condensed catalog - Rayos X y Serviciosrayosxyservicios.com.mx/img/Manometros/HOKE...

condensed catalogHOKE Condensed Catalog Index

Needle Valves 1Metering Valves 3Ball Valves 4Actuated Ball Valve Packages 7Plug Valves 8Fluid Control Components 9Packless Valves 11Manifolds 13Sampling Cylinders 14Analytical Products 15HOKE Gyrolok®

Features and Benefi ts 16

General Information 17

Pipe Thread Information 17

Tube Fittings at a Glance 18

Precision Instrument Pipe Fittings 20

HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • [email protected]

HOKE Condensed Catalog

Needle Valves

1

Applications:

• Cylinder valves

• Panel board instrumentation

• Pilot plants for corrosive liquids and high

pressures

• Research laboratories

Maximum Operating Pressure:

• 6000 psig @ 70° F

(414 barg @ 21° C)

Operating Temperature Range:

• -65° F to +450° F (-54° C to +232° C)

Orifi ce Size:

• .187″ (4.8 mm)

Forged Body Needle Valves 1700 SeriesC

v Factors:

• .31

Features:

• Choice of 316 stainless steel or Monel®

• Choice of metal or plastic handle

• Dyna-Pak® packing below stem threads

provides leak-tight service

• Non-rotating stem point prevents galling

and extends valve life

• Hardened thread gland provides long

cycle life

Applications:

• Corrosive handling

• Sampling systems

• Metering service


• 5000 psig @ 70° F

(345 barg @ 21° C)


• -65° F to +450° F (-54° C to +232° C)

Orifi ce Sizes:

• .086″ to .313″ (2.2 mm to 8.0 mm)

Cv Factors:

• .12 to 1.40

Features:

• Corrosion-resistant 316 stainless steel


prevents thread lubricant wash out

• Vee-point stem option for moderate

metering

• Hastelloy® C-276 stem point

Bar Stock Needle Valves 2200 Series

Applications:

• Hydraulic systems

• High temperature service to 600° F

• Gas sampling

• Test stands


• 6000 psig @ 70° F

(414 barg @ 21° C)


· -65° F to +600° F (-54° C to +316° C)

Orifi ce Sizes:

· .188″ to .313″ (4.8 mm to 8.0 mm)

Cv

Factors:

• .40 to 1.20

Features:

• Variety of materials—brass, 316 stainless

steel, carbon steel

• Choice of all-metal stem point or non-

rotating replaceable PCTFE tip for long

seat life

• Choice of Dyna-Pak® packing or high

temperature packing to 600° F (316° C)

• 1/8″ to 1/2″ end connections

Bar Stock Needle Valves 2100 Series

2 HOKE Condensed Catalog

Needle Valves

Applications:

• High temperature service to 700° F

• Corrosives

• Reactive and hot condensates


• 4000 psig @ 70° F

(276 barg @ 21° C)

• 2500 psig @ 700° F

(172 barg @ 370° C)

Maximum Operating Temperature:

• 700° F (371° C)

Orifi ce Size:

• .312″ (7.9 mm)

Cv Factor:

• 1.10

Features:

• 316 stainless steel forged body

• Union bonnet design provides maximum

reliability

• 17-4PH stainless steel non-rotating stem

tip

• Grafoil® packing for high temperature

service

• Stem backseat for added safety

Forged Body Needle Valves 2800 Series

Applications:

• Refi neries

• Chemical processing

• Oil & Gas drilling


• 6000 psig @ 70º F

(414 barg @ 21º C)


• -65° F to +450° F (-54° C to +232° C)

Orifi ce Size:

• .187″ (4.8 mm)

Cv Factor:

• .60

Features:

• All wetted components constructed

of high chrome, high nickel austenitic

stainless steel for uniform chemical

corrosion resistance including hydrogen

sulfi de

• 316 stainless steel body

• Lock pin secures packing nut for safety

• Dyna-Pak® packing below the stem

threads prevents fl uid from contacting

stem threads

• 17-4PH stainless steel non-rotating stem

tip for extended cycle life

• All valves tested for bubble-tight leakage

at both seat and packing

Needle Valves for Sour Gas Service 2700 Series

Applications:

• Steam service in power plants

• Hot condensates


• 6000 psig @ 70° F (414 barg @ 21° C)


• -100° F to + 1000° F @ 1750 psig max.

-75° C to + 538° C @ 120 bar max.

Orifi ce Sizes:

• 0.170”, 0.250”, 0.312”, and 0.437”

(4.3mm, 6.4mm, 7.9mm, and 11.1mm)

Cv Factors*:

• 0.47, 1.09, and 1.20

Features:

• Designed for high pressure / high

temperature use

• Meets ANSI 900# specifi cations

• Grafoil® packing below threads isolates

threads from media.

