Pipe Flow Formulascon·sult·an·cy
A professional practice that gives expert advice within a particular field – in our case, by providing engineering EPC services.
The work of offering such service
*
*
Point Engineering Ltd.
Point Engineering Consultancy
Point Engineering Limited has a broad range of capabilities in the design and construction of many types of structures either with steel or reinforced concrete materials.
Point Engineering’s practice in the oil and gas engineering services dates back to the turn of the century. Some of the most notable projects among many are:
Total’s O.U.R. pipeline design and construction consultancy
Shell’s Trans-Niger Pipeline Loopline design
Total’s USAN subsea manifold design
Seplat 50,000-barrel buffer tanks design and construction expert services
Total Control Station Construction Supervision
NPDC Dual Lane Concrete Bridge (for Heavy Truck Traffic) Design
MPN’s Post Underwater Inspection Risk Assessment of 79 platforms for Fitness for Purpose and Continuity of Use
And many more....
Point Engineering Proposal for Services
Point Engineering Limited are happy to propose to perform the following tasks during the construction phase of the 17-storey reinforced concrete building project:
Pre-Construction Planning and Assurance
Review the building design and applicable Bill(s) of Quantities (BOQ).
Define/Verify precedence relationships among activities (to determine the Critical Path during the construction phase)
Estimate/Review estimate of activity durations
Review/Check/Write applicable construction scope(s) or work.
*
*
Point Engineering Proposal for Services
Point Engineering Limited are happy to propose to perform the following tasks during the construction phase of the 17-storey reinforced concrete building project:
Construction Management and Supervision
Coordinate specialized laboratory testing and inspections (i.e. concrete cube tests for crushing strength conformity to standards).
Coordinate field reviews.
Assurance of compliance with design documents
*
*
Final (and approved) Bill of Quantities
Final (and approved) list of standards and specifications
Final reinforcement schedule(s).
Site survey(s)
Any additional items elucidated during initial discussions.
*
*
Point Engineering Ltd.
Activity-On-The-Node (AON) Format
AON format is recommended for successful construction project management for the following reasons:
Eliminates confusion, and allows PM to adjust for problems that may arise during the construction phase.
AON format is "activity" oriented.
*
*
Shows activity inter-relationships.
Allows PM to make timely decisions.
*
*
AON Disadvantages
The AON format does not solve engineering problems that may occur.
Does not make planning decisions for you.
*
*