50 / 5000

0-50 / 5000

0-50 / 1000

0-10 / 10 000

3

0-15 / 500

0-15 / 500

2

0-10 / 25

0-10 / 25

0-10 / 25

0-10 / 25

0-10 / 25

0-10 / 25