• Non-rotating stem tip prevents galling

• Bubble-tight leak testing at both seat and

packing

• Leak-tight fractional end connections

available up to 1”; metric end connections

up to 25mm

Severe Service Needle Valves 2219 Series

* Cv factor for 0.437” orifi ce not available at time of publication

HOKE Condensed Catalog

Needle Valves

3

Applications:

• Instrument air lines

• Gas sampling lines

• Test stands


• 5000 psig @ 70° F

(345 barg @ 21° C)


• -65° F to +450° F (-54° C to +232° C)

Orifi ce Sizes:

• .060″ to .312″ (1.5 mm to 7.9 mm)

Cv

Factors:

• .07 to 1.10

Features:


steel, carbon steel

• Dyna-Pak® packing provides leak-tight seal

and low operating torque

• Choice of PCTFE, regulating, Vee-point, or

blunt stem tips

• Panel mounting possible without packing

disruption

• Globe and angle patterns

Forged Body Needle Valves 3700, 3800, 3900 Series

Applications:

• Fine metering for gas or vapor analysis

• Sampling and analyzing water and air

pollution

• Chromatographs and mass spectrometers


• 5000 psig @ 70° F

(345 barg @ 21° C)


• -65° F to +450° F (-54° C to +232° C)

Orifi ce Sizes:

• .047″ (1.19 mm)

Cv Factors:

• .010 (1° stem)

• .024 (3° stem)

Features:

• Choice of brass or 316 stainless steel

• Accurate metering and consistent

reproducibility of fl ow settings

• Precision orifi ce and close thread

tolerances eliminate hysteresis

• Micrometer vernier handle provides visual

control and precise fl ow settings


provides leak-tight service

Milli-Mite® Forged Metering Valves 1300 SeriesMetering Valves

Applications:

• Chromatography

• Mass spectroscopy

• Sampling and fi ne metering

• Pollution-analyzing instrumentation


• 5000 psig @ 70° F

(345 barg @ 21° C)


• -20° F to +250° F (-29° C to +121° C)

Orifi ce Sizes:

• .031″ (.79mm)

Cv Factor:

• .0008

Features:


• Low internal volume for accurate fl ow

• New dial indicator provides instant reading

of stem position

• Non-rotating stem provides smooth fl ow

pattern

• Ideal repeatability of fl ow settings

• O-ring seals below stem thread

Micro-Mite® Forged Metering Valves 1600 Series


Applications:

• Metering liquids and gases

• Laboratory sampling

• Gas chromatographs and analyzers


• 3000 psig @ 70° F

(207 barg @ 21° C)


• -60° F to +250° F (-51° C to +121° C)

Orifi ce Sizes:

• .062″ (1.57 mm)

• .125″ (3.17 mm)

Cv Factors:

• .012 (.062″ orifi ce, 1° stem)

• .086 (.062″ orifi ce, 8° stem)

• .30 (.125″ orifi ce, 8° stem)

Features:


• Spring-loaded stem prevents galling and

possible orifi ce enlargement

• PCTFE seat allows positive shutoff

• 1° stem is available for fi ne metering

• Panel mounting is standard on all valves

• Optional micrometer handle

Bar Stock Metering Valves 2300 Series

Metering Valves

Applications:

• Chemical processing

• Petroleum refi ning

• Gas distribution


• Hydraulic fl uids

• Steam service

• Chlorine service

Operating Pressure Range:

• 2-Way • Vacuum to 2500 psig @ 70° F

(172 barg @ 21° C)

• 3-Way • Vacuum to 1500 psig @ 70° F

(103 barg @ 21° C)


• -65° F to +500° F (-54° C to +260° C)

Orifi ce Sizes:

• 2-Way - 0.09” to 0.88”

(2.3 mm to 22.4 mm)

• 3-Way - 0.09” to 0.63”

(2.3 mm to 16.0 mm)

Cv Factors:

• 2-Way - 1.0 to 38

• 3-Way - 1.0 to 9

Features:

• Energized PTFE stem seal compensates

for temperature and pressure with zero

leakage to over 50,000 cycles

• Live-loaded seats provide zero leakage

and long cycle life

• Safety—blowout-proof, grounded stem

prevents static charge build-up

• Fully encapsulated bolts

• Enclosed seats and seal reduce cold fl ow

and extend operating pressure range

• Remote actuation packages available

2- and 3-Way 3-Piece Bolted Ball Valves 7 Series

Ball Valves

HOKE Condensed Catalog 5

Ball Valves

Pneumatic Actuators for 7 Series Ball Valves


• standard: -4° F to +194° F (-20° C to +90° C)

• optional high temperature model to +320° F (+160° C)

Features:

• Available in Double Acting (air to open and air to close) or Spring Return (normally open or

normally closed) models.

• Durable construction stands up to harsh environmental conditions, increasing durability

and reliability.

• Compact size provides greater installation fl exibility in tight spaces.

• Field assembled valve / actuator option provides simple conversion of manual valve to

pneumatic operation. This increases fl exibility and decreases installation costs.

• Top mounted actuator allows for conversion from manual valve to pneumatic operation

without disrupting packing. Ensuring leak-tightness and imp roving reliability.

• Long cycle life results in reduced maintenance requirements and lower cost of ownership.

High Cycle Ball Valves D, DL, T, TL SeriesApplications:

• Instrumentation lines liquid or gas

• Pressure test stands high or low pressure



• 316 SS and Monel®:

• D & DL Series: 6000 psig @ 70° F

(414 barg @ 21° C)

• T & TL Series: 3000 psig @ 70° F

(207 barg @ 21° C)

• Brass:

• D, DL, T, & TL Series: 3000 psig @

70° F (414 barg @ 21° C)

Cycle Life:

D, T = 50,000; DL, TL = 100,000


• -40° F to +350° F (-40° C to +177° C)

Orifi ce Sizes

• .093” – .250” (2.4 mm–6.4 mm)

Cv Factors

• .23–1.44

Features:

• Delta stem seal (DL) and spring-loaded

PTFE seal (TL) provide high cycle life over

100,000 cycles.

• Live-loaded seats compensate for wear

and temperature cycling with zero

leakage.

• Static-grounded stem prevents static

discharge for safety.

• Bi-directional (D & T)

• Uni-directional (DL & TL)

• Optional factory-assembled actuator

ensures lower installed cost.


Ball Valves

Applications:




• 6000 psig @ 70° F

(414 barg @ 21° C)


• -40° F to +350° F (-40° C to +177° C)

Orifi ce Sizes:

• .093″ to .187″ (2.4 mm to 4.8 mm)

Cv Factors:

• .15 to .57

Features:


• Dyna-Pak® packing provides trouble-free

service and low operating torque

• Encapsulated TFE or Nylatron® seats

eliminate cold fl ow and distortion

• Handle indicates fl ow direction

Selectomite® 3-Way Ball Valves 71 and 76 Series

Applications:

• High pressure instrument lines

• Gas sampling lines

• Chromatographs

• Hydraulic test stands


• 6000 psig @ 70° F

(414 barg @ 21° C)


• -20° F to +425° F (-29° C to +218° C)

Orifi ce Sizes:

• .093″ to .250″ (2.4 mm to 6.4 mm)

Cv Factors:

• .23 to 1.40

Features:

• Variety of materials brass, 316 stainless

steel, Monel®

• Floating ball uses system pressure to assist

sealing and reduce operating torque

• Dyna-Pak® packing provides long, trouble-

free service and low operating torque

• Quarter-turn handle gives visual fl ow

indication

• Forged body for extra strength

• Dual seats provide leak-tight bi-directional

sealing

Flomite® 2-way Integral Panel Mount 71 Series

Applications:

• High pressure test stands

• Sampling lines

• Instrument lines

• Analyzer labs


• 6000 psig @ 70° F

(414 barg @ 21° C)


• -40° F to +350° F (-40° C to +177° C)

Orifi ce Sizes:

• .093″ to .375″ (2.4 mm to 9.5 mm)

Cv Factors:

• .15 to 1.4

Features:


steel, Monel®

• Oval trip-proof handle gives visual fl ow

indication

• Floating ball uses system pressure to assist

sealing and reduce operating torque

• Fixed end fi ttings to prevent accidental

disassembly

Ultramite™ Forged Body Ball Valves 70 Series


Applications:

• Hydraulic test stands

• Handling slurries

• Pilot plants

• Pneumatic systems


• 5000 psig @ 70° F

(345 barg @ 21° C)


• -20° F to +350° F (-29° C to +177° C)

Orifi ce Size:

• .375″ (9.5 mm)

Cv Factor:

• 3.4

Features:

• Choice of brass, 316 stainless steel, or

Monel®

• Choice of Viton® O-rings or TFE washers

for improved corrosive / temperature

compatibility

• Encapsulated TFE seats eliminate cold fl ow

and distortion

• Dual seats provide leak-tight bi-directional

fl ow

• Nylon oval handle or optional metal lever

handle

• Blowout-proof stem

Rotoball® 2-Way Ball Valves 72 Series

Applications:

• Compact interlocking of multiple actuators

• Ideal for instrumentation panels

• Actuates small and mid-sized ball valves


• 125 psig @ 70° F (9 barg @ 21° C)


• 0° F to +400° F (-18° C to +204° C)

Features:

• Small envelope (2¼″ × 2¾″ × 3½″)

• Can actuate two valves simultaneously

• Multiple mounting options

• Uses standard shop air

• Available in spring return and double

acting modes

• 90° and 180° operation

Space Saver® Air Actuators 0700 Series

Ball Valves

Applications:

• Automated instrument and process

systems

• Test areas

• Corrosive atmospheres

Voltage:

• AC – 115 VAC/60 cycles

• DC – 24 VDC

Rated Current:

• AC – 1.6 amps

• DC – .63 amps

Cycle Time:

• AC/DC – 2.5 seconds per 90° of travel

Power Consumption:

• AC – 57 watts

• DC – 15 watts

Features:

• Position indicator switches are standard

• Compact design for small-space

installation

• Choice of weatherproof or explosion proof

enclosures

• Thermal overload relay prevents motor

burnout

• Manual override allows for manual valve

operation

Electrically Operated Air Actuators 0100 Series


Ball Valves

Applications:

• Lines containing small solid impurities

• Instrumentation lines containing viscous

fl uids or slurries

• Systems requiring routine cleaning

• Systems requiring fl ow regulation and full

fl ow capabilities


• 6000 psig @ 70° F

(414 barg @ 21° C)


• -20° F to +250° F (-29° C to +121° C)

Orifi ce Sizes:

• .187″ and .250″ (4.7 mm and 6.3 mm)

Cv Factors:

• .83 and 1.20

End Connections:

• 1/4″ to 1/2″ NPT

Features:

• Back seating is standard

• High Cv and rodability

• Flow regulation similar to that of a needle

valve

• Helps reduce fugitive emissions

• Extended valve life

• Replaceable seat

Rising Stem Plug Valve: 7400 Series

Applications:


• Test benches

• Sampling lines

• Pilot plant instrumentation

• Low pressure air lines


• 3000 psig @ 70° F

(207 barg @ 21° C)


• -20° F to +400° F (-29° C to +204° C)

Orifi ce Sizes:

• .093″ to .187″ (2.4 mm to 4.8 mm)

Cv Factor:

• .74

Features:


• Oval trip-proof handle provides visual fl ow

indication

• Dual retaining rings prevent accidental

plug removal

• Throttling capabilities

• Vented version for down stream venting

• Retainer allows 1000 psig (69 barg) reverse

operating pressure

Quarter-Turn Plug Valves 7300 Series

Applications:

• Distribution systems

• Manifold switching



• 6000 psig @ 70° F

(414 barg @ 21° C)


• 0° F to +350° F (-18° C to +179° C)

Orifi ce Sizes:

• .166″ and .187″ (4.2 mm and 4.8 mm)

Cv Factors:

• .47 to .66

Features:


• Trunnion bearings eliminate galling

• Blowout-proof stem

• Spring-loaded ball engages every 90° to

indicate full port position

• Choice of PTFE or Nylatron® seats

Multimite® 4- and 5-Way Trunnion Valves 79 Series

Plug Valves


Applications:

• Prevention of reversed fl ow

• Locking pressure in hydraulic cylinders

• Vent valve to purge system


• 6000 psig @ 70° F

(414 barg @ 21° C)


• -40° F to +350° F

(-40° C to +177° C)

Cracking Pressures:

• 1/3, 2, 10 and 25 psig (.02, .14, .69 and 1.7

barg)

Orifi ce Sizes:

• .187″ and .422″ (4.8 mm and 10.7 mm)

Cv Factors:

• .3 and 2.4

Features:


steel, Monel®

• Ball and poppet designs are standard

• Poppet models provide large fl ow with

minimum chatter and fl uctuation

• Ball models provide fast open-close

response

• O-ring seat provides leak-tight shut-off

Ball and Poppet Check Valves 6100 & 6200 Series

Fluid Control Components

Applications:

• Beverage dispensing equipment

• Gas pilot plants

• Petrochemical test labs

• Off shore platform heating lines

• Pharmaceutical sterilization and packaging

systems


• 5 psig to 6000 psig (0-414 barg)


• -70° to +550° F (-57° to +288° C)

Orifi ce Sizes:

• 0.082”, 0.094:, 0.188” (2.1 mm, 2.4 mm,

4.8 mm)

Relief Ranges ΔP:

• 5 - 550 psig (0 - 38 barg)

• 150 – 2500 psig (10 - 172 barg)

• 150 - 5000 (10 - 345 barg)

• 5000 – 6000 psig (345 – 414 barg)

Features:

• 316 stainless steel body

• Narrow pressure ranges can be factory

pre-set

• Can be used with any liquid or gas service

• Caps and bonnets are pre-drilled for lock

wire

• PED certifi cation and CE marking standard

for all models

Relief Valves R6000 Series

Applications:

• Chromatographs and mass spectrometers

• Test benches

• Coolant lines


• 200 psig @ 70° F

(14 barg @ 21° C)


• -20° F to +300° F (-29° C to +149° C)

Orifi ce Sizes:

• .125″ to .219″ (3.2 mm to 5.6 mm)

Cv Factors:

• .23 to .60

Features:

• Brass or 316 stainless steel

• Elastomeric seals for vacuum service

• Toggle handle provides instant on-off

control

• Compact design

Forged Body Toggle Valves 1500 Series


Applications:

• Back pressure protection

• Prevents reverse fl ow

• Protection of solenoids, analyzers,

regulators, etc.


• 0 to 6000 psig (0 to 414 barg)


• -65° F to +550° F

(-54° C to +288° C)

End Connection Sizes:

• 1/8″ to 1″, 6 mm to 25 mm

Crack Pressures:

• .5 to 20 psig (.03 to 1.4 barg)

Cv Factors:

• .32 to 7.4

Features:

• Resilient O-ring seat provides cushioned

quiet closing and zero leakage

• Floating O-ring is continually cleaned:

contaminants do not prohibit sealing

• Various materials of construction: can be

used with any liquid or gas service

• Full fl ow with minimal restriction for

maximum Cv rates

Check Valves CVH Series

Applications:

• Gas delivery systems

• Analyzer sample lines

• Cabinet purge gas systems

• Diff erential pressure cell lines


• Zero to 6000 psig (414 barg)


• -320° F to +900° F

(-196° C to +482° C)

End Connection Sizes:

• 1/4″, 3/8″, 1/2″, 6 mm through 14 mm

Features:• Flow switches that automatically close if a

fl ow spike occurs, preventing uncontrolled

release of system fl uid

• Automatic and manual reset poppets

• Can be used with any liquid or gas service

• Anti-clog wire prevents clogging of bleed

port

Excess Flow Valve: XVH Series

Applications:

• Trapping of foreign particles

• Protection of sensitive equipment

• System purging

• Pressure Damping


• Brass

• 3000 psig @ 70° F

(207 barg @ 21° C)

• Stainless steel

• 5000 psig @ 70° F

(345 barg @ 21° C)


• -60° F to +450° F (-51° C to +232° C)

Filtering Range:

• 2 to 55 microns

Cv Factors:

• .006 to .420

Features:

• Choice of brass or 316 stainless steel bodies

• 316 stainless steel elements

• Choice 6310 inline, 6320 removable, or

6330 bypass series

• Bypass models permit purging and

sampling of process fl uid

Inline -, Removable- and Bypass Micron Filters 6300 Series

6310 Inline Series

6330 Bypass Series (6320 is similar, except

no outlet on top)

Fluid Control Components


Applications:

• Critical gas analysis

• Reactive and toxic fl uids

• Vacuum systems bake-out


• High vacuum

(10-5 torr) to 1000 psig @ 600° F

(69 barg @ 316° C)


• -40° F to +600° F (-40° C to +316° C)

Orifi ce Sizes:

• .059″ and .170″ (1.5 mm and 4.3 mm)

Cv Factors:

• .06 and .35

Internal Volume:

• .08 cubic inches (1.3 cc)

Features:


• Choice of blunt, Vee-point, or PCTFE tips

• Removable nylon handle for high

temperature bake-out

• Bellows silver-soldered to body

Bellows Sealed Valves 4100 Series

Packless Valves

Applications:


• Reactive and toxic fl uids

• Cryogenics

• High vacuum systems


• High vacuum (10-5 torr) to 2000 psig @

600° F (138 barg @ 316° C)


• -320° F to +1200° F

(-195° C to +649° C)

Orifi ce Size:

• .156″ (4.0 mm)

Cv Factors:

• .33 and .36

Internal Volume:


Features:


• Positive plug return prevents plug from

sticking

• Torque not transmitted to bellows

• Secondary seal in upper bonnet for added

protection

• Heavy-duty bellows for long life


Applications:

• High purity

• Diff usion furnaces

• Gas panels

Operating Pressure Ranges:

• Actuator: 50 to 150 psig @ 70° F

(3.4 to 10.3 barg @ 21° C)

• Valve: vacuum to 350 psig

(24 bar – Normally Open)

• Valve: vacuum to 200 psig

(14 bar – Normally Closed)


• -40° F to +250° F (-40° C to +121° C)

Orifi ce Size:

• .170” (4.3 mm)

Cv Factor:

• .28

Internal Volume:


Features:

• Compact design for small-space

installations

• Valve body made of corrosion-resistant 316

stainless steel

• Actuator body made of lightweight

aluminum

• Choice of Normally Open or Normally

Closed models

• Replaceable PCTFE seat extends valve life

Air Actuated Bellows Valves 0300 Series


Applications:


• Laboratories



• High vacuum (10-5 torr) to 300 psig @ 250°

F (21 barg @ 121° C)


• -20° F to +250° F (-29° C to +121° C)

Orifi ce Sizes:

• .156″ and .281″ (4 mm and 7.1 mm)

Cv Factor:

• .70

Internal Volume:


Features:

• Choice of brass or Monel®

• Protective handle limits escape of process

fl uid in case bellows ruptures

• Encapsulated PCTFE seat

• Bellows is sealed to body with PCTFE

gasket

• Bellows assembly is easily replaced


Diaphragm Valves 4600 SeriesApplications:

• High temperature bake-out systems



• High vacuum (10-5 torr) to 300 psig @ 70° F

(21 barg @ 21° C)


• -65° F to 600° F (-54° C to +316° C)

Orifi ce Size:

• .125″ (3.2 mm)

Cv Factor:

• .2

Internal Volume:


Features:

• Monel® construction

• Diaphragm provides low internal volume

and low dead space

• Compact size for small-space installations

• Gasket and welded models

Packless Valves

Applications:

• Analytical Instrumentation

• Petrochemical

• Pharmaceutical

• Chemical


• Vacuum (50 torr) to 3600 psig (248 barg)


• -40° F to +400° F (-40° C to +204° C)

Orifi ce Size:

• .110″ (2.8 mm)

Cv Factors:

• 0.17

Low Valve Internal Volume:

• 0.16 cc

Features:

• Totally free of springs, bellows, packing, O-

rings and lubricants in process wetted area

• Metal-to-metal seals to atmosphere: no

leaching of undesirable elements into the

fl ow stream

• Elgiloy® diaphragms insure the utmost in

corrosion resistance and life span

2-Way Diaphragm Valves DV1 Series


Manifolds

Application:

• Diff erential pressure transmitters

• Chemical

• Pharmaceutical

• Petrochemical

Maximum Operating Pressures:

• PTFE packing:

6000 psig @ 212°F (414 barg @ 100°C)

• Graphoil® packing:

6000 psig @ 212°F (414 barg @ 100°C)

3300 psig @ 842°F (288 barg @ 450°C)


• PTFE: -0° F to +392° F

(-18° C to +200° C)

• Grafoil®: -0° F to +842° F

(-18° C to +450° C)

Features:

• Remote (or pipe) mounting can be

independently mounted

• Direct (or fl ange) mounted manifolds

reduces the number of connections and

possible leak points

• 2, 3, or 5 valve manifolds off er various levels

of process control & measurement

• Backseat stem

• One-piece non-rotating stem tip

minimizes seat galling

Instrument Manifolds 2-, 3-, 5-ValveGeneral Purpose Manifolds

Application:

• Diff erential pressure transmitters with

2.125 inch center to center process

connections.


• 6000 psig @ 70° F

(414 barg @ 21° C)


• -65° F to +600° F (-54° C to +316° C)

Features:

• Purge ports provided on process side of

block valves for applications requiring

continuous purging

• Dyna-Pak TFE or high-temperature 600° F

Graph-Lock /TFE wafer packing is standard.

• Non-rotating hardened metal stem tip

• Replaceable 316 stainless steel seats

prolong manifold life

• Dyna-Pak® PTFE wafer or high temperature

graphite / PTFE packing

• Choose pipe or fl ange outlet models

Trifold™ Needle Valve Manifold

Special Application Manifolds

Application:

• Block process impulse lines and perform

equalizing functions


• 6000 psig @ 70° F

(414 barg @ 21° C)


• 0° F to 300° F (-18° C to +149° C)

Features:

• Flange can be reversed for direct

mounting to an integral orifi ce type

transmitter

• Replaceable PCTFE seats extend valve life

• Rod through block valves

• Quarter-turn handle gives visual fl ow

indication

• Cam handles ensure proper valve

sequencing

Rotofold® Ball Valve Manifold


Special Applications Manifolds

Applications:

• Hydrocarbon sampling

• Gas sampling

• Snubbers in reactor feed lines


• 5000 psig @ 70° F

(345 barg @ 21° C)

Features:

• Choice of 12 diff erent capacities, 10 ml to 4

gallons

• Fabricated from seamless drawn tubing

with increased thickness in the threaded

area

• All models are internally sand-blasted

• Single- and double-ended cylinders are

standard

• Variety of materials—304 stainless steel,

Monel®, and various exotics available upon

request

Formed Sampling Cylinders

Applications:

• Hydrocarbon sampling


• Chemical reaction vessels


• 1800 psig (124 barg)

Features:

• Choice of 7 capacities ranging from 75 cc

to 3785 cc (1 gallon)

• Manufactured to DOT 3A or 3E

requirements

• All interior surfaces are sandblasted for a

uniform surface

• 316 Stainless Steel construction

Spun Sampling CylindersSampling Cylinders

Application:

• Diff erential pressure transmitters when

applied to gas fl ow measurement


• 6000 psig @ 70° F

(414 barg @ 21° C)


• 0° F to 300° F (-18° C to +149° C)

Features:

• Static or vent ports provided on

instrument side

• Replaceable ball seats and stem tips

extend service life, reducing cost

• Threaded mounting hole provide on all

models

• TFE standard packing on all valves

Pentafold® 5–Valve Manifold


Application:

• Over-pressure protection for HOKE sampling cylinders

BURSTING DISK MODELS


• 1400 to 1600 psig @ 70° F (97 to 110 barg @ 21° C)

• 1800 to 2000 psig @ 70° F (124 to 138 barg @ 21° C)

• 2600 to 3000 psig @ 70° F (179 to 207 barg @ 21° C)

• 3500 to 4100 psig @ 70° F (241 to 283 barg @ 21° C)

• 5400 to 6200 psig @ 70° F (372 to 428 barg @ 21° C)

SPRING RELIEF MODELS


• 350 to 400 psig @ 70° F (24 to 28 barg @ 21° C)

• 540 to 600 psig @ 70° F (37 to 41 barg @ 21° C)

Safety Relief Devices: 6700 SeriesOperating Temperature

Range (Both Models):

• -20° F to +250° F

(-29° C to +121° C)

Features:

• Spring relief models reseal

after venting excess pressure

• Inconel® rupture discs and

316 stainless steel body for

increased corrosion resistance

• Color-coded discs meet

requirements of CGA-S1.1

Sampling Cylinders

73S Series Selector ValvesApplications:

• Process analyzers

• Instrumentation

• Gas chromatography


• 500 psig @ 70° F (34.5 barg @ 21° C)

• 200 psig @ 350° F (13.8 barg @ 175° C)


• -40° F to +350° F (-40° C to +177° C)

Orifi ce Sizes:

• .051″ to .093″ (1.30 mm – 2.36 mm)

Cv Factor:

• .071 maximum

Features:

• 5-way or 7-way confi guration

• Wide temperature range

• Sliding seal principles

• Bi-directional fl ow

• GYROLOK® Tube Fitting or female NPT

connections

Applications:

• Gas or liquid chromatography

• Analytical equipment


• Rated for working pressures higher than

the tubing recommended for use


• -325° F to +800° F

(-198° C to +427° C)

Orifi ce Sizes:

• .013″ - .052″ (0.33 mm – 1.32 mm)

Features:

• Low dead volume

• Controlled ferrule drive

• Interchangeability

• Press-fi t or drop-in frits

Chromatography Fittings

Analytical Products


HOKE GYROLOK® Features and Benefi ts

Hand

Assembled

Fully AssembledFitting & Tube

6

2

7

81 3 96

BODY

15°

NUT

15°

R EAR FERRULE

FRONT FERRULE

FEATURES EXPLANATION BENEFITS

1. CONTROLLED FERRULE DRIVE

Roll-in locking action of rear ferrule:

During fi tting makeup, 15° angles close — between the rear ferrule and nut,

and between the rear ferrule and front ferrule — thus preventing overstress-

ing of tubing or excessively reducing tubing inside diameter.

Front ferrule shoulder: Front ferrule shoulder prevents body expansion and

nut jamming, caused by over-tightening.

Provides maximum user safety under high pressure/

vibration conditions. Prevents overstressing, which

causes tubing failure and possible injury.

System effi ciency is improved by maximizing fl ow.

Provides unmatched remake life.

Maximizes value and economy.

2. BUTT SEAL Provides a secondary seal and eliminates dead space. Maximizes fi tting leak integrity and user safety. Can seal

with scratched tubing. Increases accuracy in sampling

applications.

Reduces pump-down time in vacuum applications.

3. HOKE VALVES WITH

INTEGRAL HOKE

GYROLOK® END FITTINGS

Controlled ferrule drive prevents end connection expansion, thus prolonging

valve life and eliminating the need to use female-ended valves with separate

fi ttings.

Eliminates a possible leak path and extends valve life.

Long product life and maximum value.

Safety and economy.

4. GYROLOK® SAFETY

CHANGER NUT AND FERRULE

SETS

Nut and ferrule sets supplied on rods, already correctly oriented. (Not neces-

sary to handle ferrules when replacing components.)

Safest, simplest device for component replacement.

5. GYROGAGE Marks tubing to show that tubing has been properly inserted into fi tting, and

that fi tting has been properly tightened.

Maximum safety resulting from ability to verify correct

tube insertion and proper tightening.

6. SIZING ANGLE Slight taper in the base of the tube socket reduces possibility of tube sticking Less tube sticking during disassembly saves time and

money

7. SILVER-PLATED NUT

THREADS

Silver-plating extends fi tting life by preventing galling, up to 1200° F (649° C). Extended product life at extreme temperatures.

8. MATERIAL TRACEABILITY

ON FITTING BODY AND NUT

Bodies and nuts made of 316 Stainless Steel and Monel are heat code trace-

able to Certifi ed Material Test Reports.

Traceability provides added safety. Certifi ed Material Test

Reports are available for review and verifi cation.

9. PFAFERRULECOATING

Front ferrules—Sizes larger than 1” (25mm) are PFA coated. Increased resistance to media and atmospheric

corrosion.

10. SPECIAL HIGHTOLERANCE NPT

THREAD

ANSI Standard B1.20.1 - Basic + 1/4 to Basic +1. Provides a Safer more robust connection: 63% tighter

tolerance with up to six thread engagement, reduced

galling and vibration


General InformationThe HOKE GYROLOK® Design

HOKE GYROLOK® Tube Fittings have been

carefully designed and manufactured to pro-

vide a wide range of outstanding leak-tight

application capabilities.

Materials:

HOKE GYROLOK® fi ttings are available as

standard in brass, 304 stainless steel, 316

stainless steel and Monel®:

316 Stainless Steel Forgings: ASTM A-182Brass Bar Stock, Alloy 360: ASTM B-16316 Stainless Steel Bar Stock: ASTM A-479Monel® Forgings, Alloy 400: QQ-N-281Brass Forgings, Alloy 377: QQ-B-626Monel® Bar Stock, Alloy 405: QQ-N-281Brass Bar Stock, Alloy 353: ASTM B-453Monel® Bar Stock, Alloy K500: QQ-N-286

HOKE fi ttings are also available for custom

orders in special shapes and special materi-

als:

Hastelloy® C-276: HCInconel: INCTitanium: TIDuplex 2205: DX3Super Duplex 2507: D50254 SMO: 6MO

Contact your local HOKE Distributor for fur-

ther information.

Certifi ed Material Test Reports

(CMTRs):

Bodies and nuts of HOKE GYROLOK® fi ttings

in all materials other than brass are heat code

traceable. To obtain CMTRs for these compo-

nents, place separate orders for such items and

specify “CMTRs required on all items”.

Pressure Rating:

HOKE GYROLOK® fi tting ends(1) are rated for

working pressures higher than the tubing rec-

ommended for use with HOKE GYROLOK®.

Tubing should not be utilized at pressures

above its maximum allowable working pres-

sure. Check the HOKE Tubing Data Charts for

specifi c information. If no pressure is identifi ed for a given size and wall thickness of tubing,

that tubing is not considered suitable for the use with tube fi ttings.

Vacuum Rating:

HOKE GYROLOK® off ers deep vacuum capability. With good quality tubing, HOKE

GYROLOK® fi ttings will be leak-tight at vacuum levels of 10-9 torr while tested with a leakage

sensitivity of 10-9 sccs.

Temperature:

HOKE GYROLOK® fi ttings provide safe, reliable performance from cryogenic temperatures to

high temperature bake-out levels, depending on material.

• 316 stainless steel: -325° F to +800° F (-198° C to +427° C)

• Brass (copper tubing): -325° F to +400° F (-198° C to +204° C)

• Monel®: -325° F to +800° F (-198° C to +427° C)

Pipe Thread InformationHOKE GYROLOK® tube fi ttings are available with NPT (National Pipe Taper), BSP/ISO (British

Standard Pipe / International Standards Organization or unifi ed screw threads.

Straight or Parallel ThreadsSpecifi cation(s) Type Part Number or Suffi x

Designation

Sealing Method

American Standard

unifi ed screw threads

Male Fitting type ends in S, as in COS or

AOS

Generally utilizes an elas-

tomer O-ring to provide

sealing

RP to ISO 228/1

BS 2779

JIS B0202

Male Modifi er is B, following the unit of

measure for fractional (E) or metric

(M), as in 6CM4316EB

Metal-to-metal sealing to

DIN 3852, Form B

RS to ISO 228/1

BS 2779

JIS B0202

Male Modifi er is A, following the unit of


(M), as in 6CM4316EA

Utilizes a sealing washer

to provide sealing.

Reference DIN 3852,

Form A **

RG to ISO 228/1

BS 2779

JIS B0202

Female Modifi er is Z, following the unit of


(M), as in 6CF4316EZ

Sealing form meets DIN

3852, Form Z

** Female RP or RS ends available with Form X.

Tapered Thread InformationSpecifi cation(s) Type Part Number or

Suffi x Designation

Sealing Method

NPT M/F Fitting type ends in M or

F, as in CM or CF

Seal is made on the thread.

Thread sealant is required.

RT to ISO 7/1

BS 21

JIS B0203

DIN 2999

M/F

M/F

M/F

Male

Modifi er is C, following

the unit of measure for

fractional (E) or metric

(M), as in 6CM4316EC

Seal is made on the thread. Thread seal-

ant is required. The BSP/ISO thread uti-

lizes a diff erent angle and the number

of threads per inch may diff er from NPT.

Reference DIN 3852, form C.

CAUTION: (For stainless steel) Intermittent use to 1200° F (649° C) is possible, however,

prolonged exposure to temperatures over 800° F (427° C) is not recommended.

HOKE GYROLOK®

(1) Note: Pressure ratings may vary for other fi tting ends.


HOKE GYROLOK®

GYROLOK®


Design:HOKE Precision Instrument Pipe Fittings are machined from bar

stock or forgings in brass or heat traceable 316 stainless steel. The

fi tting design incorporates an NPT thread as standard and meets

the requirements of ANSI B 31.1 Power Piping Code, ANSI B 31.1

Chemical Plant and Petroleum Refi nery Piping, and Section VIII of

ASME Boiler & Pressure Vessel Code.

Available sizes include 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″ threads,

which exceed the requirements of ANSI B 1.20.1 for (NPT) tapered

pipe threads. Protective end caps prevent damage to exposed

threads.

Adapters, bushings, caps, couplings, crosses, elbows, nipples,

plugs and tees are designed to fi t most applications.

Materials:HOKE Precision Instrument Pipe Fittings are available as standard in brass and 316 stainless steel.

• 316 stainless steel Forgings: ASTM A-182

• 316 stainless steel Bar Stock: ASTM A-479

• Brass Forgings, Alloy 377: QQ-B-626

• Brass Bar Stock, Alloy 353 ASTM B-453

• Brass Bar Stock, Alloy 360: ASTM B-16

Features:• Fitting design meets the requirements of ANSI B 31.1 Power Piping Code, ANSI B 31L1 Chemical Plant and Petroleum Refi nery Piping, and

Section VII of ASME Boiler and Pressure Vessel Code.

• Fittings are machined from materials, which meet ASTM specifi cations.

• 316 stainless steel fi ttings are heat traceable.

• Available in wide variety of shapes and sizes.

• Threads exceed the requirements of ANSI B 1.20.1 for tapered pipe threads (NPT).

• Protective end caps prevent damage to exposed threads.

The following are trademarks of their respective companies: Monel® and Inconel, Special Metals Corporation; Hastelloy®, Haynes

International, Inc.; Viton®, E.I. Dupont. GYROLOK® is a registered trademark of Hoke, Inc.

Precision Instrument Pipe Fitting

FOR YOUR SAFETY

IT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE

FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND

MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS

SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN

CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE.

79104ENG • 09/12 • APS405

Proudly Distributed By:

CIRCOR Instrumentation Technologies (CIT) is the logical choice for fl uid control solutions.

We provide the lowest cost of ownership, off ering the best in class reliability and

availability of our products. We have global coverage, delivering value in the form of local,

fl exible service to meet our customer’s needs. CIT is a product group specializing in

instrumentation with orifi ce sizes typically up to 2”.

PO Box 4866Spartanburg, SC 29305-4866

Tel +1-864-574-7966Fax +1-864-587-5608

[email protected]

Our headquarters and ISO 9001:2008 certifi ed manufacturing facilities are located at

405 Centura CourtSpartanburg, SC, USA, 29303-6603

condensed catalog - Rayos X y Serviciosrayosxyservicios.com.mx/img/Manometros/HOKE...

Documents

Transcript of condensed catalog - Rayos X y Serviciosrayosxyservicios.com.mx/img/Manometros/HOKE...